Electrogenerated chemiluminescence of poly[(2,2′-bipyridyl)(4-(2-pyrrol-1-ylethyl)-4′-methyl-2,2′-bipyridyl)2]ruthenium (II) film

Elelctrogenerated chemiluminescence (ECL) of electropolymerized films based on [(2,2′-bipyridyl)(4-(2-pyrrol-1-ylethyl)-4′-methyl-2,2′-bipyridyl)₂]ruthenium (II) was firstly investigated in both organic and aqueous solution. The ECL behaviors have been explained by two typical mechanisms, namely, redox-cycling type and oxidative-reduction type. For the former, no co-reactant was required and for the latter, tripropylamine (TPA) and (NH₄)₂C₂O₄ were selected as co-reactants in the organic and aqueous system, respectively.     

Ligand and surfactant effects on a novel electrochemiluminescent reaction involving cadmium

Electrochemiluminescence (ECL) is the generation of light during a chemical reaction with at least one of the reagents being generated in situ at an electrode. Recently, a host of methods have been developed employing ECL reactions as an analytical technique where one of the ECL reagents is the analyte. Electrochemiluminescent reactions involving aqueous metal ions can offer an alternative method for quantitation of dissolved metals. Previous work developed an ECL system using 1,10-phenanthroline as an ECL reagent in conjunction with Cd²⁺ ions providing sufficient emission for reliable cadmium detection. This paper explores the effects of ligand modification, choice of surfactant, and the interaction between the surfactant and the co-reactant tripropylamine (TPA). The effectiveness of the reagents tested can be ranked as phenanthroline, bathophenanthroline salt, terpyridine, dimethylphenanthroline, and bipyridine in order of decreasing Cd²⁺ specific ECL emissions. The non-ionic surfactants Triton X-100, Thesit, and Nonidet P40 were surveyed.     

Two new 1D cadmium(II) azido complexes: catina-Poly[di-μ1,1-azido(2,2′-bipyridyl)cadmium(II)] and a new polymorph of catina-Poly[di-μ1,1-azido (2-acetylpyridine)cadmium(II)]

Two new cadmium(II) azido complexes, [Cd(2,2′-bipy)(N₃)₂]_n (1) and [Cd(2-acpy)(N₃)₂]_n (2) (2,2′-bipy?=?2,2′-bipyridyl and 2-acpy?=?2-acetylpyridine), have been synthesized and structurally characterized by single-crystal X-ray diffraction methods. The coordination environment of the central cadmium atom is distorted octahedral (MN₆) in 1 and (MN₅O) in 2, with one-dimensional chains formed through Cd₂N₂ units and alternatively chelating N,N′-bipyridyl or N,O-2-acetylpyridine groups. The central Cd(II) ion is coordinated to two nitrogen atoms of a chelating bipyridyl group or one nitrogen atom and one acetyl oxygen of 2-acetylpyridine and four nitrogen atoms of four different end-on bridging (μ_1,1-N₃) groups. Chains in the c direction in 1 are stabilized in b direction by π–π interactions involving the aromatic rings of bipyridyl ligands. IR and NMR spectra of the two complexes are reported.     

Syntheses,crystal structures,and characterization of three metal–organic complexes with 2,2′-biphenyldicarboxylic acid and phenanthroline ligands

Three complexes constructed with 2,2′-biphenyldicarboxylic acid, multidentate nitrogen donors, and metal salts, {[Cd(2,2′-dpdc)(tppp)(H₂O)]₂?·?2H₂O} _n (1), {[Pb(2,2′-dpdc)(pyphen)]₂} _n (2), and {[Pb(2,2′-dpdc)(dppz)]} _n (3) (H₂dpdc = 2,2′-diphenyldicarboxylic acid; tppp = 4-(1H-1,3,7,8-tetraazacyclopenta[l]phenanthren-2-yl)phenol; pyphen?=?pyrazino[2,3-f]-[1,10]phenanthroline; and dppz = dipyrido[3,2-a:2′,3′-c]phenazine), are synthesized under hydrothermal conditions. These complexes are characterized by single-crystal X-ray diffraction, elemental analysis, IR, TGA, and photoluminescence. In 1, two 2,2′-dpdc ions bridge two Cd(II) ions to form an isolated cluster with Cd?···?Cd distance of 5.023(4)?Å. These clusters are further linked by intermolecular hydrogen bonds, yielding a 2-D supramolecular structure. Complex 2 contains two crystallographically independent Pb(II) ions in the asymmetric unit. Pb1 ions are bridged by 2,2′-dpdc anions to form a chain along the x-axis. Two Pb2 ions are coordinated by two 2,2′-dpdc anions and two pyphen ligands to form a cluster. These clusters are linked by π–π interactions to yield a 1-D supramolecular chain along the y-axis. In 3, neighboring Pb(II) atoms are bridged by 2,2′-dpdc anions to form a 1-D chain structure. Further, the chains are linked into a 3-D supramolecular network through aromatic π–π interactions.     

