Copper (II) as an Amperometric Indicator: Determination of Thorium

Abstract

It has been demonstrated that copper (II) is an attractive amperometric indicator for the titration of small amounts of thorium in solution. EDTA was used as the titrant. Best results are obtained in the titration when the mole ratio of thorium to copper is high. The method should be applicable to several other metal ions that form more stable EDTA complexes than does copper.     

Rapid Amperometric Determination of Magnesium(II) Ions

Abstract

An amperometric procedure for the measurement of magnesium(II) has been developed using the enzyme hexokinase in solution and glucose oxidase immobilized onto a preactivated polymeric support. The reaction of hexokinase was monitored following the decrease in current due to the glucose consumption by the enzyme in the presence of the ATP-Mg²⁺ complex. The reaction rate was dependent on the concentration of magnesium(II) in solution. Concentrations of hexokinase and ATP were optimised. Measuring the current change in the 1-3 min interval after the start of the reaction magnesium(II) can be determined in the 4 × 10^?5 to 10^?3 M range. Other divalent cations tested showed no interference. The magnesium(II) content of 5 pharmaceutical products was measured with the amperometric and compared to a spectrophotometric procedure. The results correlated well.     

Selective preconcentration of trace thorium from aqueous solutions with Th(IV)-imprinted polymers prepared by a surface-grafted technique

A novel ion-imprinted adsorbent for selective solid phase extraction of thorium(IV) based on the surface of silica gel was prepared by a surface-grafted technique with methacrylic acid (MAA) as a functional monomer. After removal of Th(IV) ions with 3?mol?L^?1 HCl solution, the obtained imprinted particles for Th(IV) exhibited specific recognition and relatively rapid kinetic process. The maximum static and total dynamic adsorption capacity of the ion-imprinted polymers (IIPs) for Th(IV) was 33.2 and 17.3?mg?g^?1, respectively. A comparison of the selectivity coefficient of the imprinted polymers with that of non-imprinted polymers showed that the imprinted matrix for Th(IV)/U(VI), Th(IV)/Ce(III), Th(IV)/La(III) and Th(IV)/Zr(IV) was 58.8, 107, 106.4 and 151.7 times greater than non-imprinted matrix, respectively. With a series of samples loading flow rate of 3?mL?min^?1 for preconcentration, an enrichment factor of 14.6 and the detection limit of 0.59?µg?L^?1 were obtained. The relative standard deviation of the method under optimum conditions was 2.1% (n?=?7). The developed method was successfully applied to the determination of trace Th(IV) in real water samples with satisfactory results.     

Potentiometric and UV-Visible Spectrophotometric Studies of the Stability of Thorium(IV) Complexes with (o-Hydroxyphenyl) Mono- and Di-Methylenephosphonic Acids

Protometric studies were performed in aqueous solutions at 25^C and 0.1 ,mol.dm⁻³ ionic strength (NaClO₄) to determine the complexing abilities of eight (o-hydroxy-phenyl) mono- and di-methylenephosphonic acids (differently substituted by chromophoric or auxochromic groups) towards thorium(IV). The number, the nature of the species present in solution, their overall stability constants over a broad acidity range and their individual electronic spectra, as resolved by computation, have been determined by potentiometry and UV-visible spectrophotometry.The formation of 1:1 species, partially protonated MLH_x and totally deprotonated [ML], as well as hydroxo species -- mononuclear ML(OH)_x and dinuclear M₂L(OH) _x is reported with thorium(IV). The results show that the complexing power, which is not very different in the lanthanide series, is much higher for thorium(IV). The ratio Th⁴⁺/Eu³⁺ reaches eight log₁₀ units with some of the ligands.     

Pectin based cerium (IV) and thorium (IV) phosphates as novel hybrid fibrous ion exchangers synthesis,characterization and thermal behaviour

Summary Pectin based cerium (IV) and thorium (IV) phosphates have been synthesized as new phases of hybrid fibrous ion exchangers. Both materials were characterized using X-ray diffraction, infrared (IR) spectra, thermogravimetric analysis (TG), differntial thermogravimetry (DTG), differntial thermal analysis (DTA) and scanning electron microscopy (SEM), as well as the determination of their ion exchange capacity, elution and pH titration. The X-ray study reveals the amorphous nature of the materials, while SEM studies confirm the fibrous nature of the materials. The thermal studies of these materials indicate that both of them are highly stable on heating as they retain about 97% of their ion-exchange capacity (i.e.c.) on heating up to 100°C and about 81% on heating up to 200°C.     

