系列缩水甘油醚类β-环糊精衍生物的合成及结构表征

以苯基缩水甘油醚、邻甲基酚缩水甘油醚及苯甲基缩水甘油醚(1～3)和β-环糊精为原料, 分别在弱碱水溶液(1.5%)和强碱水溶液(30%)中制备出系列缩水甘油醚类β-环糊精衍生物, 所得产物用自制硅胶色谱柱分离, 以V(正丙醇)∶V(水)∶V(浓氨水)＝6∶3∶1作为硅胶色谱柱分离纯化的洗脱剂, 得到单2位取代的苯氧基(或邻甲基苯氧基或苯甲氧基-2-羟丙基-β-环糊精(1a～3a)和单6位取代的苯氧基(或邻甲基苯氧基)-2-羟丙基-β-环糊精(1b～2b). 所得产品用薄层色谱、红外光谱、质谱和核磁共振波谱等手段进行了表征.     

Synthesis,Optical and Photovoltaic Properties of Porphyrin Dyes

The synthesis and optical absorption of a series of porphyrins, and the photoelectrochemical properties of TiO₂ solar cells sensititized with these porphyrins was investigated. The different types of porphyrins studied are designated by numbers: the reference compound 1 (Zinc(II) 5,15-bis(4-carboxylphenyl)porphyrin), porphyrin substituted with one triarylamine unit 2, and porphyrin substituted with two triarylamine units 3. The UV-Vis absorption spectra reveal that the substitutions result in large redshifts in both the Soret band (～ 60 nm) and the Q bands (～ 125 nm), as well as enhancement of optical absorption. The enhancement is even more pronounced in the long-wavelength region of 575–725 nm, where the absorption of porphyrin 3 is eight times that of porphyrin 1. The photoelectrochemical properties of the porphyrins were also studied by constructing porphyrin-sensitized TiO₂ solar cells. Under standard AM 1.5 sunlight, the porphyrin 1 cell yields a short-circuit current of ～ 1.26 mA/cm², an open-circuit voltage of ～ 0.564 V, and a fill factor of ～ 61%. The incident photon-to-current conversion efficiency is ～ 24% for porphyrin 1 and ～ 5–7% for porphyrins 2 and 3 at the Soret peak.     

HPLC simultaneous determination of arbutin,chlorogenic acid and 6′-O-caffeoylarbutin in different parts of Vaccinium dunalianum Wight

Arbutin (1), chlorogenic acid (2) and 6′-O-caffeoylarbutin (3) are three major components in Vaccinium dunalianum Wight with various promising bioactivities. A reliable, reproducible and accurate method for simultaneous and quantitative determination of 1–3 is developed by RP-HPLC analysis. This method should be appropriate for the quality assurance of unprocessed and processed materials of V. dunalianum. The contents of 1–3 in different parts of V. dunalianum from different origins were analysed. The content of 3 was much higher than those of 1 and 2, accounting for up to 31.76% in the dried leaf buds. Moreover, the leaf buds, flower buds and leaves showed a tendency towards higher contents of 1–3 than the other plant parts.     

Synthesen von Heterocyclen, 158. Mitt

Zusammenfassung 4-Benzoyl-5-phenyl-2.3-dihydrofuran-2.3-dion (1) wandelt sich beim Erhitzen auf 120–140° unter Abgabe von CO und CO₂ in 3.5-Dibenzoyl-2.6-diphenyl-4-pyron (2, 79% d. Th.) um. Nimmt man die therm. Zers. in Toluol in Gegenwart katalyt. Mengen Säure vor, so bildet sich 3.7-Dibenzoyl-4.8-diphenyl-1.5-dioxocin-2.6-dion (3, 90% d. Th.). Als gemeinsame Zwischenstufe wird das Dibenzoyl-keten (4) postuliert.

