Principal Component‐Wavelet Neural Network as a Multivariate Calibration Method for Simultaneous Determination of Iron,Nickel, and Cobalt

Abstract

Principal component‐artificial neural network (PC‐ANN) and principal component‐wavelet neural network (PC‐WNN) are applied for simultaneous determination of iron(II), nickel(II), and cobalt(II). A simple and selective spectrophotometric method for simultaneous determination of iron(II), nickel(II), and cobalt(II) based on formation of their complexes with 1‐(2‐pyridylazo)‐2‐naphtol (PAN) in micellar media is described. Although the complexes of Fe(II), Ni(II), and Co(II) with reagent show a spectral overlap, they have been simultaneously determined by PC‐ANN and PC‐WNN. The results obtained by the two methods were compared and it was shown that in PC‐WNN, the convergence speed was faster and the root mean square error of prediction set was also smaller than PC‐ANN. Interference effects of common anions and cations were studied and the proposed method was also applied satisfactorily to the determination of Fe(II), Ni(II) and Co(II) in synthetic samples.     

Simultaneous Spectrofluorimetric Determination of Paracetamol and Caffeine in Pharmaceutical Preparations in Solid‐Phase Using Partial Least Squares Multivariate Calibration

Abstract

Partial least‐squares algorithm (PLS)‐1 was used for the solid‐phase spectrofluorimetric determination of paracetamol (PA) and caffeine (CF) in pharmaceutical formulations. In despite of the closely overlapping spectral bands, the method allows the simultaneous quantification and sample preparation prior to analysis is not required. The calibration set consisted of 96 samples with 100–400 mg/g^?1 PA plus 10–65 mg/g^?1 CF; another set of 25 samples was used for external validation. Agreement between predicted and experimental concentrations was fair (r=0.993 and 0.964 for PA and CF models). Prediction performance was evaluated in terms of the coefficient of variability (CV), relative predictive determination (RPD), and ratio error range (RER). The PLS‐1 model was used for the determination of PA and CF in pharmaceutical formulations.     

Efficient Chemical Syntheses of Branched Cyclomalto‐Oligosaccharides Using the Trichloroacetimidate Method

Glycosylation using the trichloroacetimidate method was investigated in order to synthesize branched cyclomalto‐oligosaccharides (cyclodextrins, CDs). We examined the chemical syntheses of galactosyl CDs, directly β‐linked to the CD ring, which could not be synthesized by enzyme catalyzed reactions. We prepared 6‐O‐(d‐galactosyl)‐γCD and 6‐O‐(d‐mannosyl)‐γCD as basic model compounds using a combination of protecting groups on the glycosyl donor, catalysts to synthesize imidate derivatives, and catalysts for glycosylation. The configurational isomers were determined by HPLC and NMR spectroscopy.     

Correlation of Quantitative Structure and Inhibition Phytotoxicity for Aromatic Compounds Using Ab Initio Method

1 INTRODUCTION Quantitative structure-activity relationship (QSAR) is one of the necessary methods to evaluate the ha- zards of organic chemicals. QSAR equation could be employed to forecast the biological activity of un- known compounds, which is significant for initial screening and evaluation of toxic compounds[1]. Aro- matic compounds are toxic organic compounds with relatively low water solubility, and their structure- activity relationship has been investigated with AM1 method[2]…     

Simultaneous Determination of Levomepromazine Hydrochloride and Its Sulfoxide by UV‐Derivative Spectrophotometry and Bivariate Calibration Method

Abstract

Two spectrophotometric methods are proposed for the simultaneous quantification of levomepromazine hydrochloride (LV) and its main degradation product levomepromazine sulfoxide (LV‐SO). One of them is based on the first order derivative spectra generated by the Savitzky‐Golay algorithm (third‐order polynomial degree, Δλ=10 nm). Determination of levomepromazine hydrochloride and its sulfoxide was realized by measurements of amplitudes of derivative spectra at 332 nm and 278 nm, respectively. The Beer law was obeyed in the concentration range 1.5–50 µg/mL for LV and 2.5–50 µg/mL for LV‐SO. The second of the proposed methods utilized the bivariate calibration algorithm. The determination was performed at 302 nm for levomepromazine and at 334 nm for sulfoxide. The elaborated methods allowed determination of LV in the concentration range 1.0–25 µg/mL while LV‐SO was determined in the concentration range 2.0–50 µg/mL.     

