Solvent extraction of alkaline earth metals,and lithium with 1-phenyl-3-methyl-4-acylpyrazol-5-ones and trioctylphosphine oxide

The synergic extraction of magnesium, calcium, strongium, barium and lithium into cyclohexane or benzene containing 1-phenyl-3-methyl-4-acyl-pyrazol-5-one (HA) and tri-n-octylphosphine oxide (TOPO) was investigated as a function of pH, HA and TOPO concentration. The extracted species when the 4-benzoyl compound was used, were MA₂(TOPO)₂ (M = Mg, Ca, Sr), BaA₂(TOPO)₃ and LiA(TOPO)₂. When the 4-trifluoro-acetyl derivatives was used, the extracted species were the same except for SrA₂(TOPO)₃. Extraction constants for the synergic extractions were calculated.     

Synergistic extraction of alkaline earth cations with 3-phenyl-4-benzoyl-isoxazol-5-one and tri-n-octylphosphine oxide in toluene

The synergistic extraction of alkaline earth cations from 1M NaNO₃ aqueous solutions with 3-phenyl-4-benzoylisoxazol-5-one (HPBI) and tri-n-octylphosphine oxide (TOPO) in toluene at 25°C has been studied. The extraction efficiency follows the order Ba²⁺<Sr²⁺<Ca²⁺<Mg²⁺, which is the same as that previously observed with 1-phenyl-3-methyl-4-benzoyl-pyrazol-5-one (HPMBP). The extraction occurs at a lower pH range than with HPMBP because of the higher acidity of HPBI. The extracted species are M(PBI)₂(TOPO) _x withx=2 for M=Mg, Ca, Sr and Ba (logK _1,2,2=3.91, 1.18 and 0.29 respectively) and withx=3 for M=Sr and Ba (logK _1,2,3=3.28 and 2.07 respectively). The strong interactions which occur between HPBI and TOPO (logK _int=1.84) have been considered in the extraction constant calculations..     

Polymerization by alkaline earth metal compounds—II Polymerization of 2- and 4-vinylpyridine,styrene and butadiene by triphenylmethyl derivatives of calcium,strontium and barium

Investigations are reported on polymerizations of 2- and 4- vinylpyridine, styrene and butadiene by a series of related alkaline earth metal initiators, Ph₃CMX(THF)_n (M = Ca, Ba, X = Cl, n = 2; M = Ca, X = Br, n = 4; M = Sr, X = Cl, n = 4; M = Sr, X = Br, n = 5) in tetrahydrofuran (THF) or 1,2-dimethoxyethane (DME) at various temperatures and in the absence of solvent. The polymers have been examined by GPC and aspects of their microstructures determined by ¹³C and/or ¹H NMR spectroscopy and, for polybutadiene, i.r. spectroscopy. Poly-2-vinylpyridine produced by Ph₃CMX(THF)_n is rich in isotactic content; the isotacticity is higher for polymer formed in THF than DME solution, falls with change of initiator in the order M = Ca > Sr > Ba and, in DME, is greater when X = Br. The tacticities of poly-4-vinylpyridine and polystyrene are similar to those obtained from related organometallic initiators. The 1,4-content of polybutadiene decreases with initiator Ph₃CMX(THF)_n in the order M = Ba > Sr > Ca; the trans-1,4 structure generally predominates except when M = Ba from which cis-1,4 links are formed in comparable amounts.     

M5(PO4)3F (M=Ca, Sr, Ba)中Sm3+的电荷迁移态及Sm3+和Eu3+的电荷迁移能量关系

采用高温固相反应合成了M_5-2xSm_xNa_x(PO₄)₃F(M=Ca,Sr,Ba)荧光体,研究了其在真空紫外-可见光范围的发光特性。发现在Ca₅(PO₄)₃F中Sm³⁺的电荷迁移带约在191 nm,在Sr₅(PO₄)₃F中约在199 nm,而在Ba₅(PO₄)₃F中约在204 nm,随着被取代碱土离子半径的增大电荷迁移能量逐渐减小。比较了M₅(PO₄)₃F (M=Ca,Sr,Ba)中Sm³⁺和Eu³⁺电荷迁移能量的关系。     

The extraction of uranium(VI), americium and europium by LIX 64 and by a mixture of LIX 64 and tri-n-octylphosphine oxide

