Chemiluminescence Flow Injection Analysis of Menadione Sodium Bisulfite Based on Luminol Reaction

ABSTRACT

A chemiluminescence(CL) flow system is described for the determination of menadione sodium bisulfite based on its repression on the chemiluminescence(CL) emission produced upon mixing a hexacyanoferrate(III) solution with an alkaline luminol solution in the absence of co-oxidizer. The system responds linearly to menadione sodium bisulfite concentration in the range 0-1 μg/mL with a detection limit (3σ) of 0.01 μg/mL. Relative standard deviation (RSD) of 0.16% for 0.4 μg/mL menadione sodium bisulfite (n=11). The system has been successfully applied to the determination of menadione sodium bisulfite in tablets and injections.     

Flow Injection Chemiluminescence Determination of Gentamycin Using On-Line Electrogenerated Co(III) As the Oxidant

ABSTRACT

A novel flow-injection Chemiluminescence (CL) system for the determination of gentamycin is described, based on the direct chemiluminescence reaction of gentamycin and Co(III) in sulfuric acid media. The unstable strongly oxidative Co(III) was electrogenerated on-line with constant current electrolysis. The chemiluminescence intensity was linear with gentamycin concentrations of 0.01～80μg/ml, the detection limit being 0.005μg/ml. The whole process could be completed in 1 min with a relative standard deviation of less than 3.2%. The proposed method is rapid and simple and is suitable for automatic and continuous analysis. This method has been applied satisfactorily to the analysis of gentamycin in pharmaceutical preparations.     

Luminol-K_3[Fe(CN)_6]流动注射化学发光体系检测头孢吡肟

在碱性介质中,头孢吡肟对Luminol-K3[Fe(CN)6]化学发光体系具有明显的增强作用,基于此建立了流动注射化学发光法测定头孢吡肟的新方法。在优化实验条件下,化学发光增强强度与头孢吡肟的浓度在3.0×10-6~4.0×10-5g/m L范围内呈良好的线性关系,检出限为2.8×10-6g/m L。对2.0×10-5g/m L头孢吡肟平行测定11次,相对标准偏差(RSD)为1.5%。该方法用于头孢吡肟针剂的测定,结果满意。     

Sensitive determination of Fenamiphos in water samples by flow injection photoinduced chemiluminescence

In this work, a sensitive flow injection chemiluminescence (FI-CL) method for the determination of nematicide Fenamiphos in a rapid and simple way is proposed. Fenamiphos is first photodegraded in basic medium. These photofragments react with Ce(IV) providing the chemiluminescence signal. To the authors’ knowledge, no chemiluminescence method has been described in the literature for the determination of the nematicide Fenamiphos. All physical and chemical parameters in the flow injection chemiluminescence system were optimized in order to obtain the best sensitivity, selectivity and sample throughput. Before the injection of the sample in the FI-CL system, a preconcentration step with solid phase extraction C18 cartridges was performed. By applying solid phase extraction (SPE) to 250?mL of standard (final volume 10?mL), the linear dynamic range was between 3.4 and 60?µg?L^?1, and the detection limit was 1?µg?L^?1. When SPE was applied to 500?mL of standard (final volume 10?mL), the detection limit was 0.5?µg?L^?1. These detection limits are below the emission limit value established by the Spanish Regulations of the Hydraulic Public Domain for pesticides (50?µg?L^?1) and of the same order as the limit established for total pesticides (0.5?µg?L^?1) at European Directive on the quality of water for human consumption. The sample throughput was 126 hour^?1. Intraday and interday coefficients of variation were below 10% in all cases. No interference was registered in presence of usual concentrations of anions, cations and other organophosphorus pesticides. The method was successfully applied to the analysis of environmental water samples, obtaining recoveries between 96 and 107.5%.     

Luminol-K2S2O8体系中金属离子化学发光行为的研究

报导了在自行设计的流动注射式化学发光分析仪上,对Luminal-K2S2O8体系中32种金属离子的化学发光行为的系统研究.确定了对金属离子的最优测定条件以及大多数金属离子的检出极限和线性范围.     

