Discrimination of Lung Cancer Related Volatile Organic Compounds with a Colorimetric Sensor Array

A simple and rapid discrimination of four lung cancer related volatile organic compounds (VOCs) was achieved with a novel colorimetric sensor array. Based on the cross-responsive mechanism, the sensor system exhibited high sensitivity to selected lung cancer biomarkers, including p-xylene, styrene, isoprene, and hexanal with concentrations varying from 50 ppb to 500 ppb. By extracting color information, it provided good selectivity and fine discrimination of selected gases via pattern recognition with Fisher linear discriminant (FLD). Additionally, with the employment of the Takagi-Sogeno Fuzzy Neural Network (TSFNN), different concentrations of selected VOCs were discriminated. It also suggested that the colorimetric sensor array proposed could not only distinguish different lung cancer related VOCs but also discriminate specific VOCs of different concentrations with an average rate of classification up to 95%. Our preliminary study demonstrated that the cross-responsive sensor array had infinite potential for further clinical and commercial use for early diagnosis of lung cancer.     

Colorimetric Sensing of Nitroaromatic Energetic Materials Using Surfactant-Stabilized and Dithiocarbamate-Functionalized Gold Nanoparticles

Abstract

There is an increasing need for sensitive/selective determination of explosive traces in soil and post-blast debris for environmental and criminal investigations. A colorimetric sensor was developed to detect and quantify trinitrotoluene (TNT) and tetryl by the use of surfactant-stabilized and dithiocarbamate-functionalized gold nanoparticles (AuNPs). The sensor was manufactured by modifying the nanoparticles with the cationic surfactant cetyl trimethyl ammonium bromide and incorporating diethyldithiocarbamate (DDTC) in the AuNPs synthesis. DDTC firmly bound to AuNPs may show charge-transfer interactions with the —NO₂ groups of the analytes, and a color change proportional to analyte concentration accompanied the agglomeration of nanoparticles, at which the absorbances were recorded at 534?nm and 458?nm for TNT and tetryl, respectively. Although the limit of detection was 8?mgL^?1 (3.52?×?10^?5?molL^?1) for TNT and 0.8?mgL^?1 (2.78?×?10^?6?molL^?1) for tetryl, providing moderate sensitivity, the cost was greatly reduced compared to those of other thiol-functionalized AuNPs sensors. Possible interferences of other energetic substances in synthetic mixtures, of camouflage materials used in passenger belongings (e.g., detergent, sugar, caffeine, and paracetamol) and common soil ions were also examined. The method was statistically validated against a reference gas chromatography/mass spectrometry method. This sensor may pave the way for the manufacture of novel low-cost nitroaromatic explosive sensors made of DDTC-based pesticides.     

Colorimetric Determination Of Hydrogen Peroxide Based on Localized Surface Plasmon Resonance of Silver Nanoprisms Using a Microchannel Chip

Silver nanoprisms (AgNPrs) have unique optical phenomena due to their localized surface plasmon resonance that results in the extinction of light from the visible to the near-infrared spectral region. In this study, we propose the colorimetric determination of silver nanoprisms in microchannels using a smartphone camera. Image acquisition was performed by capturing an image of the colloidal solution of the silver nanoprisms in the microchannel using the transmitted light. Red, green, and blue chromaticity levels were extracted from the recorded images for further quantification of the silver nanoprisms. This technique was employed for the detection and colorimetric determination of hydrogen peroxide (H₂O₂). Good linearity between the change in the green chromaticity level and concentration of hydrogen peroxide was observed for values from 10 to 300?μM with an R² value of 0.9670. We anticipate that the developed methodology for the quantification of silver nanoprisms and hydrogen peroxide by monitoring the change in color in the images of transmitted light will enhance the development of simple, rapid, and reliable detection systems for quality control in the production of silver nanoprisms as well as in chemical sensor applications.     

