Biamperometric Determination of Tetracycline in Pharmaceuticals

Abstract

A fast, reliable, and low cost biamperometric flow‐injection method, with an error of 1.3% and an analytical throughput of 55 samples h^?1, for determination of tetracycline hydrochloride in pharmaceuticals capsules is proposed. The analytical curve was linear (r=0.998) in the range 10 to 50 mg l^?1 using Fe(CN)₆ ^3? and NaOH solutions as reagent and carrier stream/supporting electrolyte, respectively. A relative standard deviation of 1.6% (10 sequential injections of 30.0 mg l^?1) was verified with detection and quantification limits of 0.6 and 3.4 mg l^?1, respectively.     

Determination of Aluminum Traces in Hemodialysis and Tap Water Using Standard Method's Procedure Modified and Flow Injection Ionic Exchange Preconcentration

Abstract

A procedure for the spectrophotometric determination of aluminum traces in water using a flow injection (FI) preconcentration system has been proposed. The flow system was made up of a peristaltic pump, an injector‐commutator, and a minicolumn filled with 300.0 mg of Amberlite IR‐120 cationic exchange resin. After the preconcentration step, aluminum was eluted by a 4.0 mol l^?1 HCl solution. In a second stage, out of the flow system, the eluate was neutralized with a 4.0 mol l^?1 NaOH solution. The aluminum was submitted to the reaction with eriochrome cyanine to form a chelate in solution buffered to pH 5.85, according to the Standard Method's procedure with some modifications, and this was followed by spectrophotometric detection. Chemical and flow variables were studied in the preconcentration system. The precision of the proposed method was calculated for a solution containing 46.8 µg l^?1 of Al(III), when 40.0 ml of solution were preconcentrated (n=7), and their respective relative standard deviation (RSD) was 1.8%. The detection limit obtained was 1.7 µg l^?1 of Al(III) (sample volume=40.0 ml). The proposed method was successful in determining aluminum in water certified reference material.     

Square‐Wave Voltammetry Determination of Aspartame in Dietary Products Using a Boron‐Doped Diamond Electrode

Abstract

The use of square‐wave voltammetry in conjunction with a cathodically pretreated boron‐doped diamond electrode for the analytical determination of aspartame in dietary products is described. In this determination, the samples were analyzed without previous treatment in a 0.5 mol l^?1 H₂SO₄ solution. A single oxidation peak at a potential of 1.6 V vs. Ag/AgCl (3.0 mol l^?1 KCl) with the characteristics of an irreversible reaction was obtained. The analytical curve was linear in the aspartame concentration range 9.9×10^?6 to 5.2×10^?5 mol l^?1 with a detection limit of 2.3×10^?7 mol l^?1. The relative standard deviation (n=5) obtained was smaller than 0.2% for the 1.0×10^?4 mol l^?1 aspartame solution. The proposed method was applied with success to the determination of aspartame in several dietary products and the results were similar to those obtained using an HPLC method at 95% confidence level.     

LC-ED with an Acetylene Black–Dihexadecyl Hydrogen Phosphate Composite Film-Modified Electrode for in Vivo Analysis of Thiols in Rat Striatal Microdialysate

Liquid chromatography with electrochemical detection (LC-ED), coupled with in vivo microdialysis sampling, has been used for analysis of thiols. An acetylene black–dihexadecyl hydrogen phosphate (AB–DHP) composite film-modified electrode was used as working electrode. The AB–DHP-modified electrode enabled efficient electrocatalytic oxidation of l-cysteine (l-Cys) and glutathione (GSH) with relatively high sensitivity, stability, and longevity. The peak currents of l-Cys and GSH were linear in the concentrations ranges 2.0 × 10^?7–2.0 × 10^?4 and 3.0 × 10^?7–5.0 × 10^?4 mol L^?1, respectively, with calculated detection limits (S/N = 3) of 1.0 × 10^?7 and 2.0 × 10^?7 mol L^?1, respectively. The method has been successfully used to measure the amounts of l-Cys and GSH in striatal microdialysate of freely moving rats.     

