Carbon Nanostructured Screen‐printed Electrodes Modified with CuO/Glucose Oxidase/Maltase/SiO2 Composite Film for Maltose Determination

A sensitive voltammetric method was developed to determine maltose in beverage products using a carbon nanostructured screen‐printed electrode modified with CuO/glucose oxidase/maltase/SiO₂ biocomposite film. Adding CuO particles was done to possess catalytic activity toward hydrogen peroxide. Electrode modified by glucose oxidase and maltase shows a good response to maltose. A well‐defined reduction peak was registered at the potential of ?0.55 V (vs. Ag/AgCl) which intensity increases linearly with the concentration of maltose ranging from 0.01 to 0.1 mmol L^?1. The calculated limit of detection was 0.005 mmol L^?1. Tested on the beer samples, the developed CuO/glucose oxidase/maltase/SiO₂ biocomposite film covered carbon nanostructured screen‐printed electrode is showed to be a prospective sensitive element of the third generation biosensor for maltose.     

Micro-Enzyme Electrode Prepared on Platinized Platinum

Abstract

Micro-enzyme electrode with high performance was fabricated on a micro-platinum electrode surface (diameter = 50 ～ 200 μm) by taking advantage of very huge surface of platinized platinum. Glucose oxidase was incorporated into the micropores of platinum particle by immersing a micro-platinized platinum electrode in a solution containing glucose oxidase. The micro-enzyme electrode for glucose demonstrated high performance such as high sensitivity (the least detectable limit : 5 × 10^?7 M), fast responsiveness (100 % response : 3 sec), and accuracy (C.V. = 1.4 %) in the repeated determination of glucose.     

Amperometric Biosensors Based on Platinum Nanowires

Abstract

Platinum nanowires (PtNW) were prepared by an electrodeposition strategy using nanopore alumina template. The nanowires prepared were dispersed in chitosan (CHIT) solution and stably immobilized onto the surface of glassy carbon electrode (GCE). The electrochemical behavior of PtNW‐modified electrode and its application to the electrocatalytic reduction of hydrogen peroxide (H₂O₂) are investigated. The modified electrode allows low potential detection of hydrogen peroxide with high sensitivity and fast response time. As an application example, the glucose oxidase was immobilized onto the surface of PtNW‐modified electrode through cross‐linking by glutaric dialdehyde. The detection of glucose was performed in phosphate buffer at –0.2 V. The resulting glucose biosensor exhibited a short response time (<8 s), with a linear range of 10^?5?10^?2 M and detection limit of 5×10^?6 M.     

Glucose Oxidase Electrode Based on Graphite and Methylthio Tetrathiafulvalene as Mediator

Abstract

A glucose sensor based on glucose oxidase and a new mediator - 4,5-dimethyl-4′-methylthio-Δ 2,2′-bi-1,3-dithiole (MTTTF) is described. The background for sensor action is the effective MTTTF cation interaction (apparent bimolecular constant (2.0+/-0.5)?10⁶ M^?1 s^?1 at 25°C and pH 7.0) with reduced glucose oxidase and the high electrochemical rate of mediator transformation.

A glucose sensor was prepared by adsorbing mediator (MTTTF) and glucose oxidase on graphite rods. The sensor responds to glucose at electrode potentials higher than 50 mV vs SCE, but the maximal activity is obtained at a potential of 250 mV. In air saturated solution the electrode shows a non-linear calibration curve with a half-saturation concentration 10.4 mM and Hill coefficient 2.08 at 250 mV. Sensor response changes little at pH 6.5–8.0. The energy of activation of the sensor response calculated from the Arrhenius equation was 64.5 kJ/mol, and the temperature coefficient at 25°C was 9.2%.     

An Amperometric Glucose Electrode Based on Adsorbed Glucose Oxidase on Palladium/Gold Modified Graphite

Abstract

A glucose electrode was constructed by adsorbing glucose oxidase (GOD) on a modified electrode for H₂ O ₂ oxidation, consisting of Pd/Au sputtered on graphite. Maximally, 0.8 U cm^?2 of GOD could be adsorbed. The electrode was used in a f.i.a. manifold for determination of glucose. Linear calibration curves were obtained in the concentration range 3. 10^?6 4. 10^?3 mol L^?1 glucose. The applied potentials for glucose determination were + 300 mV vs. Ag/AgCl at pH 8.0, + 350 mV at pH 7.0, + 400 mV at pH 6.0 and + 500 mV at pH 5.0. The activity vs. pH profile of adsorbed GOD was broad having an optimum between pH 5 and 6. The apparent kinetic parameters for adsorbed GOD, K_M ^app and i_max, were found to be 50 mM and 160 uA at optimal pH.     