Sensitive Chemiluminescence Determination of Three Thiol Compounds Based on Cu(II)-Catalyzing Luminol Reaction in the Absence of an Oxidant

Abstract

A simple and sensitive flow-injection chemiluminescence method was proposed for the determination of three thiol compounds, namely cysteine, acetylcysteine, and glutathione. Weak chemiluminescence was produced directly by the reaction of these mentioned compounds with luminol in an alkaline solution without adding any special oxidants. The chemiluminescence signal could be significantly enhanced by Cu(II). The proposed method allows the determination of 4.0 × 10^?9 to 1.0 × 10^?7 g/mL cysteine, 7.0 × 10^?10 to 1.0 × 10^?7 g/mL acetylcysteine, and 4.0 × 10^?9 to 1.0 × 10^?6 g/mL glutathione with the detection limits of 8 × 10^?10 g/mL, 2 × 10^?11 g/mL, and 7 × 10^?10 g/mL, respectively. The proposed method was applied to the analysis of some commercial formulations containing acetylcysteine.     

基于纳米TiO2的化学发光法检测核黄素

纳米TiO2与NaOH溶液作用能产生化学发光辐射,在表面活性剂十六烷基三甲基溴化铵(CTAB)的存在下,核黄素的加入能增强纳米TiO2-NaOH溶液的化学发光强度。基于此,构建了纳米TiO2-NaOH溶液化学发光新体系,建立了纳米TiO2-NaOH-核黄素体系检测核黄素的化学发光新方法。在优化实验条件下,核黄素质量浓度在5.0×10-6～3.5×10-4g/mL范围内与化学发光强度呈良好的线性关系,检出限为3.0×10-6g/mL,对2.5×10-5g/mL的核黄素进行11次平行测定,相对标准偏差为2.9%。该方法用于维生素B2片剂的测定,其结果与药典方法测得一致。该文同时对化学发光反应的机理进行了初步探讨。     

Determination of Sulfur Compounds in Air by Chemiluminescence

Abstract

The present review is devoted to applications of chemiluminescence to the analysis of trace sulfur species in air. Determinations of oxidized (sulfur dioxide and sulfite), reduced (hydrogen sulfide, dimethyl sulfide, carbonyl sulfide, carbon disulfide and mercaptans) and/or sulfur compounds in general are described and some practical considerations are discussed. The development of detectors based on chemiluminescence in the aproximately last fifteen years is also reviewed.     

Flow Injection Chemiluminescence Determination of Isoniazid Using On-Line Electrogenerated Manganese(III) as Oxidant

A novel flow injection chemiluminescence (CL) system for the determination of isoniazid has been proposed. It is based on the direct CL reaction of isoniazid and Mn(III) in sulfuric acid medium. The unstable Mn(III) was on-line electrogenerated by constant current electrolysis. The CL emission intensity was linear with isoniazid concentration in the range 0.1–10 μg/mL; the detection limit was 3.2 × 10⁻² μg/mL. The whole process could be completed in 1 min with a relative standard deviation of less than 5%. The proposed method is suitable for automatic and continuous analysis and has been applied successfully to the analysis of isoniazid in pharmaceutical preparation.     

Europium(III)-Sensitized Chemiluminescence Determination of Ibuprofen in Pharmaceutical Preparations and Biological Fluids

Abstract

Chemiluminescence reaction of the system containing europium(III) ion, KMnO₄, Na₂SO₃, and ibuprofen was investigated for the determination of ibuprofen. The introduction of Eu(III) ion into the system of KMnO₄-Na₂SO₃-ibuprofen caused a significant increase in the chemiluminescence signal. The increment of the chemiluminescence signal is proportional to ibuprofen concentration in the range of 5.0 × 10^?8–5.0 × 10^?6 g/ml with a detection limit of 1 × 10^?8 g/ml. The relative standard deviation for 1.0 × 10^?7 g/ml ibuprofen solution was 1.7% (n = 11). The proposed method was successfully applied to determine ibuprofen in tablets and human plasma.     

A Study on the Reaction of Protein with Arsenazo III by Rayleigh Light Scattering Technique

Abstract

A new rayleigh light scattering (RLS) assay of protein was conducted in this paper. The weak RLS of arsenazo III can be enhanced greatly by the addition of proteins. Based on this, the reaction of arsenazo III and proteins was studied. A new quantitative determination method for proteins has been developed. This method is very sensitive (0.085(021.25 μg/mL for BSA), rapid (<1min), simple (one step) and free of interference from most diverse substances.     