A Multicommuted Flow‐based System for Hydrogen Peroxide Determination by Chemiluminescence Detection Using a Photodiode

Abstract

A simple, rapid, and automated assay for hydrogen peroxide in pharmaceutical samples was developed by combining the multicommutation system with a chemiluminescence (CL) detector. The detection was performed using a spiral flow‐cell reactor made from polyethylene tubing that was positioned in front of a photodiode. It allows the rapid mixing of CL reagent and analyte and simultaneous detection of the emitted light. The chemiluminescence was based on the reaction of luminol with hydrogen peroxide catalyzed by hexacyanoferrate(III).

The feasibility of the flow system was ascertained by analyzing a set of pharmaceutical samples. A linear response within the range of 2.2–210 µmol l^?1 H₂O₂ with a LD of 1.8 µmol l^?1 H₂O₂ and coefficient of variations smaller than 0.8% for 1.0×10^?5 mol l^?1 and 6.8×10^?5 mol l^?1 hydrogen peroxide solutions (n=10) were obtained. Reagents consumption of 90 µg of luminol and 0.7 mg of hexacyanoferrate(III) per determination and sampling rate of 200 samples per hour were also achieved.     

Photo-induced flow-injection determination of nitrate in water

A sensitive flow-injection method for the chemiluminescent determination of ultra-low concentration of nitrate in water is presented. Nitrate is on-line photolytically converted to peroxynitrite by absorption of UV light inside of 60 mm long quartz capillary (i.d. 530 µm, o.d. 720 µm). Peroxynitrite is subsequently determined by the chemiluminescent reaction with luminol. The detection limit of nitrate is 7 × 10^?10 M (S/N = 3). The linear range of the method is 2 × 10^?9–1 × 10^?5 M nitrate. The interference of nitrite is eliminated by its conversion to nitrogen after mixing of sample with a solution of sulfamidic acid. Other common anions do not interfere. The interference of cations is eliminated by passing the sample through a cation-exchange column. The FIA procedure allows analysing of 15 samples per hour. The method was applied to the determination of nitrate in various real water samples. The results are in good agreement with a reference ion chromatographic method.     

Determination of Ammonia in Water Using Flow Injection Analysis with Automatic Pervaporation Enrichment

Abstract

An automated ammonia monitoring system has been developed by putting a pervaporation unit in an enrichment cycle used in flow injection analysis mode. In the proposed system, an enrichment cycle was equipped to enable the adjustment for the measuring range of ammonium by controlling the duration of the enrichment circulation. Therefore, the system was capable to determine ammonia in both the surface water with low ammonia concentration and the ammonia-rich wastewater with the linear dynamic range of 0.05–15 mg l^?1 and 15–50 mg l^?1, respectively. The relative standard deviations were less than 1.9% and the quantification limit is as low as 0.03 mg l^?1. The sampling frequency is 8–10 h^?1.     

The Use of Ultrasound for the Analytical Determination of Nitrite on Diamond Electrodes by Square Wave Voltammetry

Abstract

This work describes an analytical methodology for the determination of nitrite ions in aqueous solutions using boron‐doped diamond electrodes and square wave voltammetry associated with ultrasound radiation. The nitrite ions were oxidized to nitrate ions in Britton‐Robinson buffer solutions 0.1 M, pH 2.0 at 1.0 V versus Ag/AgCl. The voltammetric response of nitrite in the presence of ultrasound showed a peak current five times higher than the obtained in silent conditions. Thus, the detection limit obtained in the presence of radiation was 17 nM (0.782 µg l^?1), a small value if compared with that obtained in the absence of ultrasound: 140 nM (6.44 µg l^?1).     

