注塑型聚甲基丙烯酸甲酯多通道微流控芯片的研制及其性能考察

微流控芯片技术因具有微量、快速、高效和高通量等特点,已成为分析化学领域中的研究热点之一．在微流控芯片中,最常见的可用作芯片的材料为玻璃、石英和各种塑料．玻璃和石英有很好的电渗性和光学性质,可采用标准的刻蚀工艺加工和用化学方法进行表面改性,但加工成本较高,封接难度较大．     

Modification of a poly(methyl methacrylate) injection-molded microchip and its use for high performance analysis of DNA

Inexpensive and permanently modified poly(methyl methacrylate)(PMMA) microchips were fabricated by an injection-molding process. A novel sealing method for plastic microchips at room temperature was introduced. Run-to-run and chip-to-chip reproducibility was good, with relative standard deviation values between 1-3% for the run-to-run and less than 2.1% for the chip-to-chip comparisons. Acrylonitrile-butadiene-styrene (ABS) was used as an additive in PMMA substrates. The proportions of PMMA and ABS were optimized. ABS may be considered as a modifier, which obviously improved some characteristics of the microchip, such as the hydrophilicity and the electro-osmotic flow (EOF). The detection limit of Rhodamine 6G dye for the modified microchip on the home-made microchip analyzer showed a dramatic 100-fold improvement over that for the unmodified PMMA chip. A detection limit of the order of 10(-20) mole has been achieved for each injected psiX-174/HaeIII DNA fragment with the baseline separation between 271 and 281 bp, and fast separation of 11 DNA restriction fragments within 180 seconds. Analysis of a PCR product from the tobacco ACT gene was performed on the modified microchip as an application example.     

Multi-channel PMMA microfluidic biosensor with integrated IDUAs for electrochemical detection

A novel multi-channel poly(methyl methacrylate) (PMMA) microfluidic biosensor with interdigitated ultramicroelectrode arrays (IDUAs) for electrochemical detection was developed. The focus of the development was a simple fabrication procedure and the realization of a reliable large IDUA that can provide detection simultaneously to several microchannels. As proof of concept, five microchannels are positioned over a large single IDUA where the channels are parallel with the length of the electrode finger. The IDUAs were fabricated on the PMMA cover piece and bonded to a PMMA substrate containing the microfluidic channels using UV/ozone-assisted thermal bonding. Conditions of device fabrication were optimized realizing a rugged large IDUA within a bonded PMMA device. Gold adhesion to the PMMA, protective coatings, and pressure during bonding were optimized. Its electrochemical performance was studied using amperometric detection of potassium ferri and ferro hexacyanide. Cumulative signals within the same chip showed very good linearity over a range of 0–38 μM (R ²?=?0.98) and a limit of detection of 3.48 μM. The bonding of the device was optimized so that no cross talk between the channels was observed which otherwise would have resulted in unreliable electrochemical responses. The highly reproducible signals achieved were comparable to those obtained with separate single-channel devices. Subsequently, the multi-channel microfluidic chip was applied to a model bioanalytical detection strategy, i.e., the quantification of specific nucleic acid sequences using a sandwich approach. Here, probe-coated paramagnetic beads and probe-tagged liposomes entrapping ferri/ferro hexacyanide as the redox marker were used to bind to a single-stranded DNA sequence. Flow rates of the non-ionic detergent n-octyl-β-d-glucopyranoside for liposome lysis were optimized, and the detection of the target sequences was carried out coulometrically within 250 s and with a limit of detection of 12.5 μM. The robustness of the design and the reliability of the results obtained in comparison to previously published single-channel designs suggest that the multi-channel device offers an excellent opportunity for bioanalytical applications that require multianalyte detection and high-throughput assays.

Ion Chromatographic Determination of Traces of Sodium,Magnesium and Chlorine in Gadolinium Nitrate

Abstract

Two independent and sensitive ion chromatographic methods with suppressed conductivity were developed for determination of traces of Cl, Na, and Mg in gadolinium-nitrate. Na-Mg was determined by cation-exchange column after matrix separation, whereas Cl was analyzed without matrix separation by high capacity anion-exchange column. Detection limit for Cl was 0.01 µg mL^?1 in sample solution and 1 µg g^?1 in solid sample. The reproducibility (100 µL injected) was better than 3%, 3% and 4% at 50, 25 and 50 µg L^?1 level for Cl, Na, and Mg respectively. The overall precision was better than ±7% for Na-Mg and ±5% for Cl.     

