Synthesis, characterization and structure effects on selectivity properties of silica gel covalently bonded diethylenetriamine mono- and bis-salicyaldehyde and naphthaldehyde Schiff(,)s bases towards some heavy metal ions

Four silica gel-immobilized new metal chelate Schiff(,)s bases were synthesized (I-IV). Silica gel chemically bonded diethylenetriamine mono-naphthaldehyde and mono-salicyaldehyde Schiff's bases (phases I and III) were produced via the interaction of silica gel-modified diethylenetriamine with naphthaldehyde and salicylaldehyde, respectively. However, phases II and IV arose through the interaction of bis-naphthaldehyde and bis-salicylaldehyde Schiff(,)s bases of diethylenetriamine with 3-chloropropyltrimethoxysilane modified silica gel. The characterization of such new phases, their capabilities towards selective extraction or separation of Fe(III), Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II) ions were studied and evaluated by both batch and column techniques as a function of pH and time of contact. Phases III and I showed high performance towards Cu(II) extraction, where their Cu(II) sorption determined to be 0.957 and 0.940 mmol g(-1), respectively. However, for phases IV and II, the great affinity was devoted to Fe(III) extraction followed by Cu(II) ions. The reactivity of metal ion sorption was discussed in the light of effects of bulkiness as well as orientation of immobilized chelate on sorbent reactivity. Donor sites of phases III and I (diethylenetriamine and azomethene nitrogens along with phenolic hydroxyl group oxygen) are fully active, whereas phases IV and II are partially active with only participation of oxygen and azomethene nitrogen. The order of increasing thermal stability (IV相似文献   

Determination of Metal Ions in Natural Waters by Flame-AAS after Preconcentration on a 5-Amino-1,3,4-Thiadiazole-2-Thiol Modified Silica Gel.

ABSTRACT

5-amino-1,3,4-thiadiazole-2-thiol groups attached on a silica gel surface have been used for adsorption of Cd(II), Co(II), Cu(II), Fe(III), Ni(II), Pb(II) and Zn(II) from aqueous solutions. The adsorption capacities for each metal ion were (in mmol.g^?1): Cd(II)= 0.35, Co(II)= 0.10, Cu(II)= 0.15, Fe(III)= 0.20, Hg(II)= 0.46, Ni(II)= 0.16, Pb(II)= 0.13 and Zn(II)= 0.15. The modified silica gel was applied in the preconcentration and quantification of trace level metal ions present in water samples (river, and bog water).     

Extraction of metal ions using chemically modified silica gel: a PIXE analysis

Organic ligand with carboxyhydrazide functional group was immobilised on the surface of silica gel and the metal binding capacity of the ligand-embedded silica was investigated. The functional group was covalently bonded to the silica matrix through a spacer of methylene groups by sequential reactions of silica gel with dibromobutane, malonic ester and hydrazine in different media. Surface area value of the modified silica was determined. The changes in surface area were correlated with the structural change of the silica surface due to chemical modifications. A mixture solution of metal ions [K(I),Cr(III),Co(II),Ni(II),Cu(II),Zn(II),Hg(II) and U(VI)] was treated with the ligand-embedded silica in 10(-3) M aqueous solution. The measurement of metal extraction capacity of the silica based ligand was done by multielemental analysis of the metal complexes thus formed by using Proton Induced X-ray Emission (PIXE) technique.     

Reactivity of Thioglycolic Acid Physically and Chemically Bound to Silica Gel as New Selective Solid Phase Extractors for Removal of Heavy Metal Ions From Natural Water Samples