Investigation of 3,3′,5,5′-tetramethylbenzidine as colorimetric substrate for a peroxidatic DNAzyme

In this work, the suitability of 3,3′,5,5′-tetramethylbenzidine sulfate (TMB) as the substrate of a DNAzyme catalytic system composed of a guanine-quadruplex DNA molecule and hemin was investigated. In the presence of H₂O₂, the hemin-DNA complex catalyzes the oxidation of TMB to produce two colored products, much like a peroxidase. The color-generating activity of this system could be influenced by several factors such as buffer type, pH value, DNA sequence, reaction time, and concentrations of both the hemin and H₂O₂. To illustrate the utility of this catalytic system, we designed a colorimetric assay, in which a synthetic oligonucleotide with a sequence complementary to the G-quadruplex DNA was used as the target. A detection limit of 1.86 nM was obtained. Our data have shown that TMB was an excellent colorimetric indicator that reported the peoxidase activities of the widely studied hemin-G-quadruplex DNAzyme system.     

Colorimetric Determination of Ampicillin and 6-Aminopenicillanic Acid Using Acenaphthenequinone as a Chromophoric Reagent

Abstract

A colorimetric method for the determination of ampicillin (Amp.) and 6-aminopenicillanic acid (6-APA) are described, based on the reaction of these drugs with acenaphthenequinone in basic media to give a highly intense red coloured product. The latter exhibits an absorption maximum at 610 nm with apparent molar absorptivities of 2.83 and 1.45 × 10⁴ l. mol^?1 cm^?1 and Sandell sensitivities of 0.013 and 0.015 μg cm^?2 for Amp. and 6-APA, respectively. The optimum concentration ranges are 0.4-10 and 0.4-14 μg ml^?1 for Amp. and 6-APA, respectively. For more accurate results, Ringbom optimum concentration ranges are 1–8.5 and 1–12 μg ml^?1 for Amp. and 6-APA, respectively. Statistical analysis indicated that there was no significant difference between the results obtained by the described method and those of the official methods. The mean recoveries percentage were found to be 99.5 × 1.1% for pharmaceutical formulations and 99.1 × 1.6% for serum and urine samples. The method is selective for the determination of Amp. or 6-APA in the presence of their degradation products, additives and excipiences that are normally encountered in dosage forms. The proposed method was applied successfully to the determination of Amp. in pharmaceutical formulations. Also, applicability of the proposed method to human serum and urine is presented and the validity assessed by applying the standard addition technique.     

光波导乙醇气体传感器的研究

以聚偏氟乙烯(PVDF)作为敏感试剂固定在钾(K⁺)离子交换玻璃光波导表面,研制了光波导乙醇气体传感器.该传感器具有可逆性好、灵敏度高、响应速度快、选择性和重现性好、能在室温操作等特点.     

Fluorescent Immunoassay with a Copper Polymer as the Signal Label for Catalytic Oxidation of O-Phenylenediamine

This work suggested that Cu²⁺ ion coordinated by the peptide with a histidine (His or H) residue in the first position from the free N-terminal reveals oxidase-mimicking activity. A biotinylated polymer was prepared by modifying His residues on the side chain amino groups of lysine residues (denoted as K_H) to chelate multiple Cu²⁺ ions. The resulting biotin-poly-(K_H-Cu)₂₀ polymer with multiple catalytic sites was employed as the signal label for immunoassay. Prostate specific antigen (PSA) was determined as the model target. The captured biotin-poly-(K_H-Cu)₂₀ polymer could catalyze the oxidation of o-phenylenediamine (OPD) to produce fluorescent 2,3-diaminophenazine (OPDox). The signal was proportional to PSA concentration from 0.01 to 2 ng/mL, and the detection limit was found to be eight pg/mL. The high sensitivity of the method enabled the assays of PSA in real serum samples. The work should be valuable for the design of novel biosensors for clinical diagnosis.     

Glucose oxidase as a blocking agent-based signal amplification strategy for the fabrication of label-free amperometric immunosensors

An effective electrochemical signal amplification strategy based on enzyme membrane modification and redox probe immobilization was proposed to construct an amperometric immunosensor.L-cysteine@ferrocene functionalized chitosan,which possessed not only efficient redox-activity but also excellent film-forming ability,was coated on the bare glass carbon electrode. Moreover,the thiol groups(SH)in the ferrocenyl compound were used for gold nanoparticles immobilization via the strong bonding interaction,which co...     

