高温氧化-化学发光检测法测定水中总氮

采用高温氧化-化学发光检测法（high temperature oxidation ＆ chemiluminescence, HTO-CL）进行水质总氮（TN）的在线测定。总氮浓度（CN）与化学发光的强度（IN）呈良好的线性关系,线性区间为0．05～100mg／L。对真实水样采用本方法进行测定,其结果与国标方法相符,回收率在90％～110％之间。以本方法为工作原理的TN-2000型总氮测定仪可用于地表水质及污水的在线监测。     

Persulfate Oxidation and Diphenylcarbazide Photometric Determination of Chromium in Super Alloys

The quantitative analysis of Cr in super alloys with the presence of a wide variety of elements, Al, B, C, Co, Cu, Hf, Fe, Mn, Mo, Ni, Nb, P, Si, S, Ti, Ta, W, Zr; and trace amounts (a few ppm) of Pb, Se, Bi, Tl and Te has been studied. Persulfate oxidation and diphenylcarbazide photometric method were studied with the purpose of developing a relatively fast and reliable measurement for Cr by wet chemical analysis. The results indicate that the latter is supperior to the former in practical view. In the photometric method, solid sample (0.1g alloys) when treated with HClO₄ and H₂SO₄ took ca. 72 hrs. for complete dissolution. When treated with HCl followed by HNO₃, 0.1 g alloys were completely dissolved within 1&1/2; hours. The best experimental conditions for diphenylcarbazide photometric determination of Cr was thus established. Photometric determination of Cr complexes was made at 540 nm.     

多相催化过硫酸盐工艺处理水环境中有机污染物的非自由基过程

20世纪80年代至今,水处理技术中的高级氧化过程(AOP)已被广泛研究及应用。然而水体中的有机污染物仍因种类繁多和降解难易不同困扰着研究者们,因此对于AOP的机理过程需要更深入的分析认识,以利于技术的进一步发展及应用。AOP中的过硫酸盐氧化工艺近年来得到大量关注,其自由基机理的关键活性物种是·OH 和·SO₄^-。非自由基机理分为¹O₂氧化和PS直接氧化(也称电子转移),某些体系中高价态金属也直接或间接地参与氧化过程。但非自由基过程的发生机理及优势特点仍存在争议。本文综述了基于多相催化过硫酸盐高级氧化过程处理水中有机污染物的最新研究,阐述反应机理及其分析手段,并指出当前研究可能存在的问题。对于过硫酸盐高级氧化工艺中非自由基过程的未来研究方向及应用前景提出展望。     

Aqueous Media Oxidation of Alcohols with Ammonium Persulfate

Oxidation of series of various primary and secondary alcohols to corresponding carbonyl compounds with ammonium persulfate in aqueous media was described. No over oxidation of primary alcohols to carboxylic acids and secondary alcohols to esters was observed. Under such conditions benzoin was converted to benzoic acid.     

全自动流动注射-分光光度法测定土壤中氨氮

传统的氯化钾溶液提取分光光度法测定土壤中氨氮时,需要加入硝普钠-苯酚显色剂混匀后一定时间再加入二氯异氰尿酸钠显色剂,这个过程中人为接触苯酚等有机试剂的时间较长,对人体和环境有一定的危害;且传统的比色法显色时间至少需要5h,显色时间较长,分析效率较低.应用全自动流动注射-分光光度法测定土壤中氨氮,考察了提取试剂的厂家、浓...     

活化过硫酸盐原位化学氧化修复有机污染土壤和地下水

原位化学氧化 （ISCO）是近些年来国内外较为推崇的一种土壤和地下水修复技术。过硫酸盐（PS,S₂O₈^2-）具有易运输、较稳定、易溶于水和易传质等性质,能很好地适应ISCO的发展要求。它在光、热、过渡金属离子、强氧化剂和强碱性环境等活化条件下,能产生强氧化性的硫酸根自由基SO₄^·-,适用于氧化降解各种有机污染物。本文在分析活化过硫酸盐（activated persulfate,APS）氧化机理的基础上,综述了不同方式活化过硫酸盐原位修复有机污染土壤和地下水及APS协同、联用技术的应用,并就值得深入研究的问题和热点趋势进行了展望。     

