The extraction of mercury(II), silver(I), cobalt(II) and cadmium(II) by dioctylarsinic acid in chloroform

Dioctylarsinic acid (HDOAA) in chloroform solution has been investigated as a reagent for the extraction of Hg(II), Ag(I), Co(II), and Cd(II). Silver, cobalt and cadmium are not extracted below pH 7. An extraction coefficient of 1.1, constant over the pH range 1–6.5, was observed for Hg(II). With HCl concentrations of 1–8 M the extractability of mercury decreased slowly, reaching E_a⁰ = 0.05 at 8 M HCl. Silver formed a silver dioctylarsinate precipitate which collected at the interface. The extraction coefficients for Hg(II), Co(II) and Cd(II) increased above pH 7 to values of 20 (pH 9.1), 30 (pH 8.0), and 23 (pH 10), respectively. Reagent- and pH-dependence studies indicated that Co(II) and Cd(II) are extracted as M(DOAA)₂ or M(DOAA)Cl through interaction of HDOAA with M(OH)₂ or M(OH)⁺. Mercury was extracted from solutions of pH 1–6.5 as HgCl₂ (HDOAA)_2.5.     

Synthesis,Spectral and Structural Characterization of the First Bis-2-Pyridylethanol Complexes of Mn(II), Fe(II), Co(II), Ni(II), Cu(II) and Zn(II) Saccharinates: Crystal Structures of Diaquabis(2-Pyridylethanol)Iron(II) and Copper(II) Saccharinates

The first 2-pyridylethanol (pyet) complexes of manganese(II), iron(II), cobalt(II), nickel(II), copper(II) and zinc(II) saccharinates, were synthesized and characterized by elemental analyses, magnetic measurements, UV-Vis, and IR spectroscopic techniques. Crystal and molecular structures of the iron(II) and copper(II) complexes were determined by single crystal X-ray diffractometry. The experimental data showed that all the complexes are mononuclear with a general formula [M(H₂O)₂(pyet)₂](sac)₂, where sac is the saccharinate anion. All the metal ions are octahedrally coordinated by two aqua and two pyet ligands. The pyet ligand acts as a bidentate ligand through its amine nitrogen and hydroxyl oxygen atoms forming a six-membered chelate ring, while the sac ions remain outside the coordination sphere. All the complexes are isomorphous with a monoclinic space group P2₁/n and Z = 2.     

Malonato-bridged hexamethylenetetramine coordination polymers containing Mn(II) and Cu(II)

Two malonato-bridged hexamethylenetetramine coordination polymers, M₂(hmt)(H₂O)₂(mal)₂ [hmt?=?hexamethylenetetramine, mal?=?malonate(2-), M?=?Mn (1), Cu (2)] were prepared and structurally characterized. The isostructural complexes are orthorhombic, space group Imm2, with a?=?7.104(1), b?=?15.982(3), c?=?7.702(1)?Å, Z?=?2, D _calc?=?1.862?g?cm^?3(1) and a?=?6.962(3), b?=?15.500(7), c?=?7.627(3)?Å, Z?=?2, D _calc?=?2.047?g?cm^?3for 2. The transition metals are octahedrally coordinated by one nitrogen atom of an hmt ligand and five oxygen atoms of a water molecule and three malonate anions. The latter coordinate in chelating/bis-monodentate mode to give 2D layers with a (4,?4) topology, and which are pillared by bridging bidentate hmt ligands to generate an open 3D framework with channels extending in the [001] direction. Over the temperature range 5–300?K, 2 behaves paramagnetically, following the Curie–Weiss law χ_m(T???θ)?=?4.521(6)?cm³mol^?1K with a Weiss constant θ?=??4.8(2)?K.     