---

Syntheses of heterocycles, CLIV (reactions of cyclic oxalyl compounds, V)

4-Benzoyl-5-phenyl-2.3-dihydrofuran-2.3-dione (1) is converted at 120–140° under the loss of CO and CO₂ to yield 3.5-dibenzoyl-2.6-diphenyl-4-pyrone (2, 79%). However, 3.7-dibenzoyl-4.8-diphenyl-1.5-dioxocin-2.6-dione (3) is formed in 90% yield, if1 is decomposed in boiling toluene in the presence of acids. The dibenzoyl ketene4 is postulated as the common intermediate.

---

---

Herrn Prof. Dr.M. Pailer, Univ. Wien, mit freundschaftlichen Grüßen und besten Wünschen zum 60. Geburtstag gewidmet.     

Study on Complex of Re(III) with 3, 5-Br2-DMPAP by Electrochemistry and Application

ABSTRACT

The electrochemical character of a new reagent, 2-(3, 5-Dibrome-2-pyriclyiazo)-5-dimethylaminophenol(3, 5-Br₂-DMPAP) was studied in HAc-NaAc medium at pH=3.50. In single sweep polarography, the reduction potential of the complex wave (-1.05V) is more negative than that of the free ligand(-1.01V). The complex wave was proven to be an adsorption wave. The composition ratio of the complex was formed to be 1:1 using a molar ratio method. The current of the adsorptive peak at-1.05V was directly proportional to the concentration of Re(III) in the range of 1.5× 10^?8～7.0×10^?5mol/l. The microamount of Re in several samples of Chinese cigarettes determined with satisfactory accuracy and precision.     

Inorganic and Organic Arsenic Speciation in Seawaters by IEC-HG-AAS

Abstract

Arsenic (III), arsenic (V), monomethylarsonic acid (MMA), and dimethylarsinic acid (DMA) were separated by ion-exchange chromatography. The elution sequence was as follows: 1.5 M ammonia followed by 0.12 M hydrochloric acid yielding As(III) 1 M hydrochloric acid followed by water yielding first As(V) and then MMA. Detection was by hydride generation-atomic absorption spectrometry. No interference was noted from 13 metallic ions.

The method provides a good linearity, precision, accuracy, and sensitivity. It has been applied to the speciation of arsenic in seawaters from the North West coast of Spain (1200 Km).     

Ion-Exchange Method for Analysis of Four Arsenic Species and its Application to Tap Water Analysis

Abstract

Arsenic (III), arsenic (V), monomethylarsonic acid (MMA), and dimethylarsinic acid (DMA) were separated by ion-exchange chromatography. The elution sequence was as follows: 1.5 M ammonia followed by 0.12 M hydrochloric acid yielding As(III); 1 M hydrochloric acid followed by water yielding first As(V) and then MMA. Detection was performed by hydride generation-atomic absorption spectrometry.

The possible interferences of 13 metallic ions have been studied and none of them was found to interfere.

The method provides good linearity, precision, accuracy, and sensitivity. It has been applied to the speciation of arsenic in tap water samples from North West of Spain (a region about 29500 Km²).     

Multi-layer protruded electrodes for reducing the operating voltage and gamma shift of fringe-field switching LCDs

ABSTRACT

To reduce the operating voltage and gamma shift of the nematic liquid crystal display (LCD), a single-domain-protruded fringe-field switching (PFFS) electrode structure is designed. In this work, a kind of nematic liquid crystal (NLC) is introduced firstly. Then, the operating voltage and gamma shift of the proposed PFFS LCD are investigated under various electrodes’ parameters. Besides, its light leakage and contrast ratio are also discussed. The results show that the operating voltage of the PFFS LCD is only 1.40 V, here the electrodes’ width is 2 μm and electrodes’ gap is 4 μm. The gamma shift of the PFFS LCD can be reduced to the indistinguishable level under various electrodes’ sizes, if the height of the insulation layer is proper. For contrast ratio, it is larger than 200:1 at full viewing-angle, and the zone of 500:1 covers 60° polar angle.     