The extraction of U(VI), Eu and Am by the aromatic main component (HA) of LIX 64N dissolved in toluene was studied at pH 3–9. The values of pH_1/2 for the extraction with 0.146 M HA are 4.0, 5.5 and 5.2, and the pH's of maximum extraction are 6.0, 6.8, and 7.0 for U(VI), Eu and Am, respectively. The stoichiometry of the extracted chelates determined by the slope analysis is UO₂A₂ and MA_3–nY_n (n=1,2) for Eu and Am, the ligand Y being probably the nitrate anion. The addition of tri-n-octylphosphine oxide (TOPO) enhances the extraction of U(VI) and especially of Eu at pH<6. An Eu chelate species solvated by 2 TOPO molecules is extracted at pH 4 by the mixture of HA+TOPO, whereas the species extracted at pH 6.5 is not solvated by TOPO.     

The extraction behavior of some dicarbollylcobaltate crown extraction systems

The extraction of cesium, strontium and barium by a nitrobenzene solution of dicarbollylcobaltate in the presence of various crown ethers has been investigated and the influence of the substituent of crown to the extraction possibility has been observed. It has been found, that the addition of DB15C5, DB18C6 and DB21C7 (but not DB24C8 and DCH24C8) increases the distribution ratio of Cs by one order of magnitude. The fivemembered crowns are usually more efficient extractants for strontium than DCH18C6, which is widely used for strontium separation. The distribution ratio of strontium D_Sr decreases in the order 15-crown-5>benzo-15-crown-5>2-hydroxymethyl-15-crown-5>cyclohexyl-15-crown-5 >dibenzo-15-crown-5> nitrobenzo-15-crown-5. The selectivity α(Sr/Ca) decreases in the order 15C5>B15C5>DB15C5>2HM15C5>CH15C5. A selectivity factor α(Sr/Ca)≥1000 can be reached in the presence of 15C5 and B15C5. Six-membered and four-membered crowns extract strontium worse than most of the five-membered crowns. The selectivity factors α(Sr/Ca)≈100 have been reached for six-membered crowns and α(Sr/Ca)<1 has been found for 12C4. The extraction of barium by a nitrobenzene solution of dicarbollylcobaltate in the presence of 15C5 is even more efficient as the extraction of strontium. In that system D_Sr>10⁴ and D_Ba>10⁴ have been found for the extraction of Sr and Ba by a 0.01M nitrobenzene solution of dicarbollylcobaltate (c_B=0.01 mol/l) from 0.1M HNO₃. Maximal values of separation factor α(Ba/Sr) have been found in the system containing DB21C7.     

Complexes of alkaline-earth metal β-diketonates with 15-crown-5: Synthesis, structures, and properties

The alkaline-earth metal complexes [M(Pta)₂(15C5)] (M = Ca, Sr, and Ba; Pta is the 1,1,1-trifluoro-5,5-dimethylhexane-2,4-dionate anion; 15C5 is 15-crown-5) were obtained from PtaH and 15C5 in toluene. The complexes were characterized by IR and ¹H NMR spectra and TGA data. The structures of [Ca(Pta)₂(15C5)] and [Ba(Pta)₂(15C5)] were confirmed by X-ray diffraction analysis. The volatility and thermal stability decrease in the order [Ca(Pta)₂(15C5)] > [Sr(Pta)₂(15C5)] > [Ba(Pta)₂(15C5)].     

Solution synthesis of calcium,strontium and barium metallocenes

Bis(cyclopentadienyl)metal complexes of calcium, strontium and barium can be prepared in synthetically useful yields (> 65%) from the reaction of lithium or potassium cyclopentadienides and the appropriate metal dihalides in THF. The THF-soluble complexes (C₅H₅)₂Ca(THF)₂ and (Me₅C₅)₂M(THF)₂ (M = Ca, Sr, Ba) are extracted from the reaction of the appropriate potassium cyclopentadienide with a metal halide; the THFinsoluble (C₅H₅)₂M(THF)_x(x ≈ 1 for Sr; x ≈ 0.25 for Ba) remain after the reaction of a lithium cyclopentadienide and the metal iodide.     