钛基金属氧化物电极制备及其氨氮废水降解性能

采用热分解方法制备了4种电极钛基金属氧化物：Ti/SnO₂+Sb₂O₃、Ti/SnO₂+Sb₂O₃/SnO₂+IrO₂、Ti/SnO₂+Sb₂O₃/SnO₂+RuO₂和Ti/SnO₂+Sb₂O₃/SnO₂+CeO₂. X-射线衍射分析表明Ti/SnO₂+Sb₂O₃/SnO₂+CeO₂电极的CeO₂晶体结构完好,连续工作较长时间电极表面没有明显析氧. 使用该电极电解氧化氨氮模拟废水（降解2 h）,氨氮模拟废水从高浓度（500 mg·L^-1）降解为较低浓度（180 mg·L^-1）,降解效率可达64%,电解活性最佳.     

TiO2纳米管阵列光电催化氧化处理氨氮废水

用电化学阳极氧化法制备了高度有序的钛基二氧化钛纳米管阵列薄膜。用场发射扫描电镜(FE-SEM)、X射线衍射(XRD)表征样品的形貌与晶型特征。以二氧化钛纳米管阵列为光阳极,石墨为对电极,测试了不同pH值和外加偏压条件下的光电流响应和光电催化氧化降解NH4Cl水溶液(以N计,100 mg·L-1)的效率。结果表明:所制备的TiO2纳米管阵列具有锐钛矿和金红石的混晶结构,且主要晶型为锐钛矿。光电流响应的强弱与光电催化氧化效率的高低相对应,降解氨氮废水的最佳条件为pH=11,偏压为1.0 V。     

全自动凯氏定氮仪测定化肥中的含氮量

建立全自动凯氏定氮仪检测化肥中氮含量的分析方法。称取总氮量在0.03~0.3 g范围的样品,经消解仪消解及全自动凯氏定氮仪碱化蒸馏,以硼酸为接收液,用0.15~0.20 mol/L的盐酸标准溶液进行自动滴定。该方法加标回收率为99.0%~101.5%,测定结果的相对标准偏差小于1.0%(n=6)。与国标GB/T 8527–2010法测定结果无显著性差异,全自动凯式定氮仪法的准确度、精密度均优于国标方法,而且所用试剂少、分析时间短,满足实验室快速检测大批量化肥中含氮量的需要。     

水中总磷和总氮含量的离子色谱测定法

采用紫外光-臭氧氧化结合离子色谱法对氧化消解后的水样同时进行总磷和总氮的测定。配制Na2CO3/NaHCO3淋洗液,采用1 mL定量环,大体积直接进样。在优化工作条件下,总磷在0.05～5.00 mg/L,总氮在0.10～10.0 mg/L范围内线性良好,线性相关系数分别为0.9999和0.9998,总磷和总氮检出限为分别3.60和4.57μg/L;总磷和总氮的检测相对标准偏差(RSD)分别低于4.9%和4.1%,总磷加标回收率为95.0%～105.0%,总氮加标回收率为93.0%～103.0%。自然环境水样检测与真实值相对偏差小于4.2%。本方法选择性好,灵敏度高,精密度和准确度高,用于实际水样中总磷和总氮含量测定的结果与国标法(GB11894-89,GB11893-89)基本一致     

水质中总氮测定的影响因素分析

采用碱性过硫酸钾消解―紫外分光光度法对水质中总氮含量进行测定,分析影响总氮测定结果的各种因素。实验结果显示,测定水中总氮过程中,实验所用纯净水、过硫酸钾纯度及碱性溶液存放时间对空白吸光度有明显影响,消解时间和冷却放置时间也会影响测定的空白吸光度和相对误差。在实验确定的最佳条件下对样品进行测定,结果准确可靠。     