A Prospect for the Analysis of Species Acting as Enzyme Inhibitors as Illustrated by Heavy Metal Inhibition

Abstract

A flow system incorporating an amperometric glucose oxidase enzyme electrode has been used to study the inhibitory effects of 16 metal cations on glucose oxidase. Only copper(II), mercury(II) and silver(I) caused any significant inhibition. the enzyme electrode could be reactivated by EDTA, the reactivation being most effective for copper(II) and least so for silver(I). Other complexing agents were tried for reactivation but proved to be unsatisfactory.

The ability to reactivate the enzyme on the electrode following copper(II) inhibition, and the linear response of the system to the level of this inhibitor according to I/A = -9.49 × 10^?7 log([Cu]/M) + 4.84 × 10^?8; r = 0.994 between 2.5 × 10^?4M and 5 × 10^?3M [Cu]²⁺ indicates a prospect for the use of a flow system for determining enzyme inhibitors in samples.     

银纳米修饰电极的制备及电化学行为

金属纳米粒子由于其小的体积和大的比表面积而具有独特的电子、光学和异相催化特性,是目前表面纳米工程及功能化纳米结构制备的一种理想研究对象[1]。银纳米粒子可广泛应用于催化剂材料、电池的电极材料、低温导热材料和导电材料等,成为近年来人们研究的热点[2,3]。在电化学方面,银纳米粒子具有比其他纳米粒子更为优异的导电性能和电催化性能。因此,研究银纳米粒子修饰电极有重要的应用价值和前景[4]。1实验部分1.1仪器CHI660电化学工作站(USA);TU-1901型双光束紫外可见分光光度计(北京普析通用仪器公司);KQ-100型超声清洗器(昆山市超声…     

Determination of Captropril using adsorptive cathodic differential pulse stripping voltammetry with the HMDE

A voltammetric method for the determination of 3-mercapto-D-2-methylpropanoyl-L-proline, a hypotensive drug whose pharmaceutical name is Captopril (CPT), in the concentration range from 9.0×10⁻¹⁰M to 3×10⁻⁶M, is described. In this range the peak current increases linearly with drug concentration even when different collection periods are used. A self-cleaning Hanging Mercury Drop Electrode (HMDE) was used and a negative Differential Pulse potential (DP) was applied to the indicator electrode. The stripping peak of CPT splits into two peaks as soon as the concentration is increased over about 10⁻⁵M; in the oxidation DP scan, instead, this splitting is observed at a concentration of 2.0×10⁻⁴M. Some attempts were made to verify the suitability of other techniques such as Alternating Current polarography (AC) and the use of a different electrode, the Wax-Impregnated Graphite Electrode (WIGE).     

Ionenspezifische Glaselektroden

Zusammenfassung An Hand einer neueren erfolgversprechenden Theorie der Glaselektrode, der Phasengrenzpotentialtheorie, wird gezeigt, in welchem Maße gewisse Zusätze im Elektrodenglas die Eigenschaften desselben grundlegend verändern. Zusätze an dreiwertigen Metalloxiden, insbesondere Al₂O₃ und B₂O₃, ziehen ein spezifisches Ansprechvermögen auch auf andere einwertige Ionen nach sich (Beckman Cationic Electrode). Durch teilweisen Ersatz der Na₂O-Komponenten des Elektrodenglases durch Li₂O, wird ein extrem spezifisches Ansprechvermögen auf Na⁺-Ionen hervorgerufen (Beckman Sodium Electrode). Es werden Anwendungsbeispiele, Vorzüge und Grenzen dieser neuen Elektrodensorten erläutert.

---

Summary A recent promising theory of the glass electrode, the theory of interface potential, is discussed and it is shown how far certain additives in the electrode glass can change its properties fundamentally. Addition of trivalent metal oxides (especially Al₂O₃ and B₂O₃) results in a specific response to other univalent ions, too (Beckman Cationic Electrode). Partial substitution of the Na₂O components of the glass by Li₂O causes an extremely specific response to Na⁺ ions (Beckman Sodium Electrode). Applications, advantages and limitations of these new dydes of electrodes are discussed.

     

An Electrochemical Sensor Based on Ni(II) Complex and Multi Wall Carbon Nano Tubes Platform for Determination of Glucose in Real Samples

