Voltammetric and Spectrophotometric Determination of Nizatidi ne in Pharmaceutical Formulations

 Two methods are described for quantitative determination of nizatidine. The first is a cathodic stripping voltammetric method which is based on the accumulation of the compound at the hanging mercury drop electrode. The adsorptive stripping response was evaluated with respect of accumulation time, potential, concentration, pH and other variables. A linear calibration graph was obtained over the range 3.0×10⁻⁸–1.0×10⁻⁶ M with a detection limit 3.0×10⁻⁸ M after a 20s accumulation time at −0.2 V accumulation potential. On the other hand, it was found that the detection limit could be lowered to 1.0×10⁻⁸ M after 180s accumulation time at −0.2 V accumulation potential. The relative standard deviation was in the range 1.2−2.0% for six measurements. The tolerance amounts of the common excipients have also been reported. The second is a spectrophotometric method which is based on the formation and extraction of the ion-pair complex formed between nizatidine and either bromocresol green or bromothymol blue. The extracted colored ion-pair complexes absorb at 416 nm. The effect of different factors such as: type of organic solvent, pH, reagent concentration, number of extraction times, shaking time, temperature and the tolerance amount of the common excipients have been reported. The calibration graph was linear in the range 6.0×10⁻⁷–1.8×10⁻⁵ M with a detection limit of 6.0×10⁻⁷ M and molar absorptivity of 2.1×10⁴ lċmol⁻¹ċcm⁻¹ when using bromocresol green, while the calibration graph was linear in the range 3.0×10⁻⁷–1.1×10⁻⁵ M with a detection limit of 3.0×10⁻⁷ M and molar absorptivity of 3.2×10⁴ lċmol⁻¹ċcm⁻¹ when using bromothymol blue. The spectrophotometric methods offer alternative methods with reasonable sensitivity, selectivity and accuracy with relative standard deviation in the range 2.1−6.0% and 1.2−4.7% (for six measurements) when using bromothymol blue and bromocresol green, respectively. The proposed two methods were applied for the determination of nizatidine in commercially available dosage forms. A comparison between the voltammetric and the extraction-spectrophotometric methods was also reported. Received April 19, 1999. Revision August 30, 1999.     

Spectrophotometric Determination of Methotrexate and in Pharmaceutical Formulations

Abstract

Methotrexate, 4-amino-10-methyl folic acid, is one of the drugs belonging to the folic acid antagonists that is widely used for the treatment of cancer and psoriasis ^{1, 2}     

Validation of UV Spectrophotometric Method for Fexofenadine Hydrochloride in Pharmaceutical Formulations and Comparison with HPLC

Abstract

A simple, reproducible, accurate, and effective spectrophotometric method was developed and validated for the quantitation of the antihistamine fexofenadine in capsules and coated tablets. Ethanol was used as solvent and the absorbance at the wavelength of 220 nm was employed to the quantitation of the drug. The method validation was fulfilled through the evaluation of the analytical parameters of linearity, precision, accuracy, limits of detection, and quantitation and specificity. The method was linear (r=0.9999) at concentrations ranging from 8.0 to 20.0 µg ml^?1, precise (RSD intra‐day=0.29; 0.18; 0.39; RSD inter‐day=0.12 for capsules and RSD intra‐day=0.13; 0.16; 0.13; RSD inter‐day=0.13 for coated tablets), accurate (percentage recovery=99.97% for capsules and 100.51% for tablets), sensitive (limits of detection and quantitation of 0.10 and 0.29 µg ml^?1, respectively) and specific. The method was compared to a high performance liquid chromatography (HPLC) method, which was previously developed to the same drug. The results showed no significant difference between the methods in fexofenadine hydrochloride quantitation.     

A Novel Spectrophotometric Method for the Determination of Zolmitriptan in Pharmaceutical Formulations

A simple, rapid, cost effective and extraction‐free spectrophotometric method has been developed for the determination of zolmitriptan in pharmaceutical raw and dosage forms. The method is based on the charge‐transfer reaction of zolmitriptan in acetonitrile medium with 0.2% 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone to form a colored product peaking at 555 nm. Beer's law is obeyed in the concentration range 10‐250 μg mL^?1 with molar absorptivity of 1.7 × 10³ L mole^?1 cm^?1. The effects of variables such as reagent concentration, time of reaction, color stability and interferences have been investigated to optimize the procedure. The results have been validated analytically and statistically. The proposed method has been successfully applied for the determination of zolmitriptan in pharmaceutical formulations. Results indicate that the method is accurate, precise and reproducible (relative standard deviation < 2%).     

