Adsorptive Voltammetric Measurement of Trace Level of Iron(III) with 4–(2–Pyridylazo) Resorcin

Abstract

The polarographic behavior of the complex of iron–4– (2–pyridylazo) resorcin(PAR) was studied. In HAc– NaAc– EDTA buffer solution, the complex can be adsorped on a hanging mercury drop electrode giving a sensitive adsorptive complex reduction peak with a peak potential at -0.36V(vs. SCE). Optimum experimental conditions were found by the use of 0.08mol/L HAc, 0.06mol/L NaAc, 5.0 × 10^?3mol/L EDTA and 1.0 × 10^?5mol/L PAR. With preconcentration for 60s, the derivative peak height of the complex compound is linearly proportional to the concentration for Fe in the range from 1.0 × 10^?9mol/L to 1.0 × 10^?7mol/L. For a 2–min pre–concentration time, the detection limit found was 2.0 × 10^?10mol/L. This method has high sensitivity and selectivity. It has been applied to the determination of trace iron in food and water samples without any pre–separation step.     

Electrochemical and Spectroscopic Studies on the Interaction of Gallocyanine with DNA

The interaction of gallocyanine (GC) with double‐stranded DNA (dsDNA) in pH 3.5 Tris‐HCl buffer solution was investigated by electrochemical methods and spectrophotometric methods as well. In the potential scan range of ‐0.25 ? +0.18 V(vs. SCE), GC had a couple of well‐defined redox peaks at ‐0.022 V and ‐0.069 V on a cyclic voltammogram at the scan rate of 100.0 mV/s, respectively. After the addition of dsDNA into the GC solution, the redox‐peak currents decreased obviously and the peak potentials shifted positively. The results demonstrated that GC binding to DNA was caused by intercalation. Electrochemical parameters such as the electron number (n), the charge transfer coefficient (α) and the electrochemical reaction standard rate constant (k_s) were calculated and compared in the absence and presence of dsDNA. Almost unchanged values of the electrochemical parameters after adding dsDNA showed that non‐electroactive complexes were formed when GC interacted with DNA. The results indicated that the decrease of the redox‐peak currents was caused by the decrease of the free concentration of GC in the reaction solution. The binding constant and binding ratio were investigated by spectrophotometric methods. DNA concentration can be determined by the decrease of the peak current of GC. The linear range for dsDNA was in the range of 1.45 × 10^?7 ? 1.45 × 10^?6mol/Land 1.45 × 10^?6 ? 1.45 × 10^?5 mol/L, respectively with the linear regression equation as Δi_P (10^?7 A) = 0.037 + 0.018C (10^?7mol/L), and Δi_P (10^?7 A) = 0.25 + 0.041C (10^?6mol/L), respectively, and the detection limit (3σ) was 1.13 × 10^?7 mol/L.     

Electrochemical Behavior of 6-Mercapto-Purine at Hanging Copper Amalgam Dropping Electrode and Its Trace Determination by Differential Pulse Adsorption Cathodic Stripping Voltammetry

Abstract

The electrochemical behavior of 6-MP was studied by cyclic voltammetry at a hanging copper amalgam dropping electrode (HCADE). It was found that 6-MP could form a complex with the Cu(II) stripped from the HCADE, showing a new peak at ?0.19V in the medium of 0.1mol/L LiClO₄-0.5mol/L HClO₄ solution. The mechanism of the reaction was proposed. This new peak was sensitive and could be used for the determination of trace 6-MP by differential pulse adsorption cathodic stripping voltammetry (DPAdCSV). The linear range was from 3.6×10^?10 to 5.3×10^?6 mol/L, and the detection limit was about 1.2×10^?10 mol/L (S/N=3). The method was also successfully applied to the determination of 6-MP in pharmaceutical tablets.     