Ultrasensitive gaseous NH3 sensor based on ionic liquid-mediated signal-on electrochemiluminescence

This work reports that ammonia (NH(3)) can be used as an efficient co-reactant for tris(2,2'-bipyridine)ruthenium(II) (Ru(bpy)(3)(2+)) electrochemiluminescence (ECL) in ionic liquids (ILs), on the basis of which a signal-on ECL sensor for directly detecting gaseous NH(3) has been developed. The NH(3) ECL sensor has a very high sensitivity, with a detection limit of 10 ppt NH(3) (at signal-to-noise ratio of 3) without any preconcentration. The high sensitivity is mainly due to the zero ECL background of Ru(bpy)(3)(2+) in the ILs, strong co-reactant ECL activity of NH(3), and high solubility of NH(3) in imidazolium-based ILs. Additionally, the ECL sensor shows an excellent selectivity against common interfering gases and a wide linear response range from 10 ppt to 10 ppm.     

Electrochemiluminescence of metal-organic complex nanowires based on graphene-Nafion modified electrode for biosensing application

In this work, we chose tris(2,2′-bipyridyl)ruthenium(II)hexafluorophosphate(Ru(bpy)3(PF6)2), a metal-organic complex material,to prepare nanowires, which were subsequently applied for the construction of electrochemiluminescence(ECL) biosensor by immobilizing them onto a glassy carbon electrode(GCE) with graphene-Nafion composite films. The graphene therein, being a two-dimensional carbon nanomaterial with outstanding electronic properties, can obviously improve the conductivity of the Nafion film, as well as enhance the electrochemical signal and ECL intensity of the Ru(bpy)3(PF6)2 nanowires(RuNWs) at low graphene concentration. The developed biosensor exhibited excellent ECL stability with tripropylamine(TPrA) as co-reactant. The ECL biosensor exhibited high sensitive ECL response in a wide linear range and low detection limit for the detection of proline. It is considered that the oxidation products of proline would be responsible for the ECL enhancement. The large electro-active area of the nanowires and the enhancement effect of the graphene played critical roles in the high detection performance of the ECL biosensor. The results demonstrated herein may provide a useful enlightenment for the design of more sensitive ECL biosensors.     

Efficient electrochemiluminescent cyclometalated iridium(III) complexes: Synthesis,photophysical and electrochemiluminescent properties

A series of new cyclometalated iridium(III) complexes for electrochemiluminescence (ECL) system were synthesized and fully characterized. Using tri-n-propylamine (TPA) as an oxidative–reductive co-reactant, their ECL properties were studied in acetonitrile (CH₃CN) and mixed CH₃CN/H₂O (50:50, v/v) solutions, respectively. Meanwhile, the influencing factors of ECL efficiencies, including working electrode, pH, and surfactant were investigated. A remarkable ECL enhancement (up to about 13.5 times), in comparison with the commonly used Ru(bpy)₃²⁺ (2,2′-bipyridyl) ruthenium(II), is observed from Ir(FPP)₂(acac) (where FPP is 2-(4-fluorophenyl)-4-phenylpyridine, acac = acetylacetone) at Pt disk electrode. At the same time, an increase in ECL efficiency is also observed in surfactant media. This study provided a new method for further improving and tuning the ECL efficiency by designing new iridium complexes with the appropriate cyclometalated or ancillary ligands.     

