Removal of Lead (II) Ions by Poly(2‐octadecyl butanedioic acid): Isothermal and Kinetic Studies

Poly(2‐octadecyl‐butanedioic acid), prepared from polyanhydride PA‐18, possesses novel heavy metal adsorption characteristics. The adsorption capacity of this water insoluble polymer for lead (II) was substantially higher than other heterogeneous adsorbants and is equivalent to those obtained with homogeneous sorbants. The polymer exhibited pseudo‐second‐order kinetics and nearly complete adsorption of lead occurred in 15 min with initial lead (II) concentrations greater than 100 mg · L^?1. Adsorptive behavior was accurately predicted by the Dubinin‐Radushkevich isotherm model. The mean free energy of adsorption of lead (II) onto poly(2‐octadecyl‐butanedioic acid) was determined to be 31.6 kJ · mol^?1, suggesting an ion exchange component to the adsorption mechanism. Gibb's free energy values for this process indicate that it is spontaneous. Adsorption was relatively independent of pH in the range of 3–5, due to the utilization of the sodium carboxylate form of the chelating groups, and was not influenced by high Na⁺ concentration and moderate concentrations (up to 200 mg · L^?1) of Ca⁺². Lead (II) solutions containing 2000 mg · L^?1 Ca⁺² did reduce the adsorption of 2000 mg · L^?1 lead (II) by 28%.     

Determination of Trenbolone Acetate in Cattle Feeds by a Flow Injection Chemiluminescence Method

A flow injection chemiluminescence (CL) method is described for the determination of trenbolone acetate based on the CL generated during its reaction with KMnO₄ in acidic medium. The CL intensity is greatly enhanced by alizarin yellow R. The CL intensity is linear with trenbolone acetate concentration in the range 0.1–100.0 mg L^?1 with a detection limit of 0.05 mg L^?1. The sample throughout is about 90 h^?1 and the relative standard deviation for 2.0 mg L^?1 trenbolone acetate solution is 1.5% (n = 11). The proposed method was applied to the determination of trenbolone acetate in cattle feeds.     

Simple, Rapid, and Accurate RP-HPLC Method for Determination of Cystine in Human Urine after Derivatization with Dansyl Chloride

An accurate, simple, and sensitive reversed-phase high-performance liquid chromatographic method, with loratadine as internal standard (IS) and UV detection at 286 nm, has been developed for deterination of cystine in human urine. The major innovations of the method include use of acrylonitrile to protect cysteine from oxidization to cystine, separation of cysteine, as the dansyl derivative, from cystine, and use of isocratic elution instead of gradient elution to reduce the time and cost of serial analysis. The mobile phase was 0.05 M sodium acetate–methanol, 35:65 (v/v), adjusted to pH 3.5 with 2.5 M citric acid, at a flow rate of 1.0 mL min^?1. The retention times of cystine and the IS were 16.6 and 19.9 min, respectively. The limit of detection for cystine was 0.3 mg L^?1. Extraction recovery of cystine was >85.6%. Intra-day and inter-day precision (RSD) for cystine were below 4.3 and 8.5%, respectively. There was no chromatographic interference from other α-amino acids present in mammalian proteins, or from other urine components. The calibration plot for the cystine derivative was linear in the range 1–500 mg L^?1 and the correlation coefficient was 0.9992. The method was validated appropriately and successfully used for determination of cystine in human urine.     

Fast Determination of Phenolic Compounds in Brazilian Wines from Vale do São Francisco Region by CE

Six phenolic compounds were separated and determined by capillary zone electrophoresis in red wine from Brazil’s region Vale do São Francisco with total analysis time of 12 min. The limit of detections varied from 1.59 to 2.24 mg L^?1. The relative standard deviations (for n = 6) varied from 0.28 to 3.50 %. The red wine samples analyzed were bought in the local market and the phenolic compound recoveries were in the range of 98–101 %. The concentrations of gallic acid in the samples of wines varied from 16.0 to 42.0 mg L^?1, caffeic acid (3.16–5.18 mg L^?1), syringic acid (5.73–13.0 mg L^?1), kaempferol (2.32–4.33 mg L^?1), quercetin (1.68–4.03 mg L^?1), myricetin (7.52–25.1 mg L^?1). The concentrations found agree with data reported in the literature.     