Highly effective peroxidic epoxidation of olefins using hexathiocyanatorhenate(IV) as catalyst and bicarbonate as co-catalyst

In the presence of bicarbonate as co-catalyst hexathiocyanatorhenate(IV) functions as an extremely effective catalyst in the epoxidation of olefins using aqueous hydrogen peroxide as the terminal oxidant.     

Application of artificial neural networks as a technique for interference removal: kinetic-spectrophotometric determination of trace amounts of Se(IV) in the presence of Te(IV)

Artificial neural networks (ANNs) are among the most popular techniques for nonlinear multivariate calibration in complicated mixtures using spectrophotometric data. In this study we propose a computer-based method for removing Te(IV) interference in the determination of Se(IV) using artificial neural networks. In this way, an artificial neural network consisting of three layers of nodes was trained by applying a back-propagation learning rule. The resulting RMSE of prediction for selenium was obtained as 0.108.     

Synthesis and characterization of uranium (IV) phosphate-hydrogenphosphate hydrate and cerium (IV) phosphate-hydrogenphosphate hydrate

A new uranium (IV) phosphate of proposed formula U₂(PO₄)₂HPO₄·H₂O, i.e. uranium phosphate-hydrogenphosphate hydrate (UPHPH), was synthesized in autoclave and/or in polytetrafluoroethylene closed containers at 150 °C by three ways: from uranium (IV) hydrochloric solution and phosphoric acid, from uranium dioxide and phosphoric acid and by transformation of the uranium hydrogenphosphate hydrate U(HPO₄)₂·nH₂O. The new product appears similar to the previously published thorium phosphate-hydrogenphosphate hydrate Th₂(PO₄)₂HPO₄·H₂O (TPHPH). From preliminary studies, it was found that UPHPH crystallizes in monoclinic system (, , , β=91.67(3)° and ). Heated under inert atmosphere, this compound is decomposed above 400 °C into uranium phosphate-triphosphate U₂(PO₄)P₃O₁₀, uranium diphosphate α-UP₂O₇ and diuranium oxide phosphate U₂O(PO₄)₂.Crystallized cerium (IV) phosphate-hydrogenphosphate hydrate Ce₂(PO₄)₂HPO₄·H₂O (CePHPH) was also synthesized from (NH₄)₂Ce(NO₃)₆ and phosphoric acid solutions by the same method (monoclinic system: , , , β=91.98(1)° and ). When heating above 600 °C, cerium (IV) is reduced into Ce (III) and forms a mixture of CePO₄ (monazite structure) and CeP₃O₉.     

Esterification‐nitration of Ortho‐hydroxyphenyl Carboxylic Acids and Benzoic Acids with Cerium(IV) Ammonium Nitrate (CAN)

A convenient and useful esterification was realized, and this reaction proceeded without a dehydrating reagent or water removal equipment. A series of ortho‐hydroxyphenyl carboxylic acids and benzoic acids were transformed to their corresponding methyl esters under CAN/CH₃OH reaction conditions. Whereas in an aprotic solvent, acetonitrile, sp³‐C tethered ortho‐hydroxyphenyl carboxylic acids undergo simultaneous o,p‐dinitration and intramolecular esterification reactions in good yields. Also, 2‐((1 E)‐2‐nitrovinyl)‐4‐nitro‐phenol ( 3e ) showed selective cytotoxicities toward MCF‐7, HEP G2, and HEP 3B cell lines with IC₅₀ values of 23.50, 7.33, and 7.59 ug/mL, respectively.     

Gravimetric Determination of Mercury(II) and Vanadium(IV) with Benzoylacetanilide

Abstract

Gravimetric methods for the determinations of mercury(II) and vanadium(IV) with benzoylacetanilide have been described. These metals have been separated from commonly associated ions and a procedure for the determination of vanadium content of steel has been developed. By these methods, 14 to 50 mg. of mercury and 5 to 20 mg. of vanadium have been estimated with relative standard deviations of 0.18% and 0.10%, respectively.     