Steric interaction of solvation and sterically enhanced halogeno complexation of manganese(II), cobalt(II) and nickel(II) ions inN,N-dimethylacetamide

The complexation of manganese(II), cobalt(II) and nikel(II) with bromide ions has been studied in N,N-dimethylacetamide(DMA) by calorimetry and spectrophotometry. The formation of [MBr]⁺, [MBr₂] and [MBr₃]^– (M=Mn, Co, Ni) was revealed in all the metal systems. Interestingly, the complexation is significantly enhanced in DMA over N,N-dimethylformamide (DMF). This is unusual because physicochemical properties of DMA and DMF as solvent are similar. Furthermore, extracted electronic spectra of individual complexes of Ni^II suggested the presence of a geometry equilibrium, [NiBr(DMA)₅]⁺=[NiBr(DMA)₄]⁺+ DMA, in DMA. A similar geometry equilibrium is also suggested, [NiBr₂(DMA)₃]=[NiBr₂(DMA)₂]+DMA. Such geometry equilibria were not observed in DMF. With regard to cobalt(II), electronic spectra show the presence of the four-coordinated [CoBr(DMA)₃]⁺ complex in DMA, unlike the six-coordinated [CoBr(DMF)₅]⁺ one in DMF. These facts suggest that a specific strong steric interaction operates between coordinating solvent molecules, which plays a key role in the complexation behavior of the divalent transition metal ions in DMA.     

Analytical Separation of Copper(II), Cobalt(II) and Nickel(II) Using Polymer Bound Anthrantic Acid

Abstract

The preferential complexing tendency of different nietal ions towards chelating agents anchored on a polymer has been used for separation of transition metals. the anthranilic acid group was anchored on the polymeric cellulose back-bone by successive coupling with trifunctional reagent cyanuric chloride, in diozane medium, at pH 7 and 9–10, respectively. This polymer bound chelating agent was used to separate copper(II), nickel(II) and cobalt(II) in the concentration range 1.0–0.1 mmol/L. the separation of a mixture of two components was quantitative using column chromatography.     

Metal complexes of sulphur-nitrogen chelating agents. Part 14. Nickel(II), palladium(II), copper(II), cobalt(II), and cobalt(III) complexes of the tetradentate schiff bases having ONNS donor sites

Summary Complexes of nickel(II), palladium(II), copper(II), cobalt(II), and cobalt(III) with methyl-2-(-salicylaldiminoethyl)-cyclopent-1-en-dithiocarboxylate (H₂L¹) and methyl-2-(-salicylaldiminoisopropyl)cyclopent-1-en-dithiocarboxylate (H₂L²) have been prepared. They contain the donor sites ONNS. The metal(II) ions from neutral, monomeric square planar chelate complexes. The cobalt(III) complexes [CoL¹-(H₂O)₂]X (X=Cl or ClO₄) appear to betrans-diaqua-species. All compounds have been characterized by a number of physico-chemical methods.     

Amberlite XAD-7 impregnated with Xylenol Orange: a chelating collector for preconcentration of Cd(II), Co(II), Cu(II), Ni(II), Zn(II) and Fe(III) ions prior to their determination by flame AAS

A new chelating resin, Xylenol Orange coated Amberlite XAD-7, was prepared and used for preconcentration of Cd(II), Co(II), Cu(II), Fe(III), Ni(II) and Zn(II) prior to their determination by flame atomic absorption spectrophotometry. The optimum pH values for quantitative sorption of Cd(II), Co(II), Cu(II), Fe(III), Ni(II) and Zn(II) are 4.5–5.0, 4.5, 4.0–5.0, 4.0, 5.0 and 5.0–7.0, respectively, and their desorptions by 2 mol L^–1 HCl are instantaneous. The sorption capacity of the resin has been found to be 2.0, 2.6, 1.6, 1.6, 2.6 and 1.8 mg g^–1 of resin for Cd, Co, Cu, Fe, Ni and Zn, respectively. The tolerance limits of electrolytes, NaCl, NaF, NaI, NaNO₃, Na₂SO₄ and of cations, Mg²⁺ and Ca²⁺ in the sorption of the six metal ions are reported. The preconcentration factor was between 50 and 200. The t_1/2 values for sorption are found to be 5.3, 2.9, 3.2, 3.3, 2.5 and 2.6 min for the six metals, respectively. The recoveries are between 96.0 and 100.0% for the different metals at preconcentration limits between 10 to 40 ng mL^–1. The preconcentration method has been applied to determine the six metal ions in river water samples after destroying the organic matter (if present in very large amount) with concentrated nitric acid (RSD ≤ 8%, except for Cd for which it is upto 12.6%) and cobalt content of vitamin tablets with RSD of ～ 3.0%.     