The Recently Synthesized Dimagnesiabutadiene and the Analogous Dimetalla‐Beryllium, ‐Calcium, ‐Strontium,and ‐Barium Compounds

The 2014 synthesis of the remarkable dimagnesium compound Mg₂[C₄(CH₃)₂(Si(CH₃)₃)₂](C₃H₇)₂(C₄H₈O)₂ may point the way to a new chapter in alkaline earth organometallic chemistry. Accordingly, we have studied the known Mg compound and the analogous Be, Ca, Sr, and Ba structures. Although most of our theoretical predictions come from density functional methods, the latter have been benchmarked using coupled cluster theory including single, double, and perturbative triplet excitations, CCSD(T) using cc‐pVTZ basis sets. Among our most important predictions are the energies for dissociation to the butadiene plus the RM?MR [R=(C₃H₇)₂(C₄H₈O)₂; M=Be, Mg, Ca, Si, and Ba] entities. The most reliable predictions for the dissociation energies are 99–104 (Be), 85–93 (Mg), 90–99 (Ca), 83–92 (Sr), and 83–94 (Ba) kcal mol^?1. Thus, there is reason to anticipate that the four unknown compounds should be achievable synthetically. The predicted metal–metal distances (not single bonds) are 2.89 Å (Mg???Mg), 3.46 Å (Ca???Ca), 3.75 Å (Sr???Sr), and 4.04 Å (Ba???Ba). The separated RM?MR compounds have longer M?M distances but genuine metal–metal single bonds. This perhaps counter intuitive result is due to the presence of the bridging carbons in the alkaline earth butadiene compounds. All five compounds incorporate metal–carbon ionic interactions.     

Polymerization by alkaline earth metal compounds—I. Studies on the polymerization of methylmethacrylate by triphenylmethyl metal derivatives and related compounds of calcium,strontium and barium

A series of related organo-alkaline earth metal compounds of formula (Ph₃C)MX(THF)_η, (M = Ca, Sr, Ba; X = Cl: M = Ca, Sr; X = Br: M = Ba; X = CPh₃), has been isolated and characterized using analytical and spectroscopic techniques. The polymerization of methylmethacrylate (MMA) has been studied using these organometallic compounds as initiators. Investigations of the tacticity variations of polymethylmethacrylate (PMMA) produced in 1,2-dimethoxyethane or tetrahydrofuran (THF) at 210 K have shown that the syndiotacticity is higher in the former solvent, decreases with the following changes in initiator composition: Ca > Sr ? Ba; Cl > Br; in THF, it is dependent on the monomer concentration. The molecular weight distributions of the PMMA samples are broad and have distinct bi- or poly-modal features. The polymerization process appears to be anionic in nature but the evidence suggests that more than one type of propagation occurs and mechanistic aspects are discussed. Polymerization of bulk MMA by these same initiators is also reported. The initiators RMX(THF)_n (M = Sr, R = Me, n = 3 or R = Et, n = 2) and (C₃H₅)SrBr(THF)₂ are shown to be inefficient for polymerization of MMA. The glass transition temperatures of a range of PMMA samples of differing tacticity are presented and discussed.     

Estimation of rare and radioactive constitutents in samples of Indian tobacco with the aid of low-level beta-counter

The extraction of radium and barium into a mixture of 1-phenyl-3-methyl-4-benzoylpyrazol-5-one (HPy) and trioctylphosphine oxide (TOPO) in n-hexane or cyclohexane was investigated as a function of pH and TOPO concentration. It was found that the synergistic enhancement of the extraction is caused by the formation of mixed complexes of type M(Py)₂ (TOPO)₃ and the overall extraction constants of both complexes were calculated.     

Synergistic extraction of radium using 2-thenoyltrifluoroacetone and tributyl phosphate or trioctylphosphine oxide

The extraction of radium into a mixture of 2-thenoyltrifluoroacetone (HTTA) and tributyl phosphate (TBP) or trioctylphosphine oxide (TOPO) in n-hexane or cyclohexane has been investigated with regard to the dependence on pH, and TBP and TOPO concentrations. It has been found that the formation of mixed complexes of the type Ra(TTA)₂ (TBP)₂ and Ra(TTA)₂(TOPO)₂ occurs and the overall extraction constants of both complexes were calculated. With the systems described, very high distribution ratios of radium have been attained; these may advantageously be used for the separation and concentration of traces of radium.     

