Solvent Extraction Separation of Iridium(III) from Rhodium(III) by N-n-Octylaniline

The use ofN-n-octylaniline for the extraction of iridium(III) from malonate media is studied at pH 8.5. Iridium(III) extracted in the organic phase was stripped with 2.0 M hydrochloric acid and was determined spectrophotometrically by the stannous chloride–hydrobromic acid method at 385 nm. The extraction system is studied as a function of the equilibration time, diluent, reagent concentration and diverse ions. Experimental data have been analyzed graphically to determine the stoichiometry of the extracted species. It was found that the extraction of iridium(III) proceeds by an anion exchange mechanism and transforms into the extracted species [RR"NH₂ ⁺Ir(C₃H₂O₄)₂ ^–]_org. The method is simple, rapid, and selective and has been devised for the sequential separation of iridium(III) from rhodium(III), not only from each other, but also from other accompanying Platinum Group Metals (PGMs), Au(III), and base metals.     

Iridium (III) and rhodium (III) triazoles by 1,3-dipolar cycloadditons to a coordinated azide in iridium (III) and rhodium (III) compounds

The reaction of [(η⁵-C₅Me₅)M(μCl)Cl]₂ with the ligand (L^∩L) in the presence of sodium methoxide yielded compounds of general formula [(η⁵-C₅Me₅)M(L^∩L)Cl] (1–10) (where M = Ir or Rh and L^∩L = N^∩O or O^∩O chelate ligands). Azido complexes of formulation [(η⁵-C₅Me₅)M(L^∩L)N₃] (11–20) have been prepared by the reaction of [(η⁵-C₅Me₅)M(μN₃)(X)]₂ (X = Cl or N₃) with the corresponding ligands or by the direct reaction of [(η⁵-C₅Me₅)M(L^∩L)Cl] with NaN₃. These azido complexes [(η⁵-C₅Me₅)M(L^∩L)N₃] undergo 1,3-dipolar cycloaddition reaction with substituted alkynes in CH₂Cl₂ and for the first time in ethanol at room temperature to yield iridium (III) and rhodium (III) triazoles (21–28). The compounds were characterized on the basis of spectroscopic data, and the molecular structures of 2 and 26 have been established by single crystal X-ray diffraction.     

Synthesis of cationic gold(III) complexes using iodine(III)

Abstract

We report the synthesis and characterization of cationic Au(III) complexes supported by nitrogen-based ligands. The syntheses are achieved by reacting Au(I) complexes [Au(N-Me-imidazole)₂]⁺ and [Au(pyridine)(NHC)]⁺ with iodine(III) reagents PhI(OTf)(OAc) and [PhI(pyridine)₂]²⁺ yielding a series of cationic gold(III) complexes. In contrast, reactions of phosphine ligated gold(I) complexes with iodine(III) reagents results in the oxidation of the phosphine ligand.     

Zur Kenntnis der Sulfito-kobalt(III)-Ammine. I. Sulfitopentammin- und Sulfitoaquotetramminkobalt(III)-Salze

Sulphito Cobalt (III) Ammines. I. Sulphitopentaamminecobalt (III) and Sulphitoaquotetraamminecobalt(III) Salts Because of the trans effect of the sulphito group salts containing the cation [CoSO₃(NH₃)₅]⁺ react with H₂O forming [CoSO₃H₂O(NH₃)₄]⁺. In acid medium the conversion is complete. Therefore, sulphitopentaamminecobalt(III) salts have to be prepared and purified in solutions containing free ammonia. Earlier preparation methods not regarding this circumstance lead to tetraammine compounds or to mixture of pentaammine and tetraammine complexes. The preparation and the properties of a number of sulphitopentaammine and sulphito-aquotetraamminecobalt(III) salts are described (see “Inhaltsübersicht”). The light absorption and the IR spectra of the complexes [CoSO₃(NH₃)₅]⁺ and [CoSO₃H₂O(NH₃)₄]⁺ are reported and discussed.     