A SPE-LC-MS/MS Method for the Detection of Low Concentrations of Pharmaceuticals in Industrial Waste Streams

A SPE-LC-MS/MS method was developed and validated for the determination of three active pharmaceutical ingredients [API A (3-([2-(diaminomethyleneamino)thiazol-4-yl]methylthio)-N′-sulfamoyl propanimid amide, API B 5-[(2 R)-2-[2-(2-ethoxyphenoxy)ethylamino]propyl]-2-methoxybenzenesulfonamide hydrochloride, API C 1-azabicyclo[2.2.2]octan-8-yl (1S)-1-phenyl-3,4-dihydro-1H-isoquinoline-2-carboxylate] in the wastewater of a chemical synthesis production facility. The SPE-LC-MS/MS method was validated in actual influent and effluent samples. Linearity, LOD, LOQ, repeatability, intermediate precision, and recovery were determined. An LOQ of 400 μg · L^?1, 1.0 μg · L^?1, and 6 μg · L^?1, repeatability of 2.5% CV, 14.8% CV, and 11.9% CV, intermediate precision of 7.8% CV, 11.0% CV, and 8.7% CV and SPE recovery of 114%, 103%, and 91% was determined for API A, B, and C, respectively, in influent. An LOQ of 400 μg · L^?1, 0.8 μg · L^?1, and 6 μg · L^?1, repeatability of 2.0% CV, 11.0% CV, and 10.9% CV, intermediate precision of 1.7% CV, 6.8% CV, and 10.2% CV and SPE recovery of 116%, 96%, and 115% was established for API A, B, and C, respectively, in effluent. Coefficients of correlation for each analyte were >0.9301 confirming the linearity of the method. The LC-MS/MS method was used for an on-going monitoring program for these pharmaceuticals in wastewater. The method development techniques, validation procedures, and results from real wastewater samples are presented in this paper.     

Flow-Batch Method with a Sequential Injection System for Spectrophotometric Determination of Selenium(IV) in Selenium-Enriched Yeast Using o-Phenylenediamine

A precise, accurate, and reliable flow-batch spectrophotometric method for the determination of selenium (IV) was developed using o-phenylenediamine as a reagent with a sequential injection monosegmented flow system incorporating a simple heating unit. The reaction zones of selenium(IV) and o-phenylenediamine were mixed and heated in a chamber at 62°C for 5 minutes. The piaselanol complexes were then detected at a maximum absorption wavelength of 335 nm. In-line single standard calibration and standard addition procedures were developed employing the monosegmented flow technique. Under the optimized conditions, a linear calibration graph in a range of 0.1–4.0 mg L^?1 selenium (IV) was obtained with limits of detection and quantitation of 0.01 and 0.1 mg L^?1, respectively. Relative standard deviations were 2% [for both 0.1 and 0.5 mg L^?1 selenium (IV) (n = 11)]. A sample throughput of 2 h^?1 using four standard addition levels was achieved. The developed system was successfully applied to raw selenium-enriched yeast samples. The analyses performed by the developed method agreed well with those obtained from a standard inductively coupled plasma mass spectrometry method.     

Analysis of Carbamazepine in Tablet and Human Serum by Sweeping‐Micellar Electrokinetic Chromatography Method

Abstract

A sensitive and simple micellar electrokinetic chromatography (MEKC) method was developed for the determination of the antiepileptic drug carbamazepine (CBZ) using a sweeping on‐line concentration method with photodiode array detection. The effect of pH, concentration of the running buffer solution, organic modifier, applied voltage and injection time on the concentration efficiency and separation was investigated. An untreated fused‐silica capillary was used (50 cm; effective length, 40 cm, 75 µm i.d.) for the analysis. The background solution (BGS) was 50 mmol · L^?1 NaH₂PO₄ (pH 3.0) containing 100 mmol · L^?1 SDS and 20% acetonitrile (5.82 ms · cm^?1) with an applied voltage of ?20 kV at 25°C. Sample introduction was performed at 0.5 psi for 90 s with diode array detection at 214 nm. For the method, the calibration curve was linear over a range of 0.5–40 µg · mL^?1 for CBZ with a correlation coefficient of 0.998. The detection limit (S/N=3∶1) of CBZ was 0.10 µg · mL^?1. About 100‐fold improvement in concentration sensitivity was achieved in terms of peak height by the sweeping method compared to conventional injection method. The sweeping‐MEKC method has been successfully applied to the analysis of CBZ in tablet and human serum.     