Spectrophotometric Determination of Lisinopril in Pure and Pharmaceutical Formulations

An accurate, simple, fast, and cheap spectrophotometric method has been developed for the determination of lisinopril in pharmaceutical pure and dosage forms. The method is based on the reaction of ninhydrin with primary amine present in the lisinopril in the presence of DMF. This reaction produces a greenish blue colored product which absorbs maximally at 600 nm. Beer's law was obeyed in the range of 10–150 μg/mL with molar absorptivity of 4.083 × 10³ L mole^?1 cm^?1. The effects of variables such as temperature, heating time, concentration of color producing reagent, and stability of color were investigated to optimize the procedure. The results are validated statistically. The proposed method was applied to commercially available tablets, and the results were statistically compared with the official potentiometric method.     

Flow Injection Spectrophotometric Determination of Dipyrone in Pharmaceutical Formulations Using Fe(III) as Reagent

A flow injection spectrophotometric procedure with symmetric merging zones for dipyrone determination in pharmaceutical formulations is proposed. The determination is based on the formation of a blue complex (monitored at a wavelength of 642 nm) yield in the complexation reaction of dipyrone with Fe(III) in acid medium. Under optimum conditions, a calibration curve was obtained from 3.5 to 281 mg L^?1 with a detection limit of 2.8 mg L^?1 and the samples throughput was 80 h^?1. The analytical results obtained for commercial formulation samples by applying the proposed method were in good agreement with labeled values and those obtained by a comparative procedure at a 95% confidence level.     

Titrimetric and Spectrophotometric Determination of Some Phenothiazine Psychotropics in Pure Form and in Pharmaceutical Formulations with Metavanadate

 Two simple, fast, accurate and precise methods for the determination of six phenothiazines and a number of their pharmaceutical formulations are described. The titrimetric method involves the oxidation of the drugs by metavanadate in sulphuric acid medium and titration of vanadium(IV) formed, with cerium(IV) using ferroin indicator and acetone as catalyst. In spectrophotometry, vanadium(IV) formed was reacted with ferriin and the resulting ferroin measured at 510 nm. Phenothiazines in the ranges 5–100 mg and 2.5–25.0 μg mL⁻¹ can be determined by titrimetry and spectrophotometry, respectively, with detection limits of 0.96–2.05 mg and 0.0359–0.0565 μg mL⁻¹, respectively. Both methods were applied successfully to the determination of the studied drugs in pharmaceutical preparations. The reliability of the assays was established by parallel determination by the official methods of British Pharmacopoeia and the results being statistically evaluated. Received September 26, 2000. Revision March 25, 2001.     

Simultaneous Spectrophotometric Determination of Benzyl Alcohol and Diclofenac in Pharmaceutical Formulations by Chemometrics Method

Diclofenac sodium (DS) is a drug with analgesic, antipyretic, and anti‐inflammatory properties. It is present in numerous pharmaceutical preparations. In injectable forms, it is usually accompanied by benzyl alcohol (BA) as an excipient, which is used as a blocking anesthetic (4%) and an antiseptic (4–10%). In this work a spectrophotometric methodology was applied in order to determine benzyl alcohol and diclofenac in injectable formulations by applying a multivariate calibration method. By a multivariate calibration method such as partial least squares (PLS), it is possible to obtain a model adjusted to the concentration values of the mixtures used in the calibration range. In this study, the concentration model is based on absorption spectra in the 230–320 nm range for 25 different mixtures of benzyl alcohol and diclofenac. Calibration matrix contains 10–95 and 1–50 μg mL^?1 for benzyl alcohol and diclofenac, respectively. The root mean square errors of prediction (RMSEP) for benzyl alcohol and diclofenac were 3.0776 and 1.7557, respectively. The proposed method was validated by using a set of synthetic sample mixtures and subsequently applied to simultaneous determination of benzyl alcohol and diclofenac in two different pharmaceutical formulations.     

An Improved Spectrophotometric Method for Determination of Penicillins Alone and in Pharmaceutical Dosage Forms

Abstract

A new spectrophotometric method for determining penicillins has been developed. A known volume of the penicillin solution is heated at 95[ddot]C for 70 min with ammonium molybdate, in sulphuric acid medium and the absorbance of the blue species formed is measured at 670 nm. The method has been successfully applied for the determination of thirteen commercially available penicillins. Beer's law is valid for up to 35-90 μg/ml of antibiotic (according to the penicillin). The procedure has been used for analysing some pharmaceutical preparations for these drugs, e.g., injections and capsules. The sensitivity of the method is largely increased with respect to the vanadate method previously described.     