A method is presented for the immobilization of thioglycolic acid moiety on the surface of active silica gel via a simple and direct synthetic route and based on one step reaction procedure. Two-product solid phase extractors were successfully synthesized according to physical adsorption and chemical immobilization binding techniques, phases (I) and (II), respectively. The mode of interaction between the silanol group and the thioglycolic moiety was also discussed for both phases based on the infrared analysis studies. The thermal stability properties as well as the effect of buffer solutions on the percentage hydrolysis of the two silica gel phases were examined and revealed the high stability and superiority of silica phase (II) in these respects. The evaluation of the selectivity and metal uptake properties incorporated in these two silica gel phases were also studied and discussed for a series of divalent heavy metal ions under different controlling factors. The mmol/g values were found to be higher in case of phase (I). The selective removal and extraction of some heavy metal ions, viz . Cu(II), Zn(II), and Hg(II) from natural seawater samples was successfully accomplished with the percentage recovery values for the three tested metal ions in the range of 96.5-98.4 - 0.2-0.6%. The presence of higher concentrations of Na(I), K(I), Mg(II) and Ca(II) showed insignificant role or no matrix effect on such selective extraction process due to their 0% values of removal by these silica gel phases (I) and (II).     

Thin Layer Chromatography of Metal Ions Complexed with Anils (VII) Detection,Separation, and Determination

Abstract

Dark colored chelates of p-dimethylaminoanil of 3-benzoyl-methylglyoxal bidentate ligand with Sb(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), ZrO(II), Y(III), La(III), Pr(III), Nd(III) Sm(III), Gd(III) and Dy(III) have been chromatographed on starch bound silica gel thin layers. New correlations of I.R. with R_f (resolving solvent) have been used to ascertain the colored spots.

Among various mixtures resolved qualitatively a few typical ones have been alanysed quantitatively. Errors in determinations and maximum separation limits have also been deduced.     

Synthesis and characterization of silica gel microspheres encapsulated by salicyclic acid functionalized polystyrene and its adsorption of transition metal ions from aqueous solutions

The present study was undertaken to develop a novel adsorbent for heavy metal ions, and this paper presents the synthesis and characterization of a composite material-silica gel microspheres encapsulated by salicyclic acid functionalized polystyrene (SG-PS-azo-SA) with a core-shell structure. SG-PS-azo-SA was used to investigate the adsorption of Mn(II), Co(II), Ni(II), Fe(III), Hg(II), Zn(II), Cd(II), Cr(VI), Pd(II), Cu(II), Ag(I), and Au(III) from aqueous solutions. The results revealed that SG-PS-azo-SA has better adsorption capacity for Cu(II), Ag(I) and Au(III). Langmuir and Freundlich isotherm models were applied to analyze the experimental data, the best interpretation for the experimental data was given by the Langmuir isotherm equation with the maximum adsorption capacity for Cu(II), Ag(I), and Au(III) at 1.288 mmol g⁻¹, 1.850 mmol g⁻¹ and 1.613 mmol g^t-1, respectively. Thus, silica gel encapsulated by salicyclic acid functionalized polystyrene (SG-PS-azo-SA) is favorable and useful for the removal of Cu(II), Ag(I) and Au(III) metal ions.     

Use of Di(n-butyl) and Di(iso-butyl)dithiophosphoric Acids as Complexing Agents in the TLC Separation of Some d and f Transition Metal Ions

The thin layer chromatographic behavior of U(VI), Th(IV), lanthanides(III), Co(II), Ni(II), and Cu(II) on silica gel H with di(n-butyl) and di(iso-butyl)dithiophosphoric acids as complexing agents in the organic mobile phase has been investigated. The results obtained show that the dithiophosphate anion has a substantial effect on the migration of these metal ions. The presence of electron-donor solvents in the mobile phase increases retention, especially for U(VI), Th(IV), and lanthanides(III). The effect is explained on the basis of greater solubility of the metal chelates of the dithiophosphoric anions in the organic mobile phase, because of a solvation process. Separation was investigated for three groups of metal ions — actinides, lanthanides, and d transition metals. By choice of an appropriate organic mobile phase, separation of the pairs Th(IV)-U(VI), Pr(III)-Sm(III), Sm(III)-Gd(III), and Gd(III)-Er(III) was achieved, as was separation of Co(II), Ni(II), and Cu(II) from each other. A complex separation mechanism based on adsorption-desorption, cation exchange, and extraction is suggested.