Synthesis,structures, and characterization of copper(II), nickel(II), and cobalt(III) metal complexes derived from an asymmetric bidentate Schiff-base ligand

An asymmetric bidentate Schiff-base ligand (2-hydroxybenzyl-2-furylmethyl)imine (L–OH) was prepared. Three complexes derived from L–OH were synthesized by treating an ethanolic solution of the appropriate ligand with an equimolar amount of metallic salt. Three complexes, Cu₂(L–O^?)₂Cl₂ (1), Ni(L–O^?)₂ (2) and Co(L–O^?)₃ (3), have been structurally characterized through elemental analysis, IR, UV spectra and thermogravimetric analysis. Single crystal X-ray diffraction shows metal ions and ligands reacted with different proportions 1?:?1, 1?:?2 and 1?:?3, respectively, so copper(II), nickel(II), and cobalt(III) have different geometries.     

Liquid chromatographic determination of chelates of cobalt (II), copper (II) and iron (II) with 2-thiophonaldehyde-4-phenyl-3-thiosemicarbazone

Summary A new chelating reagent 2-thiophenaldehyde-4-phenyl-3-thiosemicarbazone (TAPT) has been examined for high performance liquid chromatographic (HPLC) separations of cobalt (II), copper(II) and iron (II) or cobalt (II), nickel (II), iron (II), copper (II) and mercury (II) as metal chelates on a C₁₈, 5μm column (250×4 mm i.d.) The chelates were eluted isocratically with methanol: acetonitrile: water containing sodium acetate and tetrabutylammonium bromide (TBA), and detected at 254 nm. A solvent extraction procedure was developed for simultaneous determination of the metals with detection limits within 0.02–2.5 μ g.mL⁻¹. The method was applied to the determination of copper, cobalt and iron in natural waters.     

Synthesis and characterization of 2,3-bis(hydroxyimino)-1,2,3,4-tetrahydro-pyrido[2,3-b]pyrazine and its nickel(II), cobalt(II), copper(II), palladium(II), cadmium(II) and cobalt(III) complexes

Summary 2,3-Bis(hydroxyimino)-1,2,3,4-tetrahydro-pyrido[2,3-b]pyrazine (H₂L), prepared from 2,3-diaminopyridine and cyanogen-di-N-oxide has been converted into nickel(II), palladium(II), copper(II), cobalt(II), and cobalt(III) complexes (H₂L) with a 12 metal:ligand ratio. The ligands coordinate through the two N atoms, as do most vicinal dioximes. [(LH)Cl(H₂O)Cd], contains a six-membered chelate ring. [Co(HL)₂(L)Cl] has also been prepared using triphenylphosphine, triphenylarsine, thiophene and chloride as axial ligands. The structure of thevic-dioxime and its complexes are proposed on the basis of elemental analysis, i.r.,¹H-n.m.r. and uv-visible measurements.     

Synthesis,characterization, and electrochemical studies of Co(II,III) dithiocarbamate complexes

Cobalt(II) complexes of N-methyl phenyl, 1-phenylpiperazyl, and morpholinyl dithiocarbamates have been synthesized and characterized by UV–Visible, FTIR, ¹H-, ¹³C-NMR, and mass spectrometry. The spectroscopic data indicated that two ligands coordinated in bidentate chelating to the metal ion to form four-coordinate cobalt(II) complexes (1–3), which was confirmed by mass analysis (TOF MS ES⁺) of the complexes with m/z [M]⁺ = 450.98, 382.94, and 382.94 for 1, 2, and 3, respectively. Single crystal analysis of 2A and 3A show centrosymmetric mononuclear cobalt(III) bonded to three dithiocarbamate ligands forming a distorted octahedral geometry, indicating the cobalt(II) undergoes aerial oxidation to cobalt(III) during recrystallization. In addition, 2A crystallized with one solvated molecule of toluene. The redox behaviors of the complexes were studied by cyclic and square wave voltammetry in dichloromethane; the result revealed a metal centered redox process consisting of a one-electron quasi-reversible process assigned to Co(III)/Co(IV) oxidation and a corresponding Co(IV)/Co(III) reduction. Randles–Sevcik plots (anodic peak current versus the square root of the scan rate (I_p,a versus ν^1/2)) for the redox couples revealed diffusion-controlled behavior.     

