A Flow Injection Chemiluminescence Method for the Determination of Protein Using Copper(II)-Alizarin Red S Complex as an Efficient Chemiluminescent Probe

A sensitive flow injection chemiluminescence (CL) method is proposed for the determination of bovine serum albumin (BSA) using Copper(II)-Alizarin Red S (ARS) complex as an efficient chemiluminescent probe. The detection is based on the binding of the copper(II)-ARS complex to proteins and the catalytic activity of copper(II)-ARS in the luminol-H₂O₂ CL system. Under the selected conditions, the CL intensity is linear with the concentration of BSA in the range of 5.0 × 10^?11 to 1.0 × 10^?9 mol · L^?1. The detection limit was 2.0 × 10^?11 mol · L^?1. The method is successfully applied to the determination of protein in urine.     

Chemiluminescent Determination of Vitamin B12 Using Charge Coupled Device (CCD)

A method was developed for the determination of vitamin B₁₂ based on the enhancement of cobalt (II) on the chemiluminescence (CL) reaction between luminol and percarbonate (powerful source of hydrogen peroxide). The release of cobalt (II) from the vitamin B₁₂ was reached by a simple and fast microwave digestion (20 s microwave digestion time and a mix of nitric acid and hydrogen peroxide). A charge coupled device (CCD) photodetector, directly connected to the cell, coupled with a simple continuous flow system was used to obtain the full spectral characteristics of cobalt (II) catalyzed luminol-percarbonate reaction.

The optima experimental conditions were established: 8.0 m mol L^?1 luminol in a 0.075 mol L^?1 carbonate buffer (pH 10.0) and 0.15 mol L^?1 sodium percarbonate, in addition to others experimental parameters as 0.33 mL s^?1 flow rate and 2 s integration time, were the experimental conditions which proportionate the optimum CL emission intensity. The emission data were best fitted with a second-order calibration graph over the cobalt (II) concentration range from 4.00 to 300 µ g L^?1 (r² = 0.9990), with a detection limit of 0.42 µ g L^?1. The proposed method was successfully applied to the determination of vitamin B₁₂ in pharmaceuticals.     

Temperature-assisted ionic liquid-based dispersive liquid–liquid microextraction with following back-extraction for HPLC/UV–Vis determination of 3-indole acetic acid in pea plants

In this work, the ionic liquid (IL)[C₆mim][PF₆] was used as IL-based extractant for dispersive liquid–liquid microextraction, followed by back-extraction and HPLC/UV–Vis determination of 3-indole acetic acid (IAA) in pea plant. The effects of some crucial factors such as chemical structure and volume of IL, pH adjustment, dissolution temperature, extraction time, centrifugation time, and ionic strength of aqueous sample were studied. The linear range of the HPLC method for IAA quantification was 17.5 × 10^?2–36.8 mg L^?1. LOD, LOQ, method recovery, and preconcentration factor values were 0.170 mg L^?1, 0.175 mg L^?1, 98.3, and 40 %, respectively. The RSD for the suggested method was calculated as 0.93 % at 35.04 mg L^?1 of IAA and each IL phase was able to be reused for at least four DLLME/back-extraction cycles. To evaluate the applicability of the suggested method, IAA was determined in pea plant samples.     

Determination of formaldehyde based on the enhancement of the chemiluminescence produced by CdTe quantum dots and hydrogen peroxide

Water-soluble cadmium telluride quantum dots (CdTe QDs) capped with glutathione (GSH) display chemiluminescence (CL) emission on reaction with hydrogen peroxide (H₂O₂) in strongly alkaline medium. It is found that the CL is strongly enhanced on addition of formaldehyde in aqueous solution. A flow injection system was developed, and it is shown that there is good linearity between CL intensity and the concentration of formaldehyde in the 0.06–3.0 μg L^?1 range. The limit of detection is as low as 10 ng L^?1. The method was successfully applied to the determination of formaldehyde in indoor air after adsorption into an aqueous phase. The recoveries for the real samples range from 97 % to 102.5 %, and the relative standard deviation is <3.8 % for intra- and inter-assay precision.

