Determination of Mercury Using a Novel Sonogel‐Carbon 3‐Methylthiophene Electrode

Abstract

A solid Sonogel‐Carbon electrode was modified for the determination of Hg (II) in industrial waste water. 3‐Methylthiophene (3MT), pyrrol, poly‐3‐methylthiophene (P3MT), polypyrrol, and C18 were used for the chemical modification. The obtained composite electrodes were tested for their response to Hg(II); the best results were observed for the 3MT monomer modification with a detection limit of 10^?2 mg · l^?1 and 3 weeks lifetime of use. A linear relationship between anodic peak height and concentration inside the range of 0.07–0.42 mg · l^?1 was obtained. A study of interferences due to other heavy metal is also included.     

Anodic Stripping Voltammetry Determination of Pb(II) and Cd(II) at a Bismuth/Poly(aniline) Film Electrode

Abstract

A novel voltammetric method—anodic—using a bismuth/poly(aniline) film electrode has been developed for simultaneous measurement of Pb(II) and Cd(II) at low µg L^?1 concentration levels by stripping voltammetry. The results confirmed that the bismuth/poly(aniline) film electrode offered high‐quality stripping performance compared with the bismuth film electrode. Well‐defined sharp stripping peaks were observed for Pb(II) and Cd(II), along with an extremely low baseline. The detection limits of Pb(II) and Cd(II) are 1.03 µg L^?1 and 1.48 µg L^?1, respectively. The bismuth/poly (aniline) electrode has been applied to the determination of Pb(II) in tap water samples with satisfactory results.     

Thiocyanate-Selective PVC Membrane Electrode Based on Copper and Nickel Complexes of Para-tolualdehydesemicarbazone as Carrier

Abstract

Copper(Cu) and nickel(Ni) complexes of para-tolualdehydesemicarbazone (pTSC) were used as carrier for an thiocyanate ion–selective electrode. The Ni(II)pTSC demonstrated higher selectivity for thiocyanate ions with better performance than Cu(II)pTSC as carrier. The electrode shows a Nernstian slope of 58.8 ± 0.3 mV decade^?1 with improved linear range of 1 × 10^?2 to 1 × 10^?7 M and a low detection limit of 1.25 × 10^?7 M in the pH range of 3–10, giving a relatively fast response and reversibility within 10 s. The selectivity coefficient was calculated using matched potential method. The electrode worked well for nearly 3 months. The response mechanism is discussed by UV-visible spectroscopic technique. The electrodes were used in potentiometric titration of thiocyanate with silver nitrate. Further, the electrode was successfully applied to determine the thiocyanate content in physiological fluids.     

Application of Multivariate Calibration Methods for the Simultaneous Multiwavelength Spectrophotometric Determination of Fe(II), Cu(II), Zn(II), and Mn(II) in Mixtures

Abstract

A sensitive method for the simultaneous spectrophotometric determination of Fe(II), Cu(II), Zn(II), and Mn(II) in mixtures has been developed with the aid of multivariate calibration methods, such as classical least squares (CLS), principal component regression (PCR) and partial least squares (PLS). The method is based on the spectral differences of the analytes in their complexation reaction with 4‐(2‐pyridylazo)‐resorcinol (PAR) and the use of full spectra with wavelengths in the range of 300–600 nm. It was found that both the spectral positive and negative bands obtained against the PAR blank, are proportional to the concentration for each metal complex. The obtained linear calibration concentration ranges are 0.025–0.6, 0.05–0.8, 0.025–0.8, and 0.05–0.8 µg ml^?1 for Fe(II), Cu(II), Zn(II), and Mn(II), respectively, and the LODs for the four metal ions were found to be approximately 1–3×10^?2 µg ml^?1. The proposed method was applied to a verification set of synthetic mixtures of these four metal ions, with models built in three different wavelength ranges, i.e., 300–450, 450–600, and 300–600 nm, corresponding to the positive, negative bands and their combinations, respectively. It was shown that the PLS model for the 300–600 nm range gave the best results (RPE_T=6.9% and average recovery ～100%; cf. PCR: RPE_T=9.5% and average Recovery ～110%). This method was also successfully applied for the determination of the four metal ions in pharmaceutical preparations, chicken feedstuff, and water samples.     