The Influence of Gold Nanoparticles on Simultaneous Determination of Uric Acid and Ascorbic Acid

A three-dimensional L-cysteine (L-cys) monolayer assembled on gold nanoparticles (GNP) providing simultaneous detection of uric acid (UA) and ascorbic acid (AA) was studied in this work. The cyclic voltammetry demonstrated that, at a bare glassy carbon electrode (GCE) or planar gold electrode, the mixture of UA and AA showed one overlapped oxidation peak; whereas when the electrode was modified with GNP, the oxidation peaks for UA and AA were separated. While a GNP modified electrode was further modified with L-cys monolayer (L-cys/GNP/GCE), namely, three-dimensional L-cys monolayer, a better separation for UA and AA response was obtained. Interestingly, the L-cys monolayer-modified planar gold electrode presented a block effect on the oxidation of AA, which was facilitated by the three-dimensional L-cys monolayer attributed to its distinct structure. The pH of solution presented a noticeable effect on the separation of UA and AA at GNP modified electrodes with or without L-cys monolayer. Wide concentration ranges from 2 × 10^?6?1 × 10^?3 M to UA and 2 × 10^?6?8 × 10^?4 M to AA could be obtained at L-cys/GNP/GCE.     

Separation of carrier-free 90Y from 90Sr using flat sheet supported liquid membranes containing multiple diglycolamide-functionalized calix[4]arenes

Abstract

Five diglycolamide-appended calix[4]arene (C4DGA) ligands, viz. C4DGA with no substituent (L-I), n-propyl (L-II), 3-pentyl (L-III), n-octyl (L-IV) and both side (L-V) substituents were evaluated for the separation of carrier free ⁹⁰Y from a ⁹⁰Y–⁹⁰Sr mixture using the flat sheet supported liquid membrane technique. Based on the results of earlier batch studies, the transport properties of the C4DGA ligands towards Y(III) and Sr(II) were monitored at two different feed acidities. The transport rates were significantly lower for 6 M HNO₃ as compared to 3 M HNO₃ as the feed. After 6 h, the observed trend of Y(III) transport with the C4DGA ligands using a feed of 3 M HNO₃ was: L-I ~ L-III > L-V > L-IV > L-II which changed to L-III > L-I > L-IV > L-V > L-II for 6 M HNO₃ as the feed. With 3 M HNO₃ as feed, >97% Y(III) transport was obtained with L-I and L-III in 6 h. Comparative Sr(II) transport was negligible resulting in high decontamination factors. In a one-step separation process, using L-I as the carrier ligand, pure ⁹⁰Y was obtained as the respective complex with either EDTA or DOTA. The highlights of this liquid membrane-based separation method comprise: its easiness, one-step separation, low ligand inventory, relatively pure product and continuous method.     

Electrospun octa(3-chloropropyl)-polyhedral oligomeric silsesquioxane-modified polyvinylidene fluoride/poly(acrylonitrile)/poly(methylmethacrylate) gel polymer electrolyte for high-performance lithium ion battery

Gel polymer electrolyte (GPE) based on octa(3-chloropropyl)-polyhedral oligomeric silsesquioxane (OCP-POSS)-modified polyvinylidene fluoride/poly(acrylonitrile) /poly(methylmethacrylate) (PVDF/PAN/PMMA) fibrous membrane was prepared by electrospinning method to improve the thermal stability of GPE and prevent the leakage of liquid electrolyte for lithium ion battery. The effect of OCP-POSS content on the morphology, porosity and electrolyte uptake, mechanical strength, thermal stability of spinning fibrous membrane and ionic conductivity, electrochemical stability window, and interface resistance of GPE was investigated. The cycle performance of cells assembled with GPE was also tested. The results show that the spinning fibrous membrane with 10 wt% OCP-POSS possesses high electrolyte uptake (660%) and excellent thermal stability. The ionic conductivity of corresponding GPE is 9.23 × 10^?3 S cm^?1 at room temperature and the electrochemical stability window is up to 5.82 V; the interface resistance of 10 wt% OCP-POSS modified GPE decreases by 42% after 168 h compared with pure PVDF/PAN/PMMA GPE. Furthermore, cells assembled with 10 wt% OCP-POSS modified GPE show high discharge capacity (166.5 mA h g^?1 at 0.1 C) and excellent cycle stability during 50 cycles. The results indicate that the GPE could improve the safety of lithium ion battery and show great potential in lithium ion battery applications.     