Ciprofloxacin and Norfloxacin Spectrophotometric Determination in a Fully Automated Multi-Pumping Flow System

A flow-based methodology for the spectrophotometric determination of ciprofloxacin and norfloxacin, based on the oxidation with N-bromosuccinimide in acidic medium, was developed. The proposed procedure was implemented in a multi-pumping flow system, which provided excellent mixing conditions due to the pulsed flow produced by solenoid micro-pumps actuation, resulting on a sensitive, simple, fast, and versatile analytical method. Linear calibration plots were obtained for ciprofloxacin and norfloxacin concentrations ranging from 5 to 70 mg L^?1 with an R.S.D < 2.2% (n = 10). Detection limits (3σ) were 0.27 mg L^?1 and 0.99 mg L^?1 for norfloxacin and ciprofloxacin, respectively.     

Spectrophotometric Determination of Gold in Water and Ore with 2‐Carboxyl‐1‐Naphthalthiorhodanine

Abstract

This paper reports on the synthesis of a new chromogenic reagent, 2‐carboxyl‐1‐naphthalthiorhodanine (CNTR). A high sensitive, selective, and rapid method for the determination of gold based on the rapid reaction of gold with CNTR and the solid phase extraction of the colored chelate with a reversed phase polymer‐based C₁₈ cartridge was developed. In the presence of 0.05–0.5 mol L^?1 of phosphoric acid solution and emulsifier‐OP medium, CNTR reacts with gold to form a red chelate of a molar ratio 1∶3 (gold to CNTR). This chelate was enriched by the solid phase extraction with a polymer‐based C₁₈ cartridge and the retained chelate was eluted from the cartridge with dimethyl formamide (DMF). The enrichment factor of 100 was achieved. In the DMF medium, the molar absorptivity of the chelate is 1.35×10⁵ L · mol^?1 · cm^?1 at 540 nm. Beer's law is obeyed in the range of 0.01～2 µg mL^?1 in the measured solution. The relative standard deviation for 11 replicates sample of 0.5 µg L^?1 level is 2.05%. The detection limit, based on three times the standard deviation is 0.02 µg L^?1 in the original sample. This method was applied to the determination of gold in water and ore with good results.     

Evaluation of the Counter Ions in Doped Porous Polyaniline Coatings on Stainless Steel Wires for Solid Phase Microextraction of Chlorophenolics in Water Combined with High-Performance Liquid Chromatography

Porous polyaniline coatings doped with different counter ions were electrodeposited on the surface of stainless steel wires using controlled potentiostatic coulometry. Prior to electropolymerization, the stainless steel wires were chemically etched to improve subsequent immobilization of the polyaniline coatings on the substrate and to increase the effective surface area. Porous polyaniline coatings doped with sulfate, nitrate, and perchlorate counter ions were employed for solid-phase microextraction (SPME) of 2-chlorophenol, 2,4-dichlorophenol, triclosan, and 2,4-dichlorophenoxyacetic acid coupled to high-performance liquid chromatography. The results demonstrated that the perchlorate doped polyaniline coating exhibited the highest extraction efficiency for 2-chlorophenol, 2,4-dichlorophenol, and triclosan at pH 5.0, indicating that the extraction capability was modified by introducing different counter ions into the coatings. As a result, the perchlorate doped polyaniline coated fiber was further used for the optimization of extraction condition s . The method provided linear dynamic ranges over 2 to 4 orders of magnitude. The limits of detection were 0.006 µg · L^?1, 0.005 µg · L^?1, and 0.040 µg · L^?1 for 2-chlorophenol, 2,4-dichlorophenol, and triclosan, respectively. The precision expressed as the relative standard deviation ranged from 2.20% to 5.04% for spiked water at 10 µg · L ^?1 (n = 5) and the fiber to fiber reproducibility was between 3.27% and 5.91% (n = 5). The method was successfully applied to the determination of chlorophenolics in real water samples. The recoveries of chlorophenolics in spiked water at 5.0 µg · L^?1 were between 99.60% and 108.7% with relative standard deviations between 3.24% and 5.47%.     

A stir foam composed of graphene oxide,poly(ethylene glycol) and natural latex for the extraction of preservatives and antioxidant

A stir foam composed of graphene oxide, poly(ethylene glycol) and natural latex (GO-PEG-NL) was prepared for use in micro-solid phase extraction sorbent of preservative agents and antioxidants from cosmetic products. The extracted analytes were quantified by GC-MS. Under the optimized conditions, the calibration plots are linear in the concentration ranges between 5.0 μg·L^?1 to 1.0 mg·L^?1 for benzoic acid, of 10.0 μg·L^?1 to 1.0 mg·L^?1 for 2-methyl-3-isothiazolinone (MI), and between 1.0 μg·L^?1 and 1.0 mg·L^?1 for both 3-tert-butyl-4-hydroxyanisole (BHA) and 2,6-di-tert-butyl-p-hydroxytoluene (BHT). The LODs are 1.0 μg·L^?1 for benzoic acid, 5.0 μg·L^?1 for MI and 0.5 μg·L^?1 for both BHA and BHT. The stir-foam can be easily prepared, is inexpensive and well reproducible (RSDs <3%, for n?=?6). It can be re-used for up to 12 times after which extraction efficiency has dropped to 90%. The method was successfully applied to the determination of preservatives and antioxidants in cosmetic samples. Recoveries from spiked samples ranged between 94.5?±?2.1% and 99.8?±?1.8%.