Determination of Benzoyl Peroxide Levels in Wheat Flour and Pharmaceutical Preparations by Differential Pulse Voltammetry in Nonaqueous Media

Abstract

Benzoyl peroxide (BP) was determined by differential pulse voltammetry (DPV) using a glassy carbon electrode in a dichloromethane‐acetic acid (1.5×10^?2 mol l^?1) solution and tetrabutyl ammonium perchlorate (0.01 mol l^?1) as the supporting electrolyte. The peak potential was ?0.045 V (vs. Ag/AgCl). There was a good linear relationship between the peak current and the benzoyl peroxide concentration in the range of 2.5×10^?6–1.0×10^?4 mol l^?1. The detection limit of the method was 2.5×10^?7 mol l^?1. The recovery was 94.8–106.0%. The samples of wheat flour and the pharmaceutical preparations for the treatment of acne vulgaris were directly detected with desired results. The reaction mechanism of benzoyl peroxide on the electrode was also discussed, which was two electrons and two protons irreversible reaction.     

Flow-Injection Analysis Based on Extraction and Spectrophotometric Determination of Penicillins with Thiazine Dyes

Abstract

A new method for flow-injection analysis (FIA) for the determination of penicillins based on the extraction and spectrophotometric determination of ion associates with selected thiazine dyes (methylene blue, azure A, and azure B) is proposed. The reaction conditions (c_dye = 2 × 10^?4 mol l^?1, c_KCl = 1 mol l^?1, pH ? 6, λ = 635 nm) were found. The factorial design has been carried out to determine the optimum flow conditions. A wide linear dynamic range of calibration curves (5.1–700 µg ml^?1 for penicillin V with all dyes, R = 0.9985) and good repeatability (e.g., relative standard deviation [RSD] = 4.6–0.6% in this concentration range for the reaction with azure B) were found. The detection limit for penicillin V is 1.5 µg ml^?1, and the determination limit is 5.1 µg ml^?1. The maximum analysis rate is 35 samples per h. The practical samples of pharmaceutics were tested. There are no interferences from the additives in pharmaceutics.     

Application of Pulsed Flow Analysis for Chemiluminescent Screening of Fluoxetine Counterfeit Pharmaceuticals

Abstract

A chemiluminometric methodology for fluoxetine determination based on its antioxidant scavenger effect on the fast chemiluminescence reaction between luminol and hypochlorite, is proposed. The developed procedure was implemented in a fully automated multi‐pumping flow system, combining the excellent mixing characteristics of the pulsed flow with chemiluminescence detection, resulting on a sensitive, simple, and fast procedure for fluoxetine determination in pharmaceutical formulations. Linear calibration plots for fluoxetine hydrochloride concentrations of up to 10 mg l^?1 (r=0.9995, n=7) were obtained, with an r.s.d<2% (n=10). Detection limit (3 σ) was 0.31 mg l^?1 and the sampling rate was about 136 determinations per h.     

HPLC for Separation and Quantification of Deoxyribonucleic Acid Fragments and Measurement of Deoxyribonucleic Acid Degradation

DNA quantification has made its mark in pharmaceutical analysis and the life sciences. In particular, in the quality control of nucleic acid drugs and the detection and quantification of genetically modified organisms, evaluation of the DNA degradation rate has become imperative. In this study, by using high-performance liquid chromatography with an anion-exchange column, we established a method for the separation and quantification of DNA fragments in mixed DNA samples. By using a NaCl concentration gradient, DNA fragments in mixed DNA sample were separated well. A calibration curve from 0.05 to 12.4 ng μL^?1 was obtained with high linearity and the correlation coefficient was 0.9999. The limit of detection was 0.02 ng μL^?1 and the limit of quantification was 0.06 ng μL^?1 for S/N = 3 or S/N = 10, respectively. The relative standard deviation was less than 2 % in the measurement of peak area repeatability. The recovery of approximately 1 ng μL^?1 of a specific DNA spiked in a mixed DNA sample was 99.9 ± 3.6 %. The method was able to measure the degradation rate of 600 bp DNA with a variation of approximately 1 %.     

