A Validated Voltammetric Procedure for Quantification of the Antifungal Drug Griseofulvin in Bulk Form,Tablets, and Biological Fluids at a Mercury Electrode

Abstract

Griseofulvin is an antifungal antibiotic used to treat various pathogenic mycotic diseases. The voltammetric behavior of griseofulvin at a hanging mercury drop electrode in Britton‐Robinson buffers of pH 2–11.5 was studied and discussed. A fully validated sensitive square‐wave adsorptive cathodic stripping voltammetric procedure was described for direct determination of bulk griseofulvin substance. The procedure was based on the reduction of the >C?O double bond of griseofulvin molecule following its preconcentration onto a hanging mercury drop electrode in a Britton‐Robinson buffer of pH 10. Limits of detection (LOD) and quantitation (LOQ) of 5.8×10^?10 M and 1.93×10^?9 M bulk griseofulvin were achieved, respectively. The proposed stripping voltammetric procedure was successfully applied to assay griseofulvin in tablets and in spiked human serum and urine samples. LOD of 8.65×10^?10 M and 6.6×10^?9 M and LOQ of 2.88×10^?9 M and 2.2×10^?8 M griseofulvin in spiked human serum and urine samples, respectively, were achieved.     

Adsorptive stripping voltammetric determination of midazolam as a method for quality control

Controlled interfacial accumulation of the benzodiazepine midazolam at a hanging mercury drop electrode provides the basis for a highly sensitive and accurate adsorptive stripping voltammetric procedure. The response was linear in the range 1.9 × 10^?6? × 10^?9 M when using a 120-s preconcentration at ?0.45 V vs. Ag/AgCl in Britton-Robinson buffer of pH 5.00. In this range the relative standard deviation was between 1.21 and 1.62%. The applicability of the method to pharmaceutical preparations is discussed.     

Electrochemical Behavior and Determination of Nicardipine

Abstract

The voltammetric behavior and measurement of nicardipine at the glassy carbon, carbon paste and hanging mercury drop electrodes are discussed. Cyclic voltammetry is used to elucidate the redox mechanism. Nicardipine is shown to adsorb on carbon electrodes, with the surface species retaining its electroactive characteristics. The adsorptive accumulation serves as a preconcentration step which improves the voltammetric measurement with respect to selectivity and sensitivity. Coupling this with a medium-exchange step eliminates interferences due to solution-phase electroactive species and permits direct measurement in urine. The inherent sensitivity of differential pulse voltammetry at the mercury electrode permits convenient measurement at the submicromolar level, with detection limit of 2 × 10^?8M. Amperometric detection for a flow injection system is illustrated.     

Sequential extraction partitioning of metals,sulfur, and phosphorus in bottom ash from a coal-fired power plant

Abstract

The herbicide trifluralin was analysed by adsorptive stripping voltammetry on a glassy carbon electrode. The linear concentration range was 2.5 × 10^?7 M – 1.25 × 10^?6M when using 5-min preconcentration at open circuit conditions in Britton-Robinson buffer of pH 7.0. The detection limit of trifluralin was 2.5 × 10^?8M. The relative standard deviation was 3.3% at a concentration of 1.0 × 10^?6M (n=5). The method was applied to the determination of trifluralin in soil with good recovery.     

Determination of Ultra Trace Amounts of Uranium (VI) by Adsorptive Stripping Voltammetry Using L-3-(3, 4-dihydroxy phenyl) Alanine as a Selective Complexing Agent

Abstract

The spectrophotometric behavior of uranium (VI) with L-3-(3, 4-dihydroxy phenyl) alanine (LDOPA) reagent revealed that the uranium can form a ML₂ complex with LDOPA in solution. Thus a highly sensitive adsorptive stripping voltammetric protocol for measuring of trace uranium, in which the preconcentration was achieved by adsorption of the uranium-LDOPA complex at hanging mercury drop electrode (HMDE), is described. Optimal conditions were found to be a 0.02 M ammonium buffer (pH 9.5) containing 2.0 × 10^?5 M (LDOPA), an accumulation potential of ? 0.1 V (versus Ag/AgCl) and an accumulation time of 120 sec.