Adsorptive Stripping Square-Wave Voltammetry of Creatine

ABSTRACT

An adsorptive stripping square-wave voltammetric method for quantitative determination of creatine is developed. The basic redox properties of creatine are investigated by means of square-wave and cyclic staircase voltammetry. Creatine undergoes an irreversible reduction in neutral and acidic medium at a hanging mercury drop electrode. The square-wave voltammetric response of creatine depends on the parameters of the SW excitation signal as well as on the concentration and type of the supporting electrolyte, the accumulation time and the potential and pH of the medium. The optimal experimental conditions for quantitative determination of creatine are as follows: supporting electrolyte 0.1 mol/L KNO₃ buffered with 0.1 mol/L acetate buffer to pH = 4 and accumulation potential -1.2 V. The optimal SW parameters found are: frequency f = 120 Hz, amplitude E _sw = 30 mV, and scan increment dE = 4 mV. A detection limit of 6.6 x 10^?8 mol/L creatine was obtained after 30 s preconcentration period at accumulation potential -1.2 V. The correlation coefficients of the calibration curves at concentration levels of 10^?7 to 10^?5 mol/L creatine are greater than 0.99. The results of recovery tests range from 92.18% to 102.51%.     

Analytical Study of New Creatininium and Tetramethyl-ammonium Cation Selective Membrane Electrodes

Abstract

Two new liquid membrane electrodes which respond to creatininium and tetramethylammonium cations are described. The creatininium cation electrode exhibits rapid and near Nernstian response to creatininium cation activity, at pH 3, in the 10^?3?10^?1 mol/L range. The useful concentration range extends to 10^?4 mol/L. The tetramethyl-ammonium cation electrode exhibits rapid and near Nernstian response to tetramethylammonium cation activity, at pH 2–11.5, in the 2x10^?5? 10^?1 mol/L range. Major interferences for the creatininium electrode are Na⁺, K⁺, NH⁺ ₄ and creatine. The pK_a of the creatininium cation was calculated. A method is described for the potentiometric precipitation titration of tetramethylammonium cation with sodium tetraphenylboron. Amounts of tetramethylammonium in the range 20–200 μol have been determined using Gran's plots, with an average error of about 0.6%.     

Captopril Modified Silver Electrode and Its Application to the Electroanalysis of Hemoglobin

Abstract

Captopril, 1-[(2S)-3-mercapto-2-methyl-1-oxopropyl]-L-Proline, can be deposited onto a silver electrode by a covalent bonding method to give a long-lived and stable chemically modified electrode(CME). Since the CME is prepared with a reaction between captopril and the substrate silver, the CME being prepared by this method is very stable. Furthermore, Hemoglobin(Hb) exhibits excellent voltammetric response at the modified electrode. Differential pulse voltammetric(DPV) measurements of the protein with this CME reveal the existence of a linear relationship between the anodic peak current and the concentration of Hb in the range of 2×10^?6 ～ 5×10^?5 mol/L. The detection limit is 8×10^?7 mol/L and the relative standard deviation of results is 5% for 6 successive determinations at 2×10_-5 mol/L. The determination of Hb for a real example is carried out.     

6th International Conference on Flow Analysis

Abstract

The 2.5th order differential polarographic reduction behavior of malonaldehyde (MLD) was studied. A sensitive measurement method of the determination of MLD for biological samples was given by using differential voltammetry with a static mercury drop electrode at a scanning speed of 80mV/s in a solution of 0.1mol/L NH₄Cl. The linear response range of current(e″) against the concentration of MLD was 1.0×10^?6 to 1.0×10^?3 mol L and the detection limit was 1.0 × 10^?7mol/L. The contents of MLD in the sample of cardiac myocytes was determined rapidly and simply by means of the method.     

Direct Electrochemistry of Hemoglobin at Silver Electrode Modified by Lipoic Acid Monolayer

Abstract

The direct electrochemistry of hemoglobin (Hb) was studied by cyclic voltammetry(CV) and flow injection analysis(FIA) on a silver electrode modified by a self-assembled monolayer of lipoic acid(LA). Lipoic acid molecules can strongly adsorb onto the Ag electrode surface through the cleavage of the S-H bond and the formation of the Ag-S bond. The observed adsorption coverage of LA demonstrates that the LA molecules spontaneously form a self-assembled monolayer. Experimental data show that LA can promote the redox process of Hb at the modified electrode surface. This chemically modified electrode (CME) exhibits good stability in the CV and FIA. Linear sweep voltammetric measurement of Hb at the CME reveals a linear relationship between the oxidative peak current and the concentration of Hb in the range of 5.0×10^?7-1.5×10^?5 mol/L. The relative standard derivation (RSD) for six replicate measurements of 5.0×10^?6 mol/L Hb in FIA is 2.8%. The detection limit is 2.0×10^?7 mol/L. The reaction mechanism involves the hydrogen bond/ salt bridge formation between the carboxylate of LA and the protonated lysine residues of Hb that can enhance the electron transfer reaction. It can be used to detect Hb in real examples.     