Immobilization of Horseradish Peroxidase on a Biocompatible Titania Layer–Modified Gold Electrode for the Detection of Hydrogen Peroxide

Abstract

A procedure for fabricating an enzyme electrode has been described based on the effective immobilization of horseradish peroxidase to an ultrathin titania layer–modified self‐assembled gold electrode. The resulting electrode exhibits excellent electrocatalytical activity to hydrogen peroxide in the presence of hydroquinone as a mediator. The analytical conditions were studied in detail by using an amperometric method. Under the optimized conditions, a detection limit of 7.1×10^?7 mol l^?1 and a linear response to hydrogen peroxide that ranged from 1×10^?6 mol l^?1 to 7.6×10^?4 mol l^?1 were obtained. The reproducibility and stability were examined with satisfactory results.     

A simple method for determination of urapidil at a glassy carbon electrode modified with poly(sodium4-styrenesulfonate) functionalized graphene

ABSTRACT

A simple, highly sensitive voltammetric method for the determination of urapidil at poly(sodium4-styrenesulfonate) functionalized graphene-modified electrode (PSS-Gr/GCE) was described. Based on the PSS-Gr composites-modified glassy carbon electrode as a simple voltammetric sensor, it exhibited good conductivity and high sensitivity to urapidil. Under the optimize condition, a good linear relationship was obtained between peak currents and urapidil concentrations in the wider range of 2.0 × 10^?9–8.0 × 10^?8 mol L^?1 and 2.0 × 10^?7–2.0 × 10^?5 mol L^?1 with detection limit of 8 × 10^?10 mol L^?1 (S/N = 3). Based on the high sensitivity and good selectivity of the proposed electrode, the proposed method could apply to the detect of urapidil in urapidil sustained release tablets with satisfactory results.     

Nitrate Removal and Nitrate Removal Velocity in Coastal Louisiana Freshwater Wetlands

Nitrate removal and nitrate removal velocity rate were determined for Mississippi River deltaic plain forested-tupelo dominated wetland, and a floating emergent freshwater marsh. Nitrate removal rate from floodwater was 19.45 and 48.90 mg N m^?2 d^?1 for two forested-tupelo wetland sites and 48.41 and 46.98 mg N m^?2 d^?1 at two floating emergent freshwater marsh sites. The removal velocity constants (k) of NO₃-N ranged from 0.44 to 1.44 per day for the four site studies. Removal velocity of nitrate from the water column was faster in the floating emergent marsh cores than from the forested wetland course, which contained more sediment. Results demonstrated that removal velocity is an important parameter when estimating nitrate removal from floodwater. Results also demonstrated the two freshwater wetland habitats had a high capacity for processing any nitrate entering the wetlands from adjacent agriculture area. Removal was attributed to denitrification and diffusion.     

Spectrophotometric Multicommutated Flow System for the Determination of Hypochlorite in Bleaching Products

Abstract

A multicommutation flow system for the spectrophotometric determination of hypochlorite in bleaching products is proposed. In this system, N,N-diethyl-p-phenylenediamine (DPD) reacts with hypochlorite, and the product was monitored at 515 nm. The analytical curve for hypochlorite was linear in the concentration range from 2.68 × 10^?5 to 1.88 × 10^?4 mol L^?1 (2–14 mg L^?1) with a detection limit of 6.84 × 10^?6 mol L^?1 (0.51 mg L^?1). The sampling rate was 45 h^?1, and a relative standard deviation of 1.4% (n = 10) was obtained. The recovery of this analyte ranged from 97.2% to 102.5%, and the results found using the proposed spectrophotometric multicommutated flow system agreed with the data obtained using a reference method (iodometric titration) at the 95% confidence level.     

