Kinetics of the oxidation of cyclohexene by thallium(III) acetate

The kinetics of the reaction by which thallium(III) acetate oxidizes cyclohexene in glacial acetic acid medium, has been studied by UV spectrophotometric observation at 30°C. The consumption of thallium(III) acetate follows a second-order rate law exhibiting first-order dependence on each of thallium(III) acetate and cyclohexene; however, the first-order dependence on cyclohexene disappears at high cyclohexene concentrations as pseudo-first-order conditions prevail above 0.2 M cyclohexene. A steady-state model of the following form is proposed: where Tl, Cy, and Com are units of Thallium(III) acetate, cyclohexene, and a reaction complex. The value of k₂ has been evaluated as 0.00027 and (k_?1 + k₂) as 0.0385k₁. For low thallium(III) acetate concentrations the reaction kinetics follow the rate law: where α = the excess concentration of cyclohexene over thallium(III) triacetate. For thallium(III) acetate concentrations above 0.02 M, double salt formation of thallium(III) acetate with product thallium(I) acetate removes thallium(III) acetate from the reaction and a modified rate law is observed. Runge–Kutta numerical solutions to the differential equations provide confirmation that the rate expressions are valid in predicting the observed concentrations of thallium(III) acetate.     

Some studies on thallium oxalates. VI

The effect of the thallium(I) concentration on the potentiometric titration of thallium(III) with oxalic acid in 0.1M HNO₃ or 0.05M H₂SO₄ is studied, and conditions are established for the preparation of the thallium(I) bis-oxalato diaquo thallate(III) complex. Chemical analysis of the salt corresponds to the formula T1^I(T1^III(C₂O₄)₂) · 5 H₂O. Thermal decomposition studies on the complex using TG, DTG and DTA techniques indicate the formation of thallium(I) oxalate (stable from 130° to 320°) as the intermediate, the final product being a mixture of thallium(I) oxide and thallium(III) oxide (stable from 520° to 600°). Infrared absorption spectra, X-ray diffraction patterns and microscopic observations are used to characterise the complex and the intermediate.     

Selective solid-phase extraction of trace thallium with nano-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> from environmental samples

A novel sorbent, nano-Al₂O₃ was employed for the separation and preconcentration of thallium from aqueous solution in batch equilibrium experiments. It was found that the adsorption percentage of thallium ions was close to 100% at pH 4.5, and the desorption by 1.0 mL of 0.25 M HCl reached 99%. The adsorption equilibrium was well described by the Langmuir isotherm model with maximum adsorption capacity of 5.78 mg/g (20 ± 0.1°C). The enrichment factor values of Tl(III) was 25 for 25 mL sample. Detection limit of thallium (3σ, n = 11) equal to 0.8 μg/mL and relative standard deviation (2.4%) were obtained. The method has been successfully applied to the determination of trace thallium in some environmental samples and the certified reference material polymetallic nodule (GBW07296) with satisfactory results.     

Extraction separation of thallium (III) from thallium (I) with n-octylaniline

A novel method is developed for the extraction separation of thallium(III) from salicylate medium with n-octylaniline dissolved in toluene as an extractant. The optimum conditions have been determined by making a critical study of weak acid concentration, extractant concentration, period of equilibration and effect of solvent on the equilibria. The thallium (III) from the pregnant organic phase is stripped with acetate buffer solution (pH 4.7) and determined complexometrically with EDTA. The method affords the sequential separation of thallium(III) from thallium(I) and also commonly associated metal ions such as Al(III), Ga(III), In(III), Fe(III), Bi(III), Sb(III) and Pb(II). It is used for analysis of synthetic mixtures of associated metal ions and alloys. The method is highly selective, simple and reproducible. The reaction takes place at room temperature and requires 15-20 min for extraction and determination of thallium(III).     

Studies with dithizone : Part 26. The interaction of thallium(III) with solutions of dithizone in organic solvents

The strong oxidising capacity of thallium(III) dominates its reaction with solutions of dithizone (H₂Dz) in organic solvents. When carbon tetrachloride is used as solvent, the unstable thallium(III) complex Tl(HDz)³ is found in the organic phase but it very quickly disproportionates to the thallium(I) complex [Tl(HDz)], and bis-1,5-diphenylformazan-3-yl-disulphide. This reaction is notably faster in chloroform, in which thallium(I) dithizonate is the first identifiable product. In contact with an acidic aqueous phase, thallium(I) dithizonate is reverted to regenerate dithizone in the organic phase and Tl⁺ ions appear in the aqueous phase. Organic solutions of the disulphide disproportionate spontaneously by first-order kinetics to give an equimolar mixture of dithizone and the mesoionic compound, 2,3-diphenyl-2,3-dihydrotetrazolium-5-thiolate: this change is much slower in carbon tetrachloride than in the more polar chloroform and is catalysed by both Tl⁺ and Tl³⁺. If thallium(III) is present in excess, the mesoionic compound is the principal oxidation product of the dithizone although a dication may also be formed. The mesoionic compound does not react with thallium(I) but forms a water-soluble 2:1 complex with thallium(III); partition of this complex into the organic phase is uninfluenced by chloride ions. Because of the large number of competing reactions, the composition of the reaction mixture at any stage of the reaction between thallium(III) and dithizone depends on the relative concentrations of the components, the order in which they are brought together, the time elapsed after mixing, the pH of the aqueous phase, and the nature of the organic solvent.     

