Effect of Electrode Material on Electrodeposition of Tungsten Oxide

Influence exerted by the nature of an electrode-substrate on the electrochemical deposition of tungsten oxides from a metastable acid solution of isopolytungstate was studied. As substrates for obtaining tungsten oxide deposits served metallic electrodes made of gold and platinum, films of mixed indium-tin oxide on glass (ITO-electrodes) and also glassy carbon electrodes and glassy carbon electrodes coated with films of conducting polymers: polyaniline, polypyrrole, and poly-3,4-ethylenedioxythiophene. It was shown that the nature of a substrate noticeably affects the electrochemical properties of tungsten oxide deposits. These differences are attributed to the adsorption of hydrogen on platinum in the range of the deposition potentials of tungsten oxide and to the chemical interaction of polytungstate ions with the thiophene sulfur of the polymer.

     

A hydrodynamic voltammetric study of the ferricyanide/ferrocyanide system with convective electrodes of platinum,gold, glassy carbon,carbon film,and boron carbide

Hydrodynamic voltammetry employing empirically determined mass transport coefficients is used to determine heterogeneous rate constants and transport coefficients for the ferricyanide/ferrocyanide system in 0.1 M phosphate buffer and other supporting electrolytes with turbulent tubular and rotated disk electrodes of platinum, gold, glassy carbon, carbon film, and boron carbide. Different kinetic parameters are obtained at the various electrode materials. For the platinum, gold, and boron carbide electrodes, the magnitudes of the rate parameters depend on scan direction. The nature of this hysteresis varies with the electrode material and is explained in terms of adsorbed oxide and ionic layers or other phenomena not described by simple double layer theory.     

Electrochemical Detection of As(III) via Iodine Electrogenerated at Platinum,Gold, Diamond or Carbon‐Based Electrodes

The reaction of iodine, electrogenerated from iodide, is used for the detection of As(III) via electrocatalytic reaction in the diffusion layer of a boron‐doped diamond electrode. The merits of this electrode material for this purpose (over platinum, gold or glassy carbon) are demonstrated and the kinetics of the reaction between I₂ and As(III) in acid reported.     

Flow potentiometric and constant-current stripping analysis for mercury(II) with gold,platinum and carbon fibre working electrodes : Application to the Analysis of Tap Water

Gold, platinum and carbon fibres with 10-μm diameter were mounted in PVC tubes and used as flow sensors in computerized potentiometric and constant-current stripping analysis for mercury, after electroplating ofa gold film onto the fibre surfaces. Compared to gold and glassy carbon disc electrodes, the fibre electrodes gare increased sensitivity and stability and were considerably simpler to handle. The gold-coated carbon fibre electrode gave a higher background than the gold fibre electrode, in both the potentiometric and constant-current stripping modes. Mercury(II) could be determined in presence of a 10⁵-fold (molar) amount of copper(II) by constant-current stripping in media with chloride concentrations below 0.05 M. The detection limit for mercury(II) after 10 min of electrolysis was 45 ng l^?1 at the 3 σ level.     

Determination of mercury in air by means of computerized flow constant-current stripping analysis with a gold fibre electrode

Mercury in air was determined after collection in potassium permanganate or sodium carbonate solution. The mercury concentration in these solutions was determined in a computerized flow potentiometric stripping analyzer with a 10-μm gold fibre working electrode, a glassy carbon reference electrode and a platinum counter electrode. After sample electrolysis for 1–10 min, stripping was done in a 1 mg l^?1 gold(III) solution in 0.01 M nitric acid/0.01 M sodium nitrate with a constant stripping current of 0.50 μA. Results obtained for flue gas samples were in good agreement with results from cold-vapor atomic absorption spectrometry.     

A Novel Amperometric Immunosensor for Phytohormone Abscisic Acid Based on In Situ Chemical Reductive Growth of Gold Nanoparticles on Glassy Carbon Electrode

Abstract

An amperometric immunosensor for phytohormone abscisic acid was developed based on in situ chemical reductive growth of gold nanoparticles on glassy carbon electrode. First, an approximate 10 nm gold layer was sputtered uniformly onto the electrode surface, and then gold nanoparticles were grown directly on the gold layer for antibody adsorption by immersing the electrode into the H₂AuCl₄ solution. Determination was based on an enzyme-linked competitive immunoreaction between free and enzyme-labeled abscisic acid to bind on immobilized antibody on electrode. The linear response was from 10 ng/ml to 10 µg/ml with a detection limit of 5 ng/ml.     