Flow Injection and Batch Spectrophotometric Determination of Ibuprofen Based on its Competitive Complexation Reaction with Phenolphthalein‐β‐Cyclodextrin Inclusion Complex

Abstract

Rapid, simple, and accurate spectrophotometric method is presented for the determination of ibuprofen by batch and flow injection analysis methods. The method is based on ibuprofen competitive complexation reaction with phenolphthalein‐β‐cyclodextrin (PHP‐β‐CD) inclusion complex. The increase in the absorbance of the solution at 554 nm by the addition of ibuprofen was measured. Ibuprofen can be determined in the range 8.0×10^?6 ?3.2×10^?4 and 2.0×10^?5?5.0×10^?3 mol l^?1 by batch and flow methods, respectively. The limit of detection and limit of quantification were 6.19×10^?6 and 2.06×10^?5 mol l^?1 for batch and 1.77×10^?5 and 5.92×10^?5 mol l^?1 for flow method, respectively. The sampling rate in flow injection analysis method was 120±5 samples h^?1. The method was applied to the determination of pharmaceutical formulations.     

Ultrasensitive Assay of Gatifloxacin at Picogram Level Based on its Enhancing Effect on the Myoglobin‐Luminol Chemiluminescence Reaction

Abstract

Picogram‐level gatifloxacin was determined based on its significantly catalyzed effect on myoglobin‐luminol chemiluminescence (CL) reaction in the flow injection system. The enhanced chemiluminescence intensity was linear with gatifloxacin concentration in the range from 50 ngl^?1–10 µg l^?1 (r²=0.9995), and the detection limit was 20 ng l^?1 (3σ). At a flow rate of 2.0 ml min^?1 for each line, a complete analytical process could be performed within 0.5 min, including sampling and washing, with a relative standard deviation of less than 4.0% (n=7). The proposed method was applied successfully in the determination of gatifloxacin in tablets, human serum and urine samples with the recovery from 97.4–104.5%.     

Plant Regeneration Through Callus Organogenesis and True-to-Type Conformity of Plants by RAPD Analysis in Desmodium gangeticum (Linn.) DC.

An efficient plant regeneration protocol was established for an endangered ethnomedicinal plant Desmodium gangeticum (Linn.) DC. Morphogenic calli were produced from 96 % of the cultures comprising the immature leaf explants on Murashige and Skoog (MS) medium supplemented with 2,4-dichlorophenoxyacetic acid (4.0 mg?l^?1) in combination with 6-benzylaminopurine (BA; 0.8 mg?l^?1). For callus regeneration, various concentrations of BA (1.0–5.0 mg?l^?1) or thidiazuron (TDZ; 1.0–5.0 mg?l^?1) alone or in combination with indole-3-acetic acid (IAA; 0.2–1.0 mg?l^?1) were used. Highest response of shoot regeneration was observed on MS medium fortified with TDZ (4.0 mg?l^?1) and IAA (0.5 mg?l^?1) combination. Here, 100 % cultures responded with an average number of 22.3 shoots per gram calli. Inclusion of indole-3-butyric acid in half MS medium favored rooting of recovered shoots. Out of 45 rooted plants transferred to soil, 40 survived. Total DNA was extracted from the leaves of the acclimatized plants of D. gangeticum. Analysis of random amplified polymorphic DNA using 13 arbitrary decanucleotide primers showed the genetic homogeneity in all the ten plants regenerated from callus with parental plant, suggesting that shoot regeneration from callus could be used for the true-to-type multiplication of this plant.     

Trace Analysis of Lead and Copper Ions in Fish Tissue Using Paste Electrodes

Abstract

DNA was immobilized onto a carbon nanotube surface through cyclic voltammetry, in which paste electrode (PE) was subjected to lead and copper trace ion analysis. Optimized conditions for square‐wave stripping voltammetry were then searched. The results indicated three other linear working ranges—3–21 mg l^?1, 2–16 µg l^?1, and 3–17 ng l^?1 Pb(II) Cu(II)—within an accumulation time of 190 s in 0.1‐M ammonium phosphate electrolyte solutions of pH 10.0. At the optimized conditions, the detection limit (S/N) was pegged at 0.4 ng l^?1 (1.93×10^?12 M Pb(II) and 6.29×10^?12 M Cu(II)). And the relative standard deviation at 10 mg l^?1 Pb(II) and Cu(II) was a 0.074 and 0.069% precision, in 15 measurements. The method can be applied to assays of fish tissue.