Concentrations and Sources of Polycyclic Aromatic Hydrocarbons in Water and Sediments from the Huaihe River,China

Surface water and sediments were collected from eleven locations on the middle region of Huaihe River to evaluate the environmental effects of urban and industrial activities. The concentrations of sixteen polycyclic aromatic hydrocarbons (PAHs) in water and sediments were between 1.2–5.1 µg/L and 72–139 ng/g, respectively. High levels of PAHs in water were recorded in comparison to those of other countries, while the concentrations in sediments were low to moderate levels. A weak positive correlation was observed (R² = 0.49, P = 0.13) between PAHs and total organic carbon in water. However, a significant positive correlation (R² = 0.79, P = 0.004) was found in sediments, which indicated that total organic carbon was a factor in PAH levels in sediments but not in water. The parent ratios were studied by principal component analysis that showed the PAHs from water were predominantly derived from coal combustion (34%), oil spills (49%), and vehicular emissions (17%), while the major PAH sources to sediments were coal combustion. Using the ecological toxic equivalency factor index, it was concluded that the PAHs levels may provide a potential risk in water but not in sediments.     

A Routine Method for the Quantitative Determination of Polycyclic Aromatic Hydrocarbons (PAHs) in Urban Air

Abstract

We have developed a method for the quantitative determination of polycyclic aromatic hydrocarbons (PAHs) present in urban air, which can be performed rather quickly, and which uses a minimal amount of solvents.

Air samples were collected using a home-made low-volume air sampler equipped with glass fibre filter and polyurethane foam plugs. After Soxhlet extraction a liquid-liquid partition was carried out to isolate the PAH fraction. This liquid-liquid partition was performed in micro-scale, enabling us to use small quantities of the solvents and to separate the solution layers very rapidly using a centrifuge. Sample clean-up was accomplished on a high performance liquid chromatograph equipped with two normal phase silica columns. The losses of all investigated PAHs occurring during the various steps of sample clean-up have been determined. The qualitative and quantitative determination of the PAHs was carried out by capillary gas chromatography; the results were confirmed by GC/MS measurements.

The analytical procedure described was applied over a period of one year to measure the concentrations of 21 PAHs in the city of Vienna at a site with high traffic density. The concentrations of the four more volatile PAHs were determined on a semi-quantitative basis. The ratio of two selected PAHs was used to estimate the respective contribution of traffic and domestic heating to the total PAH level at the sampling site.     

Temporal variation of atmospheric polycyclic aromatic hydrocarbon concentrations in PM10 from the Kathmandu Valley and their gas-particle concentrations in winter

The concentrations of polycyclic aromatic hydrocarbons (PAHs) in particulate matter (PM) with a diameter <10 µm (PM₁₀, 50% cut off) were investigated in the Kathmandu Valley, Nepal, during 2003. In order to understand the dynamics of atmospheric PAHs in winter, the PAH concentrations in total PM and in the gaseous phase were investigated in the valley in December 2005. Total of 45 PAH compounds (∑45PAHs) were analysed by high-resolution gas chromatography/high-resolution mass spectrometry (HRGC/HRMS). In 2003, the ∑45PAH concentrations in PM₁₀ ranged between 4.3 and 89 ng m^?3 (annual average; 27 ± 24 ng m^?3). The average concentrations of ∑45PAHs in December 2005 were 210 ± 33 ng m^?3 in total PM and 430 ± 90 ng m^?3 in the gaseous phase. The ∑45PAH concentration in PM accounted for more than 30% of the sum of their particulate and gaseous forms. Phenanthrene (Ph) was the most predominant compound in the gaseous phase, whereas four- to seven-ring PAHs were predominant in total PM. The highest values of ∑45PAHs occurred in the winter and spring. Estimates of emission sources based on diagnostic molecular ratios showed that atmospheric PAHs in the Kathmandu Valley mainly originated from the exhaust gas of diesel engine. In the winter and spring, PAH pollution would be accelerated by the operations of brick kilns and the frequent formation of an atmospherically stable layer in the valley.     