Solid state photodecomposition of alkaline earth tris/malonato/ferrates/III/

Solid state photolysis of alkaline earth tris/malonato/ferrates/III/, i.e., M₃[Fe(CH₂C₂O₄)₃]₂.xH₂O /M=Mg, Ca, Sr, Ba/ has been investigated employing Mössbauer, infrared and reflectance spectroscopic techniques. The complexes were irradiated for 400 h using a medium pressure mercury vapour lamp of 250 Watts. Photoreduction led to the formation of M[Fe^II(CH₂C₂O₄)₂(H₂O)₂]. The extent of photoreduction showed the following order: Ca>Sr>Mg>Ba. The results have been compared with those of analogous alkaline earth tris/oxalato/ferrates/III/.     

Extraction liquide-liquide par des esters alkylphosphoriques. II. Extraction des nitrates de béryllium et des autres alcalino-terreux par le tri-n-butylphosphate

The solvent extraction systems Be(NO₃)₂? HNO₃? H₂O? TBP/kerosene and M(NO₃)₂? H₂O? TBP/kerosene (TBP = tri-n-butylphosphate, M = Be, Mg, Ca and Sr) have been studied. The alkaline earths elements are poorly extracted. Only very high acidities allow better extraction of beryllium. The sequence of extraction of the alkaline earths elements by the TBP depends on the concentration of the cations and is Ca > Be > Sr > Mg if the metal concentration is lower than 2 M.     

Determination of trace transition elements in ultra high purity sodium and calcium carbonates by neutron activation analysis

Résumé On mesure le cuivre 64 et le manganèse 56 dans du carbonate de sodium ultra pur par spectroscopie du rayonnement gamma après élimination du²⁴Na par passage sur colonnes de pentoxide d'antimoine hydraté (PAH); On a aussi déterminé le cobalt, le chrome et le fer par détection spectrométrique non-destructive du rayonnement gamma du⁶⁰Co,⁵⁹Fe et⁵¹Cr. Dans le cas de CaCo₃, après irradiation et dissolution, on a déterminé simultanément le⁶⁴Cu et le⁵⁶Mn, par une séparation radiochimique sélective à pH 3 à 4 avec un mélange de dithizone (H₂D) et d'acide pynolidinedithiocarbamique (HPDC) dans CHCL₃. L'interférence radioactive de⁴⁷Sc et⁴⁷Ca produits pendant 100 heures d'irradiation de CaCO₃, étaient supprimées par extraction sélective de ce dernier en milieu HCl 5,0 M par l'oxyde de Tri-n-octylphosphine (TOPO) 0,1 M dans du cyclohexane. On a utilisé en mélange de 0,1 M Thenoyltrifluoroacetone (HTTA) 0,1 M et de TOPO 0,1 M dans du cyclohexane pour enlever le⁴⁷Ca à pH≥8.0. Après avoir éliminé l'activité des isotopes de la matrice, on mesure les pics photoélectriques de⁵⁹Fe.⁶⁰Co et⁵¹Cr pour doser ces impuretés.      

Die Clusterazide M2[Nb6Cl12(N3)6]·(H2O)4—x (M = Ca,Sr, Ba)

The Cluster Azides M₂[Nb₆Cl₁₂(N₃)₆]·(H₂O)_4—x (M = Ca, Sr, Ba) The isotypic cluster compounds M₂[Nb₆Cl₁₂(N₃)₆] · (H₂O)_4—x (M = Ca (1) , M = Sr (2) and M = Ba (3) ) have been synthesized by the reaction of an aequeous solution of Nb₆Cl₁₄ with M(N₃)₂. 1 , 2 and 3 crystallize in the space group Fd3¯ (No. 227) with the lattice constants a = 1990.03(23), 2015.60(12) and 2043, 64(11) pm, respectively. All compounds contain isolated 16e— clusters whose terminal positions are all occupied by orientationally disordered azide ligands.     