     

Sorption recovery of metal ions using silica gel modified with salicylaldoxime

Trace metals in water were preconcentrated with silica gel modified with salicylaldoxime and determined by AAS. Optimum conditions for the maximum recovery of metal ions, viz. Cu(II), Ni(II), Co(II), Zn(II) and Fe(III), for both batch and column methods were developed. The efficiency of the adsorbent with respect to different experimental conditions was established.     

Silica Gel Coated with Schiff's Base: Synthesis and Application as an Adsorbent for Cadmium, Copper, Zinc, and Nickel Determination after Preconcentration by Flame Atomic Absorption Spectrometry

A method for the preconcentration of Cd(II), Cu(II), Zn(II), and Ni(II) is proposed using a minicolumn filled with silica gel modified by Schiff's base. The retained analytes on the ligand-coated silica gel were recovered with a small volume of HNO₃ (nitric acid). The metal ions in the eluent were determined by flame atomic absorption spectrometer (FAAS). Different factors, including the pH of the sample solution, the sample volume, the amount of silica gel, eluent volume and matrix effects for preconcentration were examined. The recoveries for the analytes under optimum working conditions were higher than 95%. The relative standard deviations of the determination were 1.50, 2.10, 2.40, 3.43% for Cu(II), Cd(II), Zn(II) and Ni(II). The limits of detection (3s, n = 10) for Cd(II), Cu(II), Zn(II), and Ni(II) were found to be 3, 5, 5 and 4.7 ngL^–1. The proposed method was applied to the analysis of some natural water samples and standard reference aluminum alloy material (NBS SRM 85b).     

8-Hydroxyquinoline anchored to silica gel via new moderate size linker: synthesis and applications as a metal ion collector for their flame atomic absorption spectrometric determination

The silica gel modified with (3-aminopropyl-triethoxysilane) was reacted with 5-formyl-8-hydroxyquinoline (FHOQ_x) to anchor 8-quinolinol ligand on the silica gel. It was characterised with cross polarisation magic angle spinning (CPMAS) NMR and diffuse reflectance infrared Fourier transformation (DRIFT) spectroscopy and used for the preconcentration of Cu(II), Pb(II), Ni(II), Fe(III), Cd(II), Zn(II) and Co(II) prior to their determination by flame atomic absorption spectrometry. The surface area of the modified silica gel has been found to be 227 m² g⁻¹ and the two pKa values as 3.8 and 8.0. The optimum pH ranges for quantitative sorption are 4.0–7.0, 4.5–7.0, 3.0–6.0, 5.0–8.0, 5.0–8.0, 5.0–8.0 and 4.0–7.0 for Cu, Pb, Fe, Zn, Co, Ni and Cd, respectively. All the metals can be desorbed with 2.5 mol l⁻¹ HCl or HNO₃. The sorption capacity for these metal ions is in range of 92–448.0 μmol g⁻¹ and follows the order Cd3, NaCl, NaBr, Na₂SO₄ and Na₃PO₄, glycine, sodium citrate, EDTA, humic acid and cations Ca(II), Mg(II), Mn(II) and Cr(III) in the sorption of all the seven metal ions are reported. The preconcentration factors are 150, 250, 200, 300, 250, 300 and 200 for Cd, Co, Zn, Cu, Pb, Fe and Ni, respectively and t_1/2 values <1 min except for Ni. The 95% extraction by batch method takes ≤25 min. The simultaneous enrichment and determination of all the metals are possible if the total load of the metal ions is less than sorption capacity. In river water samples all these metal ions were enriched with the present ligand anchored silica gel and determined with flame atomic absorption spectrometer (R.S.D.≤6.4%). Cobalt contents of pharmaceutical samples (vitamin tablet) were preconcentrated with the present chelating silica gel and estimated by flame AAS, with R.S.D.1.4%. The results are in the good agreement with the certified value, 1.99 μg g⁻¹ of the tablets. Iron and copper in certified reference materials (synthetic) SLRS-4 and SLEW-3 have been enriched with the modified silica gel and estimated with R.S.D.<5%.     