Comparison of immunoassay and gas chromatography-mass spectrometry for measurement of polycyclic aromatic hydrocarbons in contaminated soil

Polycyclic aromatic hydrocarbons (PAHs) are frequently encountered in the environment and may pose health concerns due to their carcinogenicity. A commercial enzyme-linked immunosorbent assay (ELISA), was evaluated as a screening method for monitoring PAHs at contaminated sites. The ELISA was a carcinogenic PAH (C-PAH) RaPID assay testing kit that cross-reacts with several PAHs and utilizes benzo[a]pyrene (BaP) as a calibrator. Soil samples were extracted with 50% acetone in dichloromethane (DCM) for analysis by ELISA and gas chromatography-mass spectrometry (GC-MS). The overall method precision was within ±30% for ELISA and within ±20% for GC-MS. Recovery data for spiked soils ranged from 46 to 140% for BaP as determined by ELISA. Recoveries data of the GC-MS surrogate standards, 2-fluorobiphenyl and chrysene, were greater than 70%. The GC-MS procedure detected a total of 19 priority PAHs (2-6-ring PAHs) including seven probable human carcinogens (4-6-ring B2-PAHs). The ELISA results were compared to GC-MS summation results for the total 19 target PAHs as well as for the subset of the seven B2-PAH compounds. For all soil samples, the PAH concentrations derived from ELISA were greater than the sum of B2-PAH concentrations obtained by GC-MS. ELISA determinations were also frequently greater than the results obtained by GC-MS for the total 19 PAH compounds. This discrepancy can be expected, since the ELISA is a screening assay for the detection of several related PAHs while the GC-MS procedure detects priority PAH compounds. Thus, only a subset of PAHs (e.g. 19 PAHs) in the soil samples were measured by GC-MS while additional PAHs, including alkylated PAHs, and PAH derivatives have been demonstrated to be cross-reactive in the C-PAH ELISA. Results of paired tests show that the PAH data from ELISA and GC-MS methods are significantly different (P<0.001), but highly correlated. The ELISA data had a strong positive relationship with the GC-MS summation data for the B2-PAHs as well as for the 19 PAHs targeted by the GC-MS method. Results indicate that the ELISA may be useful as a broad screen for monitoring PAHs in environmental samples.     

An Assessment of Mass Flows,Removal and Environmental Emissions of Bisphenols in a Sequencing Batch Reactor Wastewater Treatment Plant

This study analyzed 16 bisphenols (BPs) in wastewater and sludge samples collected from different stages at a municipal wastewater treatment plant based on sequencing batch reactor technology. It also describes developing an analytical method for determining BPs in the solid phase of activated sludge based on solid-phase extraction and gas chromatography-mass spectrometry. Obtained concentrations are converted into mass flows, and the biodegradation of BPs and adsorption to primary and secondary sludge are determined. Ten of the sixteen BPs were present in the influent with concentrations up to 434 ng L⁻¹ (BPS). Only five BPs with concentrations up to 79 ng L⁻¹ (BPA) were determined in the plant effluent, accounting for 8 % of the total BPs determined in the influent. Eleven per cent of the total BPs were adsorbed on primary and secondary sludge. Overall, BPs biodegradation efficiency was 81%. The highest daily emissions via effluent release (1.48 g day⁻¹) and sludge disposal (4.63 g day⁻¹) were for BPA, while total emissions reached 2 g day⁻¹ via effluent and 6 g day⁻¹ via sludge disposal. The data show that the concentrations of BPs in sludge are not negligible, and their environmental emissions should be monitored and further studied.     

Source Apportionment Research of Fine Particulate Matter in the Atmosphere by PAHs