Static adsorptive coating of poly(methyl methacrylate) microfluidic chips for extended usage in DNA separations

A simple and robust static adsorptive (dynamic) coating process using 2% hydroxyethylcellulose was developed for surface modification of poly(methyl methacrylate) (PMMA) microfluidic chips for DNA separations, suitable for usage over extended periods, involving hundreds of runs. The coating medium was also used as a sieving matrix for the DNA separations following the coating process. Four consecutive static treatments, by simply filling the PMMA chip channels with sieving matrix once every day, were required for obtaining a stable coating and optimum performance. The performance of the coated chips at different phases of the coating process was studied by consecutive gel electrophoretic separations with LIF detection using a PhiX-174/HaeIII DNA digest sample. The coated chip, with daily renewal of the sieving matrix, showed high stability in performance during a 25-day period of systematic study, involving more than 100 individual runs. The performance of the coated chip also remained almost the same after 3 months of continuous usage, during which over 200 separations were performed. The average precision of migration time for the 603-bp fragment was 1.31% RSD (n = 6) during the 25-day study, with a separation efficiency of 6.5 x 10(4) plates (effective separation length 5.4 cm).     

Size‐based proteins separation using polymer‐entrapped colloidal self‐assembled nanoparticles on‐chip

We report on a facile method to stabilize colloidal self‐assembled (CSA) nanoparticles packed in microchannels for high speed size‐based separation of proteins. Silica nanoparticles, self‐assembled in a network of microfluidic channels, were stabilized with a methacrylate polymer prepared in situ through photopolymerization. The entrapment conditions were investigated to minimize the effect of the polymer matrix on the structure of the packing and the separation properties of the CSA beds. SEM shows that the methacrylate matrix links the nanoparticles at specific sphere–sphere contact points, improving the stability of the CSA structure at high electric fields (up to at least 1800 V/cm), allowing fast and efficient separation. The %RSD of the protein migration times varied between 0.3 and 0.5% (n = 4, in 1 day) and <0.83% over a period of 7 days (n = 28 runs) in a single device, at high field strength. The overall %RSD of protein migration times from chip‐to‐chip across a single fabrication run was 4.3% (n = 3) and between fabrication runs was 11% (n = 35), with 87% fabrication yield, demonstrating reproducible packing and entrapment behavior. The optimized entrapped CSA beds demonstrated better separation performance (plate height, H ～ 200 nm) than similarly prepared on‐chip CSA beds without the polymer entrapment. Polymer‐entrapped CSA beds also exhibited superior protein resolving power: the minimum resolvable molecular weight difference of proteins in the polymer‐entrapped CSA bed is 0.6 kDa versus ～9 kDa for the native silica CSA bed (i.e. without polymer entrapment).     

CZE study on adsorption processes of aliphatic and aromatic amines on PMMA chip

Adsorption processes on a PMMA chip linked with CZE separations of a group of 13 aliphatic and aromatic mono‐ and di‐amines were studied. Due to the lack of chromophores within aliphatic amines, contact conductivity detection implemented directly onto the chip was used for monitoring of cationic CZE separations. To prevent an adsorption of studied amines to the chip channels, the surface of PMMA chip was modified by dynamic coating. Different surface modifiers, such as aliphatic oligoamines (diethylenetriamine and triethylenetetramine), were added to the BGE solutions filling the chip channels. The effect of various concentrations of surface modifiers on peak profiles and separation parameters of amines was monitored. Of these, mainly, aliphatic di‐amines and aromatic mono‐amines adversely affected the CZE resolution of a whole group of analytes by their strong adsorption to the chip channels. A propionate BGE with pH 3.2 containing 100 μM triethylenetetramine and 25 mM 18‐crown‐6‐ether was found suitable for CZE resolution of 12 from a total of 13 amines studied. Simple dynamic modification of the surface of PMMA chip enabled fast (analysis time lasted 9 min), sensitive (sub‐μM LODs reached) and reproducible (1–3% RSD of the peak areas) CZE analysis of the aliphatic and aromatic amines.     