The peak current and concentration of uranium accorded with linear relationship in the range of 0.5–300 ng ml^?1. The relative standard deviation (at 10 ng ml^?1) is 3.6% and the detection limit is 0.27 ng ml^?1. The interference of some common ions was studied. Applicability to different real samples is illustrated. The attractive behavior of this reagent holds great promise for routine environmental and industrial monitoring of uranium.     

Adsorptive stripping voltammetry of sex hormones at the static mercury drop electrode

Controlled adsorptive accumulation of testosterone, methyltestosterone and progesterone on the static mercury drop electrode provides the basis for direct stripping measurement of these compounds ar nanomolar concentrations. The adsorptive stripping behavior is evaluated with respect to preconcentration time and potential, stripping mode, concentration dependence, drop size and other variables. With 5-min accumulation, peak current enhancements of 45, 18 anal 12 are observed for 5 × 10^?8 M testosterone, progesterone and methyltestosterone, respectively, relative to direct pulse voltammetry. Detection limits are 1.6 × 10^?10 M for testosterone, 2 × 10^?10 M for progesterone and 3.3 × 10^?10 M for methyltestosterone with 15-min preconcentration. The relative standard deviation for 8 × 10^?8 M progesterone is 3.4% (n=8). Applicability to direct measurements of methyltestosterone in pharmaceutical formulations is assessed.     

Determination of folic acid by adsorptive stripping voltammetry at the static mercury drop electrode

Folic acid can be determined at nanomolar concentrations by controlled adsorptive accumulation of folic acid on a static mercury drop electrode held at ?0.3 V vs. Ag/AgCl followed by reduction of the surface species. In 0.1 M sulfuric acid, a cathodic scan gives peaks at ?0.47 v and ?0.75 V vs. Ag/Agcl; the latter peak provides greater sensitivity. Differential-pulse stripping is shown to be superior to normal-pulse and d.c. stripping. After a 5-min preconcentration, the detection limit is about 1 × 10^?10 M folic acid. The adsorptive stripping response is evaluated with respect to concentration dependence, preconcentration time and potential, solution acidity and the presence of gelatin and bromide. The relative standard deviation at the 5 × 10^?8 M level is 1.2%. This method is applied to the determination of folic acid in pharmaceutical tablets.     

Voltammetric determination of methidathion insecticide

An electroanalytical method has been developed for the determination of methidathion by squarewave voltammetry on a Nafion®-coated glassy carbon electrode in aqueous solutions with 0.05 M acetate buffer as a supporting electrolyte. The best voltammetric conditions were found to be pH 4.0, a preconcentration potential of 0.45 V, and a preconcentration time of 60 s. The experimental parameters, such as pH, film thickness, preconcentration potential, preconcentration time, and square-wave voltammetric parameters, were optimized. Using this method, the calibration curve is linear in the range 5 × 10^?8?7 × 10^?7 M with a detection limit (S/N = 3) of 30 nM.     

Adsorptive Stripping Square-Wave Voltammetry of Creatine

ABSTRACT

An adsorptive stripping square-wave voltammetric method for quantitative determination of creatine is developed. The basic redox properties of creatine are investigated by means of square-wave and cyclic staircase voltammetry. Creatine undergoes an irreversible reduction in neutral and acidic medium at a hanging mercury drop electrode. The square-wave voltammetric response of creatine depends on the parameters of the SW excitation signal as well as on the concentration and type of the supporting electrolyte, the accumulation time and the potential and pH of the medium. The optimal experimental conditions for quantitative determination of creatine are as follows: supporting electrolyte 0.1 mol/L KNO₃ buffered with 0.1 mol/L acetate buffer to pH = 4 and accumulation potential -1.2 V. The optimal SW parameters found are: frequency f = 120 Hz, amplitude E _sw = 30 mV, and scan increment dE = 4 mV. A detection limit of 6.6 x 10^?8 mol/L creatine was obtained after 30 s preconcentration period at accumulation potential -1.2 V. The correlation coefficients of the calibration curves at concentration levels of 10^?7 to 10^?5 mol/L creatine are greater than 0.99. The results of recovery tests range from 92.18% to 102.51%.     