Label‐free Electrochemical Aptasensor for Carcino‐embryonic Antigen Based on Ternary Nanocomposite of Gold Nanoparticles,Hemin and Graphene

In this report, a label‐free electrochemical aptasensor for carcino‐embryonic antigen (CEA) was successfully developed based on a ternary nanocomposite of gold nanoparticles, hemin and graphene nanosheets (AuNPs‐HGNs). This nanocomposite was prepared by decorating gold nanoparticles on the surface of hemin functionalized graphene nanosheets via a simple wet‐chemical strategy. The aptamer can be assembled on the surface of AuNPs‐HGNs/GCE (glassy carbon electrode) through Au‐S covalent bond to form the sensing interface. Hemin absorbed on the graphene nanosheets not only acts as a protective agent of graphene sheets, but also as an in situ probe base on its excellent redox properties. Gold nanoparticles provide with both numerous binding sites for loading CEA binding aptamer (CBA) and good conductivity to promote the electron transfer. The current changes, which are caused by CEA specifically binding on the modified electrode, are exploited for the label‐free detection of CEA in a very rapid and convenient protocol. Therefore, the method has advantages of high sensitivity, wide linear range (0.0001–10 ng mL^?1), low detection limit (40 fg mL^?1) and attractive specificity. The results illustrate that the proposed label‐free electrochemical aptasensor has a potential application in the biological or clinical target analysis for its simple operation and low cost.     

纳米孔技术对PD-1抗原抗体结合检测的实验研究

肿瘤的免疫疗法是利用人体自身的免疫系统去治疗肿瘤的一种方法,程序性死亡受体1（PD-1）是肿瘤免疫疗法中的一种免疫检查点,利用PD-1或PD-L1的单克隆抗体,可以阻断PD-1/PD-L1信号通路,恢复T细胞的免疫杀伤功能,实现肿瘤的免疫治疗.为了研究PD-1抗体药物与人体PD-1抗原的结合有效性,以PD-1蛋白质分子为实验对象,用纳米孔传感器件开展了PD-1、PD-1抗体及其结合物的辨识.分别对纯PD-1蛋白质分子和其抗体分子进行了纳米孔过孔实验研究,发现PD-1及其抗体的相对堵塞电流幅值比分别为0.00404和0.01297,实现了抗原抗体分子的区分.并对Si₃N₄纳米孔内壁进行了PD-1抗体修饰,再将PD-1蛋白质分子通过经抗体修饰后的纳米孔,以期实现结合物的检测,实验结果显示部分抗原抗体实现了特异性结合,剩下部分呈游离状,所以纳米孔技术可实现抗原抗体结合物的区分.未来,纳米孔有望成为无标志检测药物有效性的一种新手段.     

模式识别用于压电晶体传感器阵列识别可燃物质

用７个压电晶体组成传感器阵列,每个晶体上分别涂有不同种类的气相色谱固定液,通过测定各种可燃物质燃烧时放出的混合气体来识别所燃物质,在识别中分别应用了人工神经网络法（ＡＮＮ）和逐步判别分析法（ＳＤＡ）。讨论了解决神经网络开始训练时不收敛或产生麻痹现象的方法,提出了训练数据选取的新方法－训练集逐步扩展法,实验证明：人工神经网络对被测物质的识别准确率达１００％,高于逐步判别分析法（８３％）。     

Sensitive and Green Method for Determination of Chemical Oxygen Demand Using a Nano‐copper Based Electrochemical Sensor

Copper nanoparticles (nano‐Cu) were electrodeposited on the surface of glassy carbon electrode (GCE) potentiostatically at −0.6 V vs. Ag/AgCl for 60 s. The developed nano‐copper modified glassy carbon electrode (nano‐Cu/GCE) was optimized and utilized for electrochemical assay of chemical oxygen demand (COD) using glycine as a standard. The surface morphology and chemical composition of nano‐Cu/GCE were investigated using scanning electron microscope (SEM) and energy dispersive X‐ray spectrometer (EDX), respectively. The electrochemical behavior was investigated using linear sweep voltammetry (LSV) which is characterized by a remarkable anodic peak at ∼0.6 V, compared to bare GCE. This indicates that nano‐Cu enhances significantly the electrochemical oxidation of glycine. The effect of different deposition parameters, such as Cu²⁺ concentration, deposition potential, deposition time, pH, and scan rate on the response of the developed sensor were investigated. The optimized nano‐Cu/GCE based COD sensor exhibited a linear range of 15 to 629.3 ppm, and a lower limit of detection (LOD) of 1.7 ppm (S/N=3). This developed method exhibited high tolerance level to chloride ion (0.35 M chloride ion has minimal influence). The analytical utility of the prepared COD sensor was demonstrated by investigating the COD recovery (99.8±4.3) and the assay of COD in different water samples. The results obtained were verified using the standard dichromate method.     

