Trace metal accumulation in tissues of sole (Solea senegalensis) and the relationships with the abiotic environment

The distribution patterns and the organ-specific accumulation trends of 10 trace metals (iron, manganese, zinc, copper, chromium, nickel, cobalt, lead, cadmium and silver) and 4 major elements (sodium, potassium, calcium and magnesium) in 10 different tissues (heart, muscle, kidney, stomach, intestine, liver, gill, gonads, white skin and dark skin) of a benthic fish species (Solea senegalensis) from a densely populated coastal area affected by anthropogenic activities, the Bay of Cadiz (SW Spain), have been investigated. High variability of metal concentrations among tissues were found for Ca, Fe, Zn, Cu, Pb and Ag. Factor analysis was applied to study this variability. Five principal components were found explaining the 92.95% of the total variance and similarities in behavioural patterns of bioaccumulation were described. They associated Mg, Cr, Ni and Mn to intestine and stomach tissues (PC1), Ag, Cu and Cd to liver (PC2), Zn, K and Co to gonads (PC3), Na, Fe and Pb to gill, heart and kidney tissues (PC4) and Ca, Pb and Mn to gill and dark skin (PC5). The metallic concentration in the sediment and water was also studied. The pollution in this area was found moderate with outstanding values of Zn, Cu and Pb (average values of 139, 50.4 and 75.6?mg?kg^?1, respectively) in sediment and dissolved Cu (average value of 2.5?µg?L^?1). Metal bioconcentration trends followed the order Zn?>?Cu?>?Cd?>?Pb for dissolved metals in seawater, Cu?>?Zn?>?Cd?>?Pb?≈?Mn?>?Fe?≈?Ni?≈?Co for metals associated to particulate matter and Zn?≈?Cu?>?Cd?>?Mn?>?Co?≈?Fe?>?Ni?≈?Pb?>?Cr for metals in the sediment. Higher values were found for copper in liver, zinc in gonads and lead in gill, showing the relationship between biotic and abiotic environment. In addition, Cd bioconcentration factors were found high in liver and gill showing the sensitivity of sole to this metal even at low concentrations.     

Screening of dissolved heavy metals (Cu,Zn, Mn,Al, Cd,Ni, Pb) in seawater by a liquid-membrane–ICP–MS approach

A bulk liquid membrane system has been developed and applied to the simultaneous separation and preconcentration of up to seven heavy metals (copper, zinc, lead, cadmium, aluminium, manganese, and nickel) in seawater. Copper was selected to optimize transport conditions and then, under these conditions, the simultaneous extraction of other heavy metals was studied. The system achieved preconcentration yields ranging between 44.11% (Cd) and 77.77% (Cu) after nine hours of operation, the effectiveness of metal transport being Cu > Zn > Pb > Mn > Ni > Al > Cd. The system was applied to the preconcentration of four real seawater samples before their quantification by inductively coupled plasma–mass spectrometry (ICP–MS). Compared with the analytical procedures commonly used for trace metal determination in oceanography, the results obtained demonstrated that the new system may be used as a very clean (sample contamination-free), simple, and one-step alternative for semiquantitative, and even quantitative, simultaneous determination of heavy metals in seawater.     

Simultaneous Determination of Cadmium,Copper, Lead and Zinc in Amino Acid Parenteral Nutrition Solutions by Anodic Stripping Voltammetry and Sample Digestion by UV Irradiation

Abstract

Irradiation with ultraviolet (UV) energy was investigated to assay cadmium, copper, lead, and zinc by anodic stripping voltammetry (ASV) in amino acid parenteral nutrition (PN) solutions. Sample digestion by UV irradiation showed the best performances to liberate the metals from the samples (metal recoveries between 90% and 102%) in comparison with classical oxidative wet digestion methods. The best UV digestion condition was obtained with 1:10 diluted PN samples irradiated during 10 h at 90±3°C with the addition of one aliquot of 50 µL concentrated H₂SO₄ and repeated additions of 50 µL 30% (v/v) H₂O₂ at each 60 min irradiation interval. By using the UV digestion procedure cadmium, copper, lead, and zinc were simultaneously assayed in commercial amino acid PN solutions by ASV. The metal concentrations ranged between 1.3 to 4.4 for cadmium, 2.9 to 40.8 for copper, 4.4 to 16.8 for lead, and 1.4 to 208.5 for zinc. The ASV method correlated well with atomic absorption spectrometry measurements to assay the investigated analytes in amino acid PN samples after the UV digestion.     