Detection of trace nitrite in waters using a QDs-based chemiluminescence analysis system

In the present work, a novel flow-injection chemiluminescence method based on CdTe quantum dots (QDs) was developed for the determination of nitrite. Weak chemiluminescence (CL) signals were observed from a CdTe QDs–H₂O₂ system under basic conditions. The addition of a trace amount of hemoglobin (Hb) caused the CL from the CdTe QDs–H₂O₂ system to increase substantially. In the presence of nitrite, the ferrous Hb reacted with the nitrate to form ferric Hb and NO. The NO then bound to ferrous Hb to generate iron nitrosyl Hb. As a result, the CL signal from the CdTe QDs–H₂O₂–Hb system was quenched. Thus, a flow-injection CL analytical system for the determination of trace nitrite was established. Under optimum conditions, there was a good linear relationship between CL intensity and the concentration of nitrite in the range 1.0?×?10^?9 to 8.0?×?10^?7 mol L^?1 (R ²?=?0.9957). The limit of detection for nitrite using this system was 3.0?×?10^?10 mol L^?1 (S/N?=?3). This method was successfully applied to detect nitrite in water samples.

Determination of Monobromobimane-Labeled Phytochelatins by High-Performance Liquid Chromatography

A new method for phytochelatins by high-performance liquid chromatography (HPLC) was developed based on a condensation reaction with monobromobimane to produce fluorescent derivatives. Glutathione, H-(γ-glutamic acid-cysteine)₂-glycine-OH, H-(γ-glutamic acid-cysteine)₃-glycine-OH, H-(γ-glutamic acid-cysteine)₄-glycine-OH, H-(γ-glutamic acid-cysteine)₅-glycine-OH, and H-(γ-glutamic acid-cysteine)₆-glycine-OH were well separated, with retention times between 14.68 and 22.0 min. The HPLC method had good linearity (r < 0.9991) between 0.1 mg L^?1 and 100 mg L^?1. The limits of quantification for the analytes (S/N = 3) were 0.08, 0.3, 0.05, 0.3, 0.5, and 0.8 mg L^?1, respectively. The recoveries were between 83.0% and 101.33% with relative standard deviations less than 2%. The reported method is simple, accurate, and suitable for the determination of phytochelatins.     

The Determination of Perphenazine by a New Simple Flow‐Injection Chemiluminescence Method

Abstract

A rapid and simple flow‐injection chemiluminescence (CL) method is described for the determination of perphenazine, which is based on the CL intensity that generated from the redox reaction of Ce (IV)-perphenazine in HNO₃ medium is proportional to the perphenazine concentration without any sensitizers. The proposed method allows the determination range within 1.0×10^?7–7.0 ×10^?5 g mL^?1 with a detection limit of 8.0×10^?8 g mL^?1, and it has been successfully applied to the determination of the perphenazine in pharmaceutical tablet compared well with the official method.     

Determination of Sb(III) and Total Sb in Antileishmanial Drugs by Spectrophotometric Flow‐Injection Hydride Generation

Abstract

A spectrophotometric procedure based on hydride generation and flow analysis is proposed for determination of antimony (III) [Sb(III)] and total antimony (Sb) in pharmaceutical samples. Firstly, Sb(III) reacts with hydrogen species generated in the system, forming antimony hydride. The reaction leads to a decrease in the permanganate concentration and, hence, in the intensity of the color of this specie, which is spectrophotometrically measured at 528 nm. Total Sb is determined as Sb(III) after Sb(V) reduction using 0.02% (m/v) KI. Some parameters, such as the number of channels of the gas phase separator, injection volume, coil length, and KBH₄ concentration, are investigated. The system presents a frequency of ca. 100 h^?1 and precision <3.0% [expressed as relative standard deviation (RSD) of 30 measurements using a 3.0 mg L^?1 Sb(III) solution]. The analytical curve ranging from 0.5 mg L^?1 to 5.0 mg L^?1 (r>0.998; n=5) permits limit of detection (LOD) and limit of quantification (LOQ) of 83 and 250 µg L^?1. For total Sb, the accuracy is checked by atomic absorption spectrometry applying the t test and the results are in accordance at the 95% confidence level. Recovery tests are used to check the accuracy for Sb(III) determination, and the recoveries are between 95% and 105%.     