Uranium(VI) and Thorium(IV) Adsorption Studies on Chelating Resin Containing Pentaethylenehexamine as a Functional Group

A new chelating resin (glycidyl methacrylate/divinylbenzene/pentaethylenehexamine (GMA/DVB/PEHA)) for uranium(VI) and thorium(IV) has been developed by functionalizing GMA/DVB with PEHA. The adsorption of U(VI) and Th(IV) ions onto the functionalized GMA/DVB/PEHA were investigated as a function of pH value, contact time, and temperature using batch adsorption technique. The results showed that U(VI) and Th(IV) adsorption onto GMA/DVB/PEHA was strongly dependent on pH. Kinetic studies revealed that the adsorption process achieved equilibrium within 15 and 90 minutes for Th(IV) and U(VI), respectively, and followed a pseudo-second-order rate equation. The isothermal data correlated with the Langmuir model better than the Freundlich model. Thermodynamic data indicated the spontaneous and endothermic nature of the process. The maximum adsorption capacity of U(VI) and Th(IV) were found to be 114 and 78 mg/g, respectively. Quantitative recovery of uranium and thorium were achieved by desorbing the loaded GMA/DVB/PEHA with 0.5 M HNO₃      

Darstellung und spektroskopische Charakterisierung von bindungsisomeren Halogenoselenocyanato-Osmaten(IV) und -Rhenaten(IV)

Preparation and Spectroscopic Characterization of Bond Isomeric Halogenoselenocyanato-Osmates(IV) and -Rhenates(IV) By oxidative ligand exchange of appropriate chloro-iodo complexes of Os^IV or Re^IV with (SeCN)₂ in CH₂Cl₂ or by heterogeneous reaction with Pb(SeCN)₂ or AgSeCN in CH₂Cl₂ the new complexes cis-[OsCl₄(NCSe)(SeCN)]^2?, tr.-[OsCl₄Br(NCSe)]^2?, tr.-[OsCl₄Br(SeCN)]^2?, [ReCl₅(NCSe)]^2?, [ReCl₅(SeCN)]^2?, tr.-[ReCl₄I(NCSe)]^2?, tr.?[ReCl₄(NCSe)(SeCN)]^2? and tr.?[ReCl₄(NCSe)₂]^2? are formed and isolated as pure compounds by ion exchange chromatography on DEAE-cellulose. The bond isomers are significantly distinguished by the frequencies of innerligand vibrations: n?_CN(Se) > n?_CN(N); n?_CSe(N) > n?_CSe(Se); δ_NCSe > δ_SeCN. The electronic spectra (10 K) of the solid salts reveal a bathochromic shift for the charge transfer bands of the Se isomers as compared with the corresponding N isomers. The intra-configurational transitions are observed for the Os^IV complexes at 600 to 2400 and for the Re^IV complexes at 500 to 1600 nm. The ⁷⁷Se nmr signals of the Os^IV bond isomers are registrated for Se binding in the region 970 to 1040 ppm, for N coordination downfield at 1540 to 1640 ppm.     

分光光度法测定硒盐中的硒(IV)含量

室温下硒(Ⅳ)与邻苯二胺配位生成黄色配合物,用环己烷萃取后,在最大吸收波长330nm处测定其吸光度。实验结果表明,硒含量在4～20μg/mL时线性关系良好,线性方程A=0.1999c-0.0011(R=0.9995)。最优化条件下测定硒盐中硒的含量取得满意结果。方法操作简单,设备和药品价格低廉,准确度高,稳定性好,适宜于基层实验室对食品中微量元素硒的检验。     

Dioxobridged complexes of molybdenum (IV) and tungsten (IV) with N-alkylphenothiazines and their interactions with L-cysteine and L-histidine

Six new dioxobridged complexes of molybdenum (IV) and tungsten (IV) with N-alkylphenothiazines having the general formula M₂O₄(L)₂(H₂O)₂ [where M = molybdenum or tungsten and L = N-alkylphenothiazines] have been synthesised. The complexes have been characterised on the basis of analytical, molar conductance, magnetic susceptibility, spectral data, TGA and DTA. The low magnetic moments for the complexes are due to spin-spin interaction or metal-metal bonding. The interactions of these complexes with some biologically important amino acids have been studied.     

Synthesis and characterization of uranium (IV) complexes with various amino acids

Complexes of uranium in its IV oxidation state, using cysteine, glycine, serine and aspartic acid as ligands, have been synthesized. Semi-microanalysis of the complexes indicate 1:1 metal to ligand ratio for all the synthesized complexes. Infrared spectra of solid complexes have been employed to establish the groups, coordinated to the metal ion. Effective magnetic moment of the complexes were also estimated.     