Synthesis,Crystal Structure and Characterization of Polynuclear Potassium(I), Copper(II) and Cobalt(II) Complex with Acetylacetonethylenediamine

The title complex [K{Cu(acen)}₃]₂[Co(NCS)₄]·1/4CH₃OH (acen = acetylacetonethylenediamine anion) has been prepared and characterized. Single-crystal x-ray analysis reveals that the complex crystallizes in space group P I with a = 11.442(2), b = 15.098(3), c = 28.500(4) Å, α = 82.77(1), β = 83.58(1), γ = 85.07(1)°. The crystal consists of the complex [K{Cu(acen)}₃]⁺ cations, [Co(NCS)₄]^2? anions and methanol molecules. Three [Cu(acen)] molecules function as bridging ligands through phenolic O atoms to one K⁺ to give the tetranuclear [K{Cu(acen)}₃]⁺ cation. Each copper(II) atom in the cation is in a square-planar geometry, being coordinated by two oxygen atoms and two nitrogen atoms from a quadridentate acen ligand. The cobalt(II) atom is coordinated by four nitrogen atoms of thiocyanate ligands, forming a deformed tetrahedral environment. The IR and UV-Vis spectra have also been investigated.     

Etude des complexes sulfosalicylate de cuivre(III), nickel(II), cobalt(II) et uranyle(II) a l'aide d'une resine echangeuse de cations: Study of the sulphosalicylate complexes ofcopper(II), nickel(II), cobalt(II) and uranyl(II) by means of cation-exchange resins.

Study of the sulphosalicylate complexes of copper(II), nickel(II), cobalt(II) and uranyl(II) by means of cation-exchange resins.The conditional stability constants of the 1:1 complexes of the sulphosalicylate ions (L^3-) with copper(II), nickel(II), cobalt(II) and uranyl ions have been determined in a sodium perchlorate solution (0.1 M) and at various pH values by a cation-exchange method based on Schubert's procedure. The limits of application of the method are discussed. The variation with pH of the conditional stability constants can be explained by the existence of the complexes: CuH₂L, CuHL, CuL^-; NiH₂L⁺, NiHL, NiL^-; CoHL, CoL^-; UO₂H₂L⁺, UO₂HL, UO₂L^-, UO₂LOH^2-. The stability constants of these complexes are reported. Distribution diagrams of the various complexes of each element with pH and total concentration of sulphosalicylate parameters are given.     

The extraction-spectrophotometric determination of chromium(III) with 4-(2-pyridylazo)-resorcinol

The extraction-spectrophotometric determination of chromium(III) with 4-(2-pyridylazo)-resorcinol (PAR) is described. PAR(H₂R) forms a 1:3 complex with chromium(III) in a boiling acetate buffer solution at pH 5. The complex forms an ion-association compound with tetradecyldimethylbenzylammonium ion (TDBA⁺):Cr(R)(HR)₂^--TDBA⁺ which can be extracted into chloroform, the molar absorptivity being 4.7 ·10⁴ at 540 nm. If EDTA is added as a masking agent after the Cr(HR)₃ has been formed, only iron, cobalt and nickel interfere seriously, and the method can be made specific for chromium by a preliminary extraction of these metals with cupferron. The sensitivity of the method is seven times higher than that of the diphenylcarbazide method.     

Synthesis and characterization of metal complexes of Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Ru(III), Rh(III) and Pd(II) with derivatives of 1,3,4-thiadiazole-2,5-dithiol as new ligands

The synthesis of some new transition metal complexes with 1,3,4-thiadiazole-2,5-dithiol derivatives (L₁ and L₂) as new ligands is reported. Each complex was prepared by the reaction of the ligands with the appropriate metal salts (CrCl₃, MnCl₂·4H₂O, FeCl₃, CoCl₂·6H₂O, NiCl₂·6H₂O, CuCl₂·2H₂O, RuCl₃, RhCl₃ and PdCl₂). Elemental micro analysis (C.H.N.), UV–Visible spectroscopy, ¹H NMR, infrared (IR) spectroscopy, atomic absorption, magnetic susceptibility, continuous variation method and molar conductance techniques were used to characterize the structural formulae of these chelate complexes.     