Ionic Liquid-Based Submerged Single Drop Microextraction: a New Method for the Determination of Aromatic Amines in Environmental Water Samples

A rapid and sensitive liquid chromatography–electrospray tandem mass spectrometry method, combined with solid-phase disk extraction cleanup, was developed and applied to the analysis of fifteen androgens in waste water. Compounds included androstenedione, androstanolone, boldenone, clostebol, danazol, 6-dehydronandrolone acetate, fluoxymesterone, methyltestosterone, nandrolone, nandrolone propionate, testosterone, testosterone acetate, testosterone propionate, trenbolone and trenbolone acetate, respectively. The overall method recoveries ranged from 78.0 to 107.7% and the limits of detection for the fifteen analytes determined in influent samples were between 0.5 and 4 ng L^?1. The analysis of residual androgens was carried out in waste water obtained from the Beijing area and five analytes (androstenedione, fluoxymesterone, methyltestosterone, testosterone and nandrolone) could be detected in levels ranging from 1.6–3.5, 7.6–66.7, 4.1–7.0, 1.2–4.3 and 1.7 ng L^?1, respectively.     

Preconcentration of Trace Cadmium (II) and Copper (II) in Environmental Water Using a Column Packed with Modified Silica Gel-Chitosan Prior to Flame Atomic Absorption Spectrometry Determination

A new column loaded with modified silica gel-chitosan is proposed as a preconcentration system for adsorption of trace cadmium (II) and copper (II). The optimization steps were performed under dynamic conditions, involving pH, sample flow rate, eluent selection, concentration, volume, and flow rate. Trace Cd(II) and Cu(II) were quantitatively adsorbed by the modified silica gel-chitosan. The metal ions adsorbed on the separation column were eluted with 0.1 M HNO₃ and determined by flame atomic absorption spectrometry. Under the optimum conditions, this method allowed the determination of cadmium and copper with limits of detection (LOD) of 20 ng L^?1 and 38 ng L^?1, respectively. The relative standard deviation values (RSDs) for 1.0 mg L^?1 of cadmium and 1.0 mg L^?1 of copper were 2.62% and 2.85%, respectively.     

Flow injection determination of hydrogen peroxide using diperiodatoargentate- and diperiodatonickelate-luminol chemiluminescence

A novel chemiluminescence (CL) method for the determination of hydrogen peroxide is described. Method is based on the transition metals in highest oxidation state complex, which include diperiodatoargentate (DPA) and diperiodatonickelate (DPN) and show excellent sensitisation on the luminol-H₂O₂ CL reaction with low luminol concentration in alkaline medium. In particular, the sensitiser which was previously reported (such as Co²⁺, Cu²⁺, Ni²⁺, Mn²⁺, Fe³⁺, Cr³⁺, KIO₄, K₃Fe(CN)₆ etc.) to be unobserved CL due to poor sensitisation with such low concentration of luminol which makes the method hold high selectivity. Based on this observation, the detection limits were 6.5?×?10^?9?mol?L^?1 and 1.1?×?10^?8?mol?L^?1 hydrogen peroxide for the DPN- and DPA-luminol CL systems, respectively. The relative CL intensity was linear with the hydrogen peroxide concentration in the range of 2.0?×?10^?8–6.0?×?10^?6?mol?L^?1 and 4.0?×?10^?8–4.0?×?10^?6?mol?L^?1 for the DPN- and DPA-luminol CL systems, respectively. The proposed method had good reproducibility with a relative standard deviation of 3.4% (8.0?×?10^?7?mol?L^?1, n?=?7) and 1.0% (2.0?×?10^?6?mol?L^?1, n?=?7) for the DPN- and DPA-luminol CL systems, respectively. A satisfactory result has been gained for the determination of H₂O₂ in rainwater and artificial lake water by use of the proposed method.     