Stripping voltammetry method for determination of manganese as complex with oxine at the carbon paste electrode with and without modification with montmorillonite clay

Oxine (8-hydroxyquinoline) was used as an efficient and selective ligand for stripping voltammetry trace determination of Mn(II). A validated square-wave adsorptive cathodic stripping voltammetry method has been developed for determination of Mn(II) selectively as oxine complex using both the bare carbon paste electrode (CPE) and the modified CPE with 7 % (w/w) montmorillonite-Na clay. Modification of carbon paste with montmorillonite clay was found to greatly enhance its adsorption capacity. Limits of detection of 45 ng l^?1 (8.19?×?10^?10 mol L^?1) and 1.8 ng l^?1 (3.28?×?10^?11 mol L^?1) Mn(II) were achieved using the bare and modified CP electrodes, respectively. The achieved limits of detection of Mn(II) as oxine complex using the modified CPE are much sensitive than the detection limits obtained by most of the reported electrochemical methods. The developed stripping voltammetry method using both electrodes was successfully applied for trace determination of Mn(II) in various water samples without interferences from various organic and inorganic species.     

Electrocatalysis of Horseradish Peroxidase Immobilized on Cobalt Nanoparticles Modified ITO Electrode

Abstract

It is the first time that Horseradish peroxidase (HRP) was successively immobilized on the magnetic cobalt nanoparticles modified ITO (indium tin oxide) electrode. Morphologies of electrode surface were featured by the field emission‐scanning electron microscope (FSEM). Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to characterize the modified process of electrode. Direct electrochemistry and electrocatalysis of HRP immobilized on nano‐Co/ITO were investigated. The biosensor exhibited high sensitivity, good stability, and excellent electrocatalytic activity to the reduction of H₂O₂. Under the optimized experimental conditions, a calibration curve over 2.0×10^?9～2.0×10^?8 mol l^?1 and 2.0×10^?7～2.0×10^?6 mol l^?1, with a limit of detection of 1.9×10^?9 mol l^?1 was obtained. The apparent Michaelis‐Menten constant (K _M ^app ) for HRP/nano‐Co/ITO electrode was calculated to be 0.79 mmol l^?1, indicating a higher affinity of HRP attached on the modified electrode.     

Pt‐Nanoparticle Incorporated Carbon Paste Electrode for the Determination of Cu(II) Ion by Anodic Stripping Voltammetry

Pt‐nanoparticles were synthesized and introduced into a carbon paste electrode (CPE), and the resulting modified electrode was applied to the anodic stripping voltammetry of copper(II) ions. The synthesized Pt‐nanoparticles were characterized by cyclic voltammetry, scanning electron microscopy and X‐ray photoelectron spectroscopy techniques to confirm the purity and the size of the prepared Pt‐nanoparticles (ca. 20 nm). This incorporated material seems to act as catalysts with preconcentration sites for copper(II) species that enhances the sensitivity of Cu(II) ions to Cu(I) species at a deposition potential of ?0.6 V in an aqueous solution. The experimental conditions, such as, the electrode composition, pH of the solution, pre‐concentration time, were optimized for the determination of Cu(II) ion using as‐prepared electrode. The sensitivity changes on the different binder materials and the presence of surfactants in the test solution. The interference effect of the coexisted metals were also investigated. In the presence of surfactants, especially TritonX‐100, the Cu(II) detection limit was lowered to 3.9×10^?9 M. However, the Pt‐nanoparticle modified CPE begins to degrade when the period of deposition exceeds to 10 min. Linear response for copper(II) was found in the concentration range between 3.9×10^?8 M and 1.6×10^?6 M, with an estimated detection limit of 1.6×10^?8 M (1.0 ppb) and relative standard deviation was 4.2% (n=5).     