Synthesis, structures, and electrophysical properties of single crystals of solid solutions CdGeAs2:Mn(x) and Cd0.964Zn0.036GeAs2:Mn(x)

Single crystals of the solid solutions CdGeAs₂:Mn(x) and Cd_0.964Zn_0.036GeAs₂:Mn(x) have been grown by the vertical Bridgman method. An X-ray diffraction study has demonstrated that Cd_0.964Zn_0.036GeAs₂ (I), Cd_0.964Zn_0.036GeAs₂:Mn (1.5 wt%) (II), and Cd_0.964Zn_0.036GeAs₂:Mn (2.18 wt %) (III) retain the CdGeAs₂ structure (tetragonal system, space group I 2d). The unit cell parameters of the solid solutions are as follows: a = b = 5.934(1) ?, c = 11.219(2) ? for I; a = b = 5.919(1) ?, c = 11.204(2) ? for II; and a = b = 5.918(1) ?, c = 11.208(2) ? for III. Many of Mn atoms in II and III occupy interstitial sites in the crystal lattice. Selected electrical and magnetic properties of single crystals of CdGeAs₂:Mn(x) are discussed. Original Russian Text ? S.G. Mikhailov, K.K. Palkina, A.V. Molchanov, S.F. Marenkin, T.V. Filippova, L.I. Ochertyanova, I.S. Zakharov, A.V. Kochura, R. Laiho, E. Lahderanta, A. Lashkul, M.A. Shakhov, 2007, published in Zhurnal Neorganicheskoi Khimii, 2007, Vol. 52, No. 11, pp. 1879–1885.     

Low-gamma shift asymmetrical double-side blue-phase liquid crystal display

ABSTRACT

A single-domain blue-phase liquid crystal display (BPLCD), which has asymmetrical double-side electrode structure, is proposed to reduce gamma shift. Firstly, the electro-optical curve and gamma shift of the proposed BPLCD are discussed under the comparison with conventional in-plane switching (IPS) BPLCD. And then, its gamma shift is investigated under various conditions. Compared with the conventional IPS-BPLCD, the operating voltage can be reduced by ~31%, and the transmittance is increased by ~6%. The indistinguishable gamma shift can be obtained under various electrodes’ sizes, when the cell gap is appropriate. The results also indicate that if the electrodes’ height and Kerr constant of BPLC increase, the operating voltage can be further reduced (only 9.6 V in this work), and the gamma shift almost do not change. Moreover, a certain misalignment between the top and bottom glasses are permitted, which is good for reducing the fabrication difficulty. In terms of viewing angle, the proposed BPLCD has an average contrast ratio of ~5000:1, and the gamma shifts at full viewing angles are all indistinguishable.     

A Rapid,Simple, and Sensitive Spectrophotometric Determination of Traces of Vanadium (V) in Foodstuffs,Alloy Steels,and Pharmaceutical,Water, Soil,and Urine Samples

Abstract

A rapid, simple, sensitive, and selective spectrophotometric method is investigated for the determination of traces of vanadium (V) in foodstuffs, alloy steels, and pharmaceutical, water, soil, and urine samples in aqueous DMF medium. The metal ion forms a green colored complex with 2-hydroxy-3-methoxy benzaldehyde thiosemicarbazone (HMBATSC) in an acidic buffer of pH 6.0. The green colored solution, having an absorbance maximum at 380 nm, is stable for more than 72 hours. Beer's law is obeyed in the range of 0.051–2.037 µg ml^?1. The molar absorptivity and Sandell's sensitivity of the method are found as 2.75 × 10⁴ l mol^?1 cm^?1 and 0.0018 µg cm^?2, respectively. The green colored complex has 1:2 [V(V)-HMBATSC] stoichiometry. The stability constant of the complex is determined as 3.267 × 10¹¹ by Job's method. The optimum reaction conditions and other analytical parameters are studied. A sensitive and selective second-order derivative spectrophotometry has also been proposed for the determination of V(V). The interference of various cations and anions are studied. The present method is successfully applied to the determination of vanadium (V) in foodstuffs, alloy steels, and pharmaceutical, water, soil, and urine samples.     