A Novel Enhanced Chemiluminescence System with Ag(III) Complex for the Determination of Ofloxacin and Levofloxacin in Pharmaceutical Preparation and Biological Fluid

A novel chemiluminescence (CL) method is developed for determination of ofloxacin and levofloxacin with Ag(III) complex in H₂SO₄ solution medium. The CL intensity is proportional to drug concentration in a wider range with a correlation coefficient of 0.999. The limit of detection (s/n = 3) for ofloxacin and levofloxacin was 5.3 × 10^?9 g ml^?1 and 8.3 × 10^?9 g ml^?1, respectively, and their recoveries from urine and serum samples were in the range of 90.1–112% with the RSDs of 1.0–2.8%. The proposed method was applied for analysis of real samples with satisfactory result. The possible CL mechanism was discussed.     

In-Capillary Derivatization and Preconcentration for CE of Metal Ions as Their Phenanthroline Complexes

A simple and automated method involving in-capillary derivatization and in-capillary preconcentration was developed for the simultaneous determination of metal ions by capillary zone electrophoresis. Fe(II), Zn(II), Cu(II) and Cd(II) were derivatized using 1,10-phenanthroline as the derivatizing agent. The in-capillary derivatization and in-capillary preconcentration via large volume injection were performed sequentially as follows: 60 mmol L^?1 1,10-phenanthroline was first hydrodynamically injected (0.2 psi) for 2 s; metal ions were introduced by hydrodynamic injection (0.5 psi) for 60 s; 0.2 mol L^?1 acetate pH 5.5 containing 20 % methanol was used as the running buffer. Four metal ions can be determined within 8 min using 16 kV. The resulting preconcentration factors were in the range 12–21. Good linearity was obtained for concentrations of 0.1–8.0 mg L^?1 (r ² > 0.990). The mean recoveries of the metal ions evaluated by fortification of wine samples were in the range 90–102 %. The limits of detection ranged from 0.05 to 0.2 mg L^?1. The proposed method can be applied for directly determining metal ions in wine samples.     

Direct chemiluminescence determination of fenbufen by the enhancement of the {\text{Ru}}\left( {{\text{phen}}} \right)_3^{2 + } –cerium(IV) system

A method is described for determination of fenbufen that is based on the chemiluminescence (CL) reaction of the ${\text{Ru}}\left( {{\text{phen}}} \right)_3^{2 + } $ –cerium(IV)–fenbufen system. An enhanced CL reaction was developed, and optimum conditions for CL were investigated. The CL was linearly dependent on fenbufen concentration in the range 4.0?×?10^?8–9.0?×?10^?6 mol L^?1. The detection limit was 2.0?×?10^?8 mol L^?1. The relative standard deviation (RSD) was 2.8% for eleven measurements of 6.0?×?10^?7 mol L^?1 fenbufen standard solution. The new method enables simple, sensitive, and rapid determination of fenbufen and has been used for determination of fenbufen in pharmaceutical preparations in capsule, spiked serum and urine samples.     

Determination of Vanadium(IV) and Vanadium(V) in Benfield Samples by IEC with Conductivity Detection

In this study, the determination of vanadium valence state, V(IV) and V(V) has been achieved using ion-exchange chromatography with conductivity detector. In this method, V(IV) was determined as V(IV)-EDTA complex and V(V) as vanadate ion. Determination of V(IV) was successfully done using 3 mM carbonate/bicarbonate/EDTA at pH 8.6 as the eluent. The additive, EDTA in the mobile phase did not seem to interfere with the V(IV) analysis. The detection of V(V) was achieved with 5 mM disodium hydrogen phosphate buffer at pH 10.4. A linear calibration graph over VO₃ ^? and V(IV) with concentration ranges 5–15 mg L^?1 gave the detection limit at 0.09 and 0.1 mg L^?1, respectively. Both V(IV) and V(V) were successfully determined in Benfield sample, with concentrations of V(IV) and V(V) at 4 and 11,000 mg L^?1, respectively.     