Synthesis and Biological Evaluation of Novel Isonucleosides with 1,2,4‐Triazole‐3‐Carboxamide

Novel 1,2,4‐triazole isonucleosides (1 and 2) were efficiently synthesized starting from D‐ribose and D‐xylose, respectively. The key steps were condensation of cyclic sulfate 8 with methyl‐1,2,4‐triazole‐3‐carboxylate and nucleophilic displacement of the tosylate 15 with methyl‐1,2,4‐triazole‐3‐carboxylate, respectively.     

Efficient and Convenient Method for the Synthesis of N‐Arylhydrazones using a Palladium‐Catalyzed Bond‐Forming Reaction

A highly effective, convenient, and reproducible industrial process for palladium‐catalyzed carbon–nitrogen cross coupling has been developed and applied on a large scale. Thus various functionalized N‐arylhydrazones have been easily prepared and well characterized by conventional spectroscopic methods.     

Development of a Solid‐Phase Extraction‐Enzyme‐Linked Immunosorbent Assay Method with a New Sorbent of Multiwall Carbon Nanotube for the Determination of Estrone in Water

Abstract

A sensitive solid‐phase extraction‐enzyme‐linked immunosorbent assay (SPE‐ELISA) method was developed to analyze the estrone in environmental water. A new SPE sorbent of the multiwall carbon nanotube was tested and proved to have similar adsorbability for estrone comparing to the commercial C₁₈ SPE. A specific polyclonal antibody for estrone (A‐E1) and a broad‐spectrum antibody for estrone, estradiol and estriol (A‐E2) were produced. For A‐E1, the limit detection of estrone was 0.04 µg/l and for A‐E2 were 0.07, 0.04 and 0.2 µg/l of estrone, estradiol and estriol, respectively. Different river water samples were analyzed by ELISA and HPLC method.     

Generalized Method for the Production of 1,3‐Benzoxazine, 1,3‐Benzothiazine,and Quinazoline Derivatives from 2‐(Hydroxy,Thio, or Amino) Aromatic Acids Using Triphenylphosphine Thiocyanogen

Abstract

A modified one‐pot method was developed for the synthesis of 1,3‐benzoxazines, in which the preparation of unstable thiocyanogen was omitted. The method was found to be general for substituted (methyl, methoxy, halo, and hydroxy) 2‐hydroxy benzoic acids and 2‐hydroxy naphthoic acids. The method was extended to 2‐thio, 2‐amino, and N‐methyl aminobenzoic acid with which the synthesis of 1,3‐benzothiazine and quinazoline derivatives has been achieved, respectively. It was also found that 3‐hydroxypyridine‐2‐carboxylic acid and 2‐hydroxynicotinic acid using a modified method gave 2‐thioxo‐2,3‐dihydro‐4H‐pyrido[2,3‐e][1,3]oxazin‐4‐one and 2‐thioxo‐2,3‐dihydro‐4H‐pyrido[3,2‐e][1,3]oxazin‐4‐one, respectively. The structures of the new compounds were confirmed by the analysis of their IR, ¹H, and ¹³C NMR spectra.     

New Approach for the Synthesis of N‐Indolyl Ketones and Aldehydes

A new approach for the synthesis of N‐indolyl ketones and aldehydes was developed. In the reaction of N‐indolyl carboxylic acids with alkyl lithium, an interesting phenomenon appeared when using THF as solvent instead of ethyl ether.     

Efficient Method for the Synthesis of Benzimidazoquinazoline Derivatives with Three‐Point Diversity

An efficient strategy for the preparation of a novel heterocyclic ring system of benzimidazoquinazolines with three‐point diversity has been described. The compounds were obtained by treating o‐phenylene diamines with o‐nitrobenzaldehyde to give benzimidazoles, followed by reduction of the nitro group to give an amine. Derivatization of the resulting amine with isothiocyanates followed by in situ cyclodesulfurization at rt furnished the title compounds in high yields and purities.     

A Method for Multiconformational Modeling of the Three‐Dimensional Shape of a Molecule

A method for multiconformational modeling of the threedimensional shape of a molecule is proposed that includes search for conformers, their optimum superposition, and analysis of spatial features of the resulting structure. The method allows one to determine features of various molecular conformations of compounds under study, to assess the contributions of conformers to particular properties of the substance, to evaluate the space occupied by the molecule, and to compare the average size of the multiconformational model of the molecule with the sizes of the most stable conformations. The potentials of the model are illustrated by density calculations for 137 organic liquids.     