Extraction and separation of gallium, indium and thallium with several carboxylic acids from chloride media

A method is proposed for the extraction and individual separation of trivalent gallium, indium and thallium with sec-octylphenoxy acetic acid (CA-12), sec-nonylphenoxy acetic acid (CA-100) and naphthenic acid (NA) from chloride media. The distribution equilibria of gallium (III), indium (III), thallium (III) and thallium (I) between carboxylic acids (CA-12, CA-100 and NA) dissolved in kerosene and acidic aqueous chloride media has been investigated as a function of the concentration of extractants and the concentration of hydrogen ion in aqueous phase. A possible mechanism of the extraction is discussed. The method permits rapid and precise individual separation of gallium (III), indium (III) and thallium (III), and is applicable to the analysis of alloy samples.     

甲基百里酚蓝-钐(III)配合物与鲱鱼精DNA的相互作用

在pH＝7.25的Tris-HCl缓冲溶液中, 以中性红(NR)作为光谱探针, 采用UV光谱、FS光谱、粘度等方法研究了甲基百里酚蓝(MTB)与稀土金属离子钐[Sm(III)]形成的配合物Sm(III)(MTB)₂与鲱鱼精DNA的作用机制. 确定了Sm(III)(MTB)₂与鲱鱼精DNA之间有嵌插作用方式存在, 说明Sm(III)(MTB)₂金属配合物能使鲱鱼精DNA的功能产生一定影响.     

Anodic stripping voltammetric determination of thallium as [TlBr4]-rhodamine B complex

The anodic stripping voltammetric behaviour of the [TlBr₄]-rhodamine B complex is described and compared with that of thallium(I) and thallium(III) ions. The electrolyte composition, the best potential for the deposition of thallium from the complex in the selected electrolyte, the duration of the electrolysis, and the possibility of reduction of thallium in the [TlBr₄]-rhodamine B complex before the electrolysis with ascorbic acid were investigated. The results showed good reproducibility of the measurements of thallium as [TlBr₄]-rhodamine B complex and are similar to those obtained for thallium as Tl(I) and Tl(III) ions. As the [TlBr₄]-rhodamine B complex is strongly adsorbed on polyethylene, a previous preconcentration step on a column, packed with polyethylene powder, allowed the voltammetric determination of thallium as [TlBr₄]-rhodamine B complex in samples of KCl and NaCl as solid salts after the separation of the matrix. With this procedure it was possible to reach enrichment factors of 25 with recoveries from 96.7 to 107.9% for thallium concentrations from 5 to 40 μg L^–1 and RSD between 4.2 and 9.2%. The procedure was used to determine thallium traces in KCl and in sea salt. The results of these determinations were compared with the results obtained by graphite furnace atomic absorption spectrometry.     

Radiation induced exchange reaction between thallium(I) and thallium(III)—Comparison of sulfuric acid and perchiloric acid solution

The rate constant of radiation induced exchange reaction between thallium(I) and thallium(III) ions has been studied for elucidating the mechanisms which are responsible for (T1(II) intermediates or bridging groups (SO ₄ ^2– ) in sulfuric acid and perchloric acid solutions. It was found that the radiation induced exchange reaction is accelerated by the sulfate ion, and the rate of the thallium(II)-thallium(I) reaction is faster than that of the thallium(II)-thallium(III) process in perchloric acid solution.     

Spectrophotometric Investigation of Iron(III)-N-Phenylcin-namohydroxamic Acid System

Abstract

N-Phenylcinnamohydroxamic acid, PCHA, was found to react with iron (III) to form complex species of different colour depending upon the reaction environment. The reaction conditions for the formation of the complex species were studied in aqueous-ethanolic medium. The general spectral properties of the species were investigated. The absorption curves were found to have two isobestic points. The number and composition of the complexes were determined and found to have composition 1:1, 1:2, 1:3 (Fe: PCHA). The wavelengths of the maximum absorbances were figured out to be 535, 495, and 445 nm for the I, II, and III complex species, respectively. It was verified that the Beer's law holds for these complexes at all wavelengths, and for the mixtures at the wavelengths of the isobestic points in a wide range of pH. The stepwise stability constants have been determined by the method of isobestic point and found to be log K₁ = 11.55, log K₂ = 10.11, and log Kg₃ = 7.44 for the I, II, and III complex species, respectively. The distribution diagrams (nomograms) of the complex species as a function of pH were constructed and the molar extinction coefficients of the three consecutive complexes have also been determined.     