Haze weather frequently occurs in many cities in China. Polycyclic aromatic hydrocarbons(PAHs) in fine particulate matter(PM_2.5) can adversely affect the environment and human health. In this paper, PM_2.5 samples were collected at nine sites in a city in northeastern China from September 2013 to October 2014. Sixteen USEPA(US Evironment Protection Agency) priority PAHs in PM_2.5 were analyzed to determine their spatial and temporal distribution characteristics. The source apportionment of PAHs was conducted with the Positive Matrix Factorization(PMF) model. The results indicate that the concentrations of total PAHs(T-PAHs) in PM_2.5 are within the range of 0.26 to 72.48 ng/m³. The seasonal variation of T-PAHs is winter >spring >autumn >summer, and the space distribution of PAHs is JZP >DP >BFH >LP >EESA >IPT >CP >HZMC >JYP. In all types of PAHs, three-ring and five-ring PAHs are significantly prominent(62%) in the heating period due to petrogenic sources and traffic emissions. Middle- and high-ring PAHs in the non-heating period are caused by coal combustion and vehicle exhaust, which accounts for 77% of the total emissions. The source apportionment results obtained by the diagnostic ratio of PAHs reflect that coal burning, traffic and other sources have a distinct influence on PAH emissions in this city. Six factors are defined by PMF v5.0, namely, coke oven emissions(7.7%), biomass burning(44.3%), petrogenic sources(10.7%), coal combustion(10.4%), gasoline engine emissions(16.7%), and diesel engine emissions(10.3%). The results indicate that the PAHs in PM_2.5 in the city are primarily caused by combustion processes and vehicle exhaust.     

The application of an in vitro gastrointestinal extraction to assess the oral bioaccessibility of polycyclic aromatic hydrocarbons in soils from a former industrial site

The total and bioaccessible concentration of 16 polycyclic aromatic hydrocarbons (PAHs) in soil from a former industrial site was investigated. Typical total concentrations across the sampling sites ranged from 1.5 mg kg⁻¹ for acenaphthylene up to 243 mg kg⁻¹ for fluoranthene. The oral bioaccessibility of PAHs in soil was assessed using an in vitro gastrointestinal extraction (Fed Organic Estimation human Simulation Test, FOREhST method). The oral bioaccessibility data indicated that fluorene, phenanthrene, chrysene, indeno(1,2,3-cd)pyrene and dibenzo(a,h)anthracene had the highest % bioaccessible fraction (based on their upper 75th percentile values being >60%) while the other PAHs had lower % bioaccessible fractions (means ranging between 35 and 59%). Significantly lower bioaccessibilities were determined for naphthalene. With respect to method validation and inter-laboratory comparison, the total and bioaccessible concentrations of benzo(a)anthracene, benzo(b)anthracene, benzo(k)fluoranthene, benzo(a)pyrene, indeno(1,2,3-cd)pyrene and dibenzo(a,h)anthracene was compared to published data derived using the same samples. The total PAH concentrations at the site were compared with generic assessment criteria (GAC) using the residential land use scenario (with plant uptake at 6% soil organic matter). Concentrations of 7 of the PAHs investigated within the soils could lead to an unacceptable risk to human health at this site.     

A review of monitoring of airborne polycyclic aromatic hydrocarbons: An African perspective

In this review, we focus on the status of the monitoring of polycyclic aromatic hydrocarbons (PAHs) in ambient air as well as in living (indoor) and working environments in Africa from 2000 to 2018. This is important as PAHs are ubiquitous in the environment and are known to be potentially carcinogenic. Aspects of sampling such as collection media for particle bound and gaseous PAHs are discussed. The efficiency and basic quality assurance data of commonly employed extraction techniques for separating target PAHs from sampling media using conventional solvent-based and emerging solvent-free approaches were also evaluated. Polyurethane foam and quartz fiber filters are generally the most commonly used collection media for gaseous and particle bound PAHs, respectively. A wide range of total PAH concentrations in ambient air has been reported across the continent of Africa, with the highest levels found at sampling sites close to high density traffic and industrial areas. A rapidly increasing population, commercial and industrial development, poor urban transportation infrastructure and the use of low quality oil products were the main causes of high total gas and particulate PAH concentrations (1.6–103 μg/m³) in West African port cities such as Cotonou, Benin. With regards to indoor environments, gas phase PAHs were detected at the highest total concentrations in rural areas ranging from 1 to 43 μg/m³ in Burundi with naphthalene being the most prevalent. Firewood burning was the major emission source in most developing countries and resulted in benzo[a]pyrene concentrations above the European permissible risk level of 1 ng/m³.     