Solvent extraction of trivalent lanthanide Pr(III), Ho(III) and Er(III) with N-benzoyl-N-phenylhydroxylamine

Extraction of Pr(III), Ho(III) and Er(III) has been studied in the pH range of 1–10 with N-benzoyl-N-phenylhydroxylamine (BPHA) in benzene. The separation was found to be quantitative in borate media from pH 7 to 10, at an ionic strength of 0.1M (H⁺, BO₃ ^3–). The stoichiometric composition of the complexes under the optimal conditions of shaking time, pH and reagent concentration was formulated using slope analysis and found to be M(BPHA)₃, where M=Pr(III), Ho(III) and Er(III). The effect of various masking agents shows that citrate, ascorbate, EDTA, oxalate, fluoride and phosphate form stable complexes with these rare earths as compared to BPHA. The decontamination factors for different cations with respect to these rare earths under the optimum conditions have been evaluated.     

Trigonal (-3) symmetry octahedral lanthanide(III) complexes of zwitterionic tripodal ligands: luminescence and magnetism

Sandwich coordination complexes, [Ln^III(H₃L)₂]X₃?solvents, of Tb(III), Eu(III), Dy(III), Ho(III) and Er(III) were prepared with two new zwitterionic ester-substituted tripodal amine ligands, tris((2-hydroxy-5-n-butyl benzoate)aminoethyl)-amine (H₃L¹) and tris((2-hydroxy-5-methyl benzoate)aminoethyl)-amine (H₃L²). These ligands were synthesised by condensation of the appropriately substituted salicylaldehyde with tris(2-aminoethyl)amine (tren) followed by in situ reduction of the tris-imine to tris-amine. Subsequent 2:1 reaction with lanthanide(III) ions yields [Ln^III(H₃L)₂]X₃?solvents (L = L¹, L²; X = Cl^?, NO₃^?; solvents = MeOH or H₂O). All complexes were characterised by microanalysis, infrared spectroscopy, high resolution mass spectrometry and solid-state photoluminescence measurements. The crystal structures of [Tb^III(H₃L¹)₂]Cl₃·6MeOH, [Dy(H₃L¹)₂]Cl₃·6MeOH, [Eu^III(H₃L¹)₂]Cl₃·6MeOH and [Tb^III(H₃L¹)₂](NO₃)₃ reveal high-crystallographic ?3 symmetry at the O₆-coordinated octahedral lanthanide(III) ions and that the tripodal ligands are bound in zwitterionic form: the protons from the phenolic oxygens have migrated to the amino nitrogens. Photoluminescence measurements indicate various degrees of energy transfer of the ligand chromophore to the lanthanide ions, as both ligand and lanthanide emission features are observed. Despite the high-crystallographic symmetry and the likely small transverse magnetic anisotropy of the complexes, no evidence of slow relaxation of the magnetisation, characteristic of a single-molecule magnet, was observed for [Tb^III(H₃L¹)₂]Cl₃·MeOH·3H₂O, [Dy^III(H₃L¹)₂]Cl₃·6H₂O, [Ho^III(H₃L¹)₂](NO₃)₃·2H₂O, [Er^III(H₃L¹)₂]·H₂O and [Tb^III(H₃L¹)₂](NO₃)₃ down to 2.0 K.     

Thiocyanate complexing of Np(IV) and Pu(III)

The thiocyanate complexing of Np(IV), at μ = 2.0 and [H⁺] = 1.0 M, has been studied by solvent extraction method, using thenoyltrifluoroacetone (TTA) and dinonylnaphthalene-sulphanic acid (DNNS), and that of Pu(III), under similar conditions, using DNNS. Data indicate the formation of three successive complexes between Np(IV) and SCN⁻ with the overall stability constants 31.3 ± 4.9, 114.7 ± 20.7 and 340.9 ± 18.3. Pu(III) seems to form only one complex upto [SCN⁻] ⩽ 0.4 M, with the stability constant value of 2.14 + 0.15, whereas further complexing appears to occur at higher concentrations of SCN⁻; the β₂ is estimated to be about 0.5. Spectrophotometric and solvent extraction data obtained further confirmed the thiocyanate complexing of these two ions. The thermodynamic constants associated with the complex formation of Np(IV) with thiocyanate have also been determined.     