Selective Determination of Harmol by Room-Temperature Phosphorimetry: A Comparative Performance with Micellar Electrokinetic Capillary Chromatography

Abstract

Selective determination of harmol in the presence of other β-carboline alkaloids without the need for previous separation of components was achieved by Solid Surface Room-Temperature Phosphorimetry (SSRTP) using HgCl₂. Detection of harmol at concentrations as low as 5.2 × 10^?7 mol L^?1 can be made in urine samples. Recovery of 100±12% was achieved. The analytical performance of SSRTP was compared to Micellar Electrokinetic Capillary Chromatography (MECC).     

Separation and Removal of Mercury(II) from Water Samples Using (Acetylacetone)‐2‐Thiol‐Phenyleneimine Immobilized on Anion‐Exchange Resin Prior to Determination by Cold Vapor Inductively Coupled Plasma Atomic Emission Spectroscopy

Abstract

(Acetylacetone)‐2‐thiol‐phenyleneimine (H₂L) immobilized on an anion‐exchange resin (Dowex) was used for separation and removal of mercury from natural water samples and for preconcentration prior to its determination by cold vapor inductively coupled plasma atomic emission spectroscopy. The metal was eluted from the column using a solution of 10% thiourea in 0.1 M HCl. The modified resin is higly selective with an exchange capacity of 1.60 mmol g^?1. Various parameters like pH, column flow rate, and desorbing agents are optimized. The proposed method has a linear calibration range of 15–1000 ng/ml Hg(II), with a relative standard deviation at the 15 ng/ml level of 3.5%. The precision of the method (evaluated as the relative standard deviation obtained after analyzing six series of five replicates) was ±4.2% at the 50 ng/ml level of Hg(II). The method has been used for routine determination of trace levels of mercury species in natural waters. The potential application of modified resin for the removal of mercury(II) from two natural water samples (top water and lake water) spiked with 50 ng/ml of mercury (II) was studied by ICP‐AES, and the results proved that excellent percent extraction of mercury(II) from both natural water samples was obtained by column method using modified resin.     

Fabrication of Porous Pseudo-Carbon Paste Electrode as a Novel High-Sensitive Electrochemical Biosensor

Abstract

Porous pseudo-carbon paste electrode (PPCPE) as a novel high-sensitive electrochemical biosensor was fabricated by mixing polymethyl methacrylate (PMMA) microspheres for use as the template, graphite powders for the filler, and pyrrole as the precursor of the polymer which acted as the paste. After the polymerization of pyrrole catalyzed by Fe³⁺, the PMMA microspheres were removed to form PPCPE. The pore size was determined by SEM observations, with diameters ranging from 2 to 5 µm. The anodic stripping voltammetry response of DNA indicated that the adsorption of oligonucleotide on PPCPE was enhanced. The PPCPE was easy to preserve and had a good reusability in comparison with that of a pure carbon paste electrode (CPE) and a carbon nanotube-modified carbon paste electrode (CNTPE). The detection limits of guanine and adenine were 20 nM and 8 nM, respectively.     

A Rotary Polydimethylsiloxane‐Based Device for Polymerase Chain Reaction

Abstract

A novel rotary channel polymerase chain reaction (PCR) microchip with polydimethylsiloxane (PDMS) is developed in our laboratory. The chip circular platinum thin‐film heaters and thermometers. Compared with other continuous‐flow PCR chips, the novel rotary channel and the circular heating arrangements in this chip make the loaded reagent mixture pass through three constant‐temperature zones in a very direct sequence, which avoids a melted sample's subjection to the extension temperature before reaching the annealing zone and improves the PCR yield effectively. Several experiments are performed to verify the ability of the device. The results show that the device achieves 25 cycles in 35 min with flow rate 3 µl/min compared to about 45 min in a standard batch PCR system.     