Analysis of Tea for Metals by Flame and Graphite Furnace Atomic Absorption Spectrometry with Multivariate Analysis

The concentrations of iron, zinc, manganese, copper, chromium, nickel, lead, arsenic, and cadmium were determined using flame and graphite furnace atomic absorption spectrometry in nine herbal tea samples. Hawthorn, yarrow, elderflower, and bearberry are herbal teas for which the metal content has been rarely determined. The concentration of cadmium in St John’s wort exceeded the maximum permissible limit of 0.3?mg/kg. The metals were also determined in aqueous extracts following 5, 10, and 20?min of boiling and using different preparations, including acidification with lemon juice. The influence of these factors on metal release was demonstrated using multivariate analyses by redundancy analysis and principal component analysis. The metal release was not considerably affected by the boiling time, while the acidity of the medium was generally positively correlated. For the infusions, arsenic was detected only in acidified mint tea. The extraction efficiencies of metals were determined and classified as highly, moderately, and poorly extractable, with chromium showing largest variations.     

Heavy metal content of a medicinal moss tea for hypertension

The content of various heavy metals (arsenic, cadmium, chromium, copper, iron, lead, mercury, nickel, manganese and zinc) in the moss species Rhodobryum ontariense (Kindb.) Kindb. and its tea are presented in this study. Pursuant to the use of this tea in traditional Chinese medicine for hypertension, the aim of this study was to examine its safety in regard to the metals. All heavy metals were determined by adequate EPA methods. The concentrations of all metals for daily intake in its tea were below the safety levels for human consumption. These results indicate the importance of manganese in R. ontariense tea traditionally used for hypertension and other heart disorders.     

微波消解-电感耦合等离子体原子发射光谱(ICP-AES)法测定含铜污泥中多种重金属

为了填补现有方法的技术空白,本方法采用微波消解和电感耦合等离子体原子发射光谱法（ ICP-AES）相结合,实现对含铜污泥中铅、锌、铬、镉、砷、镁、铝、锑量的同时测定。首先采用盐酸-硝酸-氢氟酸微波消解进行样品的前处理,消解后加入高氯酸置于电热板进行除碳并赶酸,溶样效果理想,且有效避免了高温溶样对易挥发元素砷、锑的损失,整个过程安全、高效、无损。溶样后以电感耦合等离子体发射光谱法（ ICP-AES）进行测定。对含铜污泥的分解方法进行了合理选择,并对测定时的元素分析谱线及各测定元素间干扰情况等进行了讨论。该方法的加标回收率在95.31%~107.28%%,相对标准偏差（RSD）在0.31%~2.05%之间（n=7),结果表明,该方法准确度高,操作简单快捷,可同时测定多种元素,能满足批量的测定含铜污泥中铅、锌、镍、铁、镉、铬、砷、锑含量的测定要求。     

Organic complexation and total dissolved trace metal analysis in estuarine waters: comparison of solvent-extraction graphite furnace atomic absorption spectrometric and chelating resin flow injection inductively coupled plasma-mass spectrometric analysis

The measured concentrations of cadmium, cobalt, copper, nickel, lead, zinc, and manganese in acidified (pH<2) estuarine water samples analyzed for total dissolved trace metal concentrations using on-line chelating resin column partitioning with inductively coupled plasma-mass spectrometry (CRCP-ICP-MS) were compared to those analyzed by graphite furnace atomic absorption spectrometry (GFAAS) after liquid-liquid extraction using a combination of 1-pyrrolidinedithiocarbamate/diethyldithiocarbamate (PDC/DDC). Although there was good agreement between the two sets of analyses for cadmium, lead, manganese, and zinc concentrations, those of cobalt, copper, and nickel determined by CRCP-ICP-MS were found to be 10-20% lower than those determined by solvent-extraction GFAAS. The different yields were positively correlated (R>0.961, simple linear regression) to the dissolved organic carbon (DOC) concentration of the samples. Good agreement between the two methods for cobalt and copper was achieved after ultraviolet (UV) digestion of the acidified samples. Samples collected from the South Bay of the San Francisco Estuary with high DOC showed the greatest difference for cobalt, copper, and nickel which is tentatively attributed to complexation with humic material for copper and cobalt and strong synthetic chelating agents such as ethylenediaminetetraacetic acid (EDTA) for nickel. This is consistent with previous studies on copper, nickel and cobalt complexation in this region. We recommend UV digestion of acidified estuarine samples prior to multi-element analysis by chelating resin flow injection ICP-MS methods.     