A New Flow‐Injection Chemiluminescence Method for the Determination of Acyclovir and Gancyclovir

Abstract

A rapid and sensitive flow‐injection chemiluminescence (FI‐CL) method, which is based on the CL intensity that generated from the redox reaction of Ce(IV)‐rhodamine B in H₂SO₄ medium, for the determination of acyclovir and gancyclovir is described. For acyclovir, the determination range is 3×10^?8 g mL^?1–7×10^?5 g mL^?1, with 1.56×10^?8 g mL^?1 as its determination limit. During 11 repeated measurements for 1×10^?6 g mL^?1 acyclovir, the relative standard deviation was 2.08%. For gancyclovir, the determination range was 5×10^?8 g mL^?1–7×10^?5 g mL^?1, with 2.35×10^?8 g mL^?1 as its determination limit. The relative standard deviation is 2.83% with 11 repeated measurements of 1×10^?6 g mL^?1 gancyclovir. This method can be successfully used to determine the content of acyclovir and gancyclovir in injections, acyclovir in eye drops, and, maybe, also for other ciclovirs.     

Determination of Vitamins A and E Exploiting Cloud Point Extraction and Micellar Liquid Chromatography

Cloud point extraction and micellar chromatographic methods were developed for determination of vitamins A and E. The stationary phase was C18 and the mobile phase was 3.00% (w/v) SDS, 15.0% (v/v) butyl alcohol and 0.02 mol L^?1 phosphate buffer solution at pH 7.0. The retention times for vitamins A and E were 9.6 and 13.0, respectively. The extraction solution was 100 mmol L^?1 Triton X-100, 650 mg NaCl and 1.0% ascorbic acid at 70°C for 30 min. The method is precise (r.s.d. < 7%), the linear range was from 5.0 up to 360.0 mg L^?1 for both vitamins. Recovery test showed recuperation between 90.2 and 99.2%, and LOD and LOQ of 0.234 and 0.108 mg L^?1, 0.780 and 0.360 mg L^?1 to vitamins A and E were found.     

High-Throughput Determination of Quinine in Beverages and Soft Drinks Based on Zone-Fluidics Coupled to Monolithic Liquid Chromatography

In the present study we propose a new automated analytical scheme for the determination of quinine in soft drinks and beverages by coupling zone-fluidics (ZF) to liquid chromatography (LC). Certain pretreatment tasks involving precise liquid handling, such as sample dilution and addition of the internal standard (ISTD) were automated by ZF. After on-line filling of the loop of the LC injection valve, separation was carried out in less than 2.5 min by using a reversed phase monolithic column (100 × 4.6 mm i.d.) at a flow rate of 2 mL min^?1. The ZF and LC parts of the setup operated independently: during LC separation the next sample was treated by ZF allowing a high throughput of 24 h^?1. The proposed assay was thoroughly validated in terms of linearity (up to 150 mg L^?1), LOD (0.25 mg L^?1), LOQ (0.8 mg L^?1), precision, accuracy, and ruggedness. The ZF-LC method was successfully applied for the determination of quinine in beverages and soft-drinks.     

Ciprofloxacin and Norfloxacin Spectrophotometric Determination in a Fully Automated Multi-Pumping Flow System

A flow-based methodology for the spectrophotometric determination of ciprofloxacin and norfloxacin, based on the oxidation with N-bromosuccinimide in acidic medium, was developed. The proposed procedure was implemented in a multi-pumping flow system, which provided excellent mixing conditions due to the pulsed flow produced by solenoid micro-pumps actuation, resulting on a sensitive, simple, fast, and versatile analytical method. Linear calibration plots were obtained for ciprofloxacin and norfloxacin concentrations ranging from 5 to 70 mg L^?1 with an R.S.D < 2.2% (n = 10). Detection limits (3σ) were 0.27 mg L^?1 and 0.99 mg L^?1 for norfloxacin and ciprofloxacin, respectively.     

Liquid–liquid microextraction and spectrophotometric determination of anionic surfactants using Astra Phloxine FF

A novel and simple procedure for determination of anionic surfactants has been developed. The method is based on the reaction of sodium dodecyl sulphate (SDS) with Astra Phloxine FF reagent at pH 3–8, followed by liquid–liquid microextraction of the formed ion associate into an organic phase containing a mixture of carbon tetrachloride and dichloroethane (4:1, v/v) and subsequent UV-Vis detection at 555 nm. The calibration plot was linear in the range 0.006–0.29 mg L^?1 of SDS. The limit of detection (LOD), calculated based on 3s, is 0.002 mg L^?1. The method was applied to the determination of anionic surfactants in real wastewater samples.