Amperometric immunoassay for the tumor marker neuron-specific enolase using a glassy carbon electrode modified with a nanocomposite consisting of polyresorcinol and of gold and platinum nanoparticles

Microchimica Acta - A glassy carbon electrode was modified with a redox-active nanocomposite consisting of polyresorcinol, gold nanoparticles (NPs) and platinum NPs. This nanocomposite possesses...     

The effect of electrochemically treated glassy carbon on the activity of supported Pt catalyst in methanol oxidation

Effect of electrochemical oxidation of glassy carbon on deposition of platinum particles and electrocatalytic activity of platinum supported on oxidized glassy carbon (Pt/GC_OX) were studied for methanol oxidation in H₂SO₄ solution. Platinum was potentiostatically deposited from H₂SO₄ + H₂PtCl₆ solution. Glassy carbon was anodically polarised in 0.5 M H₂SO₄ at 2.25 V vs. saturated calomel electrode (SCE) during 35 s. Electrochemical treatment of GC support, affecting not significantly the real Pt surface area, leads to a better distribution of platinum on the substrate and has remarkable effect on the activity. The activity of the Pt/GC_OX electrode for methanol oxidation is larger than polycrystalline Pt and for more than one order of magnitude larger than Pt/GC electrode. This increase in activity indicates the pronounced role of organic residues of GC support on the properties of Pt particles deposited on glassy carbon.     

Integration of microchip electrophoresis with electrochemical detection using an epoxy-based molding method to embed multiple electrode materials

This paper describes the use of epoxy-encapsulated electrodes to integrate microchip-based electrophoresis with electrochemical detection. Devices with various electrode combinations can easily be developed. This includes a palladium decoupler with a downstream working electrode material of either gold, mercury/gold, platinum, glassy carbon, or a carbon fiber bundle. Additional device components such as the platinum wires for the electrophoresis separation and the counter electrode for detection can also be integrated into the epoxy base. The effect of the decoupler configuration was studied in terms of the separation performance, detector noise, and the ability to analyze samples of a high ionic strength. The ability of both glassy carbon and carbon fiber bundle electrodes to analyze a complex mixture was demonstrated. It was also shown that a PDMS-based valving microchip can be used along with the epoxy-embedded electrodes to integrate microdialysis sampling with microchip electrophoresis and electrochemical detection, with the microdialysis tubing also being embedded in the epoxy substrate. This approach enables one to vary the detection electrode material as desired in a manner where the electrodes can be polished and modified as is done with electrochemical flow cells used in liquid chromatography.     

Voltammetric oxidation of acetophenone derivatives and benzophenone in acetonitrile on a platinum and glassy carbon electrode

The voltammetric oxidation of five para-substituted acetophenone derivatives (containing nitro, chloro, bromo, methyl and hydroxyl groups as substituents) and that of benzophenone was studied on a platinum and glassy carbon electrode in acetonitrile media. Electrode passivation was observed in the case when all selected compounds are on a glassy carbon electrode; an oxidation peak appeared between 2.5 and 3 V. The voltammograms of 4′-hydroxyacetophenone showed an additional peak around 2 V, which may be associated with the oxidation of the phenol moiety. In the case of a platinum electrode, no relevant peaks appeared on the voltammograms, reflecting the absence of passivation. The use of a redox probe 1,4-dihydroxybenzene showed that the glassy carbon electrode, after cyclization in the solutions of the outlined compounds, has higher sensitivity towards the oxidation product (1,4-benzoquinone) of this compound.     