In the present paper, a stable and selective non‐enzymatic sensor is reported for determination of glucose (Glc) by using a carbon paste electrode modified with multiwall carbon nanotubes and Ni(II)‐SHP complex as modifier in an alkaline solution. This modified electrode showed impressive activity for oxidation of glucose in NaOH solution. Herein, Ni(II)‐SHP acts as a suitable platform for oxidation of glucose to glucolactone on the surface of the modified electrode by decreasing the overpotential and increasing in the current of analyte. Under the optimum conditions, the rate constant and electron transfer coefficient between electrode and modifier, were calculated to be 1.04 s⁻¹ and 0.64, respectively. The anodic peak currents indicated a linear dependency with the square root of scan rate and this behavior is the characteristic of a diffusion controlled process. So, the diffusion coefficient of glucose was found to be 3.12×10⁻⁶ cm² s⁻¹ due to the used number of transferred electron of 1. The obtained results revealed two linear ranges (5 to 190.0 μM (R²=0.997), 210.0 to 700.0 μM (R²=0.999)) and the detection limit of 1.3 μM for glucose was calculated by using differential pulse voltammetry (DPV) method. Also, the designed sensor was used for determination of glucose in the blood serum and urine samples. Some other advantages of Ni(II)‐SHP/CNT/CPE sensor are remarkable reproducibility, stability and selectivity which can be related to using nanomaterial of carbon nanotubes due to enhancement of electrode surface area.     

Development of a Novel Silver Nanoparticles-Enhanced Screen-Printed Amperometric Glucose Biosensor

Abstract

A disposable glucose biosensor is developed by immobilizing glucose oxidase into silver nanoparticles-doped silica sol-gel and polyvinyl alcohol hybrid film on a Prussian blue-modified screen-printed electrode. The silver nanoparticles-enhanced biosensor shows a linear amperometric response to glucose from 1.25 × 10^?5 to 2.56 × 10^?3 with a sensitivity of 20.09 mA M^?1 cm^?2, which is almost double that of the biosensors without silver nanoparticles. The immobilized glucose oxidase retained 91% of its original activity after 30 days of storage in phosphate buffer (pH 6.9; 0.1 M) at 4°C. Blood glucose in a rabbit serum sample was successfully measured with the biosensor.     

Investigation of ion-selective electrodes based on quaternary phosphonium salts: Part 2. A tetrachlorothallate(III) Ion-Selective Electrode

A tetrachlorothallate(III)-selective electrode based on the tetradecylphosphonium tetrachlorothallate(III) ion-pair complex in a PVC membrane is described. The mechanism of the influence of the hydrochloric acid content of sample solutions is discussed in detail. Electrode membranes made with and without dubutyl phthalate as plasticizer were investigated. The membranes without plasticizer are better with regard to selectivity and limit of detection (2 × 10^?7 mol 1^?1).     

Determination of Inorganic and Organic Thiophosphates with Ion-Selective Membrane Electrodes

Abstract

The conditions for the determination of sodium thiophosphate and sodium S-(2-amino-ethyl)-thiophos-phate in the presence of phosphate ion using ion-selective membrane electrodes are described. Both thiophosphates (inorganic and organic) are hydrolyzed in acidic medium. The phosphate ion is determined with Pb(II) using a Pb²⁺ – selective membrane electrode.

Cysteamine is determined by potentiometric titration with Hg(I1) using a Ag⁺/S^2? – crystal membrane electrode or by direct potentiometry with a Cu²⁺ selective membrane electrode. The results were verified by the iodination method.     

Semiconducting tin oxide electrodes in molten sodium chloroaluminate at 175°C

Electrode behavior of Sb-doped poly-crystalline tin oxide electrodes has been investigated by means of current and differential capacity measurements in molten chloroaluminate melts (AlCl₃+NaCl) with different pCl values. The SnO₂ is stable in the melts consisting of near equimolar composition, being used as an indicator electrode possessing a polarizable potential region between chlorine evolution and its cathodic decomposition. The differential capacity is assigned to the space charge layer capacity of the electrode side and its potential dependence is explained by using the Mott-Schottky equation. It is found that the flat band potential does depend on pCl (=?log a_Cl^?) at a rate of 2(2.3kT/e) per pCl unit. This anomaly is attributed to the specific adsorption of Cl^? ions on the oxide electrode.     

Construction and analytical applications of an improved liquid-membrane electrode for salicylate

The construction and analytical applications of an improved liquid-membrane electrode for salicylate are described. Tests of various combinations of symmetrical tetraalkylammonium salicylates and solvents showed that the best liquid ion-exchanger was tetraoctylammonium salicylate in p-nitrocumene. Electrode response is Nernstian down to 2 × 10^?5 M. Major interferences are perchlorate and periodate; the working pH range is 6–9. The electrode is useful for direct potentiometric determinations of salicylate in pharmaceutical preparations.     

A Novel Enzyme Membrane Electrode for Oxalate Determination in Foodstuffs

Abstract

An enzyme membrane electrode usable for the assay of oxalate in foodstuffs is described. A commercially available preactivated polyamide membrane was used for the immobilization of oxalate oxidase. The bioactive disk thus obtained was associated with an amperometric transducer. The resulting self-contained enzyme electrode wich allows oxalate determination in various materials with minimal pretreatment exhibits a linear calibration ranging from 10–7 M and 10–4 M in the cell. The response-time was comprised between 20 seconds and 1 minute, depending on the oxalate content in the sample. The electrode-response was very stable for at least 4 months, a period during which more than 150 assays were performed.