A linear trinuclear cobalt(II) complex with 4-(2-pyridine)-1,2,4-triazole: synthesis,structure and characterization

The linear trinuclear cobalt(II) complex [Co₃(pytrz)₆(H₂O)₆](NO₃)₆ (1) with pytrz = 4-(2-pyridine)-1,2,4-triazole has been prepared and characterized. It crystallizes in the rhombohedral R-3 space group with Z = 3, a = 13.955(2), b = 13.955(2), c = 28.942(9) Å, γ = 120°, V = 4881.2(18) ų. The structure of 1 comprises the cation [Co₃(pytrz)₆(H₂O)₆]⁶⁺, in which linear trinuclear Co(II) units are bridged by six L ligands and have six aqua molecules as terminal ligands. The six free nitrates link the terminal aqua ligands through N–H ··· O hydrogen bonds with C₃ symmetry. 1 was characterized by FT-IR, electronic spectra and magnetic measurements. The variable-temperature magnetic measurements reveal weak anti-ferromagnetic interactions in 1.     

Composition and stability of copper(II), nickel(II), and cobalt(II) complexes with mono- and bis(2-carboxy)-2-pycolylamine

Complexation of N-(2-pyridyl)methyl-3-aminopropionic (HL¹) and N-(2-pyridyl)methyliminodipropionic (H₂L²) acids with copper(II), nickel(II), and cobalt(II) ions is studied. The composition of complexes is determined using the Starik–Barbanel relative yield method. The acid dissociation constants of HL¹ and H₂L² are determined potentiometrically; the stability constants of HL¹ and H₂L² complexes with metal ions are calculated.     

Solvent extraction of cobalt(II), zinc(II) and europium(III) with 4-thiobenzoyl-2,4-dihydro-5-methyl-2-phenyl-3H-pyrazol-3-one (SBMPP)

Solvent extraction of⁶⁵zinc,⁶⁰cobalt and^152+154europium from aqueous buffers into benzene containing 4-thiobenzoyl-2,4-dihydro-5-methyl-2-phenyl-3H-pyrazol-3-one (SBMPP) has been investigated in detail (μ=0.1, T=26±1°C). The species extracted and the values of log K_ex, where K_ex refers to the extraction equilibrium, are ZnL₂ (−2.68) CoL₂(−3.08) and EuL₃(−7.08), where L is the anion of the ligand. The sulfur analog appears to be more effective than the parent ligand 4-benzoyl-2,4-dihydro-5-methyl-2-phenyl-3H-pyrazol-3-one in the extraction of zinc(II) and cobalt(II), whereas the reverse is true with europium(III).     

Iron(III), nickel(II) and zinc(II) complexes based on acetophenone-S-methyl-thiosemicarbazone: synthesis,characterization, thermogravimetry,and a structural study

New complexes, [Fe(L)Cl], [Ni(L)], and [Zn(L)C₂H₅OH] (1–3), were synthesized by template reaction of 2-hydroxy-acetophenone-S-methyl-thiosemicarbazone with 2-hydroxy-benzaldehyde. The compounds were characterized by elemental analysis, magnetic measurements, FT-IR, ¹H NMR, UV–visible, and ESI–MS spectra. In these complexes, the ligand is coordinated to the metal ion as dinegatively charged tetradentate chelating agents via the N₂O₂ donor set. The iron(III) and zinc(II) complexes exhibit square pyramidal geometry whereas the nickel(II) complex has a square planar geometry. The crystal structure of 1, determined by X-ray diffraction method, indicates that 1 crystallizes in the monoclinic space group P21/c with Z = 4. Thermal decompositions of the compounds have been investigated using TGA in air.     

pH-Driven Variation of the Outer-Sphere Binding Mode of cis-[Co(Ad)(en)2Cl]Cl (en-Ethylendiamine, Ad-Adeninate) with p-Sulfonatothiacalix[4]arene

The non-symmetrical cobalt (III) complex cis-[Co(Ad)(en)₂Cl]Cl (1Cl), possessing two flexible ethylendiaminate chelate rings (en) and monodentate N(9)-bound adeninate (Ad^-) was chosen as the guest of p-sulfonatothiacalix[4]arene (STCA) to study the inclusion complex formation at wide range of pH 2–10. It was shown by ¹H, NOE NMR methods and pH-metric procedure, that pH-driven variation of the inclusion mode of 1 ⁺ into calixarene cavity is the result of the protonation of 1 ⁺ via adeninate moiety.