Use of adsorptive square-wave anodic stripping voltammetry at carbon paste electrode for the determination of amlodipine besylate in pharmaceutical preparations

The antihypertensive drug amlodipine has been characterized voltammetrically in a carbon paste electrode by means of anodic stripping voltammetry. An adsorptive stripping method in a carbon paste electrode for trace determination of amlodipine has been described. Cyclic voltammetric studies indicated the oxidation of amlodipine besylate at the electrode surface through a single two-electron irreversible step fundamentally controlled by adsorption. A study of the variation in the peak current with solution variables such as pH, ionic strength, concentration of amlodipine, possible interference, and instrumental variables, such as preconcentration time and accumulation potential, has resulted in the optimization of the oxidation signal for analytical purposes. By anodic adsorptive anodic stripping voltammetry, the calibration plot was linear in the range 9.9 × 10^?9 ? 1.4 × 10^?7 M with a detection limit of 2 × 10^?10 M in a carbon paste electrode at pH 11.0. The procedure was successfully applied to the assay of amlodipine besylate in some commercial products in the market (Amlopres®, Amlodipine, and Norvasc®). The percentage recoveries were in agreement with those obtained by the reference method.     

Voltammetric determination of N-alkylated anilines by adsorption/extraction at a carbon-paste electrode

The voltammetric behaviour of aniline and some of its N-alkylated derivatives at a carbon-paste (Nujol/graphite) electrode is examined. The N-alkylated anilines, in contrast to aniline, are accumulated at the electrode by a combined adsorption/extraction process. The organic bases are determined in the rane 10^?7?2×10^?6 M after a 2-min preconcentration period by differential pulse voltammetry; N,N-dimethylaniline can be determined in the presence of excess of aniline (10^?5 M) by using medium-exchange. The voltammetric method is used for evaluation of the distribution ratios of the organic bases in the Nujol/aqueous buffer system. The enhancement of the voltammetric signal of each base is correlated with the respective distribution ratio.     

Trace measurements of colchicine by adsorptive stripping voltammetry

A highly sensitive voltammetric method for trace measurements of the alkaloid colchicine is described. The method is based on the controlled adsorptive accumulation of the drug at the hanging mercury drop electrode, followed by voltammetric determination of the surface species. The adsorptive stripping response is evaluated with respect to preconcentration time and potential, solution pH, voltammetric waveform and other variables. With a 10-min preconcentration, a detection limit of 1.3 x 10(-10)M is obtained. The relative standard deviation (at the 1 x 10(-7)M level) is 1.1%. Applicability to urine analysis is illustrated.     

Catalytic Adsorptive Stripping Voltammetric Procedure for Determination of Total Chromium in Environmental Materials

A sensitive catalytic adsorptive stripping voltammetric procedure for determination of traces of total chromium in environmental samples is reported. The method is based on the preconcentration of a Cr(III)? H₂DTPA complex by adsorption at the HMDE from an acetate buffer solution at the potential ?1.0 V vs. Ag/AgCl. Total chromium was determined as Cr(III) after reduction of Cr(VI) to Cr(III) by NaHSO₃. In order to stabilize the signal of Cr(III) the measurements were performed at 5 °C. The calibration graph for chromium for an accumulation time of 60 s was linear in the range from 5×10^?10 to 5×10^?8 mol L^?1. The relative standard deviation for a chromium concentration of 1×10^?8 mol L^?1 was 3.9% (n=5). The detection limit for accumulation time of 60 s was about 8×10^?11 mol L^?1. The validation of the procedure was performed by the analysis of the certified reference materials.     