Determination of Pentachlorophenol (PCP) in Samples of the Environmental Specimen Bank Using Isotope Dilution

Abstract

Within the program of the Environmental Specimen Bank a quick and efficient method for determination of pentachlorophenol (PCP) in various environmental matrices has been developed. The method includes alkaline hydrolysis of bound PCP, acidification, simultaneous steam distillation and extraction in one glass apparatus. After clean-up and derivatization with acetic anhydride the samples were analyzed by gas chromatography/mass spectrometry. Concentrations were calculated using ¹³C-labeled PCP as the internal standard. Validation was carried out with various environmental samples (soil, fish, conifer needles, kale).

The method can be used for various biological samples without any modification. The extracts are free of matrix components (lipids, chloropyll, terpenes, etc.) and other contaminants, which results in clear chromatograms with few peaks; therefore, correct integration is facilitated. Although the recoveries of PCP are in the range of 50–90%, due to losses during the several method steps, these losses can be corrected with the ¹³C-labeled internal standard, resulting in high precision (1.5–2.2% standard deviation).     

Lithium electrochromism of atmospheric pressure plasma jet-synthesized NiO x C y thin films

Reversible lithium intercalation and deintercalation behavior of atmospheric pressure plasma jet (APPJ)-synthesized organonickel oxide (NiO _x C _y ) thin films under various substrate distances is testified in an electrolyte (1?M LiClO₄–propylene carbonate solution) at low driving voltages from ?0.5 to 1.5?V. Fast responses of 2?s bleaching at ?0.5?V and 6?s coloration at +1.5?V are accomplished for the nano-porous NiO _x C _y thin films. This study reveals that a rapid synthesis of electrochromic NiO _x C _y thin films in a single process via APPJ by 21?s is investigated. This study presents a noteworthy electrochromic performance in a light modulation with up to 43% of transmittance variation and a coloration efficiency of 36.3?cm²/C at a wavelength of 830?nm after 200?cycles of cyclic voltammetry measurements.     

Some Arylidene-2-Pyridylhydrazone Derivatives as Reagents for Spectrophotometric Determination of Palladium (II)

Abstract

A method for spectrophotometric determination of palladium by complexation with Arylidene-2-pyridylhydrazone derivatives in 50% (V/V) ethanolic solution are described-Pd(II) forms a 1:1 complex with the reagents. Beer's law is obeyed over the range 0.2-6.5 μg ml^?1. The effect of pH, effect of excess reagent, stability of complexes as well as the tolerance amount of many metal ions have been reported. The method is applied, with fair accuracy, to the determination of pd(II) in synthetic solutions.     

XAD-2 HPTLC Method of Identification and Determination of Some Synthetic Food Colourings

Abstract

An HPTLC method for identification and determination of 12 synthetic dyes (Amaranth, Allura red, Brilliant black BN, Brilliant blue E, Carmoisine, Erythrosine, Indigotine, Patent blue V, Ponceau 4R, Quinoline yellow, Sunset yellow, Tartazine) has been developed. Amberlite XAD-2 was used as a stationary phase for column chromatography. Elution was performed with various acidified alcohols (i-propanol, n-propanol, n-butanol) and recoveries between 81.5 - 100.2% were obtained. The low limit of detection is in the range of 4 – 10 ng. The method was tested on commercial products as: carbonated soda, candies, chewing gum, identical natural flavours, etc.     

Synthesis and photovoltaic properties of polymeric metal complexes containing 8-hydroxyquinoline as dye sensitizers for dye-sensitized solar cells

Four new donor–acceptor type polymeric metal complexes (P1, P2, P3, and P4) with the same Cd(II) complex in side chain and different conjugated backbone structures were synthesized by Yamamoto coupling and applied in dye-sensitized solar cells (DSSCs) as photosensitizers. The photophysical, electrochemical, and thermal properties were investigated in detail, showing that conjugated backbone containing fluorene improved intramolecular charge transfer and increased generation of photocurrent. The highest power conversion efficiency of 0.56% (J _sc?=?1.63?mA?cm^?2, V _oc?=?0.69?V, FF?=?0.50) was obtained with a DSSC based on P3 under simulated air mass 1.5 G solar irradiation, which shows a new strategy to design photosensitizers for DSSCs.     