Kinetic and Spectrophotometric Determination of Thioctic Acid in Bulk and Pharmaceutical Formulations

Three simple and sensitive spectrophotometric methods were developed for the determination of thioctic acid in bulk and in its pharmaceutical preparations using iron(III) as an oxidizing agent. Method A is based on kinetic investigation of oxidation reaction of the drug with iron(III) and a subsequent chelation of the produced iron(II) with ferricyanide to form prussian blue colored product at room temperature for a fixed time of 15 minutes at 750 nm. Methods B and C are based on oxidation of the studied drug with iron(III). The equivalent iron(II) produced is allowed to react with either o‐phenanthroline or bipyridyl to give colored species measurable at 510, 522 nm, respectively. Regression analysis of Beer‐Lambert plots showed a good correlation in the concentration ranges of 0.4–4 μg/mL with a detection limit of 0.095 μg/mL for method A and 0.5–5 μg/mL with detection limits 0.137 and 0.127 for method B and C, respectively. The three methods were successfully applied for the determination of the drug in its dosage forms. The percentage recoveries were 99.88 ± 1.40, 99.98 ± 1.26 and 100.64 ± 1.07, respectively.     

Spectrophotometric Determination of Tetracyclines in Pure Form and in Pharmaceutical Preparations,by a Molybdenum Blue Method

Abstract

A new and sensitive spectrophotometric method has been developed for the determination of tetracyclines either in a pure form or in Pharmaceuticals, by a molybdenum blue method. The procedure is based on the observation that, in sulphuric acid medium, tetracyclines reduce ammonium molybdate to molybdenum blue, the absorbance of which is proportional to the amount of antibiotic present. The variables affecting development of the color have been investigated and the conditions optimized. Beer's law is obeyed for up to 20 μg/ml of tetracycline HCl and oxytetracycline HCl, 28 μg/ml of demeclocycline HCl, 18 μg/ml of chlortetracycline HCl, 32 μg/ml of doxycycline HCl and 40 μ/ml of rolitetracycline. Molar absorptivities (1 mol^?1 cm^?1) and Sandell's sensitivities (μ cm^?2 per 0.001 absorbance unit) are, respectively: tetracycline HCl 4.9×10⁴ and 0.0098, oxytetracycline HCl 5.4×10⁴ and 0.0092, demeclocycline HCl 1.6×10⁴ and 0.0313, chlortetracycline HCl 5.5×10⁴ and 0.0094, doxycycline HCl 3.4×10⁴ and 0.0141, rolitetracycline 2.7×10⁴ and 0.0195.     

Spectrophotometric Method for the Estimation of Vitamin C in Drug Formulations

Abstract

The use of 1-chloro-2, 4-dinitrobenzene is described for spectrophotometric estimation of ascorbic acid. The procedure is based on the interaction of ascorbic acid with 1-chloro-2, 4-dinitrobenzene in alkaline medium. The product absorbs maximally at 380 nm and has the molar absorptivity 0.14 × 10⁴1 mole^?1cm^?1. Beer's law is obeyed in the concentration range 0.12–0.6 mg/10ml of ascorbic acid.     

Extraction and Spectrophotometric Determination of Neomycin Sulfate in Pharmaceutical Oral Suspensions

Abstract

The conditions of neomycin extraction were studied in pharmaceutical oral suspensions to permit its determination by spectrophotometry after reaction with 2, 4-dinitrofluorobenzene. The best recovery of neomycin was obtained with centrifugation employing water as the extraction agent. The spectrophotometric analysis was carried out in 0.02 M borate buffer (pH 9.0), under ambient conditions after 50 minutes of reaction. The absorbance of the yellow product was measured at 365 nm.     

Spectrophotometric Determination of Antiallergic Drug in Bulk Powder and in Its Pharmaceutical Formulations

Two simple, rapid and selective spectrophotometric methods have been described for the determination of promethazine hydrochloride (PMH) either in pure or pharmaceutical formulations. The methods are based on the formation of a green colored product with sulphanilic acid (SPA) in presence of N-bromosuccinimide (NBS) or a red colored, chloroform soluble product with p-nitroaniline (PNA) in presence of ceric ammonium sulphate (CAS). The chromogen formed has maximum absorption at 600 nm and at 510 nm with SPA and PNA, respectively. The optimum reaction conditions and other analytical parameters are evaluated. Beer's law is valid in the concentration range of 0.5–25 g/mL (R= 0.9983) with SPA and 2–75 g/mL (R = 0.9981) with PNA. Molar absorptivity values as calculated from the Beer's law data are 5.54 × 10³ L/mol/cm and 3.05 × 10³ L/mol/cm for SPA and PNA, respectively. The results are in good agreement with those of the official method. No interference was observed from common pharmaceutical excipients.     

pH-Induced Difference Spectrophotometric Methods for the Determination of Oxyphenbutazone in Some Pharmaceutical Formulations