Structures and fluorescence of two new hetero-dinuclear lanthanide(III) complexes derived from a Schiff-base ligand

Two isostructural dinuclear lanthanide(III)/Schiff-base complexes [{Ce_1.5Eu_0.5(clapi)}₂]·2CH₃CN (1) and [{La_1.5Eu_0.5(clapi)}₂]·2CH₃CN (2) {H₃clapi = 2-(5-chloride-2-hydroxyphenyl)-1,3-bis[4-(5-chloride-2-hydroxyphenyl)-3-azabut-3-enyl]-1,3-imidazolidine} have been prepared by template procedure and characterized by elemental analyses, ICP, IR, and single-crystal X-ray diffraction analyses. Lanthanide ions Ce(III) and Eu(III) in 1, and La(III) and Eu(III) in 2 are disordered with occupancies 0.75 for Ce and 0.25 for Eu in 1; 0.75 for La and 0.25 for Eu in 2. In the compounds, each lanthanide is coordinated to four N and four O atoms from two clapi^3? ligands, forming a distorted square antiprism. Two phenol oxygen atoms from the middle arms of the two heptadentate μ₂-bridging ligands connect the two Ce(Eu) atoms in 1, and La(Eu) in 2. The solution of the two complexes in CH₂Cl₂ exhibits red fluorescence from Eu³⁺ ions at 77 K, very weak at room temperature.     

A chromium(III) bis-acetylide complex containing a trans-diethyl-ethylenedithio-substituted tetrathiafulvalene (TTF) derivative: synthesis,crystal structures,and magnetic properties

A new Cr(III) bis-acetylide complex containing redox-active ethynyl-substituted 4-methyl-4′,5′-trans-diethyl-ethylenedithio-tetrathiafulvalene, [Cr(III)cyclam(C≡C-MeEt₂EDT-TTF)₂]ⁿ⁺ ([1]ⁿ⁺) was synthesized. The crystal structures of two salts, [1][Ni(dmit)₂] (dmit?=?2-thioxo-1,3-dithiole-4,5-dithiolate) and [1][Ni(mnt)₂]₃ (mnt?=?maleonitriledithiolate), were determined by single-crystal X-ray diffraction. In the crystal of [1][Ni(dmit)₂], the trans-diethyl group of [1]⁺ is in the axial position and prevents π-stacking of the TTF units, resulting in a negligibly weak spin–spin interaction between Cr³⁺ and [Ni(dmit)₂]^?. In contrast, in [1][Ni(mnt)₂]_3, the trans-diethyl group is in the equatorial position in [1][Ni(mnt)₂]₃ owing to the strong attractive force between the π-stacked TTF⁺ units and the [Ni(mnt)₂]^? anions. This π-stacking has a significant effect on the magnetic property of [1] [Ni(mnt)₂]₃. The π-stacked TTF⁺ units and [Ni(mnt)₂]^? anions behave approximately as a one-dimensional S?=?1/2 antiferromagnetic chain connecting the spins of Cr³⁺ antiferromagnetically.