Synthesis,characterization and crystal structure of a chiral polymeric Cu(II) complex bridged by tartrate

A chiral metal-organic coordination polymer, [Cu(Tar)(2,2′-bipy) · 5H₂O] (1) (Tar = L-tartrate dianion, 2,2′-bipy = 2,2′-bipyridine), has been synthesized by hydrothermal reaction of Cu(OAc)₂, Na₂T (H₂T = 2,3-O-isopropylidene-L-tartaric acid) and 2,2′-bipyridine, and characterized by IR, UV–vis spectra, elemental analyses, TG-DTA, and single crystal X-ray diffraction. In the hydrothermal reaction, the protection group isopropylidene for tartaric acid was hydrolyzed. The crystal structure of the coordination polymer 1 shows that each tartrate chelates two Cu(II) ions at opposite ends using one carboxylate oxygen and one hydroxyl oxygen and each Cu(II) ion is chelated by two halves of tartrate dianions, forming coordination polymer chains. Distorted octahedral geometry around copper is completed by a chelating 2,2′-bipyridine molecule. The 2,2′-bipyridine groups in two of parallel 1-D chains are interwoven, constituting ladder-shaped double chains. Strong offset π–π stacking interactions with a face-to-face distance of 3.33 Å for pyridine rings are observed. All the lattice water molecules hydrogen-bond to each other or to the carbonyl oxygen of tartrate, forming a 3-D supramolecular structure.     

Luminescence‐Functionalized Metal–Organic Frameworks Based on a Ruthenium(II) Complex: A Signal Amplification Strategy for Electrogenerated Chemiluminescence Immunosensors

Novel luminescence‐functionalized metal–organic frameworks (MOFs) with superior electrogenerated chemiluminescence (ECL) properties were synthesized based on zinc ions as the central ions and tris(4,4′‐dicarboxylicacid‐2,2′‐bipyridyl)ruthenium(II) dichloride ([Ru(dcbpy)₃]²⁺) as the ligands. For potential applications, the synthesized MOFs were used to fabricate a “signal‐on” ECL immunosensor for the detection of N‐terminal pro‐B‐type natriuretic peptide (NT‐proBNP). As expected, enhanced ECL signals were obtained through a simple fabrication strategy because luminescence‐functionalized MOFs not only effectively increased the loading of [Ru(dcbpy)₃]²⁺, but also served as a loading platform in the ECL immunosensor. Furthermore, the proposed ECL immunosensor had a wide linear range from 5 pg mL^?1 to 25 ng mL^?1 and a relatively low detection limit of 1.67 pg mL^?1 (signal/noise=3). The results indicated that luminescence‐functionalized MOFs provided a novel amplification strategy in the construction of ECL immunosensors and might have great prospects for application in bioanalysis.     

Spectrophotometric Determination of Cadmium(II) Using p,p′‐Dinitro‐SYM‐Diphenylcarbazid in Aqueous Solutions

Abstract

A sensitive and selective spectrophotometric method is proposed for the rapid determination of cadmium(II) using, p,p′‐dinitro‐sym‐diphenylcarbazid, directly in aqueous solution. The reaction between cadmium(II) and p,p′‐dinitro‐sym‐diphenylcarbazid occurs immediately in strong basic media (0.02 N sodium hydroxide solution). The complex shows a maximum of absorption at 630–640 nm, and the absorbance remains stable for at least 24 h. The method allows the cadmium determination over the range 0.5–6.0 µg mL^?1, with a molar absortivity of 2.05×10⁴ L mol^?1 cm^?1 and features a detection limit of 0.13 ppm. The interferences caused by several ions [Ca(II), K(I), Ba(II), Al(III), Pb(II), Zn(II), Cl^?1, NO₃ ^?, SO₄ ^2?], which are present in most of environmental samples, were determined. The validation of the spectrophotometric method was done by recovery test of cadmium(II) in tap water and sea water. The results show that the proposed method has been successfully applied to the determination of cadmium(II) in water samples.     

Application of the reaction between 2,2′-diquinoxalyl and tin(II) or titanium(III) to kinetic determination of copper and iron

The possibility of application was examined of a reaction between 2,2′-diquinoxalyl and tin(II) or titanium(III) to catalytic determination of copper and iron. The reaction parameters, the influence of the hydrogen peroxide concentration, the hydrochloric acid concentration, and the presence of strange ions on oxidation of the reduced form of 2,2′-diquinoxalyl were tested.The usefulness of the established method was proven for the determination of copper(II) and iron(III) ions in the spectrally pure salts, having the concentration range of those ions 10^?4-10^?5%. The sensitivity of the discussed method is of 0.04 μg/ml.     