Anodic stripping voltammetric determination of thallium as [TlBr4]-rhodamine B complex

The anodic stripping voltammetric behaviour of the [TlBr₄]-rhodamine B complex is described and compared with that of thallium(I) and thallium(III) ions. The electrolyte composition, the best potential for the deposition of thallium from the complex in the selected electrolyte, the duration of the electrolysis, and the possibility of reduction of thallium in the [TlBr₄]-rhodamine B complex before the electrolysis with ascorbic acid were investigated. The results showed good reproducibility of the measurements of thallium as [TlBr₄]-rhodamine B complex and are similar to those obtained for thallium as Tl(I) and Tl(III) ions. As the [TlBr₄]-rhodamine B complex is strongly adsorbed on polyethylene, a previous preconcentration step on a column, packed with polyethylene powder, allowed the voltammetric determination of thallium as [TlBr₄]-rhodamine B complex in samples of KCl and NaCl as solid salts after the separation of the matrix. With this procedure it was possible to reach enrichment factors of 25 with recoveries from 96.7 to 107.9% for thallium concentrations from 5 to 40 μg L^–1 and RSD between 4.2 and 9.2%. The procedure was used to determine thallium traces in KCl and in sea salt. The results of these determinations were compared with the results obtained by graphite furnace atomic absorption spectrometry. Received: 5 February 1998 / Revised: 19 May 1998 / Accepted: 29 May 1998     

The determination of thallium(III) with the 2,2'-bipyridyl-iron(II) chelate

A spectrophotometric determination of thallium (III), based on solvent extraction of an ion-association pair formed between the cationic 2,2'-bipyridyl-iron(II) chelate and the anionic thallium(III) bromide complex is described. The best extractant is 1,2-dichloroethane and extraction is possible over the pH range 2.5–6.7. The composition of the extracted species was confirmed, and conditions were established for the extraction over the concentration range 7.9·10^-6–3.5·10^-5M of thallium in aqueous solution.     

Catalytic Determination of Perchlorate Using a Modified Carbon Paste Electrode

Abstract

A method for the catalytic voltammetric determination of perchlorate using a carbon paste electrode modified with a liquid anion exchanger is presented. The fundamental catalytic effect is based on the chemical reoxidation of electrochemically generated Tl(O) by perchlorate which can be monitored by an increase of the corresponding current flow. Perchlorate can be preconcentrated, together with tetrachlorothallate(III) as a catalyst, from hydrochloric acid solutions onto the modified carbon paste electrode under open circuit conditions. For analytical purposes, the increase of the current response for the reoxidation of Tl(O) to Tl(I) is exploited for quantifications. Methodical parameters such as pH, ionic strength of the media, preconcentration time and thallium concentration are investigated; the influence of interferents is studied. The dependence of the current increase on the concentration of perchlorate with different accumulation times is presented. The detection limit (3σ) is 50 μg˙l^?1 ClO₄ ^? (12 min accumulation). To show the applicability of the method to the analysis of real samples spiked drinking water was investigated.     

Solid Membranes of Copper Hriacyanoferrats (III) as Thallium (I) Sensitive Electrode

Abstract

Solid membranes of copper hexacyanoferrate (III) in Areldite are evaluated as thallium (I) sensitive electrode. The membrane electrode gave a linear near Normstian response to thallium (I) ions in the concentration range 10^?1 - 5 × 10^?4 M and can be used to estimate T1 (I) down to 10^?4 M. The responses of the electrode is fast and steady potentials are obtained in less than a minute. The same membrane has been used over a period of six months without any appreciable drift in potential. The electrode can also be used satisfactory in partially non-aqueous media and in presence of a number of interfering ions. It is superior to the existing T1(I) solid membrane electrodes as it can function in alkaline range also.     

1H NMR Spectra of Phenylthallium (III) Crown-Ether Complexes, [C6H5Tl (III)(Crown)X]n(ClO4) (n=1 OR 2); Trans Influence of The X Groups

Abstract

Trans influence of the X groups on the spin-pin coupling constants between the thallium nucleus and the meta protons of the phenyl group attached to the thallium atom, J(Tl-H^m), were studied for a number of phenylthallium (III) crown-ether complexes, [C₆H₅Tl (III) (crown)X]n(ClO₄) (n=1 or 2).     