Diorganotin(IV) and triorganotin(IV) derivatives of diphenic acid

The diorganotin(IV) and triorganotin(IV) derivatives R₂SnA (R = Me, n-Pr, n-Bu, n-Oct) and (R₃Sn)₂A [R = Me, Ph, cyclohexyl (Cyh); A = an anion of diphenic acid] have been prepared and characterized by elemental analysis, IR, ¹H and ¹³C NMR spectroscopies. Tetrahedral tin forms a part of a diphenate cyclic ring in the diorganotin complexes with unidentate carboxylates, which have further been used for the synthesis of cyclic acid anhydrides. The soluble dinuclear triorganotin complexes (Me, Ph) possess symmetrically bonded carboxylates while the less soluble compound (Cyh₃Sn)₂A has two asymmetrically bonded carboxylates. All have a trigonal bipyramidal structure with R₃Sn units remote from each other.     

Dimethylsilicon(IV) Derivatives of Amino Acids

Reactions of dichlorodimethylsilane with the sodium salt of amino acids in 1:2 molar ratio led to the formation of a new series of dimethylsilicon(IV) complexes of general formula, Me 2 SiL 2 [L = anion of amino acids, viz. glycine (HGly), L-methionine (L-MethH), DL- f -alanine (DL- f -AlaH) L-leucine (L-LeuH), L-valine (L-ValH) and D-phenylalanine (D-PheH)]. The complexes have been characterized by elemental analyses, molar conductance, and electronic spectra, and the bonding in these complexes is discussed in terms of their infrared, 1 H and 13 C NMR spectra. A distorted octahedral structure with trans methyl groups has been tentatively suggested for the complexes. The complexes, found soluble in DMSO, have been tested in vitro against various bacteria, viz. Escherichia coli , Pseudomonas putida-2252 , Aeromonas formicans , Staphylococcus aureus-740 , and fungi, viz. Aspergillus niger ORS-4, Aureobasidium pullulans-1991 , Verticillium dahliae-2063 , and Penicillium notatum-1348 .     

Spectrophotometric Studies of Cerium(III) and Thorium(IV) Chelates of Diethylenetriaminepentaacetic Acid (DTPA)

The interaction between diethylenetriaminepentaacetic acid (DTPA or H_sZ) and Ce(III) and Th(IV) ions has been investigated spectrophotometrically in aqueous solution at an ionic strength of 0.1 and for various temperatures. It has been found that the Ce(III)-DTPA chelate (1:1) exhibited a characteristic absorption maximum at 297 nm, and the optimum pH range is between 3.4 to 4.4. The absorption of Ce(III)-DTPA chelate is considerably diminished by adding small amounts of Th(IV) ions. This phenomenon was used to evaluate the formation constant of Th(IV)-DTPA chelate (1:1). The formation constants and the thermodynamic properties characterizing the formation of the chelates have been calculated at 25°. The results are as follows:      

Molecular Mechanics Calculations on Chelates of Titanium(IV), Vanadium(IV/V), Copper(II), Nickel(II), Molybdenum(IV/V), Rhenium(IV/V) and Tin(IV) with Di- and Tridentate Ligands Using the New Extensible Systematic Force Field (ESFF)—An Empirical Study

Force field calculations were performed on a series of 27 transition metal complexes of titanium(IV), vanadium(IV/V), copper(II), nickel(II), molybdenum(IV/V), rhenium(IV/V), and tin(IV) with a broad variety of di- or tridentate ligands in order to find a reliable scheme for determining the molecular structure of such chelates with the new Extensible Systematic Force Field (ESFF). A good agreement between theoretical results and experimental data was achieved. In some cases an unspecific fitting of the force field was necessary.     

可溶性锰(IV)化学发光反应的研究

发现了在甲醛存在的条件下, 可溶性锰(IV)与30余种有机物和无机物的化学发光反应. 以头孢菌素类药物(头孢曲松钠、头孢唑啉钠、头孢拉定和头孢哌酮钠)为分析对象优化了可溶性锰(IV)-甲醛-头孢菌素类药物化学发光反应的条件, 建立了测定四种头孢菌素类药物的流动注射化学发光新方法, 并将建立的方法用于药物制剂中头孢菌素类药物的含量测定．同时, 对化学发光反应的机理进行了初步探讨.