Simultaneous Determination of Antimony and Lead in Gunshot Residue by Cathodic Adsorptive Stripping Voltammetric Methods

Differential pulse cathodic adsorptive stripping (DPCAdSV) and square wave cathodic adsorptive stripping (SWCAdSV) voltammetric methods were developed for the determination of antimony and lead in gunshot residues. Linear working ranges for DPCAdSV and SWCAdSV methods were (2.0×10^?9–5.0×10^?7) M and (2.0×10^?9–7.0×10^?7) M for antimony and 2.0×10^?9–3.0×10^?7 M (both methods) for lead. The detection of antimony limits were found to be 1.3×10^?9 M for DPCAdSV and 7.3×10^?10 M for SWCAdSV while the corresponding values for lead were 3.0×10^?9 M and 5.8×10^?10 M. Antimony and lead contents obtained by these methods in gunshot residues are in good agreement with those obtained by graphite furnace atomic absorption spectrometric method within a confidence limit of 95%.     

Square wave Stripping voltammetry of Cobalt Based on Adsorptive accumulation of its Hydroxynaphthol Blue (HNB) Complex at the Static Mercury Drop Electrode

ABSTRACT

A new method is described for the determination of cobalt based on the square wave adsorptive stripping voltammetry of Co(II) complexed with hydroxynaphthol blue (HNB) at the static mercury drop electrode. Optimal conditions were found to be: preconcentration potential, -0.500V vs. Ag/AgCl (KCl 3M); preconcentration time, 30 s (with stirring); pulse height, 50 mV; frequency, 100 Hz; scan increment, 4 mV; step time, 0.010 s; supporting electrolyte, HEPES/HCl (0.1 M, pH 7.0-8.0) or triethanolamine/HCl (0.1 M, pH 7.6); concentration of hydroxynaphthol blue, 5.0 × 10^?6 M. The response of the system was found to be linear in a range of Co(II) concentrations from 2.0 to 10.0 μg/L. The limit of detection was found to be 1.8 × 10^?9 M with 2 minutes of preconcentration time. The effect of various potential interferences were also studied including a variety of cations, anions and organic surfactants. The interferences by Ni(II), and Cr(VI) may be eliminated by addition of EDTA or CDTA and the of Fe(III) and Ti(IV) by fluoride. The merits of the procedure were demonstrated in the analysis of certified and biological samples.     

Glassy carbon electrodes coated with cellulose acetate for adsorptive stripping voltammetry

The utility of glassy carbon electrodes coated with cellulose acetate for adsorptive stripping voltammetry of oxidizable organic compounds is evaluated. This surface modification alleviates the co-adsorption problem commonly encountered at conventional electrodes. Interferences from electro-inactive surfactants and, in certain situations, from adsorbable electroactive substances, are minimized. Quantitation of the drugs, chlorpromazine and trimipramine, is not affected by the presence of up to 120 mg 1^?1 albumin or gelatin. The chlorpromazine response is not affected by the bilirubin or perphenazine peaks which overlap at uncoated electrodes. The adsorptive stripping response at the coated electrode is evaluated with respect to hydrolysis time, preconcentration time, concentration dependence, reproducibility, and other variables. The detection limit for chlorpromazine is 1.3 × 10^?8 M (5-min preconcentration). Applicability to assays of urine and serum samples is illustrated.     

Voltammetric sensing of triclosan in the presence of cetyltrimethylammonium bromide using a cathodically pretreated boron-doped diamond electrode

ABSTRACT

In the present study, a simple, cheap and sensitive electrochemical method based on a cathodically pretreated boron-doped diamond (CPT-BDD) electrode is described for the detection of triclosan with the cationic surfactant (cetyltrimethylammonium bromide, CTAB) media. The oxidation of triclosan was irreversible and exhibited an adsorption controlled process. The sensitivity of the adsorptive stripping voltammetric measurements was significantly improved with addition of CTAB. Using square-wave stripping mode, a linear response was obtained for triclosan determination in Britton-Robinson buffer solution at pH 9.0 containing 2.5 × 10^?4 M CTAB at around + 0.67 V (vs. Ag/AgCl) (after 30 s accumulation at open-circuit condition). The method could be used in the range of 0.01–1.0 μg mL^?1 (3.5 × 10^?8–3.5 × 10^?6 M), with a detection limit of 0.0023 μg mL^?1 (7.9 × 10^?9 M). The feasibility of the proposed method for the determination of triclosan in water samples was checked in spiked tap water.     