Determination of polycyclic aromatic hydrocarbons in coastal sediments from the Porto region (Portugal) by microwave-assisted extraction, followed by SPME and GC-MS

A simple low-cost, analytical method based on microwave-assisted extraction of sediments, followed by solid phase micro-extraction and gas chromatography mass spectrometry, was developed and validated for the quantification of sixteen polycyclic aromatic hydrocarbons (PAHs) in marine and estuarine sediment samples. The PAHs were those included in the United States Environmental Protection Agency (US EPA) priority list. Method detection limits were between 0.07 and 0.76 μg/kg dry weight (dw), which makes the current method suitable for environmental analysis. Sediments screened for PAHs from the Douro River estuary and the Porto seacoast exhibit total concentrations that ranged from 58.98 to 156.45 μg/kg dw, and from 51.98 to 54.79 μg/kg dw, respectively. The presence of almost all human carcinogenic PAHs in the analyzed areas indicate that these sediments can be considered polluted, suggesting that future monitoring programs together with an effective coastal management program must be implemented to guarantee the safe usage of the current areas for fishing and bathing.     

The Application of Active Biomonitoring with the Use of Mosses to Identify Polycyclic Aromatic Hydrocarbons in an Atmospheric Aerosol

The use of biological indicators of environmental quality is an alternative method of monitoring ecosystem pollution. Various groups of contaminants, including organic ones, can be measured in environmental samples. Polycyclic aromatic hydrocarbons (PAHs) have not yet been determined by the moss bag technique. This technique uses several moss species simultaneously in urban areas to select the best biomonitoring of these compounds, which are dangerous to humans and the environment. In this research, a gas chromatography coupled with mass spectrometry was used for the determination of selected PAHs in three species of mosses: Pleurozium schreberi, Sphagnum fallax and Dicranum polysetum (active biomonitoring) and for comparison using an air filter reference method for atmospheric aerosol monitoring. The chlorophyll fluorescence of photosystem II (PSII) was also measured to assess changes in moss viability during the study. As a result of the study, the selective accumulation of selected PAHs by mosses was found, with Pleurozium schreberi being the best bioindicator—9 out of 13 PAHs compounds were determined in this species. The photosynthetic yield of photosystem (II) decreased by 81% during the exposure time. The relationship between PAHs concentrations in mosses and the total suspended particles (TSP) on the filter indicated the possibility of using this bioindicator to trace PAHs in urban areas and to apply the moss bag technique as a method supporting classical instrumental air monitoring.     

Air pollution from traffic emissions in Oporto, Portugal: Health and environmental implications

Air pollution represents a serious risk not only to environment and human health, but also to historical heritage. In this study, air pollution of the Oporto Metropolitan Area and its main impacts were characterized. The results showed that levels of CO, PM₁₀ and SO₂ have been continuously decreasing in the respective metropolitan area while levels of NO_x and NO₂ have not changed significantly. Traffic emissions were the main source of the determined polycyclic aromatic hydrocarbons (PAHs; 16 PAHs considered by U.S. EPA as priority pollutants, dibenzo[a,l]pyrene and benzo[j]fluoranthene) in air of the respective metropolitan area. The mean concentration of 18 PAHs in air was 69.9 ± 39.7 ng m⁻³ with 3-4 rings PAHs accounting for 75% of the total Σ_PAHs. The health risk analysis of PAHs in air showed that the estimated values of lifetime lung cancer risks considerably exceeded the health-based guideline level. Analytical results also confirm that historical monuments in urban areas act as passive repositories for air pollutants present in the surrounding atmosphere. FTIR and EDX analyses showed that gypsum was the most important constituent of black crusts of the characterized historical monument Monastery of Serra do Pilar classified as “UNESCO World Cultural Heritage”. In black crusts, 4-6 rings compounds accounted approximately for 85% of Σ_PAHs. The diagnostic ratios confirmed that traffic emissions were the major source of PAHs in black crusts; PAH composition profiles were very similar for crusts and PM₁₀ and PM_2.5.     