Electrochemiluminescence from Ru(bpy)3 immobilized in poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate)-poly(vinyl alcohol) composite films

Electrochemical behavior and electrogenerated chemiluminescence (ECL) of tris(2,2′-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) immobilized in poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate)-poly(vinyl alcohol) (PEDOT/PSS-PVA) composite films via ion-exchange have been investigated with tripropylamine (TPA) as the co-reactant at a glassy carbon electrode. The immobilized Ru(bpy)₃²⁺ performed a surface-controlled electrode reaction. The Ru(bpy)₃²⁺ modified electrode showed a fast ECL response to TPA, and was used for the ECL detection of TPA with high sensitivity. The ECL intensity was linearly related to concentrations of TPA over the range from 0.50 μmol L⁻¹ to 0.80 mmol L⁻¹, and the detection limit was 0.10 μmol L⁻¹ (S/N = 3). The as-prepared electrode exhibited good precision and long-term stability for TPA determination.     

Long‐life Heavy Metal Ions Sensor Based on Graphene Oxide‐anchored Conducting Polymer

A long‐life electrochemical sensor for the continuous analysis of heavy metal ions (Zn(II), Cd(II), Pb(II), Cu(II), and Hg(II)) was developed using the graphene oxide (GO) anchored‐functionalized polyterthiophene (poly[3′‐(2‐aminopyrimidyl)‐2,2′:5′,2′′‐terthiophene], polyPATT) composite. The PATT monomer was synthesized and polymerized with GO to form the composite using a potential cycling method, followed by Nafion coating. The modified sensor surface was characterized employing electrochemical and surface analysis methods. Experimental variables affecting the analytical performance were optimized. Interference effects of other metal ions having similar redox potentials were also investigated. The performance of chronocoulometry (CC) without predeposition was compared with the results of square wave anodic stripping voltammetry (SWASV) with predeposition. The dynamic range of CC for the target ions were between 1 ppb and 10 ppm, respectively with the detection limits between 0.05 (±0.05) and 0.20 (±0.15) ppb for the CC method without predeposition, and between 0.08 (±0.05) and 0.30 (±0.12) ppb for the SWASV with 300 sec of deposition time (n=3 ). The reliability of the method was evaluated by continuously analysing environmental water samples using a single sensor probe in a flow system for 93 days.     

Crystallographic and computational study of the structure of copper(II) 2,2′-bis(2-oxidobenzylideneamino)-4,4′-dimethyl-1,1′-biphenyl

The reaction of M(OAc)₂ with 2,2′-bis(2-hydroxybenzylideneamino)-4,4′-dimethyl-1,1′-biphenyl (H₂L1) allows the synthesis of 2,2′-bis(2-oxidobenzylideneamino)-4,4′-dimethyl-1,1′-biphenyl complexes of Cu(II) (CuL1), Co(II) (CoL1) and Ni(II) (NiL1) that were characterized by elemental analysis, FTIR spectroscopy and for CuL1 also by X-ray crystallography verifying a tetradentate binding mode of L1 via an (ONNO) motif of the two phenolic oxygen atoms and two azomethine nitrogen atoms. Recrystallization from a solvent mixture of dichloromethane and methanol promotes the formation of methanol adducts. Different binding modes of the methanol–complex were investigated using density functional theory calculations and binding energies, and thermodynamic data of the interaction are reported. The results show that the favored interaction occurs when the methanol molecule acts as a Lewis acid weakly binding via an O–H···O hydrogen bridge to a phenoxide moiety leading to an elongation of the respective M–O bond.

     

Structural and luminescent properties of a tetranuclear cage-type cadmium(II) carboxylate cluster containing a V-shaped water trimer

The structural characterization of tetranuclear cage-type cadmium(II) carboxylate [Cd₄(2-cpida)₂(2,2′-bpy)₆]·(2,2-bpy)·(ClO₄)·3H₂O (1) (2-H₃cpida = N-(2-carboxyphenyl)iminodiacetic acid, 2,2′-bpy = 2,2′-bipyridine) is described. H-bonding interactions between three lattice water molecules form a V-shaped trimer (H₂O)₃, which is stabilized by 1. In addition, luminescence investigations revealed that 1 shows enhanced emissions as compared with free 2-H₃cpida in the liquid state.     

Optimized spectrophotometric determination of trace cobalt and manganese by their catalysis of the tiron—hydrogen peroxide reaction

A kinetic—spectrophotometric method for the detemination of traces of cobalt(II) and manganese(II) based on their catalytic effect on the tiron—hydrogen peroxide indicator reaction is proposed. Optimal conditions for determination of Co(II) are deduced from response surface studies, considering the sensitivity and the blank absorbance as responses. The detection limit is 0.05 ng Co ml^?1. The Mn(II)-catalyzed reaction was optimized for 1,10-phenanthroline as the activator by the simplex method and for 2,2′-bipyridine as the activator by response surface methodology on the basis of a previously described mechanistic model of the catalytic reaction. In the presence of 2,2′-bipyridine, the detection limit is 0.2 ng Mn ml^?1. The influence of foreign metal ions on both determinations is discussed and is related in the case of the 2,2′-bipyridine—activated Mn(II)-catalyzed reaction with model generated effects of these metal ions.     