Reactive groups on polymer-covered electrodes

Polythiophene films containing ester groups on the surface of electrodes are interesting potential carrier materials for reagents. Methyl thiophene-3-acetate (3) can be copolymerized with 3-methylthiophene (1) and 3-butylthiophene (2) by means of cyclic voltammetry (CV) at potentials of 0–2.2 V. Higher potentials (0–2.4 V) lead to overoxidation of the copolymers. The ester groups were confirmed by FTIR spectra. Electrochemical investigations of 2,2′-bithiophene (6) and 3 at equimolar ratios showed no successful copolymerization at potentials of 0–1.3 V. If the copolymerization experiments of 6 with 1 or 3 were carried out at molar ratios of 1:50 at 1.3 V, 6 with its low oxidation potential was polymerized without copolymerization of the other monomers. However, if the oxidation potential was increased stepwise from 1.3 V, the oxidation of 1 or 3 occurred, forming copolymers containing both monomer components. HPLC investigations of solutions containing mixtures of 6 and 3 and also 6 and 1 in acetonitrile/TEABF₄ showed, after exhaustive oxidation at a potential of 1.3 V, the complete absence of 6; 1 and the ester 3 were not oxidized and copolymerized at these potentials. From the results of the copolymerization experiments, as well as the HPLC investigations, it can be concluded that the dominant mechanism of the electrochemical polymerization is radical cation dimerization. Received: 21 August 1998 / Accepted: 11 January 2000     

Sensitive Spectrophotometric Determination of Vanadium in Environmental Samples at PPB Levels

Abstract

A new, sensitive and selective method for separation, and extraction - spectrophotometric determination of V (V) with pyrogallol {Ar (OH)₃} and hydroxyamidines (HOA) is described. The molar absorptivities of the colored species with six substituted HOA lie in the range of (0.52–1.5)x 10⁶ L mole^?1 cm^?1 at λ_max 430–440 nm. Of these, the simplest compound, N-hydroxy-N, N- diphenylbenz-amidine (HDPBA) gives the most sensitive color reaction and hence, it is used for detailed studies. No interference of almost all diverse ions tested is noticed. The method offers the determination of vanadium in different environmental samples.     

The Separation and Determination of Molybdenum by Electron Paramagnetic Resonance

Abstract

A procedure is described for the separation and quantitative determination of molybdenum by means of EPR. Molybdenum(VI) was precipitated from a hydrochloric acid solution (1.5 Molar) with α-benzoinoxime. The precipitate was separated by centrifugation and then the sample was dried in an oven at 105°C. Nitrogen was passed over the sample to complete the drying procedure. The precipitate was dissolved in acetonitrile which was 0.5 M in lithium perchlorate. Electrochemical reduction of the sample produced the molybdenum(V) species. The concentration of molybdenum(V) was determined directly from the intensity of the first derivative EPR signal. The range of linearity of the analytical curve was 1.00 × 10^?2 M to 1.00 × 10^?4 M, and a routine accuracy of less than 6% was obtained.     

Voltammetric Determination of L‐Dopa Using a Carbon Nanotubes‐Nafion Modified Glassy Carbon Electrode

Abstract

A method for determination of L‐dopa by the adsorption stripping voltammetry (ASV) using a multiwalled carbon nanotubes (MWNTs)–Nafion modified glassy carbon electrode (GMGCE) was proposed. This chemically modified electrode (CME) shows a better stability. A sensitive oxidation peak was observed and the anodic peak potential is ca. 0.374V (vs. SCE). The influences of various experimental parameters on the current peak were completely studied. Under the optimized condition, the method has been applied to the determination of L‐dopa in samples. There is a good linear relationship between the peak current (i_p) and L‐dopa concentration in the range of 3.5×10^?7～1.5×10^?5 mol/L, with the limit of detection 5.0×10^?8 mol/L.