The results obtained with several food materials were in good agreement with those obtained with the conventional spectrophotometric method. Assays were also performed with a microprocessor-based analyzer normally used for glucose measurements with a glucose oxidase electrode When the analyzer is equipped with an oxalate oxidase membrane, without further setting, oxalate can be determined in the range 5 10^?3 M-10^?1 M in the sample.     

Amperometric Glucose Biosensor Based on the Deposition of Copper and Glucose Oxidase onto Glassy Carbon Transducer

ABSTRACT

The performance of a first generation glucose amperometric biosensor based on the entrapment of glucose oxidase (GOx) within a net of copper electrodeposited onto activated glassy carbon electrode, is described. The copper electrodeposited offers an efficient electrocatalytic activity towards the reduction of enzymatically-liberated hydrogen peroxide, allowing for a fast and sensitive glucose quantification. The influence of the electrodeposition conditions (pH, potential, time, copper salt and enzyme concentrations) on the response of the bioelectrode was evaluated from the amperometric signals of hydrogen peroxide and glucose. The combination of copper electrodeposition with a nation membrane allows an excellent selectivity towards easily oxidizable compounds such as uric and ascorbic acids at an operating potential of -0.050 V. The response is linear up to 2.0 × 10^?2 M glucose, the detection limit being 1.2 × 10^?3 M.     

Amperometric Glucose Biosensor Based on Platinum Nanoparticles Combined Aligned Carbon Nanotubes Electrode

A sensitive amperometric glucose biosensor based on platinum nanoparticles (PtNPs) combined aligned carbon nanotubes (ACNTs) electrode was investigated. PtNPs which can enhance the electrocatalytic activity of the electrode for electrooxidating hydrogen peroxide by enzymatic reaction were electrocrystallized on 4‐aminobenzene monolayer‐grafted ACNTs electrode by potential‐step method. These PtNPs combined ACNTs' (PtNPs/ACNTs) surfaces were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The highly dispersed PtNPs on ACNTs can be obtained. The enzyme electrode exhibits excellent response performance to glucose with linear range from 1×10^?5–7×10^?3 mol L^?1 and fast response time within 5 s. Furthermore, this glucose biosensor also has good reproducibility. It is demonstrated that the PtNPs/ACNTs electrode with high electrocatalytic activity is a suitable basic electrode for preparing enzyme electrodes.     

Electrocatalytic oxidation of glucose at a Ni-curcumin modified glassy carbon electrode

The electrocatalytic oxidation of glucose was investigated on a nickel-basedchemically modified electrode (Ni(II)-curcumin) prepared by electropolymerization of Ni-curcumin complex (curcumin=1,7-bis[4-hydroxy-3-methoxyphenyl]-1,6-heptadiene-3,5-dione) in alkaline solution. Reaction kinetic and mechanism were investigated by using cyclic voltammetry (CV) and chronoamperometry (CA) techniques and steady-state polarization measurements. Cyclic voltammetry studies indicated that in the presence of glucose the anodic peak current of surface redox mediator was increased, followed by decrease in the corresponding cathodic current. This indicates that glucose was oxidized at the surface of this modified electrode. The results were explained based on the concept of electrocatalytic reactions that occur in this chemically modified electrode. The diffusion coefficient of glucose and the rate constant of the catalytic oxidation of glucose were found to be 6.7×10⁻⁶ cm² s⁻¹ and 6.5×10³ M⁻¹ s⁻¹, respectively. It has shown that by using the Ni-curcumin modified electrode, glucose can be determined with good response and low detection limit.     

Response of the jalpaite membrane copper(II) ion-selective electrode in marine waters

The response of the Orion 94-29 Cu^II ion-selective electrode (ISE) [employing a jalpaite membrane] in seawater has been related to levels of free Cu^II yielding results for the Derwent River and San Diego Bay that are 2 to 3 orders of magnitude higher than those for the Pacific Ocean. Response data for the electrode in acidified seawater at pH 2 are internally consistent with total Cu^II levels determined using differential pulse anodic stripping voltammetry (DPASV) and graphite furnace atomic absorption spectrometry (GFAAS). It has been found that, even in acidified seawater, the organic ligands influence the response of the electrode, and this effect can be compensated successfully by either analyzing UV-photooxidized seawater and/or using a standard addition technique. The assigned ISE results for total Cu^II in acidified seawater fall within ± (0.1–0.5) pCu unit of values determined using GFAAS. Electrode drift in seawater can be minimized by using a polished electrode that has been conditioned in seawater for 24 h. The improved response rate of a conditioned ISE minimizes electrode soaking times and sample contamination through membrane corrosion.