Abstract

Two pH- induced difference- spectrophotometric procedures for the determination of oxyphenbutazone in pharmaceutical formulations are reported. Both procedures depend upon the sensitivity of the ultraviolet spectrum of oxyphenbutazone towards the pH of the solvent medium. In one procedure, the absorbance difference of oxyphenbutazone in an acid solvent (0.01 NHCl) and in an alkaline one (0.01 N NaOH) is measured at 254 nm; the mean percentage recovery amounts to 100.2±1.23 (p=0.05). The second procedure depends upon measurement of the absorbance difference of the drug in the acid solvent then in a pH 7-phosphate buffer at 262 nm; the mean percentage recovery amounts to 100.1±1.03 (p=0.05). The possible sources of interference in pharmaceutical formulations are studied and the two procedures are adapted to the analysis of some market preparations collected at random.     

Spectrophotometric Determination of Prochlorperazine Maleate in Pure and Pharmaceutical Preparations

 Prochlorperazine maleate reacts with 1-naphthylamine and sodium nitrite, after heating for 110 s at 80 °C to give an orange red colour having maximum absorbance at 460 nm. The reaction is selective for prochlorperazine maleate with 0.01 mg/mL as visual limit of quantitation and provides a basis for a new spectrophotometric determination. The colour reaction obeys Beer’s law from 0.01 mg/10 mL to 0.33 mg/10 mL of prochlorperazine maleate and the relative standard deviation is 0.68%. The quantitative assessment of tolerable amounts of other drugs is also studied. Received September 22, 2000. Revision June 19, 2001     

Spectrophotometric Determination of Phenytoin Sodium in Pure and Pharmaceutical Preparations

 Phenytoin sodium reacts with o-nitrobenzoic acid in alkaline media after heating for 10 minutes at 70 °C, to give a red coloured complex having maximum absorbance at 510 nm. The reaction is selective for phenytoin sodium with 0.01 mg/10 mL as visual limit of quantitation and provides a basis for a new spectrophotometric determination. The colour reaction obeys Beer’s law from 0.01 mg to 3 mg/10 mL of phenytoin sodium and the relative standard deviation is 0.29%. The quantitative assessment of tolerable amounts of other drugs is also studied. Received May 2, 2000. Revision May 11, 2001.     

Development and Validation of Selective Spectrophotometric Methods for the Determination of Pregabalin in Pharmaceutical Preparation

Three simple, quick and sensitive methods are described for the spectrophotometric determination of pregabalin (Pgb) in pharmaceutical preparations. Among them, the first two methods are based on the reaction of Pgb as n-electron donors with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) and 7,7,8,8-tetracyanoquinodimethane (TCNQ) as π-acceptors to give highly colored complex species. The colored products were quantitated spectrophotometrically at 494 and 841 nm for DDQ and TCNQ, respectively. Optimization of the different experimental conditions was conducted. Beer’s law was obeyed in the concentration ranges 2.0—30.0 and 1.5—10 µg•mL－1 for DDQ and TCNQ methods, respectively. The third method is based on the interaction of ninhydrin (NN) with primary amine present in the pregabaline. This reaction produces a blue coloured product in N,N-dimethylformamide (DMF) medium, which absorbs maximally at 573 nm. Beer’s law was found in the concentration range 40.0—180.0 μg•mL－1. The methods were applied successfully to the determination of this drug in pharmaceutical dosage forms.     

N—磷酰化二肽的分光光度法测定

利用双缩脲试剂，在可见光区建立了Ｎ－磷酰化二肽、二肽以及磷酰化多肽的分光光度定量分析方法。在经典的双缩脲分光光度法的实验条件下，观察到Ｎ－磷酰化二肽、二肽与双缩脲试剂的复合物的最大吸收波长均为６２０ｎｍ及Ｎ－磷酰基对二肽有很强的增色作用。     

A New Spectrophotometric Method for the Determination of Maneb in Commercial Formulations

Abstract

A new rapid, selective and sensitive method has been developed for the determination of maneb using pyrocatechol-violet(PV) as chelating reagent in the pH range of 7.5–11.0 in the presence of CTAB producing a complex which shows maximum absorption at 640 nm. Working range of the method is 0.2–3.0 μg ml^?1 maneb (manganese ethylenebisdithiocarbamate). The molar absorptivity of the color system is 79600 1 mol^?1 cm^?1 and Sandell's sensitivity is 0.0033 μg cm^?2. The reproducibility of the method has been checked by the 10 replicate analysis of 15 μg of maneb in 10 ml of solution. The method is quite sensitive and has been applied for the determination of maneb in various commercial samples, crops, grains and synthetic samples.