Norfloxacin La(III)-based complex: synthesis,characterization, and DNA-binding studies

A La(III) complex, [La^IIICl₂(NOR)₂]Cl (2), containing norfloxacin (NOR) (1), a synthetic fluoroquinolone antibacterial agent, has been synthesized and characterized by elemental analysis, IR, UV–vis spectra and ¹H NMR spectroscopy, and molar conductance measurements. The interaction between 2 and CT-DNA was investigated by steady-state absorption and fluorescence techniques in different pH media, and showed that 2 could bind to CT-DNA presumably via non-intercalative mode and the La(III) complex showed moderate ability to bind CT-DNA compared to other La(III) complexes. The binding site number n, and apparent binding constant K_A, corresponding thermodynamic parameters ΔG^#, ΔH^#, ΔS^# at different temperatures were calculated. The binding constant (K_A) values are 0.23 ± 0.05, 0.56 ± 0.05, and 0.18 ± 0.08 × 10⁵ L mol^?1 for pH 4, 7, and 11, respectively. It was also found that the fluorescence quenching mechanism of CT-DNA by La(III) complex was a static quenching process.     

Separation Studies of Metal Ions in Sodium Thioglycolate Medium by Thin Layer Partition Chromatography

Abstract

A thin layer partition chromatographic method has been developed for separation of Fe(III), Ni(II), Zn(II), Cu(II), Pb(II) and Mn(II) on thin layers of silica gel-G as an adsorbent. The R_f values were determined using 0.01–0.2 aqueous solution of sodium thioglycolate as a mobile phase. The dependence of R_f values on the migration time, pH and concentration of mobile phase has been studied. The optimum conditions for possible 3-component separation have been determined. Metal ions have been separated, detected, eluted and quantitatively determined by atomic absorption spectroscopy. The present method was applied to the separation and determination of zinc in forensic samples.     

Polarographic Behaviour of Copper Complex with 3-(2′-Thiazolylazo)-2,6-diaminopyridine at Dropping Mercury Electrode

Abstract

The polarographic behaviour of Cu(II) has been investigated in the presence of increasing concentration of 3-(2′-Thiazolylazo)-2,6-Diaminopyridine (2,6-TADAP) at different pH values and in 50% ethanol. At all pH's the waves were found to be diffusion controlled and irreversible. The values of the kinetic parameters n_a, K_o and ? have been evaluated as a function of the ligand concentration. The maximum half-wave potential shifts were observed for the Cu(II) complex at pH 3.37. The polarographic wave height was proportional to the concentration of Cu(II). The method has also been applied to the determination of Cu(II) in aluminium alloys.     

Indirect Spectrophotometric Method for Determination of Sulfur Dioxide

Abstract

An operationally inexpensive and satisfactory analytical procedure for sulfur dioxide is proposed. The reagent 3-methyl-1,2-cyclopentanodione dithiosemicarbazone has been used to determine trace amounts of sulfur dioxide indirectly using the reduction of Fe(III) to Fe(II) principle. In order to find the optimal conditions for SO₂ determination, properties of 3-Me-CPDT-Fe(II) complex such as its composition, stability and free energy change of formation have been determined. The best conditions for the complex formation such as standing time, pH, wavelength and the effect of interfering ions are described. The complex has been used with success in spectrophotometric determination of SO₂. The procedure can determine down to 0.63 μg and recoveries are better than 97.5%. The method is also suitable for determination of sulfur dioxide in the air provided that interfering gases such as H₂S and NO₂ are removed.     

Extraction of lutetium(III) from aqueous solutions by employing a single fibre‐supported liquid membrane

Transport behaviour of Lu(III) across a polypropylene hollow fibre‐supported liquid membrane containing di(2‐ethylhexyl)phosphoric acid (DEHPA) in dihexyl ether as a carrier has been studied. The donor phase was LuCl₃ in the buffer solution consisting of 0.2 M sodium acetate at pH 2.5–5.0. A miniaturised system with a single hollow fibre has been operated in a batch mode. The concentration of Lu(III) was determined by indirect voltammetric method using Zn–EDTA complex. The effect of pH and volume of the donor phase, DEHPA concentration in the organic (liquid membrane) phase, the time of extraction and the content of the acceptor phase on the Lu(III) extraction and stripping behaviour was investigated. The results were discussed in terms of the pertraction and removal efficiency, the memory effect and the mean flux of Lu(III). The optimal conditions for the removal of ¹⁷⁷Lu(III) from labelled ¹⁷⁷Lu‐radiopharmaceuticals were discussed and identified. The removal efficiency of Lu(III) greater than 99% was achieved at pH of the donor phase between 3.5 and 5.0 using DEHPA concentration in the organic phase of 0.47 M and the ratio of the donor to the acceptor phase of 182.