Nonpolar organic compounds in fine particles: quantification by thermal desorption–GC/MS and evidence for their significant oxidation in ambient aerosols in Hong Kong

Nonpolar organic compounds (NPOCs) in ambient particulate matter (PM) commonly include n-alkanes, branched alkanes, hopanes and steranes, and polycyclic aromatic hydrocarbons (PAHs). The recent development of thermal desorption-gas chromatography/mass spectrometry (TD-GC/MS) has greatly reduced time and labor in their quantification by eliminating the laborious solvent extraction and sample concentration steps in the traditional approach that relies on solvent extraction. The simplicity of the TD-GCMS methods has afforded us concentration data of NPOCs in more than 90 aerosol samples in two aerosol field studies and 20 vehicular emissions-dominated source samples in Hong Kong over the past few years. In this work, we examine the interspecies relationships between select NPOCs and their concentration ratios to elemental carbon (EC) among the ambient samples and among the source samples. Our analysis indicates that hopanes were mainly from vehicular emissions and they were significantly oxidized in ambient PM. The hopane/EC ratio in ambient samples was on average less than half of the ratio in vehicular emissions-dominated source samples. This highlights the necessity in considering oxidation loss in applying organic tracer data in source apportionment studies. Select PAH/EC ratio–ratio plots reveal that PAHs had diverse sources and vehicular emissions were unlikely a dominant source for PAHs in Hong Kong. Biomass burning and other regional sources likely dominated ambient PAHs in Hong Kong.     

Decreasing Lead Levels in Cultivated Soils in Finland

Abstract

Soluble and total lead were determined in soils sampled in 1974 and 1987 using acid ammonium acetate-EDTA and aqua regia for extraction, respectively. The concentration of total lead decreased during the 13 Years period from 7.9 to 7.6 mg/l soil corresponding to total amount of 15.8 and 15.2 kg/ha in the plough layer. The concentration of soluble lead decreased more than total lead and amounted to 8% compared to 4% in case of total lead. This favourable development is caused by introduction of unleaded petrol and hence decreased lead emissions from traffic. Speciation studies would be a useful tool to elucidate the pathways of lead deposited on soil.     

A 110 Year Sediment Record of Polycyclic Aromatic Hydrocarbons Related to Economic Development and Energy Consumption in Dongping Lake,North China

A sedimentary record of the 16 polycyclic aromatic hydrocarbon (PAH) pollutants from Dongping Lake, north China, is presented in this study. The influence of regional energy structure changes for 2–6-ring PAHs was investigated, in order to assess their sources and the impact of socioeconomic developments on the observed changes in concentration over time. The concentration of the ΣPAH₁₆ ranged from 77.6 to 628.0 ng/g. Prior to the 1970s, the relatively low concentration of ΣPAH₁₆ and the average presence of 44.4% 2,3-ring PAHs indicated that pyrogenic combustion from grass, wood, and coal was the main source of PAHs. The rapid increase in the concentration of 2,3-ring PAHs between the 1970s and 2006 was attributed to the growth of the urban population and the coal consumption, following the implementation of the Reform and Open Policy in 1978. The source apportionment, which was assessed using a positive matrix factorization model, revealed that coal combustion was the most important regional source of PAHs pollution (>51.0%). The PAHs were mainly transported to the site from the surrounding regions by atmospheric deposition rather than direct discharge.     

Improved efficiency of extraction of polycyclic aromatic hydrocarbons (PAHs) from the National Institute of Standards and Technology (NIST) Standard Reference Material Diesel Particulate Matter (SRM 2975) using accelerated solvent extraction

