Use of the Rotated Ring Disc Electrode for the Analytical Determination of Dithiaalcanediols in Aquo-Alcoholic Media and Its Rate of Oxidation with Bromine

Abstract

We used bromine generated and detected on the ring-dise electrode for the titration of aquo-alcoholic solution of dithiaalcanediol. The analysis of the ring current vs disc current curve provided a means of determination of the rate constant k of the second order homogeneous and fast reaction of bromine with each of the two sulfide groups of dithiaalcanediol. A value of (3+1)× 10^?6M^?1 _s ^?1 was found for k at 25°C.     

Arginine Determination with Ion-Selective Membrane Electrodes

Abstract

A new method for the determination of the amino acid arginine utilizes a dual enzyme catalyzed reaction monitored with an ammonium ion selective membrane electrode of the antibiotic type. The technique gives a linear correlation between arginine concentration and electrode response over the 3 × 10^?3 M to 3 × 10^?5 M range and a useful, but non-linear, response over a wider range. Major interferences are urea, K⁺, and NH₄ ⁺, but Na⁺ does not interfere in the physiological concentration range.     

Aqueous Polymerization of Methyl Methacrylate Initiated by the Potassium Bromate-Thiomalic Acid Redox System

The redox system composed of potassium bromate and thiomalic acid was used to initiate the aqueous polymerization of methyl methacrylate under nitrogen atmosphere at 35 ± 0.2°C. The initial rates of polymerization have been found to be approximately proportional to the first power of the initiator concentration in the range of 2.5 to 6.0 ± 10^?3 M and to the first power (1.15) of monomer concentration in the range of 3.72 to 11.16 ± 10^?2 M The overall rate was independent of activator concentration, approaching a maximum at 10 × 10^?3 M. The overall energy of activation was found to be 8.80 kcal/mol. The initial rate and the maximum conversion attained a maximum value at 35°C in the temperature range of 20 to 45°C.     

The Separation and Determination of Molybdenum by Electron Paramagnetic Resonance

Abstract

A procedure is described for the separation and quantitative determination of molybdenum by means of EPR. Molybdenum(VI) was precipitated from a hydrochloric acid solution (1.5 Molar) with α-benzoinoxime. The precipitate was separated by centrifugation and then the sample was dried in an oven at 105°C. Nitrogen was passed over the sample to complete the drying procedure. The precipitate was dissolved in acetonitrile which was 0.5 M in lithium perchlorate. Electrochemical reduction of the sample produced the molybdenum(V) species. The concentration of molybdenum(V) was determined directly from the intensity of the first derivative EPR signal. The range of linearity of the analytical curve was 1.00 × 10^?2 M to 1.00 × 10^?4 M, and a routine accuracy of less than 6% was obtained.     

Highly Selective Potassium Ion Responsive Liquid-Membrane Electrode

Abstract

The performance of a new liquid-membrane electrode using valinomycin as membrane component is described with respect to selectivity, working range, speed of response and accuracy. The electrode makes possible the measurement of potassium ion activities in the range of 10^?1 M to at least 10^?6 M in unbuffered systems with a selectivity of potassium over sodium ions of more than 4,000. The electrode was used for the direct titration of potassium ions.     

Use of Catecholoxygenase for Determination of Catechol

Abstract

A cell extract from Trichosporon cutaneum containing catechol 1,2-oxygenase catalyzes the oxidation of catechol to cis,cis-muconic acid. The absorbance of the cis,cis-muconic acid at 260 nm can be correlated with the initial catechol concentration in the range 5 × 10^?6 M to 5 × 10^?5 M in aqueous solutions. This enzymatic assay has been applied to the determination of catechol in aqueous samples derived from coal processing.     

Photoinduced Graft Copolymerization. V. Graft Copolymerization of Methyl Methacrylate onto Cellulose in the Presence of N-Bromosuccinimide as Initiator

Abstract

The photoinduced graft copolymerization of methyl methacrylate onto cellulose was studied using N-bromosuccinimide as the photoinitiator. The formation of graft copolymer increases with an increasing amount of cellulose. The graft copolymerization increases with increasing initiator concentration up to 1,25 × 10^?2 M and thereafter it decreases. The percentage of graft increases with increasing monomer concentration up to 46.9 × 10^?2 M and thereafter it decreases. The percentage graft-on increases with increasing temperature. The overall activation energy was computed to be 8.40 kcal/mol. The percentage graft was investigated using different water-miscible organic solvents. The graft copolymerization was also investigated using differently modified cellulose. A possible mechanism for the photo-graft copolymerization onto cellulose is suggested.     