Structural and solution studies of new cadmium(II) complexes with 2,2′-diamino-4,4′-bithiazole

Two new Cd(II) complexes, [Cd(DABT)(CH₃COO)₂] (1) and [Cd(DABT)(NO₃)₂] (2), DABT = 2,2′-diamino-4,4′-bithiazole, have been synthesized and characterized by single crystal X-ray crystallography. In 1, each cadmium is chelated by two nitrogens of one DABT and four oxygens of acetate, whereas 2 is a dinuclear complex and there are two Cd's with eight and six coordination: Cd₁O₆N₂ and Cd₂O₄N₂ units. The counter ion effect of the complex formation reaction between cadmium(II) nitrate and acetate with DABT has been studied by spectroscopy. The formation constants of the 1 : 1 and 1 : 2 (metal ion to ligand) complexes were evaluated by computer fitting of the absorbance–mole ratio data.     

Silver(I) ions-enhanced electrochemiluminescence of tris(2,2-bipyridyl)ruthenium(II)

In this paper, we demonstrate an electrochemiluminescence (ECL) enhancement of tris(2,2-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) by the addition of silver(I) ions. The maximum enhancement factor of about 5 was obtained on a glassy carbon electrode in the absence of co-reactant. The enhancement of ECL intensity was possibly attributed to the unique catalytic activity of Ag⁺ for reactions between Ru(bpy)₃³⁺ with OH. The higher enhancement was observed in phosphate buffer solutions compared with that from borate buffer solutions. This resulted from the fact that formation of nanoparticles with large surface area in the phosphate buffer solution exhibited high catalytic activity. The amount of Ag⁺, solution pH and working electrode materials played important roles for the ECL enhancement. We also studied the effects of Ag⁺ on Ru(bpy)₃²⁺/tripropylamine and Ru(bpy)₃²⁺/C₂O₄²⁻ ECL systems.     

Synthesis,characterization, and crystal structure determination of Cu(II) coordination compounds with 2,2′-dimethyl-4,4′-bithiazole

[{CuCl(dm4bt)}₂ μ-Cl)₂] (1) (dm4bt = 2,2′-dimethyl-4,4′-bithiazole) was prepared from the reaction of CuCl₂ · 2H₂O with 2,2′-dimethyl-4,4′-bithiazole in methanol; [Cu(dm4bt)₂NO₃](NO₃) (2) was prepared from the reaction of Cu(NO₃)₂ · 3H₂O with 2,2′-dimethyl-4,4′-bithiazole in methanol. Both complexes were characterized by IR, UV–Vis spectroscopy, and single-crystal structure. The structure of 1 consists of centrosymmetric dimeric [{CuCl(dm4bt)}(μ-Cl)], in which two chloro ligands bridge the coppers forming a four-membered ring; a terminal chloride and a bidentate chelating bithiazole complete five coordination at each Cu(II) in a highly distorted trigonal-bipyramidal geometry. The mononuclear structure 2 consists of a Cu(II), two 2,2′-dimethyl-4,4′-bithiazoles, one monodentate nitrate and one uncoordinated nitrate in a highly distorted square pyramid.     

A redox-mediator pathway for enhanced multi-colour electrochemiluminescence in aqueous solution

The classic and most widely used co-reactant electrochemiluminescence (ECL) reaction of tris(2,2′-bipyridine)ruthenium(ii) ([Ru(bpy)₃]²⁺) and tri-n-propylamine is enhanced by an order of magnitude by fac-[Ir(sppy)₃]³⁻ (where sppy = 5′-sulfo-2-phenylpyridinato-C²,N), through a novel ‘redox mediator’ pathway. Moreover, the concomitant green emission of [Ir(sppy)₃]³⁻* enables internal standardisation of the co-reactant ECL of [Ru(bpy)₃]²⁺. This can be applied using a digital camera as the photodetector by exploiting the ratio of R and B values of the RGB colour data, providing superior sensitivity and precision for the development of low-cost, portable ECL-based analytical devices.

A water-soluble Ir(iii) complex is shown to enhance the ‘remote’ mechanism of the most widely used co-reactant ECL reaction of tris(2,2′-bipyridine)ruthenium(ii) with tripropylamine.