The efficiency of extraction of polycyclic aromatic hydrocarbons (PAHs) with molecular masses of 252, 276, 278, 300, and 302 Da from standard reference material diesel particulate matter (SRM 2975) has been investigated using accelerated solvent extraction (ASE) with dichloromethane, toluene, methanol, and mixtures of toluene and methanol. Extraction of SRM 2975 using toluene/methanol (9:1, v/v) at maximum instrumental settings (200 °C, 20.7 MPa, and five extraction cycles) with 30-min extraction times resulted in the following elevations of the measured concentration when compared with the certified and reference concentrations reported by the National Institute of Standards and Technology (NIST): benzo[b]fluoranthene, 46%; benzo[k]fluoranthene, 137%; benzo[e]pyrene, 103%; benzo[a]pyrene, 1,570%; perylene, 37%; indeno[1,2,3-cd]pyrene, 41%; benzo[ghi]perylene, 163%; and coronene, 361%. The concentrations of the following PAHs were comparable to the reference values assigned by NIST: indeno[1,2,3-cd]fluoranthene, dibenz[a,h]anthracene, and picene. The measured concentration of dibenzo[a,e]-pyrene was lower than the information value reported by the NIST. The measured concentrations of other highly carcinogenic PAHs (dibenzo[a,l]pyrene, dibenzo[a,i]pyrene, and dibenzo[a,h]pyrene) in SRM 2975 are also reported. Comparison of measurements using the optimized ASE method and using similar conditions to those applied by the NIST for the assignment of PAH concentrations in SRM 2975 indicated that the higher values obtained in the present study were associated with more complete extraction of PAHs from the diesel particulate material. Re-extraction of the particulate samples demonstrated that the deuterated internal standards were more readily recovered than the native PAHs, which may explain the lower values reported by the NIST. The analytical results obtained in the study demonstrated that the efficient extraction of PAHs from SRM 2975 is a critical requirement for the accurate determination of PAHs with high molecular masses in this standard reference material and that the optimization of extraction conditions is essential to avoid underestimation of the PAH concentrations. The requirement is especially relevant to the human carcinogen benzo[a]pyrene, which is commonly used as an indicator of the carcinogenic risk presented by PAH mixtures.     

PAH and PCB determination of the concentration gradient in moss Pleurozium schreberi near a highway,and seasonal variability at the background reference site

Moss (Pleurozium schreberi) was investigated as biomonitor of atmospheric polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs). Samples were collected at a distance of 10, 50 and 100 m from a highway and were seasonally collected in a forest stand near a regional background air pollution station situated approximately 30 km from the highway. The samples from the background area were dried using two different techniques in parallel, air-drying and freeze-drying. Simultaneous pressurised liquid extraction of PAHs and PCBs was performed, followed by purification using gel permeation chromatography of the crude extract. The concentration of the 15 most important Environmental Protection Agency (EPA) PAHs was determined by gas chromatography coupled with ion-trap mass spectrometry with a selected ion storage acquisition programme, and the PCB concentrations were determined using a mass spectrometer operated in tandem mass spectrometry (MS/MS) mode. Acceptable recoveries and quality parameters for PAHs and PCBs were achieved with the use of pressurised liquid extraction followed by gel permeation chromatography. The detection limit was <0.76 ng g^?1 for PAHs and <0.04 ng g^?1 for PCBs. Possible contamination of the moss samples by 3-ring PAHs and PCBs in the atmosphere was found during air drying. Increased PAH and PCB concentrations caused by car engine exhausts and by asphalt and oil evaporation were found near the highway. Generally, the PAH and PCB concentrations in moss decreased exponentially with distance from the highway. The organic compound concentrations close to the background station showed seasonal fluctuations corresponding to the fluctuations in the local air temperature and particle concentration.     

Determination of polycyclic aromatic hydrocarbons by gas chromatography — ion trap tandem mass spectrometry and source identifications by methods of diagnostic ratio in the ambient air of Campo Grande, Brazil