1,4,7,10-Tetraoxacyclododecane(12-Crown-4) as Neutral Carrier for Lithium Ion in Lithium Ion Selective Electrode

Abstract

1,4,7,10-Tetraoxacyclododecane (12-crown-4) (I) and its lithium complex (II) are used as neutral carriers for lithium ion in polyvinylchloride membrane ion selective electrodes. The lithium response varies with concentration, being near Mernstian at low (10^?5-10^?4 M) concentrations and sub-Nernstian (24-28 aV) at higher concentrations (10^?3 M). The selectivity coefficients K_Li ^Pot _M for II are: Na⁺ (0.12), K⁺ (0.66), Cs⁺ (0.15), Mg²⁺ (1.6 × 10^?4), Ca²⁺ (3.1 × 10^?4), Ba²⁺ (9.5 × 10^?7), NH⁺ ₄ (9.0 × 10^?2), H⁺ (2.2).     

Preliminary Studies of a Bacterial Sulfate Electrode

Abstract

A bacterial electrode for sulfate was developed by coupling a strain of the bacterium Desulfovibrio desulfuricans with a sulfide selective electrode. This bacterium reduces sulfate to sulfide by a complex multistep enzymatic reaction sequence. The response of this sensor to sulfate is Nernstian in the concentration range of 4 × 10^?5 to 7 × 10^?4 M. The electrode functions for a period up to 10 days when stored in growth medium under a nitrogen atmosphere. However, it is necessary to keep the sensor in an oxygen-free environment at all times, because oxygen irreversibly inhibits the required enzymes. Although this limits the practical utility of this sensor, alternative configurations for a more practical analytical system are proposed.     

Extraction-Photometric Determination of Niobium(V) by Reaction with Pyrocatechol and Thenoyltrifluoracetone

Abstract

The possibility of formation of mixed complex compound niobium(V)-pyrocatechol (PC)-thenoyltrifluoracetone (TTA) has been shown. Optimum conditions for the formation of such a compound have been found (7.5 M HCI, 0.3 MTTA, 0.4 MPC) and the molar ratio Nb (V):PC:TTA=1:2:2 has been established by the equilibrium shift method. The absorption spectrum of the chloroform extract of the Nb-PC-TTA compound has a maximum at 414 nm, ε= (7.7±0.2) × 10³. The influence of other ions on extraction-photometric determination of niobium (V) with PC and TTA is discussed.     

Human Isoionic Hemoglobin: Preparation and Kinetic Properties

Abstract

Much of the data on hemoglobin-gas interactions which have accumulated in the literature is difficult to interpret because the hemoglobin preparations contained extraneous ligands and salts. In order to obtain hemoglobin which is completely free of 2, 3-DPG and other ionic substances, we have developed a method for isolating isoionic hemoglobin. These data serve as a baseline against which other data obtained with added ligands and salts can be compared.

Specifically, isoionic hemoglobin had these properties: Second-order rate constant for combination with 0₂: 2.2 × 10⁷ M^?1S^?1; p₅₀ at 20^[ddot] was 0.87mm Hg at heme concentration of 10^?4 M.     