Thin-Layer Chromatographic Separation of Some Allied Metal Ions and Their Determination by Ring Colorimetry

Abstract

Suitable methods have been worked out for the separation and determination of various groups of similar metal ions in mixtures, employing a combination of thin-layer chromatography and ring colorimetry. Solvent mixtures employed were: n-butanol + 12N HCl + dioxan (5:1:4); n-butanol + 6N HCl + dioxan (5:1:4); hexanol + dioxan + acetic acid + water (160:10:2:40); methanol + water (9:1 and 7:3). The following mixtures of cations were separated by TLC and the separated constituents were subsequently determined by ring colorimetry: Fe(III)- Co(II)- Cu(II)- Pb(II)- Ni(II); Pt(IV)- Co(II)- Cu(II)- Pd(II)- Ni(II); Ag(I)- Ni(II)- Co(II)- Fe(III); Cu(II)- Ni(II)- Bi(III); Cu(II)- Bi(III)- Hg(II).     

A selective chemosensor for detection of Ag(I) and Cu(I) based on an acenaphthoquinone derivative and its complexes

A new Schiff base, acenaphthoquinone bis(diphenylmethlenehydrazone) (L), was synthesized and employed as a chemosensor for detecting Ag(I) and Cu(I). Experimental results showed that the chemosensor exhibited high selectivity and sensitivity. The sensitivity of the chemosensor for Ag(I) or Cu(I) was not affected by other metal ions, such as Ni(II), Nd(III), Zn(II), Fe(III), Cu(II), Na(I), La(III), K(I), and Co(II). Complexes 1 and 2 were synthesized by coordination of L with Ag(I) and Cu(I), respectively. The crystal structures of 1 and 2 were determined by single-crystal X-ray diffraction. They had the same space group P2₁/c. Based on theoretical calculation, mechanism of the chemosensor detecting Ag(I) and Cu(I) was suggested.     

Adsorption of metal ions on activated carbon from aqueous solutions at pH 1-13

Adsorption of microgram amounts of 20 metal species on activated carbon powder from aqueous solutions of pH 1-13 was investigated. The species examined were Cs(I), Y(III), Ce(III), Ti(IV), Zr(IV), Cr(III), Cr(VI), Mn(II), Fe(III), Co(II), Ni(II), Ru(III), Cu(II), Ag(I), Zn(II), Cd(II), Al(III), Pb(II), Sb(III) and Bi(III).     

Chemically modified silica gel with aminothioamidoanthraquinone for solid phase extraction and preconcentration of Pb(II), Cu(II), Ni(II), Co(II) and Cd(II)

Silica gel chemically bonded with aminothioamidoanthraquinone was synthesized and characterized. The metal sorption properties of modified silica were studied towards Pb(II), Cu(II), Ni(II), Co(II) and Cd(II). The determination of metal ions was carried out on FAAS. For batch method, the optimum pH ranges for Pb(II), Cu(II) and Cd(II) extraction were ≥3 but for Ni(II) and Co(II) extraction were ≥4. The contact times to reach the equilibrium were less than 10 min. The adsorption isotherm fitted the Langmuir's model showed the maximum sorption capacities of 0.56, 0.30, 0.15, 0.12 and 0.067 mmol/g for Pb(II), Cu(II), Ni(II), Co(II) and Cd(II), respectively. In the flow system, a column packed modified silica at 20 mg for Pb(II) and Cu(II), 50 mg for Cd(II), 60 mg for Co(II), Ni(II) was studied at a flow rate of 4 and 2.5 mL/min for Ni(II). The sorbed metals were quantitatively eluted by 1% HNO₃. No interference from Na⁺, K⁺, Mg²⁺, Ca²⁺, Cl⁻ and SO₄²⁻ at 10, 100 and 1000 mg/L was observed. The application of this modified silica gel to preconcentration of pond water, tap water and drinking water gave high accuracy and precision (%R.S.D. ≤ 9). The method detection limits were 22.5, 1.0, 2.9, 0.95, 1.1 μg/L for Pb(II), Cu(II), Ni(II), Co(II) and Cd(II), respectively.     

Luminol-K2S2O8体系中金属离子化学发光行为的研究

报导了在自行设计的流动注射式化学发光分析仪上,对Luminal-K2S2O8体系中32种金属离子的化学发光行为的系统研究.确定了对金属离子的最优测定条件以及大多数金属离子的检出极限和线性范围.     