Direct Determination of Labile Monomeric Aluminum in Natural Waters By A.C. Oscillopolarography in the Presence of Rubeanic Acid

ABSTRACT

A simple and sensitive electrochemical method for the direct determination of labile (monomeric inorganic Al speciation) Al concentration in natural waters is developed in this paper. It is based on the use of a.c. oscillopolarography in the presence of rubeanic acid (RA). The optimal experimental conditions are: 1 mol/L NaAc-HAc buffer (pH 5.4) and a RA concentration of 6x10^?4 mol/L. The response is linear over the 2x10^?7 to 2x10^?6 mol/L concentration range. The detection limit is 1x10^?7 mol/L and the relative standard deviation (at the 1.2 x 10^?6 mol/L level) is 5.5%. The method has been applied to the direct determination of labile monomeric Al concentrations in various natural samples. The results were verified by the classic ion exchange method.     

Study and Application of Polarographic Catalytic Wave of Chlordiazepoxide in the Presence of Persulfate

ＩｎｔｒｏｄｕｃｔｉｏｎＣｈｌｏｒｄｉａｚｅｐｏｘｉｄｅ (7 ｃｈｌｏｒｏ 2 ｍｅｔｈｙｌａｍｉｎｏ 5 ｐｈｅｎｙｌ 3Ｈ 1,4 ｂｅｎｚｏｄｉａｚｅｐｉｎｅ 4 ｏｘｉｄｅ)ｓｈｏｗｉｎｇｐｏｗｅｒｆｕｌａｎ ｔｉａｎｘｉｅｔｙｅｆｆｅｃｔｈａｓｂｅｅｎｗｉｄｅｌｙｕｓｅｄａｓａｐｓｙｃｈｏｔｈｅｒａｐｅｕ ｔｉｃｄｒｕｇ .Ｃｏｎｓｅｑｕｅｎｔｌｙ ,ｔｈｅｎｅｅｄａｒｏｓｅｆｏｒｓｅｎｓｉｔｉｖｅａｎｄｒａｐｉｄｄｅｔｅｒｍｉｎａｔｉｏｎｏｆｃｈｌｏｒｄｉａｚｅｐｏｘｉｄｅｉｎｂｌｏｏｄ ,ｕｒｉｎｅａｎ…     

L-Cysteine Modified Silver Electrode and Its Application to the Study of the Electrochemistry of Hemoglobin

Abstract

L-cysteine can be modified onto a silver electrode by covalent binding through the sulphur to give very stable and long-lived chemically modified electrodes(CMEs). Hemoglobin(Hb) exhibits an excellent voltammetric response at the resulting CMEs. Linear sweep voltammetric(LSV) measurements of Hb on the CMEs reveal the existence of a linear relationship between the cathodic peak current and the concentration of Hb in the range of 5 X 10^?7 - 1 X 10^?5 mol/L. The detection limit is about 2 X 10^?7 mol/L. The relative standard deviation of results is 4.5% for 10 successive determinations at 2 X 10^?6 mol/L. Other proteins and chemicals present in samples do not interfere in the assay.     

Chemiluminescence Determination of Sulfite and Sulfur Dioxide Using Tris(1,10-Phenanthroline)Ruthenium-KMnO4 System

Abstract

The emission produced by sulfite after oxidation by potassium permanganate in acidic solution in the presence of Ru(phen)₃ ²⁺ is used to determine 1.0 × 10^?7 to 2.5 × 10^?5 mol/L sulfite. The limit of detection is 4.5 × 10^?9 mol/L and the relative standard deviation is 3.1% for a 1 × 10^?5 mol/L sulfite solution (n=8). The method was also applied satisfactorily to the determination of sulfur dioxide in air by using triethanolamine (TEA) as absorbent material.     