Asymmetric Synthesis of Phosphinous Tungsten Complexes

Abstract

The asymmetric synthesis of phosphinous compounds from diheterophosphacycloal kane-1,3,2 was investigated in a transition metal complex series. Complexes 1 and 2 were prepared from diaminophosphine, (?)-ephedrine and W (CO)₅ THP (1: δ³¹ P=+147,6 ppm; J_PW=313 Hz M^.+=595;2 δ³ p=+156 ppm J_PW=304 Hz M^.+=533; 90%dp) in two steps. Methyl lithium reacted with 1 to give stereospecific 3 (83%Yield) by P-O linkage (3 δ³¹ P=+64 ppm; J_PW =261 Hz; M^.+ ? 28=583). The aminophosphine complex 3 was stereochemically stable and was used for studies of synthetic applications. HCL gas reacted with 3 in CH₂Cl₂ to give the non optically active chlorophosphine complex 4 (δ³¹ P=+103,6 ppm; J_PW=290 Hz; M^.+ =482). This compound immediately gave salt 6 (δ³¹ P=+66,7 ppm; J_PW =240 Hz) by reaction with (?)-menthol and triethylamine. The acid methanolysis of 3 gave a mixture of 5 and 6 and the unchanged (?)-ephedrine salt [5:30% yield; δ³¹ P=+114 ppm; J_pw=280 Hz; [α]_D=+1,2° (CH₂Cl₂); M^.+=478; 6 : 60% yield; δ³¹p=+102,9 ppm; J_PW=264 Hz; [α]_D =+16,9° (CH₂Cl₂); M^.+=464]. Compound 6 was thus obtained with a 80% yield and a specific rotation of + 20,2° (CH₂Cl₂) in isopropanol/H₂SO₄ 5M medium. The enantiomeric excess of 6 was determined by RMN³¹P. Acid hydrolysis of 3 or the reaction with CH₃SO₃H, gave phosphinous acid complex 6 with an optical rotation of + 4,8° or ?1,8° respectively. These results provide precious informations about the stereochemistry and reactivity of the P-N linkage in this aminophosphine transition metal series, which differs notably from that of the corresponding (PO) N bond.     

Novel Flow Injection/Potentiometric Measurement of Slightly Soluble Salts in Small Volumes: Determination of Solubility Product Constants of Some Silver Salts

Abstract

The flow injection technique is shown to provide fast, reliable and sensitive determination of solubility product constants of silver acetate, silver sulfate, silver oxide, silver bromate and silver chloride in microliter volume samples. Potentiometric detection using electrodes of the first kind and second kind was used for measuring silver ions and chloride ions, respectively. The solubilities were determined from measurement of the silver ion concentration in the saturated solutions. In the case of silver chloride, the solubility product constant was calculated from the concentrations corresponding to the intersection of the silver ion calibration curve and the chloride ion calibration curve, i.e., where the potentials of the two electrodes are equal. Tenth-molar sodium nitrate was used for all solutions to maintain constant ionic strength. At a concentration range of 1.00 × 10^?2 ? 1.00 × 10^?5 M silver, and 1.00 × 10^?2 ? 1.00 × 10^?4 M chloride, a Nernstian response of 60 m V per decade was obtained. At a sampling rate of 50–70 samples per hour, with 50 μl sample injections, high reproducibility of measurements was achieved, with a -pL 2% relative standard deviation in measured concentrations. The scope and applications of this system are discussed.     

The structure of cis and trans lsomers of 1-(p-Bromobenzylidene)-2-indanone

Abstract

In this communication we wish to report an interesting case of the isolation and characterization of the cis and trans isomers of 1-(p-bromobenzylidene)-2-indanone and their ketals. Prior to this work, Hoogstreen and Trenner² had reported on the cis and trans isomers of 1-(p-chlorobenzylidene)-2-methyl-5-methoxyindenylacetic acid. The condensation of 2-(N-morpholinyl)-indene (1, prepared by the reaction of 2-indanone³ and morpholine) with P-bromobenzaldehyde was conducted by refluxing them in the presence of acetic acid for 4 hours. Acid hydrolysis of the reaction mixture followed by dry column chrcmatography over sillica gel using a fraction collector afforded two iscmeric monobenzylidenes, compounds 2(36.6%, mp 110–111°)and 3(1.3%, mp 115–116°) and a dibenylidene, compound 4 (8.7%, mp 205°). The relative rations of the mono- and dibenzylidenes seemed to depend on the reaction conditions. Higher yields of the monobenzylidenes 2 and 3 were obtained by conducting the reaction in the presence of UV light. The structures of these monobenzylidenes were established as cis and trans isomers of 1-(p-bromobenzylidenes)-2-indanone on the Basis of elemental analyses and ir and nmr spectroscopy. The ir spectra⁴ (CHCl₃)