Glucose oxidase inhibition in poly(neutral red) mediated enzyme biosensors for heavy metal determination

A biosensor for the determination of heavy metal cations based on glucose oxidase enzymatic inhibition has been developed. The biosensor was assembled on carbon film electrode supports with glucose oxidase immobilised by cross-linking with glutaraldehyde on top of a film of poly(neutral red) as redox mediator, prepared by electropolymerisation. The biosensor was used to determine the metallic cations, cadmium, copper, lead and zinc in the presence of chosen amounts of glucose. The detection limits were found to be 1 μg L^?1 for cadmium, 6 μg L^?1 for copper, 3 μg L^?1 for lead and 9 μg L^?1 for zinc. Inhibition constants were determined by using the Dixon plot, and the type of inhibition induced by the metallic cations was evaluated from Cornish-Bowden plots plus Dixon plots, it being found that the inhibition is reversible and competitive for cadmium, mixed for copper and lead and uncompetitive for zinc. Copper-inhibited glucose oxidase to a greater extent followed by cadmium, lead and zinc. Regeneration of the glucose oxidase response was studied by using Ethylene diamine tetracetic acid metal-chelating agent and the nonionic surfactant Triton X-100. The suitability of the biosensor for determination in foodstuffs or beverages which contain trace concentrations of metals was investigated by performing recovery tests in commercial milk samples.     

Effects of various elements on arsenic accumulation of the alga Dunaliella salina

The effect of 23 various elements (nitrogen, manganese, magnesium, molybdenum, zinc, selenium, gallium, nickel, cobalt, lithium, strontium, vanadium, tin, antimony, bismuth, cadmium, chromium, lead, iron, silver, copper, potassium and calcium) in water on growth and arsenic accumulation in Dunaliella saline was investigated. The order of growth inhibition of D. salina by these elements was Ag>Cd>Co>Ni>Cu>Zn>Fe>Sb>Ga>Cr>Bi>Sr>Mn>Sn>Se>Pb>V>Ca, Mg, Mo, K, Li. Arsenic accumulation in D. salina was unaffected by an increase in calcium and chromium. Also, the arsenic content in D. salina decreased at a potassium concentration of 100 mg dm^?3, and was also reduced by the addition of cadmium and nitrogen; however, it was increased by the addition of lithium at 100 mg dm^?3, tin, gallium, bismuth, strontium, vanadium, iron and manganese at 10 mg md^?3, lead, antimony, zinc, copper cobalt and nickel at 1 mg dm^?3, selenium at 0.1 mg dm^?3, and silver at 0.005 mg dm^?3, respectively. These results imply that arsenic accumulation by D. salina depends upon biological activity and physical adsorption.     

利用旋风炉玻璃化处理垃圾焚烧飞灰实验研究

在自行设计的旋风炉实验台上对焚烧飞灰进行玻璃化熔融实验,系统研究了焚烧飞灰熔融前后微观形貌、灰渣中重金属特性和浸出特性。实验结果表明,焚烧飞灰旋风熔融后成黑色的脆硬玻璃态熔渣,表层呈浅黄色。在熔渣中N i、Cr的固溶率最高,均超过95%以上;低熔点重金属多数挥发至熔融烟气和熔融烟道飞灰颗粒中,Cd的固溶率仅有21%,Pb和Zn部分固溶于玻璃态熔渣中,两者固溶率可达42%以上。Cu和As的固溶率分别为37%和18%。熔融后的玻璃态熔渣重金属浸出率明显低于熔融前的焚烧飞灰,且均低于美国EPA的标准限值。     

Analyse de la fraction labile du zinc,cadmium, plomb et du cuivre dissous en milieu marin côtier par la redissolution anodique à impulsions différentielles

Analysis of the labile fraction of zinc, cadmium, lead and copper dissolved in the coastal marine environment using differential pulse anodic stripping voltammetry. The determination of the optimal experimental conditions for the dosage of labile concentrations of heavy metals such as cadmium, copper lead and zinc, in a coastal marine environment has been performed. The method used was differential pulse anodic stripping voltammetry (DPASV) with hanging mercury drop. To cite this article: M. El Makhfouk et al., C. R. Chimie 6 (2003).     