Open image in new window

Graphical abstract A stir foam was prepared from graphene oxide, poly(ethylene glycol) and natural latex (GO-PEG-NL) and is shown to be a most viable sorbent for the microextraction of trace amounts of preservative agents and antioxidants from cosmetic products.

     

Production of a new mucilage compound in Lepidium sativum callus by optimizing in vitro growth conditions

The mucilage in Lepidium sativum L. is considered a biologically active compound with diverse medicinal properties. Different explants (hypocotyls and leaf) were transferred to Murashige and Skoog (MS) medium supplemented with twelve different plant growth regulator combinations under two different incubations (light and dark). The best mucilage production from callus (36.76% g g^?1 dry weight) was obtained in the MS medium supplemented with 1 mg L^?1 of 2, 4-D and 2 mg L^?1 of BAP under the light condition. The mucilage produced by callus culture was nearly three times more than the mucilage yield of the seeds. The glucose, arabinose + mannose and galactose were 43.4 (mg g^?1 DW), 195.3 (mg g^?1 DW) and 86.2 (mg g^?1 DW) in the mucilage originated from seed, callus leaf and callus hypocotyl, respectively. The present study proposes an efficient method for producing large scales of mucilage with a favorable sugar aimed at food or pharmaceutical industries.     

Dispersive Liquid–Liquid Microextraction of Silver Prior to Determination by Microsample Introduction-Flame Atomic Absorption Spectrometry

Abstract

A new simple and sensitive method has been proposed for rapid determination of trace levels of silver in environmental water samples, using dispersive liquid–liquid microextraction (DLLME) prior to its microsample introduction-flame atomic absorption spectrometry. Under the optimum conditions, the linear range was 0.1–7 µg L^?1 and limit of detection was 0.018 µg L^?1. The relative standard deviation for 0.50 and 5.00 µg L^?1 of silver in water sample was 4.0 and 1.7%, respectively. The relative recoveries of silver from tap, well, river, and seawater samples at spiking levels of 1.00 and 5.00 µg L^?1 were in the range of 86.4–98.6%.     

Simultaneous CE Determination of Captopril and Indapamide in Pharmaceuticals and Human Plasma

Capillary electrophoresis with UV photo diode-array detection was utilized to adopt a new method for the assay of captopril and indapamide in pharmaceuticals and human plasma. Electrophoretic conditions controlling the analysis were optimized to develop separation, sensitivity and rapidity. The optimum conditions obtained were 100 mM borate at pH 9.0, injection time 10.0 s, voltage 25 kV and column temperature 25 °C with detection at 220 nm. Relatively, wide dynamic ranges for captopril (1–100 mg L^?1) and indapamide (0.1–40 mg L^?1) were obtained. Also, the method recorded acceptable intra- and inter-day accuracy (89.8–97.9%) and precision (0.77–3.50%) in pharmaceutical formulations and human plasma. The sensitivity of the method was developed by the optimization and the preconcentration conducted for human plasma sample using liquid–liquid extraction. The limit of detection gained (0.075 and 0.045 mg L^?1 for captopril and indapamide, respectively) reached the level of both drugs possibly found in human plasma. The method is suitable to be applied in pharmaceutical industries for quality control and in clinical laboratories for therapeutic drug monitoring purposes.     

Isolation of a Methylobacterium organophilium strain, and its application to a methanol biosensor

A methanol-utilizing strain (ME25) using methanol (MeOH) as the sole carbon source has been isolated from methane-generating pits. ME25 was identified as Methylobacterium organophilium by its physiological characteristics and 16SrDNA sequence. A MeOH biosensor was then developed by immobilizing ME25 along with sensor for dissolved oxygen (O₂). Its response is based on the depletion of O₂ following oxidation of MeOH by the bacteria. The decrease in O₂ is linearly related to the MeOH concentration in the range from 1.6 mg·L^?1 to 4800 mg·L^?1 and the detection limit for MeOH is 0.27 mg·L^?1. The response time of the biosensor is around 20 min.     