Catalytic Square-Wave Voltammetric Determination of Acrylamide in Potato Chips

Abstract

Square-wave voltammetry is a fast technique used for determination of trace amounts of acrylamide. When cobalt(II) ions were added to the acrylamide solution, a catalytic peak at about ?1.35 V vs. Ag/AgCl was observed, which was proportional to acrylamide concentration. The calibration curve showed good linearity in the range of 200–800 ng mL^?1 of acrylamide with a regression coefficient of 0.9989. The limit of detection of the method was 3.52 ng mL^?1, and the relative standard deviations for concentrations of 300 ng mL^?1 and 700 ng mL^?1 were 99.8% × 10^?2 and 79.7% × 10^?2, respectively.     

Determination of Benzoyl Peroxide Levels in Wheat Flour and Pharmaceutical Preparations by Differential Pulse Voltammetry in Nonaqueous Media

Abstract

Benzoyl peroxide (BP) was determined by differential pulse voltammetry (DPV) using a glassy carbon electrode in a dichloromethane‐acetic acid (1.5×10^?2 mol l^?1) solution and tetrabutyl ammonium perchlorate (0.01 mol l^?1) as the supporting electrolyte. The peak potential was ?0.045 V (vs. Ag/AgCl). There was a good linear relationship between the peak current and the benzoyl peroxide concentration in the range of 2.5×10^?6–1.0×10^?4 mol l^?1. The detection limit of the method was 2.5×10^?7 mol l^?1. The recovery was 94.8–106.0%. The samples of wheat flour and the pharmaceutical preparations for the treatment of acne vulgaris were directly detected with desired results. The reaction mechanism of benzoyl peroxide on the electrode was also discussed, which was two electrons and two protons irreversible reaction.     

Simultaneous Detection of Copper,Lead and Zinc on Tin Film/Gold Nanoparticles/Gold Microelectrode by Square Wave Stripping Voltammetry

In this work, three heavy metals (Cu(II), Pb(II) and Zn(II)) in wide potential window were simultaneously detected on tin film/gold nanoparticles/gold microelectrode (Sn/GNPs/gold microelectrode) by the method of square wave stripping voltammetry. The Sn/GNPs/gold microelectrode was fabricated by in situ plating of a Sn film on a gold nanoparticles (GNPs) modified gold microelectrode. The influence of hydrogen overflow on stripping of Zn(II) on the gold microelectrode was reduced by modification of GNPs, which made the stripping potential of target metals shift positively. The interference of sulfhydryl groups was reduced and the selectivity of the microelectrode was improved due to the addition of Sn in the detection solution. After accumulation at ?1.4 V for 300 s in acetate buffer solution (0.1 mol L^?1, pH 4.5), the Sn/GNPs/gold microelectrode revealed a good linear behavior in the examined concentration ranges from 5 to 500 µg L^?1 for Cu(II) and Pb(II), and from 10 to 500 µg L^?1 for Zn(II), with a limit of detection of 2 µg L^?1 for Cu(II), 3 µg L^?1 for Pb(II) and 5 µg L^?1 for Zn(II) (S/N=3). When compared with a Sb/GNPs/gold microelectrode and a Bi/GNPs/gold microelectrode, the Sn/GNPs/gold microelectrode showed the best stripping performance to Cu(II), Pb(II) and Zn(II). As a new type of environment‐friendly electrode, the Sn/GNPs/gold microelectrode has potential applications for detection of heavy metals.     