Application of Total Reflection X-Ray Fluorescence Spectrometry in the Textile Industry

 In the present study, the determination of arsenic, lead, cadmium, chromium, cobalt, copper, nickel, mercury and zinc in various cloth samples produced in Kayseri-Turkey was performed after extraction with artificial sweat solution and decomposition with nitric acid. TXRF is shown to be suitable for the determination of 7 trace elements, down to the 0.001 (cobalt) to 0.004 (copper) mg/kg level in textile extract except for mercury and cadmium. The extractable part of the toxic metals by artificial sweat solution is relatively low. In a few extracts the concentration values of Pb and Ni have exceeded their critical values of 0.2 mg/kg for lead and 1.0 mg/kg for nickel given by ?ko-Tex and determined for babys cloths. In addition, it was observed that the element pattern of textile samples resembled ‘finger print type’, TXRF-spectra. This technique can also be used for the identification of textile sample in forensic investigation. Received April 16, 2001 Revision October 1, 2001.     

Use of microwave digestion for estimation of heavy metal content of soils in a geochemical survey

A procedure for the rapid and safe analysis of soils with widely differing organic matter contents has been investigated and validated. Surface soils, totalling 295 and sampled on a grid basis, representing 22% of the land-base of the Republic of Ireland, have been analysed for cadmium, chromium, copper, nickel, lead and zinc. Soil concentrations of cadmium, chromium, lead and nickel exhibit patterns of regionalised elevation. Implications of this elevation are considered in relation to sewage sludge application to land, future requirement for baseline surveys and concerns over concentrations in food products.     

Evaluation of serum metal profile in relation to biri smoking using ICP-MS

The metals intake through tobacco smoking is associated with adverse effects for human health. The present study was aimed to understand the effects of biri smoking on smoker’s serum metal profile. Seven metals, cadmium (Cd), nickel (Ni), lead (Pb), chromium (Cr), copper (Cu), iron (Fe) and zinc (Zn), were analysed in serum samples of 20 biri smokers and 20 non-smokers from North India. The Cd, Ni, Pb, Cr and Cu concentrations were higher while Fe and Zn concentrations were lower in smokers compared to non-smokers. The Fe concentrations, the highest among all metals, seemed to be unassociated with the smoking activity. This study indicated that biri smoking is a contributor to the body burden of Cd, Ni, Cu and Cr in the smoker’s body. The Cd, Ni, Cu and Fe concentrations are non-significantly associated with the age of smokers at p < 0.01 significance level, whereas Pb and Cr concentrations increase and Zn concentrations decrease with the increase in the age of smokers. Serum metal concentrations in the smoker subjects of North India are higher compared to the results of other similar studies. This could be linked to the poor quality of tobacco used in biri. We recommend conducting more detailed and controlled studies in this regard as a smoker is also subjected to other sources of exposure to metals.     

The extraction of divalent cobalt,copper, zinc,and cadmium from hydrochloric acid solutions by tri-n-octyl phosphine oxide

The partitions of divalent cobalt, copper, zinc and cadmium between hydrochloric acid solutions and solutions of tri-n-octyl phosphine oxide (TOPO) in benzene or kerosene have been investigated under different conditions. Further the absorption spectra of both the aqueous and organic phases have been examined, and the infra-red spectra of the organic phases have been studied. As a result, it is found that the order of the extraction efficiency of TOPO for divalent metals is Zn > Cd > Cu > Co at low aqueous acidity; Zn > Cd > Co > Cu at higher acidity. The mechanism of extraction is discussed on the basis of the results obtained.     

Dithizone-modified nanoporous fructose as a novel sorbent for solid-phase extraction of ultra-trace levels of heavy metals

We are introducing nanoporous fructose (np-F) modified with dithizone as a new solid-phase for extraction of heavy metals ions including cadmium(II), copper(II), nickel(II) and lead(II). Effects of pH value, flow rates, type, concentration and volume of the eluent, breakthrough volume, and of other ions were studied. Under optimized conditions, the extraction efficiency is >97 %, and the limits of detection are 0.025, 0.15, 0.5 and 1.2 ng mL^?1 for the ions of cadmium, copper, nickel, and lead, respectively, and the adsorption capacities for these ions are 101, 81, 74 and 178 mg g^?1. The modified np-F sorbent was characterized by thermogravimetric analysis, differential thermal analysis, transmission electron microscopy, Fourier transform infrared spectrometry, X-ray diffraction, and nitrogen adsorption surface area (BET) measurements.