Investigations on Adsorption Potentiometry Part V Derivative Adsorption Chronopotentiometry of Beryllium(II)-4-[(4-diethylamino-2-hydroxypheanyl)-azo]-5-hydroxy-naphthalene-2,7-disurphonic Acid System

Abstract

An electroanalytical methood, based on derivative chronopotentiometry of the complex of beryllium(II) with 4-[(4-diethylamino-2-hydroxy-phenyl)-azo]-5-hydroxy-naphthalene-2,7-disurphonic acid (Beryllon II) accumulated adsorptively on the surface of a hanging mercury drop electrode, has been developed for determining trace beryllium in food. The dependences of the peak height on the dt/dE vs. E curve on the pre-concentration time, preconcentration potential and the constant reducing current are discussed. In 0.15 mol/1 NH_s+0.05 mol/1 NH₄Cl, 4×10^?7 mol/l Beryllon II, and at a preconcentration potential of -0.30 V (ve. SCE), the limit of detection and linear range are 1 × l0^?10 mol/l and 3 × 10^?10 -2 × l0^?7 mol/l, Iwpectively. The relative standard error of the method is 2.3% for 6 × 10^?8 mol/l Be(II). The method WBB applied to samples of food. The electrode procees hae been diecueeed.     

Voltammetric Determination of L‐Dopa Using a Carbon Nanotubes‐Nafion Modified Glassy Carbon Electrode

Abstract

A method for determination of L‐dopa by the adsorption stripping voltammetry (ASV) using a multiwalled carbon nanotubes (MWNTs)–Nafion modified glassy carbon electrode (GMGCE) was proposed. This chemically modified electrode (CME) shows a better stability. A sensitive oxidation peak was observed and the anodic peak potential is ca. 0.374V (vs. SCE). The influences of various experimental parameters on the current peak were completely studied. Under the optimized condition, the method has been applied to the determination of L‐dopa in samples. There is a good linear relationship between the peak current (i_p) and L‐dopa concentration in the range of 3.5×10^?7～1.5×10^?5 mol/L, with the limit of detection 5.0×10^?8 mol/L.     

Studies on Polarographic Adsorptive Wave of the System of the Rare Earth (III)-Copper(Ii)-M-Trifluomethyl Chlorophosphonazo

Abstract

A new heteronuclear complex, rare earth (III)-copper (II)-m-trifluomethyl chlorophosphonazo (CPA-mCF₃) system for determining trace rare earth ions is presented. In a medium of 0.02mol/L NH₄Cl,1. 0×10^?3mol/L Cu(II),1.0×10^?5 mol/L CPA-mCF₃, a very sensitive polarographic adsorptive wave is observed by using a single sweep oscillopolarograph at about –0.83V (vs. Ag/AgCl). The linear relationship between the peak current and the concentration of rare earth exists from 6. 0×10^?9 to 1. 0×10^?6 mol/L. The detection limit of rare earth is down to 2. 0×10^?9 mol/L for Tm³⁺. This method has been applied to determine trace RE in several samples of Chinese tea. The results are satisfactory. The composition of the complex is detected as RE (II): Cu (II): CPA-mCF₃ = 1: 1: 2.     

Methylene Blue Poly(Vinyl Chloride) Membrane Electrode Based on the Methylene Blue-Teteraphenylborate Ion-Pair Complex and Its Application to Pharmaceutical Analysis

Abstract

A methylene blue (MB) poly (vinyl chloride) membrane electrode based on MBtetraphenylborate (TPB) ion-pair complex is described. The linear response covers the range 1x10^?2 - 1x10^?6 mol dm^?3 MB solution, with a slope of 56.5±0.5 mv/decade (pH range 3.0-1 0.0). The detection limit is 7.75x 10^?7 mol dm^?3. The electrode shows stability, good reproducibility and fast response. Interferences from common inorganic cations and some organic bases are negligible. These characteristics of the electrode enabled it to be used successfully for the determination of MB in injection.     

Investigations on Bioanalytical Chemistry Part I. On Differential Pulse Voltammetry of Bilirubin

Abstract

The electrochemical behaviour of the bilirubin in many kinds of supporting electrolytes on a glassy carbon electrode (GCE) and a hanging mercury drop electrode (HMDE) was investigated by means of anodic or cathodic differential pulse voltammetry. The influences of different methods of pre-treatment of the glassy carbon electrode was also discussed. In Na₂B₄.O₇-KH₂PO₄ buffer solution, the linear range was 2×10^?9-1×10^?9 mol/l and the detection limit was 3.3×10^?9 mol/l by anodic differential pulse voltammetry at GCE. A linear relationship holds between the peak current and the concentration of bilirubin in a concentration range of 1×10^?9-4×10^?7 mol/l with good precision and accuracy, and the limit of detection was 2×10^?10 mol/l, when cathodic differential pulse adsorption voltammetry at HMDE was used.     