Radiochemical studies relevant to the separation of 68Ga and 68Ge

The radiochemical separation of radiogallium from radiogermanium was studied using ion-exchange chromatography (Amberlite IR-120) and solvent extraction (Aliquat 336 in o-xylene). Both Amberlite IR-120 and Aliquat 336 in o-xylene have been used for the first time in separations involving radiogallium and radiogermanium. For tracer studies the radionuclides ⁶⁸Ge (t _1/2 = 270.8 days), ⁶⁹Ge (t _1/2 = 39 h) and ⁶⁷Ga (t _1/2 = 78.3 h) were used. They were produced by the nuclear reactions ^natGa(p,xn)^68,69Ge and ^natZn(p,xn)⁶⁷Ga, respectively, and separated from their target materials in no-carrier-added form. Several factors affecting the separation of radiogallium from radiogermanium were studied and for each procedure the optimum conditions were determined. The solvent extraction using Aliquat 336 was found to be better. The separation yield of radiogallium was >95%, the time of separation short, the contamination from radiogermanium <0.008% and the final product was obtained in 0.5 M KOH. This method was adapted to the separation of n.c.a. ⁶⁸Ga from its parent n.c.a. ⁶⁸Ge. The quality of the product thus obtained is discussed.     

Rapid Analysis of Nitrate and Nitrite by Ion-Interaction Chromatography on a Monolithic Column

Ion-interaction chromatography with direct conductivity detection has been used for analysis of nitrate and nitrite. Chromatographic separation was performed on a monolithic silica-based C₁₈ column dynamically modified with tetrabutylammonium (TBA⁺). Using the optimized mobile phase, containing 2.0 mmol L^?1 TBA⁺ and 0.8 mmol L^?1 citrate (pH 6.0), delivered at a flow rate of 6.0 mL min^?1, separation of five anions (chloride, nitrite, bromide, nitrate, and sulfate) was achieved in only 40 s at a column temperature of 30 °C. The detection limits for nitrate and nitrite were 0.74 and 0.92 mg L^?1, respectively. The relative standard deviation (RSD, n = 5) of the retention times of nitrate and nitrite was 0.1% and RSD of chromatographic peak areas were 0.4 and 0.2%, respectively. The method was successfully used for analysis of the anions in groundwater. Recovery of nitrate and nitrite was 99.1 and 105%, respectively.     

Zinc(II) complexes containing N′-aromatic group substituted N,N′,N-bis((1H-pyrazol-1-yl)methyl)amines: Synthesis,characterization, and polymerizations of methyl methacrylate and rac-lactide

A novel series of Zn(II) complexes [L_nZnCl₂] (L_n = L_A ? L_F) based on N,N′,N-bis((1H-pyrazol-1-yl)methyl)amine bidentate ligands, N,N-bis((1H-pyrazol-1-yl)methyl)-3,5-dimethylaniline [L_A], N,N-bis((1H-pyrazol-1-yl)methyl)-2,6-dimethylaniline [L_B], N,N-bis((1H-pyrazol-1-yl)methyl)-2,6-diethylaniline [L_C], N,N-bis((1H-pyrazol-1-yl)methyl)-2,6-diisopropylaniline [L_D], N,N-bis((1H-pyrazol-1-yl)methyl)-4-bromoaniline [L_E] and N,N-bis((1H-pyrazol-1-yl)methyl)benzhydrylamine [L_F], has been synthesized and characterized. X-ray structures of these Zn(II) complexes showed a distorted tetrahedral geometry. No interaction exists between the N_amine and the Zn(II) center in the [L_nZnCl₂] (L_n = L_A ? L_F) complexes, resulting in formation of an eight-membered chelate ring. [L_FZnCl₂] exhibited the highest catalytic activity (3.95 × 10⁴ g PMMA/mol·Zn·h) for the polymerization of methyl methacrylate (MMA) in the presence of modified methylaluminoxane (MMAO) at 60 °C and yielded high molecular weight (M_w) (11.0 × 10⁵ g/mol) of poly(methylmethacrylate) (PMMA). All the complexes resulted in syndiotactic enriched PMMA with high T_g (125–131 °C). The steric bulk of ligand architecture plays an influential role in controlling the catalytic activity and stereoregularity of the resultant PMMA. Further, alkyl derivatives [L_nZnMe₂] (L_n = L_A ? L_F) of synthesized Zn(II) complexes, generated in situ, showed moderate to high activities toward ring opening polymerization (ROP) of rac-lactide (rac-LA) and yielded heterotactic polylactide (PLA) with P_r up to 0.95 at ?50 °C. The activity and stereoselectivity toward ROP of rac-LA by these dimethyl Zn(II) complexes should be considered as a combined effect of steric hindrance and electronic density around the metal center.     