     

Zur Kenntnis der Sulfito-kobalt(III)-Ammine. III. Hydrogensulfitokobalt(III)-Ammine

Sulphito Cobalt(III) Ammines. III. Hydrogensulphito Cobalt(III) Ammines Concentrated acids react with [CoSO₃(NH₃)₅]⁺ salts hydrogen- sulphitopentaamminecobalt(III) complexes. [Co(HSO₃)(NH₃)₅]Cl₂, [Co(HSO₃)(NH₃)₅]Br₂ and [Co(HSO₃)(NH₃)₅](HSO₄)₂·H₂O have been isolated. These substances are yellow coloured in contrast to an earlier work which reported red colour. Furthermore, the hydrogensulphitoacidotetreaammine complexes [Co(HSO₃)Cl(NH₃)₄]Cl, [Co(HSO₃)Cl(NH₃)₄]ClO₄·H₂O, [Co(HSO₃)Br(NH₃)₄]Br and [Co(HSO₃) CN(NH₃)₄]Cl habe been prepared. [Co(HSO₃)Br(NH₃)₄]Br is losing spontaneously HBr forming [CoSO₃Br(NH₃)₄]. The neutral complex [Co(HSO₃)SO₃(NH₃)₄]·1/2H₂O has been obtained from cis- NH₄[Co(SO₃)₂(NH₃)₄] and HCl. The absorption spectra in the IR, visible and UV region are reported and discussed. The HSO₃ group is coordinated to Co through the S atom. The Co? S bond is weaker than in the sulphito complexes as concluded from the RAMAN spectrum. In the new complexes, the hydrogensulphito ligand causes a minor trans effect than the sulphito ligand.     

Synergistic extraction of Ce(III), Eu(III) and Tm(III) with a mixture of picrolonic acid and benzo-15-crown-5 in chloroform

Summary The synergistic mixture comprising picrolonic acid (HPA) and benzo-15-crown-5 (B15C5) in chloroform has been used for the extraction of Ce(III), Eu(III) and Tm(III) as representatives of lanthanide(III) ions from pH 1-2 solutions having ionic strength of 0.1 mol^. dm^-3(K⁺/H⁺, Cl^-). The composition of the extracted species has been determined as M(PA)₃^. nB15C5 where M is Ce, Eu and Tm and n=1 or 2. The influence of various anions and cations on the extraction of these ions has also been studied and only oxalate, cyanide and tartrate have some deleterious effect. The extraction equilibrium constants have been evaluated and discussed.     

Dirhenium(III,III) trithiocarbamato complexes: experimental and theoretical investigation

The green colored trithiocarbamato complexes of dirhenium(III,III) of type [Re₂(μ-η²-SL_R)₂(η²-L_R)₃][ReO₄] (4(L_R)), where L_R represents the dithiocarbamato ligands [L_R?=?S₂CNEt₂, 4(L_Et) and S₂CN(CH₂)₄, 4(L_Pyr)], have been synthesized in moderate yield by reacting Re₂(μ-O₂CCH₃)₄Cl₂ (1) and sodium salt of diethyldithiocarbamate or pyrrolidinedithiocarbamate in boiling ethanol under nitrogen atmosphere. The spectral (IR, UV–vis, NMR) and electrochemical properties of the complexes are reported. The identity of complex 4(L_Et) has been established by single-crystal X-ray structure determination. The density functional theory (DFT) calculations rationalized the electronic structure of complexes 4(L_R) in comparison with dithiocarbamato complexes of dirhenium(II,II) and dirhenium(III,II). The absorption spectra of the 4(L_R) complexes are scrutinized by the time-dependent DFT analysis.

     

Synthesis,crystal structure,and antibacterial activity of mononuclear nickel(II) and cobalt(III) Schiff-base complexes

Four new mononuclear complexes, [Ni(L¹)(NCS)₂] (1), [Ni(L²)(NCS)₂] (2), [Co(L¹)(N₃)₂]ClO₄ (3), and [Co(L²)(N₃)₂]ClO₄ (4), where L¹ and L² are N,N′-bis[(pyridin-2-yl)methylidene]butane-1,4-diamine and N,N′-bis[(pyridin-2-yl)benzylidene]butane-1,4-diamine, respectively, have been prepared. The syntheses have been achieved by reaction of the respective metal perchlorate with the tetradentate Schiff bases, L¹ and L², in presence of thiocyanate (for 1 and 2) or azide (for 3 and 4). The complexes have been characterized by microanalytical, spectroscopic, single crystal X-ray diffraction and other physicochemical studies. Structural studies reveal that 1–4 are distorted octahedral geometries. The antibacterial activity of all the complexes and their constituent Schiff bases have been tested against Gram-positive and Gram-negative bacteria.     