Direct Electrochemistry of Hemoglobin Entrapped in Composite Electrodeposited Chitosan‐Multiwall Carbon Nanotubes and Nanogold Particles Membrane and Its Electrocatalytic Application

Hemoglobin was entrapped in composite electrodeposited chitosan‐multiwall carbon nanotubes (MCNTs) film by assembling gold nanoparticles and hemoglobin step by step. In phosphate buffer solution (pH 7), a pair of well‐defined and quasireversible redox peaks appeared with formal potential at ?0.289 V and peak separation of 100 mV. The redox peaks respected for the direct electrochemistry of hemoglobin at the surface of chitosan‐MCNTs‐gold nanoparticles modified electrode. The parameters of experiments have also been optimized. The composite electrode showed excellent electrocatalysis to peroxide hydrogen and oxygen, the peak current was linearly proportional to H₂O₂ concentration in the range from 1×10^?6 mol/L to 4.7×10^?4 mol/L with a detection limit of 5.0×10^?7 mol/L, and this biosensor exhibited high stability, good reproducibility and better selectivity. The biosensor showed a Michaelis–Menten kinetic response as H₂O₂ concentration is larger than 5.0×10^?4 mol/L, the apparent Michaelis–Menten constant for hydrogen peroxide was calculated to be 1.61 μmol/L.     

The Influencing Mechanism of Acidity on the Oxidation Peak Currents of Uric Acid and Ascorbic Acid at the PACPE by Cyclic Voltammetry

In this paper, a pre‐anodized carbon paste electrode (PACPE) is fabricated by a simple electrochemical pretreatment method, which can be used for the simultaneous determination of uric acid (UA) and ascorbic acid (AA). The influencing mechanism of the acidity on the size of oxidation peak current (i_p,a) of UA and AA is discussed in detail. According to the results, in different pH conditions, the intensity of hydrogen bonding between UA, AA and the surface of PACPE, the degree of reduction reaction at the auxiliary electrode, and the structural configurations of UA and AA with different species in reaction system have evident influence on the size of oxidation peak current. In pH 7.00 phosphate buffer solution, the calibration curves for UA and AA are obtained in the range of 5.0 x 10^‐7–5.0 x 10^‐5 mol/L and 3.0 x 10^‐5–5.0 x 10^‐3 mol/L, respectively. The detection limits for UA and AA are found to be 2.0 x 10^‐8 mol/L and 1.2 x 10^‐6 mol/L, respectively. This proposed method has been successfully applied to determine UA and AA in human urine simultaneously with satisfactory results.     

Electrochemical determination of hydrogen peroxide using o -dianisidine as substrate and hemoglobin as catalyst

A new electrochemical method for the determination of microamounts of hydrogen peroxide utilizing o-dianisidine (ODA) as substrate and hemoglobin (Hb) as catalyst is described in this paper. Hb can be used as mimetic peroxidase and it can catalyse the reduction of hydrogen peroxide with the subsequent oxidation of ODA. The oxidative reaction product is an azo compound, which is an electroactive substance and has a sensitive second-order derivative polarographic reductive peak at the potential of -0.58 V (vs. SCE) in pH 80 Britton-Robinson (B-R) buffer solution. The conditions of Hb-catalytic reaction and polarographic detection of the reaction product were carefully studied. By using this polarographic peak and under optimal conditions, the calibration curve for the H₂O₂ was constructed in the linear range of 2.0 x 10^-7 ∼ 10 x 10^-4 mol/l with the detection limit of 5.0 x 10^-8 mol/l. This method can also be used to the determination of Hb content in the range of 20 x 10^-9 ∼ 30 x 10^-7 mol/l with a detection limit of 10 x 10^-9 mol/l. The proposed method was further applied to the determination of the content of H₂O₂ in fresh rainwater with satisfactory results. The catalytic reaction mechanism and the electrode reductive process of the reaction product were carefully studied.