β-Cyclodextrin-based polyurethane (β-CDPU) polymers as solid media for adsorption and determination of Pb(II) ions in dust and water samples

In this work, β-CD-based polyurethane copolymers (β-CDPU) have been prepared by reacting β-CD with hexamethylene diisocyanate as cross-linked agent in dry DMF. This polymer showed high selectivity for preconcentration of Pb(II) at trace level prior to its flame atomic absorption spectrometric determination. The effect of several parameters such as pH, flow rate of sample, eluent kind and volume was investigated. The adsorption behaviors and mechanisms of Pb(II) on the samples were also studied. The maximum adsorption amount of Pb(II) was 8 mg g^?1 with the preconcentration factor of 250 for Pb(II). The Langmuir isotherm was proved to describe the adsorption data better than the Freundlich isotherm and a pseudo-first-order kinetic model fits the adsorption kinetic processes well. The calibration curve was linear in the range of (3–200 ng mL^?1) with a correlation coefficient of 0.9996. The limit of detection based on three times the standard deviation of the blank was 1.15 ng mL^?1. The relative standard deviations for the determination of 10 and 100 ng mL^?1 of Pb(II) were 3.60 and 0.43 % (n = 10), respectively. The method was successfully applied to the determination of lead in some environmental samples such as Tehran and Bushehr drinking water, river water and dust samples.     

Nonextractive Trace Level Simultaneous Determination of Mercury(II) and Zinc(II) in Environmental Samples with 2‐(5‐Bromo‐2‐pyridylazo)‐5‐diethylaminophenol and Cetylpyridinium Chloride

Abstract

A simple, rapid, selective, and sensitive method for the derivative spectrophotometric determination of Hg(II) and its simultaneous determination in the presence of Zn(II) using 2‐(5‐bromo‐2‐pyridylazo)‐5‐diethylaminophenol in the presence of cetylpyridinium chloride, a cationic surfactant, has been developed. The molar absorption coefficient and analytical sensitivity of the 1∶1 Hg(II) complex at 558 nm (λ_max) are 5.78×10⁴ L mol^?1 cm^?1 and 0.67 ng mL^?1, respectively. The detection limit of Hg(II) is 1.40×10^?2 ng mL^?1, and Beer's law is valid in the concentration range 0.05–2.40 µg mL^?1. Overlapping spectral profiles of Hg(II) and Zn(II) complexes in zero‐order mode interfere in their simultaneous determination. However, 0.10–2.00 µg mL^?1 of Hg(II) and 0.065–0.650 µg mL^?1 of Zn(II), when present together, can be simultaneously determined at zero cross point of the derivative spectrum, without any prior separation. The relative standard deviation for six replicate measurements of solutions containing 0.134 µg mL^?1 of Hg(II) and 0.620 µg mL^?1 of Zn(II) is 1.72 and 1.47%, respectively. The proposed method has successfully been evaluated for trace level simultaneous determination of Hg(II) and Zn(II) in environmental samples.     

Water hyacinth modified carbon paste electrode for simultaneous electrochemical stripping analysis of Cd (II) and Pb (II)

In this study, we demonstrated a highly sensitive electrochemical sensor for the simultaneous detection of Pb (II) and Cd (II) in aqueous solution using carbon paste electrode modified with Eichhornia crassipes powder by square wave anodic stripping voltammetry. The effect of modifier composition, pH, preconcentration time, reduction potential and time, and type of supporting electrolyte on the determination of metal ions were investigated. Pre-concentration on the modified surface was performed at open circuit. The modified electrode exhibited well-defined and separate stripping peaks for Pb (II) and Cd (II). Under optimum experimental conditions, a linear range for both metal ions was from 10 to 5000 μg L^?1 with the detection limits of 4.9 μg L^?1, 2.1 μg L^?1 for Cd(II) and Pb (II), respectively. The modified electrode was found to be sensitive and selective when applied to determine trace amounts of Cd (II) and Pb (II) in natural water samples.     