The use of Chromazurol S in the presence of a mixture of cationic and non-ionic surfactants for the spectrophotometric determination of iron in cereals

Simple and sensitive methods for the spectrophotometric determination of iron(III) in food, based on the formation of coloured complexes of Fe(III) with Chromazurol S (CAS) in the presence of tetradecyltrimethylammonium bromide (TTA) or octadecyltrimethylammonium chloride (ODTA) and Triton X-100 (TX100), have been developed. Optimum pH and the concentrations of CAS, TTA, ODTA, and TX100 ensuring maximum absorbance have been determined. For the Fe-CAS-TTA-TX100 system the molar absorptivity is 1.12 × 10⁵ L/(mol cm) at 650 nm; for Fe-CAS-ODTA-TX100 it is 1.35 × 10⁵ L/(mol cm) at 659.5 nm. Beer’s law was obeyed for iron concentration in the range 0.08–0.56 μg/mL for the complex Fe-CAS-TTA-TX100 and 0.08–0.64 μg/mL for Fe-CAS-ODTA-TX100. The influence of several interfering ions has been discussed. The stoichiometry of the complexes was established by applying Job’s method. The more sensitive method, based on the Fe-CAS-ODTA-TX100 system, has been applied to the determination of iron in cereals. To evaluate the accuracy of the elaborated method, the determined content of Fe was compared to the declared value as well as to the result obtained by the reference ICP-OES method.     

Preparation of manganese dioxide loaded activated carbon adsorbents and their desulfurization performance

Manganese dioxide loaded activated carbon adsorbents (MnO₂/AC) were prepared and characterized by N₂ adsorption-desorption, BET method, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectrometry (FT-IR) and scanning electron microscopy (SEM). Effects of preparation conditions and adsorption conditions on desulfurization performance of the adsorbents were studied in a fixed-bed adsorption apparatus. Experimental results show that the surface area and pore volume of MnO₂/AC decreased compared with the unmodified activated carbon, but the adsorption capacity to H₂S was improved greatly. A suitable H₂S removal activity was obtained with manganese dioxide to activated carbon ratio of 1.1: 1 and the calcination temperature of 250°C. At the adsorption temperature of 40°C and gas flow rate of 20 mL/min, the H₂S saturation capacity and H₂S removal rate reached up to 713.25 mg/g and 89.9%, respectively.     

Study on a Fluorometric Method for the Determination of Protein in Serum Using Quercetin‐Lanthanum (III)‐Sodium Dodecyl Benzene Sulfonate‐Protein System

Abstract

It was found that the fluorescence intensity of lanthanum (III) (La³⁺)‐quercetin (Qu) complex is greatly enhanced by proteins in the presence of sodium dodecyl benzene sulfonate (SDBS). Based on this finding, a new fluorimetric method for the determination of proteins was developed. Under optimum conditions, the enhanced intensity of fluorescence is in proportion to the concentration of proteins in the range of 2.5×10^?8 to 1.0×10^?5 g/mL for bovine serum albumin (BSA), 5.0×10^?8 to 1.5×10^?5 g/mL for human serum albumin (HSA), and 1.0×10^?7 to 1.5×10^?5 g/mL for egg albumin (EA). Their detection limits (S/N=3) are 5.0×10^?9 g/mL, 7.0×10^?9 g/mL, and 2.1×10^?8 g/mL, respectively. The interaction mechanism was also studied.     

Chemiluminescence flow system for the determination of Fe(II) and Fe(III) in water

A novel chemiluminescence (CL) flow system has been developed for the sequential determination of Fe(II) and Fe(III) in water. Fe(II) was detected by its catalytic effect on the CL reaction between luminol immobilized on an anion exchange resin column and dissolved oxygen; Fe(III) was determined by difference measurement after on-line conversion to Fe(II) in a reducing mini-column packed with Cu plated Zn granules. For both ions, the calibration graph was linear in the range 1 × 10^–9 to 1 × 10^–6 g/mL, and the detection limit was 4 × 10^–10 g/mL. A complete analysis could be performed in 1.5 min with a relative standard deviation of less than 5%. The system could be reused for over 200 times and has been applied successfully to the determination of Fe(II) and Fe(III) in natural water samples.     