High-Performance Liquid Chromatography of Copper,Mercury, Nickel,and Cadmium Bisdibenzyldithiocarbamate Complexes

Abstract

High-performance liquid chromatographic separations of Cu (II), Hg(II), Ni(II), and Cd(II) bisdibenzyldithiocarbamates at nanogram levels by adsorption chromatography on silica gel were reported. Lichrosorb Si 60 (10 um) was used as the stationary phase and benzene-cyclohexane mixtures as the mobile phase.     

Non-aqueous,reversed-phase,high-performance,thin-layer chromatography and column liquid chromatography of metal complexes of porphine

Summary The chromatographic mobility of 21H, 23H-porphine and its Ni(II), Cu(II), Zn(II) and Pd(II) complexes were investigated by high-performance thin-layer chromatography on an octadecyl-bonded, silica gel plate with various polar organic solvents including alcohols, acetonitrile, dimethylsulfoxide and propylenecarbonate. The mobility generally decreases according to the central metal ion of the complex as follows: Zn(II)>(free porphine)>Ni(II)>Pd(II)>Cu(II). Methanol is a good choice of solvent for the separation of these metal porphine complexes. Successful separation of porphine and the four metal complexes is accomplished within 13 min on a LiChrosorb RP-18 column with methanol eluent.     

Dynamic Adsorption and Desorption Behaviors of Cu(II), Ag(I), and Au(III) on Silica Gel Microspheres Encapsulated by Salicylic Acid–Functionalized Polystyrene

Composite material silica gel microspheres encapsulated by salicylic acid functionalized polystyrene(SG–PS–azo–SA) have been synthesized, and the dynamic adsorption and desorption properties of this silica gel matrix inorganic–organic composite material for Cu(II), Ag(I), and Au(III) have been investigated. The results displayed that SG–PS–azo–SA had excellent adsorption for Cu(II), and the film diffusion dominated the adsorption process of SG–PS–azo–SA for Cu(II), Ag(I), and Au(III). These metal ions could be desorbed with the eluent solution of 2.5 mol/L HCl, 3% thiourea in 0.5 mol/L HCl, and 0.5% thiourea in 1 mol/L HCl, respectively. When the elution was carried out for 30 min, 30 min, and 132 min, the desorption ratio ω could reach 91.1%, 99.4%, and 60.84%, respectively. Thus, silica gel encapsulated by polystyrene coupled with salicylic acid (SG–PS–azo–SA) is favorable and useful for the removal of metal ions Cu(II), Ag(I), and Au(III), and the high adsorption capacity make it a promising candidate material for the metal ions removal.     

Sorption of transition metals by silica gel with fixed amide of maleic acid and polyhexamethyleneguanidine on the surface

The possibility was determined for covalent binding of amide of maleic acid and polyhexamethyleneguanidine to a silica gel surface previously activated with cyanur chloride. Adsorption of Zn(II), Cd(II), Pb(II), Cu(II), Mn(II), Ni(II), Fe(III), and Co(II) cations from aqueous solution with a modified silica obtained was studied. The possibility of subsequent formation on the surface of mixed ligand complexes     

High-performance thin-layer chromatography of metal complexes ofmeso-tetrakis(p-tolyl)porphyrin on cellulose and silica gel

Summary The migration behavior of metal complexes ofmeso-tetrakis(p-tolyl)porphyrin (TTP) are studied in HPTLC systems with cellulose and silica gel thin-layers and various organic solvents of relatively low polarity. The mobility of the metal complex tends to increase in the following orders of its central-metal elements: on cellulose, Mg(II)<Zn(II)<V(IV)<(H)<Pd(II)< Ni(II)Cu(II); on silica gel, Mg(II)<V(IV)<Zn(II)= (H)<Ni(II)Pd(II)Cu(II). Recommendable phase system for the separation of metal-TTP complexes is a combination of silica gel thin-layer with a carbon disulfide-m-xylene mixture though the complexes of Ni, Cu and Pd are not completely resolved.