Highly Selective and Sensitive Preconcentration of Mercury Ion and Determination by Cold Vapor Atomic Absorption Spectroscopy

Abstract

A simple and selective method based on a sodium dodecyl sulfate (SDS)–coated chromosorb P modified by 2‐mercaptobenzoxazole (MBO) has been developed to selectively separate and concentrate ultra trace amounts of mercury(II) ions for its highly sensitive measurement by cold vapor atomic absorption spectrometry (CVAAS).

The mercury ions were adsorbed quantitatively on SDS‐coated chromosorb due to its complexation with MBO, while the retained Hg²⁺ ions were then stripped from the column with minimal amounts of 2 M nitric acid in acetone. The eluting solution was sent to CV‐AAS for evaluating Hg²⁺ ion content and results indicate that the calibration curve was linear for Hg²⁺ ion in the range of 0.05–85.6 ng mL^?1 and 0.09–9.6 µg mL^?1 of Hg²⁺ ions. Maximum capacity of the SDS‐coated chromosorb modified with 40 mg of the ligand was found to be 498±30 µg of mercury(II), the limit of detection was 0.01 ng mL^?1, and enrichment factors were about 300, which make it suitable it for dilute solution analysis. The method was successfully applied to the determination of Hg²⁺ ion content in real samples.     

Electrochemical Study of Interaction Between Clozapine and DNA and Its Analytical Application

Abstract

The interaction between clozapine (CLZ) as an orally administrated antipsychotic drug with double stranded calf thymus DNA (dsDNA) was investigated at electrode surface using differential pulse voltammetry (DPV). Activated carbon paste electrode (CPE) was modified with dsDNA and used for monitoring the changes of the characteristics peak of CLZ in 0.05 M acetate buffer (pH 4.3). The adsorptive stripping voltammetry on dsDNA‐modified carbon paste electrode (dsDNA‐CPE) was used for determination of very low concentration of CLZ. Under optimal conditions, the oxidation peak current is proportional to CLZ concentration in the range of 7×10^?9?1.2×10^?6 mol l^?1 with a detection limit of 1.5×10^?9 mol l^?1 for 180 s accumulation time by DPV. The proposed dsDNA‐CPE was successfully used for determination of CLZ in human serum samples with recovery of 97.0±2.5%.     

Spectrophotometric Determination of Cadmium(II) Using p,p′‐Dinitro‐SYM‐Diphenylcarbazid in Aqueous Solutions

Abstract

A sensitive and selective spectrophotometric method is proposed for the rapid determination of cadmium(II) using, p,p′‐dinitro‐sym‐diphenylcarbazid, directly in aqueous solution. The reaction between cadmium(II) and p,p′‐dinitro‐sym‐diphenylcarbazid occurs immediately in strong basic media (0.02 N sodium hydroxide solution). The complex shows a maximum of absorption at 630–640 nm, and the absorbance remains stable for at least 24 h. The method allows the cadmium determination over the range 0.5–6.0 µg mL^?1, with a molar absortivity of 2.05×10⁴ L mol^?1 cm^?1 and features a detection limit of 0.13 ppm. The interferences caused by several ions [Ca(II), K(I), Ba(II), Al(III), Pb(II), Zn(II), Cl^?1, NO₃ ^?, SO₄ ^2?], which are present in most of environmental samples, were determined. The validation of the spectrophotometric method was done by recovery test of cadmium(II) in tap water and sea water. The results show that the proposed method has been successfully applied to the determination of cadmium(II) in water samples.     

Indirect Determination of Sulfide by Extraction Flotation Spectrophotometry of Copper(II) with Ammonium Sulfate‐Ethanol‐Water System

A new extraction flotation spectrum method for indirect determination of trace amounts of sulfide by ammonium sulfate‐ethanol‐water system was developed. It showed that Cu(II) could combine with S^2? into precipitate (CuS) which was floated in the surface of ethanol and water in the presence of ammonium sulfate. The sulfide can be indirectly determined by determining the flotation yield of Cu(II). The linear range from 2.4 × 10^?8to 3.2 × 10^?6g/mL and the detect limit of 2.0 × 10^?8g/mL was achieved. The results showed the determination of S^2? was not affected by Pb(II), Zn(II), Cd(II), Fe(II), Co(II),Ni(II), Mn(II) and Cl^?, Br^?, I^?, etc. In the paper, the method was successfully applied to the determination of a trace amount of sulfide in polluted water samples with the advantages of simplicity of equipment, rapidity, low cost, etc.     