微波消解-ICP-MS测定电镀污泥中的重金属

采用微波消解系统对某电镀污泥进行消解,利用ICP-MS对污泥中的重金属进行测定。称取制备后样品,置于消解罐中充分反应后,赶酸、定容后利用电感耦合等离子体质谱法进行测定。电镀污泥中的铬为18845.2mg/kg、镉为10.3mg/kg、镍为5200.0mg/kg、铅为189.7mg/kg、铜为3271.7mg/kg、锌为49632.6mg/kg。测定结果表明所检测项目工作曲线线性关系好,相关系数r均大于0.999。铬加标回收率在91.6～97.7%之间、镉加标回收率在92.0～97.0%之间、镍加标回收率在95.1～98.0%之间、铅加标回收率在94.3～95.2%之间、铜加标回收率在97.1～102%之间、锌加标回收率在96.3～98.7%之间,均满足相关测定要求。计算的潜在生态危害系数、潜在生态危害指数结果表明,电镀污泥中的铬、镉、铅、铜、锌为轻微生态危害,镍为强生态危害;潜在生态危害指数RI计算值为216.69,属于中等生态危害。     

Interference between selenium and some trace elements during polarographic studies and its elimination

When selenite was added into solutions of some ions such as copper, lead, cadmium, zinc, chromium and arsenic their DPP peak decreased. This kind of interference was observed in all acids and in wide range of pH values, causing at least 50% error when both ions (the ion present and selenite) were in similar quantities. It was found that this interference was not taking place at pH 8.5 in the presence of large amounts of selenite. A synthetic sample containing these elements in 10⁻⁵ M in the presence of 50 times selenite has been analyzed at pH 8.5 without any interference. The detection limit in this medium was 3 × 10⁻⁷ M for cadmium and lead, 1 × 10⁻⁶ M for copper and zinc and it was 3 × 10⁻⁷ M for selenite.     

The determination of metals at ppb levels by thin-film x-ray fluorescence spectrometry after coprecipitation with a molybdenum carrier complex

A method is described for the determination of iron, cobalt, nickel, copper, zinc, cadmium and lead in water at μg 1^-1 levels, in which the metals are coprecipitated with a molybdenum—pyrrolidinedithiocarbamate carrier complex. The precipitate is collected as a thin film on a membrane filter (0.4-μm pore-size) and analysed directly by x-ray fluorescence spectrometry. Detection limits, for 100-ml water samples and counting times of 200 s per element, are 1 μg metal l^-1 or lower. Total dissolved metal concentrations are obtained without boiling or u.v. irradiation of the water sample. The method is applicable to river and estuarine waters and is not affected by dissolved organic matter.     

Field procedures to assess soils and waste disposals

The aim of this research was the development of rapid analytical test methods for arsenic, lead, cadmium, chromium(VI), copper, nickel, and zinc to classify waste materials into waste classes and assess contaminated soils for purification purposes. In order to estimate the danger potentials of contaminated soils, a rapid ecotoxicological method was developed (A. Götzl, H. Malissa, W. Riepe, FACT 3 (6) (1999) 329.). These rapid analytical and ecotoxicological tests offer an instrument to comprehensively assess soils and wastes. The developed rapid methods are suitable for the elution of different soils and wastes, the analysis of the eluates and also for waste waters with concentrations greater than 0.1 mg l⁻¹ arsenic, 0.5 mg l⁻¹ lead, 0.01 mg l⁻¹ cadmium, 0.1 mg l⁻¹ chromium(VI), 0.3 mg l⁻¹ copper, 0.5 mg l⁻¹ nickel and 0.1 mg l⁻¹ zinc in the eluate. Our developed rapid analytical test methods described below can be implemented on site, are of low cost and are not time-consuming (about 30 min). They also do not need to be carried out by highly qualified specialists only, they can also be easily applied by persons with some experience. The comparability of results obtained using the developed rapid test method and standardised methods was tested with various matrices.