Adsorptive Cathodic Stripping Voltammetry Determination of Ultra Trace of Lead in Different Real Samples

Abstract

In the present work, an adsorptive cathodic stripping voltammetric method using a hanging mercury drop electrode (HMDE) was described in order to determine the ultra trace of lead ions with carbidopa in different real samples. The method is based on accumulation of lead metal ion on mercury electrode using carbidopa as a suitable complexing agent. The potential was scanned to the negative direction and the differential pulse stripping voltammograms were recorded. The instrumental and chemical parameters were optimized. The optimized conditions were obtained in pH of 8.4, carbidopa amount of 1.0×10^?6 M, accumulation potential of 0. 0 V, accumulation time of 100 s, scan rate of 100 mV/s and pulse height of 50 mV. The relationship between the peak current versus concentration was linear over the range of 2.4×10^?10–4.8×10^?7 M. The limits of detection were 5.8×10^?11 M and the relative standard deviation at 4.8×10^?10, 2.1×10^?8, and 2.4×10^?7 M of lead ion were obtained 3.2, 2.9, and 2.7%, respectively (n=7).     

Carbon Paste Electrode Plated with Lead Film. Voltammetric Characteristics and Application in Adsorptive Stripping Voltammetry

A lead film plated in situ at a carbon paste support was tested as a novel, potential electrode for adsorptive stripping voltammetric determination of cobalt traces in an ammonia buffer solution. To show the practical applicability of the new electrode, a catalytic adsorptive Co system in a supporting electrolyte containing 0.1 M ammonia buffer, 5×10^?4 M nioxime and 0.25 M nitrite was selected and investigated as a model solution. Pb and Co ions were simultaneously accumulated in situ on the electrode surface: Pb ions electrochemically at ?1.3 V) and then at ?0.75 V, at which potential the Co(II)‐nioximate complex was also pre‐concentrated via adsorption. Instrumental parameters, such as the time of nucleation and formation of Pb film deposits, the time of accumulation of the Co‐nioxime complex at the PbF/CPE, and the procedures of electrode regeneration, were optimized to obtain good reproducibility and sensitivity of the Co response. The optimized procedure yields favorable and highly stable stripping responses with good precision (RSD=3% for a 5×10^?8 M Co) and good linearity (up to 5×10^?7 M, coefficient of determination, R=0.996). The detection limit was 4×10^?10 M Co (0.023 μg L^?1) for an accumulation time of 120 s. The method enables the determination of Co in the presence of high excesses of Ni or Zn. The voltammetric data were correlated with the structural characterization by scanning electron microscopy (SEM) and X‐ray fluorescence spectroscopy (XRF).     

Voltammetric analysis of Pb(II) in natural waters using a carbon paste electrode modified with 5-mercapto-1-methyltetrazol grafted on hexagonal mesoporous silica

A hexagonal mesoporous silica (HMS) functionalized with a 5-mercapto-1-methyltetrazole derivative was employed to prepare a chemically modified carbon paste electrode for Pb(II) detection in aqueous solution by square wave adsorptive stripping voltammetry. The optimal operating conditions were 5 min preconcentration time at pH 6.5, and 120 s electrolysis time in 0.2 mol L^?1 HCl. Under these conditions, the voltammetric signal increased linearly with the preconcentration time in the range 1 to 10 min and with the Pb(II) concentration in the range 1 to 100?µg L^?1. The electrode was reproducible and sensitive. Simultaneous determination of Pb, Cd and Cu was also carried out with the electrode. The accuracy of the method was validated by analysing Pb(II) in tap water and groundwater samples.