Simultaneous determination of mercury(II), copper(II) and bismuth(III) in urine by flow constant-current stripping analysis with a gold fibre electrode

Urine samples are treated with concentrated nitric acid and potassium permanganate ar 70°C for 10 min prior to injection. The flow electrode system consists of a 10-μm diameter gold fibre working electrode, a glassy carbon reference electrode and a platinum counter electrode. In the fully automated constant-current stripping procedure, the gold fibre is first covered with a fresh gold film after which the sample is electrolyzed for 1 min prior to stripping in 0.1 M hydrochloric acid with a current of 0.1μA. The procedure is repeated on a spiked sample after which the sample analyte concentrations are evaluated and presented digitally and graphically on a printer/plotter. The results obtained for bismuth, copper and mercury in a urine reference sample were 36.9, 39.7 and 47.7 μg l^?1 with standard deviations (n=10) of 3.2, 4.2 and 2.1, respectively. The certified values for copper and mercury were 45 and 51 μg l^?1; no certified value was available for bismuth.     

Voltammetric Oxidation of Drugs of Abuse II. Codeine and Metabolites

The oxidation of codeine on glassy carbon electrodes has been studied in detail using differential pulse voltammetry. The results obtained using a glassy carbon electrode clearly show a much more complex oxidation mechanism than that previously reported when platinum and gold electrodes were used. To clarify the codeine oxidative profile, several metabolites and analogues of this alkaloid, codeine N‐oxide, norcodeine, dihydrocodeine, acetylcodeine and 6‐chlorodesoxycodeine, were synthesized and studied. It was deduced that the anodic waves observed in codeine oxidation are related to the presence of methoxy, hydroxy and tertiary amine groups. Due to the similarity of potentials at which these oxidative processes take place, at some pHs an overlap of peaks occurs and only one anodic wave is observed.     

Selective Electrochemical Determination of Salicylic Acid in Wheat Using Molecular Imprinted Polymers

Salicylic acid is a phytohormone, playing crucial roles in signal transduction, crop growth, and development, and defense to environmental challenges. In this study, a highly selective electrochemical sensor was designed and used to determine salicylic acid using molecularly imprinted polymers for recognition. The electrochemical sensor was fabricated via stepwise modification of gold nanoparticle–graphene–chitosan and molecularly imprinted polymers on a glassy carbon electrode. With electrochemical deposition, a gold nanoparticle–graphene–chitosan film was deposited on the glassy carbon electrode and enhanced the sensitivity. Molecularly imprinted polymers with adsorbed template salicylic acid were added to the surface of the modified electrode. Cyclic voltammetry and electrochemical impedance spectroscopy were used to characterize the modified electrodes. Salicylic acid in wheat was quantified by the sensor using the molecularly imprinted polymer/gold nanoparticle–graphene–chitosan/glassy carbon electrode. Concentrations of salicylic acid from 5?×?10^?10 to 5?×?10^?5?mol?L^?1 were determined showing that the developed sensor was suitable for the analysis of food.     

Electrochemical oxidation of benzaldehyde and hydroxybenzaldehydes in acetonitrile on platinum and glassy carbon electrodes

The electrochemical oxidation of benzaldehyde and four hydroxybenzaldehydes was studied on platinum and glassy carbon electrodes in acetonitrile. A considerable difference was observed in electrooxidation performed on platinum and glassy carbon electrodes. All hydroxy derivatives fouled the glassy carbon electrode, but platinum was passivated only by the electrooxidation of 3-hydroxybenzaldehyde, highlighting the crucial role of the position of the substituent relative to the hydroxy group. On the glassy carbon electrode, the formation of the corresponding benzoyl radical could have taken place, which promoted the buildup of polymers on the electrode surface.     

Highly Sensitive and Selective Determination of Dopamine in the Presence of Ascorbic Acid Using Pt@Au/MWNTs Modified Electrode

Nanoparticles containing platinum and gold supported on MWNTs (Pt@Au/MWNTs) were successfully prepared by successive reduction. A novel sensor was fabricated with Pt@Au/MWNTs nanocomposite modified glassy carbon electrode coating with nafion. Compared with the previous reports, the electrode exhibited greatly improved performance towards the oxidation and determination of dopamine in the presence of ascorbic acid. A higher sensitivity of 1.16 mA cm^?2 mM^?1 with a wider linear concentration range of dopamine up to 120 μM and a low detection limit of 8.0×10^?8 M were obtained in neutral solution. Moreover, the modified electrode presented high stability and reproducibility. The interference of ascorbic acid can be eliminated effectively. The present work provides a simple and practical approach to selective detection of dopamine in the presence of ascorbic acid.     