Heat capacities and thermodynamic functions of new nanosized ferro-chromo-manganites LaM<Subscript>0.5</Subscript><Superscript>II</Superscript>FeCrMnO<Subscript>6.5</Subscript> (M<Superscript>II</Superscript>–Mg,Ca, Sr,Ba)

The heat capacities of nanosized ferro-chromo-manganites LaM_0.5 ^IIFeCrMnO_6.5 (M^II–Mg, Ca, Sr, Ba) are measured via dynamic calorimetry in the temperature range of 298.15–673 K using an IT-S-400 instrument. It is established that the C°_p~f(T) function of LaM_0.5 ^IIFeCrMnO_6.5 (M^II–Mg, Ca, Sr, Ba) has λ-type effects, due probably to phase transitions of the second order. Considering the temperatures of the phase transitions, equations of the heat capacity of ferro-chromo-manganites LaM_0.5 ^IIFeCrMnO_6.5 (M^II–Mg, Ca, Sr, Ba) as a function of temperature are derived on the basis of experimental data. Thermodynamic functions Н°(Т)–Н°(298.15), S°(Т), and Ф ^хх(Т) are calculated in the temperature range of 298.15–675 K.     

Heteronuclear Alkoxide Compounds Containing Copper and Alkaline Earth Metals

The tetrameric Cu(β-diketonate) alkoxide complex [Cu(thd)(OCH₂CH₂OCH₃)]₄ (thd = 2,2,6,6-tetramethyl-3,5-heptanedionate; 1a ) reacts with the alkaline earth metal alkoxides [M(OCH₂CH₂OCH₃)₂] (M = Ca, 2a ; M = Sr, 2b ; M = Ba, 2c ) to yield the heteronuclear compounds [Cu₂M(thd)₃(OCH₂CH₂OCH₃)₃] (M = Ca, 6a ; M = Sr, 6b ). These heterometallic complexes were also obtained in the reaction of 1a and the mixed Ca and Sr complexes of β-diketonate-alkoxide [M_x(thd)_y(OCH₂CH₂OCH₃)_2x?y] (M = Ca, x = 7, y = 6, 3 ; M = Sr, x = 5, y = 3, 4 ), respectively. In comparison, 1a reacts with the analogous [Ba(thd)(OCH₂CH₂OCH₃)] ( 5a ) to yield a[Ba₂Cu₂(thd)₄(OCH₃)₄(HOCH₂CH₂OCH₃)₂] species ( 8a .) The in situ prepared mixed-ligand Ba Compounds [Ba(thd)OR)] (R = CH₂CH₂OCH₂CH₂OCH₃, ( 5b ); R = CH₂CH₂CH₂OCH₃ ( 5c ) react with the corresponding Cu complexes [Cu(thd)(OR)]_n (R = CH₂CH₂OCH₂CH₂OCH₃), n = 4 ( 1b ); R = CH₂CH₂OCH₂CH₂OCH₃ ( 8b ); R = CH₂CH₂CH₂OCH₃ ( 8c ). However, [Cu(hfd)(OCH₂CH₂OCH₃)]₄ (hfd = 1,1,1,5,5,5,-hexafluoroacetylacetonate; 1e ) is converted in the presence of 2a–c to the simple metathesis products [M(hfd)₂] (M = Ca, Sr, Ba) and [Cu(OCH₂CH₂OCH₃)₂]. Crystalline [Ba₂Cu₂(hfd)₂(thd)₂(OCH₂CH₂CH₂OCH₃)₄(HOCH₂CH₂CH₂OCH₃)₂] ( 9 ) was isolated from the reaction of 1a with in situ prepared [Ba((hfd)OCH₂CH₂CH₂OCH₃)] ( 5d ) in 2-, methoxyethanol. X-Ray crystallographic structure determinations are reported for 6a , 6b , 8b , and 8c .     

Coordination architectures and luminescent properties of 5-(pyrimidyl)tetrazolate (Hpmtz) with group 2 metal ions

Four alkaline earth metal-organic frameworks, [Mg(H₂O)₆]?·?(pmtz)₂ (1), [Ca(pmtz) ₂(H₂O)₃]?·?H₂O (2), [Sr(pmtz)₂(H₂O)₄] (3), and [Ba(pmtz)₂(H₂O)₂]?·?4H₂O (4) [pmtz?=?5-(pyrimidyl)tetrazole anion], were synthesized and characterized by elemental analysis, IR spectroscopy, and X-ray crystallography. The crystal structures reveal that 1–3 are mononuclear while 4 displays a 2-D layer structure by bis(bidentate) bridging pmtz^?. The luminescence properties of 1–4 were investigated in the solid state at room temperature.