Voltammetric Determination of Rutin Using a Carbon Composite Electrode Modified with Copper(II)-Resin

Abstract

The preparation and electrochemical characterization of a carbon composite electrode modified with copper(II)-resin as well as its behavior toward rutin were investigated using cyclic and linear sweep voltammetry. The best voltammetric response was observed for a composite composition of 20% (m/m) copper(II)-resin, 0.10 mol L^?1 KNO₃/10^?6 mol L^?1 HNO₃ solution (pH 6.0) as the supporting electrolyte, and a scan rate of 50 mVs^?1. A linear voltammetric response for rutin was obtained in the concentration range from 9.90 × 10^?7 to 8.07 × 10^?6 mol L^?1, with a detection limit of 2.65 × 10^?8 mol L^?1. The proposed electrode was useful for the quality control and routine analysis of rutin in pharmaceutical formulations.     

Highly Sensitive Determination of Traces of Co(II) in Pharmaceutical and Urine Samples Using Kinetic–Spectrophotometric Method

Abstract

A high sensitive, accurate and simple kinetic method has been developed for determination of trace of Co(II) ions, based on its strongly catalytic effect in the reaction oxidation of disodium-6-hydroxy-5-[(4-sulfophenyl)azo]-2-naphtalenesulfonic acid (artificial color, Sunset Yellow FCF, E110 in text selected as SY) by hydrogen peroxide in borate buffer at pH of 9.5, by monitoring the rate of disappearance of SY. Reaction rate was monitored spectrophotometrically, at λ_max of the SY at 478.4 nm. The optimum operating conditions regarding reagents concentration and temperature were established. The tangent method was adopted for constructing the calibration curve, which was found to be linear over the concentration range 1.18–17.67 ng ml^?1 and 17.67–58.90 ng ml^?1 of Co(II). The limit of detection (3σ) is 0.15 ng ml^?1, and limit of quantification (10σ) is 0.5 ng ml^?1. The effects of the other ions on the reaction rate were determined for an assessment of the selectivity of the method. The developed kinetic procedure was successfully applied for the determination of Co(II) in pharmaceutical and urine samples. The unique features of this procedure are that the determination can be performed at room temperature, and the analysis time is short. The newly developed method is high sensitive, simple, inexpensive and efficient for use in the analysis of a large number of samples.     

Highly Selective Thiocyanate Electrode Based on Bis‐bebzion Schiff Base Binuclear Copper(II) Complex as Neutral Carrier

Abstract

A highly selective polyvinyl chloride (PVC) membrane electrode, based on N,N′‐(aminoethyl)ethylenediamide bis(2‐benzoideneimine) binuclear copper(II) complex [Cu(II)‐AEBB] as neutral carrier, was prepared for thiocyanate (SCN^?) determination, which displays an anti‐Hofmeister selectivity sequence for a series of anions in the following order: SCN^?>ClO₄ ^?>Sal^? > I^?>NO₃ ^?>Br^?> Cl^?>NO₂ ^?>SO₃ ^2?>F^?>H₂PO₄ ^?>SO₄ ^2?. The electrode exhibited near‐Nernst response for SCN^? with a slope of –59.0 mV/decade over a wide concentration range (8.5×10^?7～6.8×10^?1 mol/L) with a detection limit of –5.0×10^?7 mol/L in pH 5.0 phosphate buffer solution at 25°C. Alternating current (AC) impedance and equivalent circuits were used to investigate the thiocyanate response mechanism of the membrane doped with [Cu(II)‐AEBB].