Flow‐Injection Chemiluminescence Analysis of Cloperastione Hydrochloride

Abstract

A new chemiluminescence (CL) reaction was observed when cloperastine hydrochloride was injected into the reaction mixture after the CL reaction of Ce(IV) and sodium sulfite finished. A new flow injection CL method for the determination of cloperastine hydrochloride was established based on the CL reaction. The relative standard deviation (RSD) for the determination of cloperastine hydrochloride was 1.3% (n=11, c=1.0×10^?6 g/mL). The CL intensity responded linearly to the concentration of cloperastine hydrochloride in the range 2.0×10^?7～2.0×10^?5 g/mL (r=0.9962). The detection limit was 5×10^?8 g/mL cloperastine hydrochloride. The method had been applied to the determination of cloperastine hydrochloride in tablets with satisfactory results.     

Use of A Novel Acetone-H2O2−C10− Chemiluminescence System for the Determination of Iodide Ion

Abstract

The present paper reports a new chemiluminescence system, i.e, acetone-H₂O₂?C10^?, which can be catalyzed by iodide ion (I^?). Based on this catalysis, a new chemiluminescence method for the determination of trace iodide ion is proposed. the optimum conditions are reported in this note. the detection limit is 2 × 10^?11 g/ml I^?, the linear dynamic range is 4 × 10^?10 g/ml to 3 × 10^?7 g/ml I^?, and the variation coefficient at an iodide concentration of 5 × 10^?9 g/ml I^? (n=10) is 4.6%. the method has been satisfactorily applied to the determination of trace iodide ion in water.     

基于一次性薄层色谱电极高选择电化学发光分析法测定Ni(II)的研究

基于一种新的电极制作方法, 研制了具有薄层色谱分离功能的一次性薄层色谱电极. 结合该电极的分离、保留分析物于电极表面一定空间区域的色谱分离能力与电极表面电化学发光信号的空间分辨能力, 实现了分析物的高效分离与原位高灵敏度电化学发光(ECL)检测, 建立了电化学发光分析方法与薄层色谱分离方法联用的新技术. 并以Ni^2＋离子为代表探讨了这一方法的可行性和分析特性. 在最佳的实验条件下, 该方法测定Ni^2＋离子的线性范围为5.0× 10^－9～5.0×10^－6 g/mL, 检出限为1.5×10^－9 g/mL, 相对标准偏差为2.8% (c＝1.0×10^－6 g/mL, n＝11).     

Development of a cloud point extraction and preconcentration method for chromium(III) and total chromium prior to flame atomic absorption spectrometry

A sensitive and selective method has been developed for the determination of chromium in water samples based on using cloud point extraction (CPE) preconcentration and determination by flame atomic absorption spectrometry (FAAS). The method is based on the complexation of Cr(III) ions with Brilliant Cresyl Blue (BCB) in the presence of non-ionic surfactant Triton X-114. Under the optimum conditions, the preconcentration of 50 mL of water sample in the presence of 0.5 g/L Triton X-114 and 1.2 × 10⁻⁵ M BCB permitted the detection of 0.42 μg/L chromium(III). The calibration graph was linear in the range of 1.5–70 μg/L, and the recovery of more than 99% was achieved. The proposed method was used in FAAS determination of Cr(III) in water samples and certified water samples. In addition, the developed CPE-FAAS method was also used for speciation of the inorganic chromium species after reduction of Cr(VI) to Cr(III) using a thiosulphate solution of 120 mg/L in the presence of Hg(II) ion as a stabilizer.     

Chemiluminescence flow system for the determination of Fe(II) and Fe(III) in water

A novel chemiluminescence (CL) flow system has been developed for the sequential determination of Fe(II) and Fe(III) in water. Fe(II) was detected by its catalytic effect on the CL reaction between luminol immobilized on an anion exchange resin column and dissolved oxygen; Fe(III) was determined by difference measurement after on-line conversion to Fe(II) in a reducing mini-column packed with Cu plated Zn granules. For both ions, the calibration graph was linear in the range 1 × 10^–9 to 1 × 10^–6 g/mL, and the detection limit was 4 × 10^–10 g/mL. A complete analysis could be performed in 1.5 min with a relative standard deviation of less than 5%. The system could be reused for over 200 times and has been applied successfully to the determination of Fe(II) and Fe(III) in natural water samples. Received: 13 March 1997 / Revised: 3 June 1997 / Accepted: 6 June 1997