The extraction of iron(III) by dioctylarsinic acid in chloroform

Dioctylarsinic acid, HDOAA, in chloroform solution has been investigated as a reagent for the extraction of iron(III) chloride. The extraction coefficient reaches two maxima, one of 1.5 at 8.5 M hydrochloric acid and another of 7 at pH 2.3. Experiments in the range 4–8 M for sulfuric, nitric and perchloric acids showed no extraction of iron(III) from these solutions for extraction times of 6 h. Evidence for the extraction of H₃FeCl₆ from 4–9 M hydrochloric acid solutions as [(H₂DOAA)⁺]₃FeCl₆^3- is presented. The species extracted from aqueous solutions of pH 1–2.3 is probably a hydroxy complex of the composition [Fe₂(DOAA)₂(HDOAA)X₄(H₂0)₂ ](X = OH and/or Cl).     

Synthesis and characterization of Ru(III), Rh(III), Pt(IV) and Ir(III) thiosemicarbazone complexes

Ru(III), Rh(III), Pt(IV) and Ir(III) complexes of 2-furfural thiosemicarbazone as ligand have been synthesised. These complexes have the composition [M(ligand)₂X₂]X (M = Ru(III) Rh(III) and Ir(III) X = Cl and Br) and [Pt(ligand)₂ X₂] X₂ (X = Cl, Br and 1/2SO₄). The deprotonated ligand forms the complexes of the formulae M(ligand-H)₃ and Pt(ligand-H)₃Cl. All these complexes have been characterized by elemental analysis, magnetic measurements, electronic and infrared spectral studies. All the complexes are six-coordinate octahedral.     

Lanthanum(III) and praseodymium(III) complexes of acetylferrocenyl mercaptotriazoles

Schiff base complexes derived from 3-substituted phenyl-4-amino-thiolato-1,2,4-triazoles and acetylferrocene (LH), with lanthanum(III) and praseodymium(III) of the type [M(L)₃] have been prepared and characterised by elemental analysis, electrical conductance, magnetic moments and spectral (electronic, i.r., ¹H-n.m.r. and ¹³C-n.m.r.) data. The thermal behaviour of selected complexes was investigated by t.g. and d.t.g. techniques.     

Kinetics of thermal decomposition of iron(III) dicarboxylate complexes

Summary Tris(dicarboxylate) complexes of iron(III) with oxalate, maleate, malonate and phthalate viz. K₃[Fe(C₂O₄)₃]×3H₂O (1), K₃[Fe(OOCCH₂COO)₃]×3H₂O (2), K₃[Fe(OOCCH=CHCOO)₃]×3H₂O (3), K₃[Fe(OOC-1,2-(C₆H₄)-COO)₃]×3H₂O (4) have been synthesized and characterized using a combination of physicochemical techniques. The thermal decomposition behaviour of these complexes have been investigated under dynamic air atmosphere upto 800 K. All these complexes undergo a three-step dehydration/decomposition process for which the kinetic parameters have been calculated using Freeman-Carrol model as well as using different mechanistic models of the solid-state reactions. The trisoxalato and trismalonato ferrate(III) complexes undergo rapid dehydration at lower temperature below 470 K. At moderately higher temperatures (i.e. >600 and 500 K, respectively) they formed bis chelate iron(III) complexes. The trismalonato and trismaleato complexes dehydrate with almost equal ease but the latter is much less stable to decomposition and yields FeCO₃ below 760 K. The cis-dicarboxylate complexes particularly with maleate(2-) and phthalate(2-) ligands are highly prone to the loss of cyclic anhydrides at moderately raised temperatures. The thermal decomposition of the tris(dicarboxylato)iron(II) to iron oxide was not observed in the investigated temperature range up to 800 K. The dehydration processes generally followed the first or second order mechanism while the third decomposition steps followed either three-dimensional diffusion or contracting volume mechanism.     