用氨气敏电极测定瘤胃液中的氨氮含量

本文报道采用ORION 940型离子酸度计,95-12型氨气敏电极,用直接测定法,快速、简便、精确地测定了山羊瘤胃液中的氨氮含量。     

纳氏试剂分光光度法测定铝灰渣浸出液中的氨氮含量

随着水土资源环境日益恶化,监测氨氮量对水土的污染程度也备受关注。为了准确测定铝灰渣浸出液中的氨氮量,实验对振荡方法、振荡时间、固液比、试液过滤方式、纳氏试剂加入量以及测定干扰因素进行了研究。确定了以翻转振荡为前处理方式,最佳振荡时间为14 h,固液比为1:10,最佳纳氏试剂加入量为1.0 mL,通过改善过滤方式,降低了空白值。由实验结果可知：在试验范围内,F^-对氨氮量的测定不产生干扰;对于浸出液中Cl^-、Al³⁺和Ca²⁺浓度高的样品,可通过移取稀释液2.00 mL,加入1.0 mL酒石酸钾钠溶液(500 g/L),即可消除其干扰。运用纳氏试剂分光光度法测定铝灰渣浸出液中的氨氮量,得到氨氮标准曲线线性相关系数为0.9998,方法检出限为0.39 mg.L^-1,RSD(n=6)<5%,回收率在94.7%～105%之间。本方法简单快速,精密度高,且具有较低的检出限,适用于大批量铝灰铝渣等固体废物浸出液中氨氮量的测定。     

Towards Green Ammonia Synthesis through Plasma-Driven Nitrogen Oxidation and Catalytic Reduction

Ammonia is an industrial large-volume chemical, with its main application in fertilizer production. It also attracts increasing attention as a green-energy vector. Over the past century, ammonia production has been dominated by the Haber–Bosch process, in which a mixture of nitrogen and hydrogen gas is converted to ammonia at high temperatures and pressures. Haber–Bosch processes with natural gas as the source of hydrogen are responsible for a significant share of the global CO₂ emissions. Processes involving plasma are currently being investigated as an alternative for decentralized ammonia production powered by renewable energy sources. In this work, we present the PNOCRA process (plasma nitrogen oxidation and catalytic reduction to ammonia), combining plasma-assisted nitrogen oxidation and lean NO_x trap technology, adopted from diesel-engine exhaust gas aftertreatment technology. PNOCRA achieves an energy requirement of 4.6 MJ mol⁻¹ NH₃, which is more than four times less than the state-of-the-art plasma-enabled ammonia synthesis from N₂ and H₂ with reasonable yield (>1 %).     

纳氏试剂测定水中氨氮影响因素的探讨

对国家生活饮用水标准检验方法"GB/T5750—2006"中涉及到的水中氨氮的检测条件进行了探讨,讨论了样品的采集与保存,影响显色、空白值的各项因素,并提出相应的解决办法。对国家标准物质以及实际样品的验证表明,方法的相对误差为0.03%~1.5%,相对标准偏差RSD为0.55%~5.3%,准确度也能满足分析要求,对国家标准方法进行了补充与细化,在实际工作中有参考价值。     

基于邻苯二甲醛-NH_3-Na_2SO_3反应的固相荧光分析方法测定水样中的氨氮

基于邻苯二甲醛(OPA)-NH3-Na2SO3体系的荧光反应,以滤纸为固相载体,建立了检测水样中氨氮的固相荧光分析新方法。对滤纸的浸泡时间、反应液的p H值、反应时间等实验参数进行了优化,优化结果为:滤纸的最佳浸泡时间为4 h以上;反应液的适宜p H值为11.5~13.0;反应平衡时间为165 min。在优化实验条件下,方法的线性范围为2.00~12.0μmol/L;检出限为0.746μmol/L;泉水和河水的基底加标回收率为89.6%~101.6%。采用该法成功测定了14个河水水样,与靛酚蓝分光光度法测定结果比较,无显著差异。     

Deconvolution Method for Determination of the Nitrogen Content in Cellulose Carbamates

Cellulose carbamate (CC) is a derivative of cellulose. It can be turned into synthetic fiber in high quality with the existing viscose facilities1. CC was first reported by Hill and Jacobsen2. Since the 80's, numerous papers and patents about study on CC have been reported3-9. The studies on the synthesis of CC and the manufactures of fibers prevailed in these reports. But there were quite few reports about the characterization and the properties of CC10. Elemental analysis and FTIR mea…     

Indirect Oxidation of Organic Substances by Intermediates of the Oxygen Reduction

Results of two urgent and practically important directions of research on the indirect oxidation of organic compounds by highly reactive intermediates generated electrochemically from oxygen (HO₂ ^–, HO₂ ^·, HO^·) are considered and orderly arranged. The studies in question are the indirect synthesis and mineralization of organic toxicants in waste water.     

岗稔提取物总酚含量测定方法的研究

总酚具有抗氧化、捕捉自由基、抑菌等作用,在食品加工、果蔬加工、贮藏、医药等方面都有应用价值。对岗稔果实中有效成分总酚进行提取,并测定其含量。为岗稔在实际产业中应用提供参考。