Electrocatalytic Sensor for the Determination of Chemical Oxygen Demand Using a Lead Dioxide Modified Electrode

An amperometric method that makes use of a nano‐PbO₂ modified electrode as an electrocatalytic sensor for the determination of chemical oxygen demand (COD) is described. The sensor signal was observed as a result of the detection of the oxidation current due to electrocatalytic oxidation of organic compounds in the sample solution. This sensor responded linearly to the COD_Cr of standard samples in the range of 5–3 000 ppm and the detection limit was 2.5 ppm. When using the sensor to determine real samples, it displays short analysis time, simplicity and no sample pretreatment. The sensor was stable for over 20 days in real wastewater samples and has successfully been applied to the determination of COD in real wastewater samples.     

用聚乙烯醇凝胶为基质的光导纤维铝传感器的研究

本文将桑色素通过氰脲酰氯固定在聚乙烯醇上,以戊二醛作为交联剂,在光导纤维上制得对铝离子产生荧光响应的聚乙烯醇凝胶传感膜,这种光纤传感器对铝离子的响应时间在10s以内,在3×10^-7～10^-4mol/L铝浓度范围内有良好的线性关系,实验结果与理论式相吻合。     

Colorimetric detection of morphine in a molecularly imprinted polymer using an aqueous mixture of Fe and [Fe(CN)6]

In this work, a molecularly imprinted polymer (MIP) of morphine (MO) was prepared through thermal radical copolymerization of methacrylic acid (MAA) and ethylene glycol dimethacrylate (EDMA) in the presence of MO templates, and a molecularly imprinted sorbent assay (MIA) based on a colorimetric reporter was developed to determine the adsorption isotherm of MO-MIP binding. In practice, the MO-bound MIP was brought into contact with an aqueous mixture of Fe³⁺ and [Fe(CN)₆]³⁻ so that the 3-phenolic group of MO was oxidized and Fe³⁺ was reduced to Fe²⁺. As a result, the MO-bound MIP was stained with Prussian blue (PB), which was attributed to the instant co-precipitation of Fe²⁺ and [Fe(CN)₆]³⁻ (K_sp=10⁻⁴⁰). Accordingly, MO-MIP binding of the blue dye could be detected by visible spectroscopy. In addition, such staining could successfully distinguish MO from codeine. Upon data analyses, a two-site binding isotherm with two dissociation constants of 6.00×10⁻⁵ and 1.03×10⁻³ M was found for MO-MIP binding. MIAs for non-MIP were also performed. In addition, the results of flow-system characterizations and the particle size effect are also described in this paper.     

磁弹性无线传感器检测不同液体介质中的金黄色葡萄球菌

研制了磁弹性金黄色葡萄球菌无线传感器,用于检测不同液体介质中的金黄色葡萄球菌。取0.2mL一定浓度菌液加到含2mL无菌液体介质的检测玻璃管中,磁弹性传感器共振频率随细菌的生长而改变。通过改变牛肉膏和蛋白胨的浓度,得出传感器在含有2×105cells/mL金黄色葡萄球菌的培养基CM2-2中共振频率响应最大。结果表明,此传感器可以测定的金黄色葡萄球菌浓度范围在CM2-2中是3×103～2×107cells/mL,在牛奶中是1×104～2×107cells/mL,检出限分别是1×103cells/mL和1×104cells/mL。传感器共振频移大小与金黄色葡萄球菌的浓度呈线性相关关系,相关系数在牛奶中是0.98,在培养基中是0.99。     