Polycyclic aromatic hydrocarbons (PAHs) were measured in samples collected from July to December of 2003, in Campo Grande — MS (Brazil), on three different sites: Ary Coelho Square (AC), Indigenous Nations' Park (NI) and Indubrasil (IB). Particle-bound PAHs were collected on quartz filters and gas-phase PAHs on glass cartridges using a polyurethane foam sampler, respectively. The substances of interest were extracted with a dichloromethane/methanol mixture (9:1 v/v) and subjected to gas chromatography — ion trap tandem mass spectrometry (GC-MS/MS). The concentration values of PAHs in AC varied from 0.03 to 26.28 μg m^− 3 and the average value for the sum of 16 PAHs was 51.35 μg m^− 3 (range: 2.98-79.91 μg m^− 3). On the NI site were obtained values of PAHs with concentrations of between 0.02 and 13.84 μg m^− 3 and an average value for the total of 16 PAHs was equal to 46.76 μg m^− 3 (range: 21.20-85.32 μg m^− 3). The PAH concentrations obtained in the IB sampling site varied from 0.02 to 16.74 μg m^− 3, with the obtained medium value, for the total of 16 PAHs, equal to 42.79 μg m^− 3 (range: 26.53-58.49 μg m^− 3). Strong positive correlations were found among samples (r: 0.70 to 0.97, p < 0.005) in 39% of the associations and non-significant correlations were observed among PAHs, except for Flu-Acy, BaA-Phe, Chry-BaA, BkF-Naph, BaP-Phe and BghiP-Naph that were poorly correlated. The statistical analysis of the data showed high similarity among samples on the three sites. The diagnostic ratios indicated the vehicular traffic (diesel and gasoline engines) and the biomass combustion, as major PAH sources in the three sampling sites.     

Spatial distribution and sources of polycyclic aromatic hydrocarbons (PAHs) in green mussels (Perna viridis) from coastal areas of Peninsular Malaysia: implications for source identification of perylene

Distribution of polycyclic aromatic hydrocarbons (PAHs) was determined in green mussels (Perna viridis) from various sites in coastal waters of Peninsular Malaysia between August 2004 and January 2007, in order to assess contamination by petroleum hydrocarbons. The range of ∑PAHs detected in mussels was from 766 to 110500 (ng/g lipid wt.). High concentrations of PAHs were found in mussel tissues collected near Penang Bridge. The ratios of methyl phenanthrenes to phenanthrene (∑MP/P ratio) for Penang, Kg. Pasir Puteh and Tebing Runtuh (Johore Straits) were greater than 2, indicating extensive input of petrogenic PAHs. The results indicated that male individuals elevated more considerable concentrations of PAHs in their soft tissues in comparison to female individuals. The results of independent sample T-test showed that there were no significant differences (p > 0.05) between male and female mussels analysed in the Pasir Panjang station. Negative significant correlations (r = ?0.890, p < 0.01) and (r = ?0.0655, p < 0.05), were found between weight and total of PAHs in female and male species, respectively. This indicated that body weight of each individual was not affected by the PAHs concentrations. The present study proposes the use of soft tissue of Perna viridis as a biomonitor of perylene bioavailability and contamination in coastal waters of Peninsular Malaysia.     

Soil Contamination by some Organic Micropollutants Related to Sewage Sludge Spreading

Abstract

The aim of the present publication is to give some information on soil contamination by 4 different micropollutant classes due to sewage sludge spreading.

The soil under reserch shown an accumulation of light molecular weight PAHs and PCBs, DEHP and 4-NP just after spreading, but one month later the con-centration of these micropollutant groups fall to the concentration detected just before the sludge spreding.

As far as the soil concentration is concerned, only PAHs and PCBs are precipitation dependent.

Some test plots, enriched during 10 years with fertilisers, pig-dung or sewage sludges show only an increse of the PAH concentrations of the plots amended with sludges. In the same way, the sewage sludge is chiefly responsible for the increase of PCBs in the soils, but pig-dung seems to contain quantities of these micropollutants which have to be taken into consideration.     

Polycyclic Aromatic Hydrocarbons in Creosote Impregnated Waste Materials From Across Western Canada

Abstract

Creosote Impregnated Waste Materials (CIWMs) such as out-of-service railroad lies, telephone poles and marine pilings were assessed for toxicity in 1991 as part of the Priority Substances List under the Canadian Environmental Protection Act (CEPA). During the assessment, insufficient data was found on the polycyclic aromatic hydrocarbon (PAH) components in CIWMs, making the evaluation of potential environmental and health risks impossible. Analyses for PAHs listed on the USEPA Priority Pollutants List were carried out on out-of-service railroad ties taken from four locations across Western Canada. Each sample was extracted, partitioned, fractionated and analyzed by gas chromatography-mass spectrometry. Relatively high values of PAHs were found in approximately half of the samples. The concentration of each PAH varied from non-detected to several thousand ppm, however, the relative amounts of the various PAHs were similar in the positive samples.