Post‐chemiluminescence Method of the Determination of Loperamide Hydrochloride in Human Plasma and Pharmaceutical by Using Dichlorofluorescein as Chemiluminescence Reagent

Abstract

A post‐chemiluminescence (PCL) was observed when loperamide hydrochloride solution was injected into the reaction mixture after the finish of CL reaction of alkaline N‐Chlorosuccinimide (NCS) and dichlorofluorescein. Based on this phenomenon, a simple, sensitive and fast flow injection PCL method was established for the determination of loperamide hydrochloride. The possible mechanism for the PCL reaction was discussed via the investigation of the CL kinetic characteristics, the CL spectra, the fluorescence spectra. The PCL intensity responded linearly to the concentration of loperamide hydrochloride in the range 8.0×10^?10 to 6.0×10^?7 g · ml^?1 with a linear correlation of 0.9995. The detection limit was 4×10^?10 g · ml^?1. The relative standard deviation was 2.4% for 4.0×10^?8 g · ml^?1 loperamide hydrochloride (n=11). This method has been applied to the determination of loperamide hydrochloride in human plasma and pharmaceutical samples with satisfactory results.     

Facile and Efficient Method for the Prins Reactions of Styrenes and Homoallyl Alcohols to 1,3‐Dioxanes and 4‐Tetrahydropyranols Using Bismuth(III) Triflate

Abstract

Bismuth(III) triflate has been found to be an efficient catalyst for the Prins reactions of styrenes and homoallyl alcohols, the reaction proceeds rapidly and affords the corresponding 1,3‐dioxanes and tetrahydropyran‐4‐ol in good yields. Scope and limitations of the styrenes and homoallyl alcohols are reported.     

Alternative Synthesis of C60‐Diphenylaminofluorene Derivatives for Nonlinear Photonic Applications: Method of Preparation and Characterization

An alternative synthetic route for the preparation of key intermediate synthons 7‐α‐bromoacetyl‐2‐diphenylaminofluorene (α‐BrDPAF‐H) and 7‐α‐bromoacetyl‐9,9‐dialkyl‐2‐diphenylaminofluorene (α‐BrDPAF‐C_n) was demonstrated. The latter reactions involved the first step of dialkylation of 2‐bromofluorene at C₉ position of the fluorene moiety, the second step of a diphenylamino group attachment at C₂ position of the resulting dialkylfluorene, and the third step of Friedel‐Craft acylation of α‐bromoacetyl group at C₇ position of dialkylated diphenylaminofluorene. From the intermediates α‐BrDPAF‐H and α‐BrDPAF‐C_n, a series of C₆₀‐keto‐DPAF nanostructures, such as the fullerene monoadducts C₆₀(>DPAF‐H) and C₆₀(>DPAF‐C_n), where n is 2, 4, or 10, were synthesized in a reasonable yield. Molecular mass ions of the dyads C₆₀(>DPAF‐H), C₆₀(>DPAF‐C₂), C₆₀(>DPAF‐C₄), and C₆₀(>DPAF‐C₁₀) were clearly detected in positive ion matrix‐assisted laser desorption ionization mass spectrum (MALDI–MS) that confirmed the composition mass of each compound synthesized.     

Effect of Emulsification Method on the Properties of Lecithin‐ and PGPR‐Stabilized Water‐in‐Oil‐Emulsions

Water‐in‐oil (w/o) emulsions were prepared with phosphatidylcholine‐depleted lecithin or polyglycerol polyricinoleate (PGPR) as emulsifying agents. The effect of different laboratory emulsification devices and the effect of sodium chloride on particle size distribution, coalescence stability, and water droplet sedimentation were investigated. The properties of lecithin‐stabilized w/o emulsions were found to depend more strongly on the emulsifying method than those prepared with PGPR. The rotor‐stator system was not suitable for preparing stable w/o emulsions with lecithin. Whereas the addition of salt was essential to achieve coalescence‐stable emulsions prepared with PGPR, the presence of NaCl favored the coalescence of water droplets and phase separation in emulsions containing lecithin.     