Cu2+修饰的氮掺杂石墨烯量子点荧光传感器检测2-巯基苯并噻唑的研究

采用一步水热合成法制备了氮掺杂石墨烯量子点(N-GQDs),量子点表面的特定官能团与Cu~(2+)进一步结合后,形成N-GQDs-Cu~(2+)络合物,有效地猝灭了荧光。加入2-巯基苯并噻唑(MBT)时,由于MBT与Cu~(2+)具有强作用力,使得Cu~(2+)从量子点表面解离下来,量子点荧光恢复。据此构建了一种基于Cu~(2+)修饰的氮掺杂石墨烯量子点的高灵敏荧光传感器用于MBT的检测。在最佳实验条件下,MBT在0.4～40.0μmol/L浓度范围内与荧光恢复强度呈良好线性,检出限为0.1μmol/L。该方法用于实际水样中MBT的检测,加标回收率为95.0%～101%。     

Determination of carcinoembryonic antigen using a novel amperometric enzyme-electrode based on layer-by-layer assembly of gold nanoparticles and thionine

Electrochemical sensing of carcinoembryonic antigen(CEA)on a gold electrode modified by the se- quential incorporation of the mediator,thionine(Thi),and gold nanoparticles(nano-Au),through co- valent linkage and electrostatic interactions onto a self-assembled monolayer configuration is de- scribed in this paper.The enzyme,horseradish peroxidase(HRP),was employed to block the possible remaining active sites of the nano-Au monolayer,avoid the non-specific adsorption,instead of bovine serum albumin(BSA),and amplify the response of the antigen-antibody reaction.Electrochemical ex- periments indicated highly efficient electron transfer by the imbedded Thi mediator and adsorbed nano-Au.The HRP kept its activity after immobilization,and the studied electrode showed sensitive response to CEA and high stability during a long period of storage.The working range for the system was 2.5 to 80.0 ng/mL with a detection limit of 0.90 ng/mL.The model membrane system in this work is a potential biosensor for mimicking the other immunosensor and enzyme sensor.     

PSS功能化海绵状石墨烯电化学传感灵敏检测瑞香素的研究

通过绿色环保、简单易行的方法合成聚苯乙烯磺酸钠(PSS)功能化的海绵状石墨烯(3D-PSS-rGO),利用紫外-可见吸收光谱及扫描电镜对复合材料进行表征和分析,构筑了基于3D-PSS-rGO复合材料修饰玻碳电极检测瑞香素的电化学传感器。结果表明,3D-PSS-rGO/GCE对瑞香素有较强富集作用,对瑞香素表现出优异的电催化活性。在优化实验条件下,瑞香素浓度在0.08～10.0μmol/L和10.0～60.0μmol/L范围内与其氧化峰电流呈良好的线性关系,检出限(S/N=3)为0.04μmol/L。将该传感用于祖师麻粉中瑞香素含量的检测,回收率为90.0%～96.0%。该研究为中药材中瑞香素含量的测定提供了方法参考。     

Study on the Synthesis of ZnO Nanoparticles Using Azadirachta indica Extracts for the Fabrication of a Gas Sensor

This paper compared the effects of A. indica plant proteins over chemical methods in the morphology of zinc oxide nanoparticles (ZnO NPs) prepared by a co-precipitation method, and ethanol sensing performance of prepared thin films deposited over a fluorene-doped tin oxide (FTO) bind glass substrate using spray pyrolysis technique. The average crystallite sizes and diameters of the grain-sized cluster ZnO NPs were 25 and (701.79 ± 176.21) nm for an undoped sample and 20 and (489.99 ± 112.96) nm for A. india dye-doped sample. The fourier transform infrared spectroscopy (FTIR) analysis confirmed the formation of the Zn–O bond at 450 cm⁻¹, and also showed the presence of plant proteins due to A. indica dye extracts. ZnO NPs films exhibited good response (up to 51 and 72% for without and with A. indica dye-doped extracts, respectively) toward ethanol vapors with quick response-recovery characteristics at a temperature of 250 °C for undoped and 225 °C for A. indica dye-doped ZnO thin films. The interaction of A. indica dye extracts helps to decrease the operating temperature and increased the response and recovery rates of the sensor, which may be due to an increase in the specific surface area, resulting in adsorption of more oxygen and hence high response results.