Octadecyl Bonded Silica Membrane Disk Modified with Cyanex302 for Preconcentration and Determination of Traces of Cobalt in Urine by Flame Atomic Absorption Spectrometry

Abstract

Octadecyl bonded silica membrane disk was impregnated with Cyanex302 for flame atomic absorption spectrometric determination of traces of cobalt(II) in urine. The solid phase extraction method developed using the modified disk was systematically investigated for sorption-desorption of cobalt(II). Cobalt(II) was quantitatively sorbed on the disk at pH 6.0 and eluted using 15 cm³ of 1 × 10^?3 M HCl. The lower limit of detection for cobalt(II) was 1.5 µg dm^?3 and the preconcentration factor 133 with a precision in terms of relative standard deviation (% R. S. D.) 0.6. The reusability of the modified disk was ≥35 cycles.     

Preconcentration of Trace Cadmium (II) and Copper (II) in Environmental Water Using a Column Packed with Modified Silica Gel-Chitosan Prior to Flame Atomic Absorption Spectrometry Determination

A new column loaded with modified silica gel-chitosan is proposed as a preconcentration system for adsorption of trace cadmium (II) and copper (II). The optimization steps were performed under dynamic conditions, involving pH, sample flow rate, eluent selection, concentration, volume, and flow rate. Trace Cd(II) and Cu(II) were quantitatively adsorbed by the modified silica gel-chitosan. The metal ions adsorbed on the separation column were eluted with 0.1 M HNO₃ and determined by flame atomic absorption spectrometry. Under the optimum conditions, this method allowed the determination of cadmium and copper with limits of detection (LOD) of 20 ng L^?1 and 38 ng L^?1, respectively. The relative standard deviation values (RSDs) for 1.0 mg L^?1 of cadmium and 1.0 mg L^?1 of copper were 2.62% and 2.85%, respectively.     

Pre-Column Derivatization HPLC Procedure for the Quantitation of Aluminium Chlorohydrate in Antiperspirant Creams Using Quercetin as Chromogenic Reagent

This article describes the development and validation of a selective high-performance liquid chromatography method that allows, after liquid–liquid extraction and pre-column derivatization reaction with quercetin, the quantification of aluminium chlorohydrate in antiperspirant creams. Chromatographic separation was achieved on an XTerra MS C18 analytical column (150 × 3.0 mm i.d., particle size 5 μm) using a mobile phase of acetonitrile:water (15:85, v/v) containing 0.08 % trifluoroacetic acid at a flow rate of 0.30 mL min^?1. Ultraviolet spectrophotometric detection at 415 nm was used. The assay was linear over a concentration range of 3.7–30.6 μg mL^?1 for aluminium with a limit of quantitation of 3.74 μg mL^?1. Quality control samples (4.4, 17.1 and 30.6 μg mL^?1) in five replicates from five different runs of analysis demonstrated intra-assay precision (% coefficient of variation <3.8 %), inter-assay precision (% coefficient of variation <5.4 %) and an overall accuracy (% recovery) between 96 and 101 %. The method was used to quantify aluminium in antiperspirant creams containing 11.0, 13.0 and 16.0 % (w/w) aluminium chlorohydrate, respectively.