Polyimide‐Polydimethylsiloxane Copolymers. Evaluation of the Thermal and Electrical Properties

Poly(dimethylsiloxane‐amic‐acid)s have been prepared starting from a fluorinated dianhydride, namely 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, and a mixture of an aromatic diamine and bis(aminopropyl)‐oligodimethylsiloxane of controlled molecular weight, in different ratios. A solution imidization procedure was used to convert them quantitatively to the corresponding polyimides. The polymers, easily soluble both in polar (N‐methylpyrrolidone) and less polar (chloroform) solvents, were prepared for film‐forming by casting from solution. The thermal behavior in dependence on composition was evaluated by thermogravimetric analysis and differential scanning calorimetry. The kinetic processing of thermogravimetric data was carried out using the Flynn‐Wall‐Ozawa and Kissinger methods. Electrical insulating properties of some polymer films were evaluated on the basis of dielectric constant and dielectric loss tangent and their variation with frequency.     

Spectrophotometric Determination of Some Fluoroquinolone Derivatives in Dosage Forms and Biological Fluids Using Ion‐Pair Complex Formation

Abstract

A simple, rapid, sensitive, and reproducible procedure for assaying norfloxacin (NOR), ciprofloxacin (CIP), and ofloxacin (OFL) was investigated. The procedure is based on the reaction of selected drugs with Sudan II (I), Congo red (II), and Gentian violet (III) in universal buffer to give soluble ion‐pair complexes. The effects of various parameters have been studied. Beer's law plots were obeyed in the concentration ranges 0.5–11 µg ml^?1, whereas Ringbom optimum ranges were 0.7–9.5 µg ml^?1. The apparent molar absorptivity (6.4×10⁴ L mol^?1 cm^?1), Sandell sensitivity (4.99 ng cm^?2), detection (0.13 µg ml^?1), and quantification (0.44 µg ml^?1) limits were calculated. The relative standard deviation for ten determinations, for samples containing 4.0 µg ml^?1, was found to be 1.40%. The influence of commonly employed excipients in the determination of the studied drugs was examined. There was no interference from degradate product results from thermal and hydrolytic treatments. The results obtained by the proposed procedure were statistically validated. The developed procedure was successfully applied to the determination of the studied drugs in dosage forms and biological fluids.     

Authentication of Dendrobium Species Using Near-Infrared and Ultraviolet–Visible Spectroscopy with Chemometrics and Data Fusion

Herbal products produced from multiple plants have special characteristics in the clinical practice of traditional Chinese medicine. These traits provide the opportunity for fraudulent merchants to mix other herbal products similar in appearance into authentic herbal medicine. Shihu is a tonic herbal medicine from the Dendrobium plants with complex botanical origins. In this context, 11 Dendrobium plants including 109 individuals from China were collected for authentication work. Nine species have been described as herbal medicines in the literature while D. hookerianum and D. xichouense are not reported to have medicinal benefits. A key feature of this study was that multiple recognition approaches, based on near-infrared and ultraviolet–visible spectra as well as their combination, were compared to investigate their classification performance. Intuitively, score plots using principal component analysis and hierarchical cluster diagrams were used to evaluate the genetic relationships among these species. Compared with support vector machine discrimination analysis and k-nearest neighbor models, the partial least square discrimination analysis model combined with low-level data fusion provided excellent performance for authentication and was the most robust model with 100% accuracy rates for the training and prediction sets. The results indicated that near-infrared and ultraviolet–visible spectra and their fusion dataset combined with supervised recognition analysis are effective and therefore recommended for the authentication of genuine and sham of herbal Shihu species.     

New Approach to Analysis of the Nonlinearity of the Brønsted Relationship: II. An Empirical Procedure Combining the σρ Correlation Method with the Concept of Hard and Soft Acids and Bases,as Applied to Pseudo CH Acids

A comparative systematic analysis of the features of Brönsted behavior of pseudo CH acids(according to Eigen's classification) is made. The analysis is based on combined use of experimental data onpK _a, Ggas, logk _D of CH acids (Ggas is the free energy of acid ionization in the gas phase, logk _D isthe logarithm of the rate constant of hydrogen exchange in a protic solvent). The modified nucleophilicKabachnik constants ^- are applicable to correlations for all the three kinds of acidity of pseudo CH acids. The electrostatic solvation makes an insignificant contribution to variation of pK _a and weakening of the substituent effect in going from the gas phase to dimethyl sulfoxide, and also to differentiation of the kinetic acidity. The coefficient in the Brönsted equation and the ratio between the rate constants in the correlations, which characterize the degree of proton transfer in the reaction transition state, have much in common from the physical viewpoint. The results of correlation analysis, demonstrating intramolecular uniformity of the interactions, are fully consistent with the conclusion made in the previous part of this work about the solvation uniformity of the interactions, resulting in the absence of thermodynamic deviations from the Brönsted relationship.