Preparation of Platinum Implanted Glassy Carbon Electrode and Electro-oxidation of Formic Acid and Formaldehyde

Electrocatalytic oxidation of small organic molecules has attracted considerable at-tentionin system of fuel celll-4. In this research field, Parsons4 pointed out that the electrodeswhich were prepared from non-noble substrates modified by excellent dispersal noblemetal particles and which still exhibited better catalytic activity should be studied. Ionimplantation is a technique with unique advantage and has been used in manyelectrochemical research fieldss'6. The present study is an at-tempt…     

Modified Glassy Carbon Rotating Disk Electrode for Determination of Heterogeneous Reaction Rate Constant of H2O2 Decomposition

Modified glassy carbon RDE method is introduced in this work for the determination of heterogeneous reaction rate constant of H₂O₂ decomposition. This method is based on the analysis of RDE voltammograms of H₂O₂ reduction on a glassy carbon electrode covered with a catalyst layer. As a case study, the rate constant of H₂O₂ decomposition on nitrogen doped graphene is determined by using both glassy carbon and gold RDE methods. A good agreement is observed between the results of these two methods indicating the reliability of the glassy carbon method. Moreover, advantages and limitations of the glassy carbon method are discussed.     

Standard rate constants of charge transfer of Nb(V)/Nb(IV) redox pair in equimolar NaCl-KCl melt

Standard rate constants of charge transfer (k _s) on platinum and glassy carbon electrodes for Nb(V)/Nb(IV) redox pair in the NaCl-KCl-K₂NbF₇ melt are determined using the method of cyclic voltammetry in the temperature range of 973 to 1123 K. It is found that k _s increases with increasing temperature and when we pass from glassy carbon to platinum electrode. The “apparent” activation energies of charge transfer are determined; it is shown that the charge transfer between the Nb(V) and Nb(IV) complexes is quasi-reversible and is controlled predominantly by the diffusion.     

Conical tungsten tips as substrates for the preparation of ultramicroelectrodes

Here we describe a simple method to prepare voltammetric microelectrodes using tungsten wires as a substrate. Tungsten wires have a high tensile modulus and enable the fabrication of electrodes that have small dimensions overall while retaining rigidity. In this work, 125 microm tungsten wires with a conical tip were employed. For the preparation of gold or platinum ultramicroelectrodes, commercial tungsten microelectrodes, completely insulated except at the tip, were used as substrates. Following removal of oxides from the exposed tungsten, platinum or gold was electroplated, yielding surfaces with an electroactive area of between 1 x 10-6 and 2 x 10-6 cm2. Carbon surfaces on the etched tip of tungsten microwires were prepared by coating with photoresist followed by pyrolysis. The entire electrode was then insulated with Epoxylite except the tip, yielding an exposed carbon surface with an area of around 4 x 10-6 to 6 x 10-6 cm2. All three types of ultramicroelectrodes fabricated on the tungsten wire had similar electrochemical behavior to electrodes fabricated from wires or fibers insulated with glass tubes.     

Determination of Ionol by Voltammetry and Coulometric Titration

Procedures were developed for determining ionol by voltammetry and by coulometric titration with electrogenerated chlorine using the amperometric indication of the titration end point. Possible mechanisms of ionol oxidation with electrogenerated chlorine and its electrochemical oxidation at a glassy carbon and a gold electrode were discussed. Procedures were developed for determining ionol in mineral oil in analytical ranges from 1.0 × 10^–4 to 1.0 × 10^–2 M (RSD = 9%) and from 3.0 × 10^–5 to 4.0 × 10^–3 M (RSD = 9%) using a glassy carbon and a gold electrode, respectively. The detection limits for ionol at the glassy carbon and gold electrode were 2.8 × 10^–4 and 1.0 × 10^–5 M, respectively. The detection limit in coulometric titration was 20 g/mL.