of compounds 2 [1725 (c=0), 1620 (c=c)cm^?1] and 3[1710 (c=o), 1570, 1600 (c=c) cm^?1] were consistent with the structures. The molecular ion peaks as well as the fragmentation patterns in the mass spectra of both these compounds were consistent with the assigned structures. Before going into the omr discussion it should be pointed out that treatment of compound 2 with athylene glycol in the presence of p-toluene sulfonic acid produced two ketals, 5 (38.3% mp, 118–120°) and 6 (30.6% mp, 125–126°). As depicted; the ketals 5and 6 were also found (by omr) to be related to each other as cis and trans isomers. Furthermore, each of them could be hydrolyzed with acid to the corresponding monobenzylidenes 2 and 3 without any isomerization. However, UV irradiation of compounds 2 and 3 gave equilibrium mixtures containing both the isomers, indicating isomerization had occurred under photolytic conditions.     

Polymerization of Styrene Initiated by 1,4-Dimethyl-1,4-bis(p-anisyl)-2-tetrazene

Abstract

The polymerization of styrene (St) initiated by 1,4-dimethyl-1,4-bis(p-anisyl)-2-tetrazene (1a) was studied kinetically in benzene. The polymerization proceeds through a radical mechanism. The rate of polymerization is proportional to [1a]^0.5 and [St]^1.0. The overall activation energy for the polymerization is found to be 81.2 kJ/mol within the temperature range of 65 to 80°C. The activation parameters for the decomposition of 1a at 70°C are k_d = 1.88 × 10^?5s^?1, δH? = 133.1 kJ/mol, and δS? = 29.9 J/mol·deg.     

Perchlorate Ion-Selective Electrodes with the Liquid Membranes of the O-Phenanthroline Chelate or its Related Compounds

Abstract

The metal chelates of o-phenanthroline, a, a′-dipyridyl or bathophenanthroline were used as the ion exchanger in the liquid membrane of the perchlorate ion-selective electrode. The electrode with a nitrobenzene membrane containing tris(bathophenanthroline)ferrous perchlorate is the highest sensitive one and gives a linear Nernstian response up to about 1 × 10 ^?5 M perchlorate. The membrane electrode having the ferrous ion-chelate of o-phenanthroline as an ion exchanger shows an excellent selectivity for perchlorate ion over nitrate or iodide Ion. The effects of the chelate concentration in the membrane and the central metal species of the chelate are examined on the electrode performance.     

Analysis of Frozen Aqueous Solutions by Spark Source Mass Spectroscopy

Abstract

Aqueous solutions can be analyzed directly in a spark source mass spectrograph by sparking to frozen drops of the sample solution. The minimum detection limit obtained from a 10^?8 coulomb exposure is about 5 × 10^?7 M solution concentration. Analytical precision of 8 to 30% relative is achieved through use of an internal standard added to the sample solution.     

An Allylic Rearrangement Arising from Reaction of Fluoride Ion and A 3-Chloro, 4,5-Unsaturated Uronate Derivative

Reaction of methyl [benzyl 2-[(benzyloxycarbonyl)-amino]-3-chloro-2,3,4-trideoxy-β-L-threo-hex-4-enopyrano-sid]uronate,3,4-trideoxy-β-L-threo-hex-4-enopyranosidjuronate (7) with silver fluoride gave the 5-fluoro, 3,4-unsaturated uronate derivative 8, which, on treatment with methanolic ammonia, afforded the corresponding 5-meth-oxy, uronamide 9. The structures of 8 and 9 were confirmed by spectral data and by x-ray crystallographic analysis of 8. ¹H NMR spectroscopy parameters for 9 and its diastercomen 11 have been used to probe the conformational preferences in solution.     

An Ion-Selective Electrode for Dibasic Phosphate Ion

Abstract

A phosphate-selective electrode is developed based on a silver coordination reaction. The electrode responds linearly toward HPO₄ ⁼ in the concentration range of 10^?4 to 10^?1 M (slope = 27 mV/dec.). The electrode also shows good selectivity over sulfate, nitrate, perchlorate and acetate.     

Direct Titration of Nitrate with Diphenylthallium(III) Sulfate

Abstract

Nitrate may be titrated with diphenylthallium(III) sulfate. The titration may be monitored amperometrically or potentiometrically. Fluoride, perchlorate, sulfate and phosphate do not interfere. Chloride, bromide and iodide interfere and must be removed. For amperometric titration, the range is 5 – 22 × 10^?3 M nitrate.