THE CRYSTAL AND MOLECULAR STRUCTURE OF RUBIDIUM BIS(PYRIDINE-2,6-DICARBOXYLATO)-CHROMATE(III)

Abstract

A three dimensional X-ray structural analysis of rubidium bis (pyridine-2,6-dicarboxylato)chromate(III), Rb[Cr(dipic)₂], has been carried out. The structure was refined by full matrix least-squares methods, using 713 observed independent reflections recorded at room temperature, to a conventional weighted R of 0.034. The crystals are tetragonal with a=b=6.950(3) Å, c=29.47(1) Å, space group 14 1/a and Z=4. The point group symmetry of the [Cr(dipic)₂]^? ion is S₄. The Cr–N and Cr–O distances (1.974(4) and 2.000(3) Å respectively) noticeably differ from the usual values in aminoacid chromium(III) complexes. The π bonding effect of the pyridine nitrogen atom corroborates the previous spectral studies on the sodium salt of this complex. The lability of [Cr(dipic)₂]^? in acid solution has been tentatively explained on the basis of the relatively severe strain within the complex ion.     

Extraction of Sm(III), Gd(III) and Ho(III) ions with picrolonic acid in methylisobutylketone

Summary Picrolonic acid (HPA) in methylisobutylketone (MIBK) (0.01 mol^. dm^-3) has been used for the extraction of lanthanide(III) ions such as Sm(III), Gd(III) and Ho(III) (Me) (~3^. 10^-6mol^. dm^-3) from pH 1-2 buffer solutions of 0.1 mol^. dm^-3(H⁺, Cl^-) ionic strength and quantitative extraction (>95%) was found at pH 2. Through slope analysis the composition of the organometallic adduct responsible for the extraction came out to be M(PA)₃. The conditional equilibrium constant values, log K_ex, were deduced to be 2.60±0.01, 2.09±0.01 and 1.44±0.03 for these lanthanide(III) ions, respectively. The metals in concentration up to ~2.5^. 10^-4mol^. dm^-3can be quantitatively extracted by the proposed system. Among the various anions, fluoride, oxalate and cyanide ions (~3.0^. 10^-4mol^. dm^-3) and, among the cations, Zn(II) Cu(II), Co(II) and Fe(III) reduced the lanthanide extraction. The extraction of various other metal ions at the optimized conditions of Me extraction for this series of lanthanide ions was also studied and high separation factors (10²-10³) were obtained showing the good selectivity of this extraction system.     

Group III quinaldates: synthesis,structure and photoluminescence

The reactions of Al(III), Ga(III) and In(III) nitrates with 2-quinaldic acid (qaH) afforded [Al₂(OH)₂(qa)₄]·2H₂O (1), [Ga(qa)₂(H₂O)₂]NO₃ (2) and [In(qa)₂(NO₃)(H₂O)] (3), respectively, in high yields. The crystal structures of 1, 2 and 3 have been determined by single-crystal X-ray crystallography. The structure of 1 features a di-hydroxo bridged [Al₂(μ-OH)₂]⁴⁺ dimer in which each Al(III) is further ligated by two bidentate chelate qa^? ligands. Complexes 2 and 3 are mononuclear with the M(III) ions in octahedral environments surrounded by two bidentate chelate qa^? and two H₂O in 2 or one H₂O and a terminal NO₃^? in 3. Characteristic IR as well as thermal analysis and solid-state fluorescence are discussed.