Determination of Vitamins A and E Exploiting Cloud Point Extraction and Micellar Liquid Chromatography

Cloud point extraction and micellar chromatographic methods were developed for determination of vitamins A and E. The stationary phase was C18 and the mobile phase was 3.00% (w/v) SDS, 15.0% (v/v) butyl alcohol and 0.02 mol L^?1 phosphate buffer solution at pH 7.0. The retention times for vitamins A and E were 9.6 and 13.0, respectively. The extraction solution was 100 mmol L^?1 Triton X-100, 650 mg NaCl and 1.0% ascorbic acid at 70°C for 30 min. The method is precise (r.s.d. < 7%), the linear range was from 5.0 up to 360.0 mg L^?1 for both vitamins. Recovery test showed recuperation between 90.2 and 99.2%, and LOD and LOQ of 0.234 and 0.108 mg L^?1, 0.780 and 0.360 mg L^?1 to vitamins A and E were found.     

Determination of nitrite in environmental waters by flow injection catalytic spectrophotometry

ABSTRACT

The flow injection catalytic spectrophotometry is proposed for the determination of nitrite based on the catalytic effect on the redox reaction between methylene blue and potassium bromate in acidic medium. The reaction is monitored spectrophotometrically by measuring the decrease in the absorbance of methylene blue at the maximum absorption wavelength of 664 nm. The method is characterised by low solvent consumption and easy automatic continuous analysis. It has higher sensitivity and lower detection limit. Experimental analysis conditions of the flow injection-catalytic photometry are optimised, and the best analysis conditions are: the concentration of the potassium bromate is 0.068 mol L^?1; the concentration of the phosphoric acid in oxidation liquid is 0.045 mol L^?1; the concentration of the methylene blue in colour-substrate solution is 2.4 mg L^?1, the volume of sample ring is 200 μL; the reaction coil is around 7 m in length; the inject time is 50 s and analysis time is 70 s. Under the optimal conditions, the linear range is from 10 to 500 μg L^?1 and the detection limit is 1 μg L^?1. The nitrate standard solution is continuously determined with a mass concentration of 300 μg L^?1. The RSD is determined to be 1.41% (n = 10). The nitrite in water samples, which were from the Half Acre pond, the Ink River and the Small West lake in a campus, was determined respectively by this method. A satisfactory standard addition recovery of 96.7%–103.9% was obtained.     

Temperature-assisted ionic liquid-based dispersive liquid–liquid microextraction with following back-extraction for HPLC/UV–Vis determination of 3-indole acetic acid in pea plants

In this work, the ionic liquid (IL)[C₆mim][PF₆] was used as IL-based extractant for dispersive liquid–liquid microextraction, followed by back-extraction and HPLC/UV–Vis determination of 3-indole acetic acid (IAA) in pea plant. The effects of some crucial factors such as chemical structure and volume of IL, pH adjustment, dissolution temperature, extraction time, centrifugation time, and ionic strength of aqueous sample were studied. The linear range of the HPLC method for IAA quantification was 17.5 × 10^?2–36.8 mg L^?1. LOD, LOQ, method recovery, and preconcentration factor values were 0.170 mg L^?1, 0.175 mg L^?1, 98.3, and 40 %, respectively. The RSD for the suggested method was calculated as 0.93 % at 35.04 mg L^?1 of IAA and each IL phase was able to be reused for at least four DLLME/back-extraction cycles. To evaluate the applicability of the suggested method, IAA was determined in pea plant samples.     

Trace Determination of Manganese in Urine by Graphite Furnace Atomic Absorption Spectrometry and Inductively Coupled Plasma–Mass Spectrometry

This paper describes a simple and sensitive method for the determination of manganese in human urine by graphite furnace atomic absorption spectroscopy (GFAAS), which includes sample preparation by microwave digestion. Matrix modifier combinations, the digestion power, pyrolysis, and atomization temperatures were optimized. A mixture of 5.0 µg Pd(NO₃)₂ and 3.2 µg Mg(NO₃)₂ modifier presented the best performance. The optimal temperatures for pyrolysis and atomization were 1500°C and 1950°C, respectively. The GFAAS method was compared to inductively coupled plasma–mass spectrometry (ICP–MS) for the determination of manganese in urine. Analytical figures of merit for GFAAS and ICP–MS were: accuracy (3.46%, 2.19%), precision (3.61%, 5.84%), LOD (0.109 µg · L^?1, 0.015 µg · L^?1), LOQ (0.327 µg · L^?1, 0.045 µg · L^?1), and recovery (80–100%, 74–89%). Both methods were employed for the determination of Mn in urine and the results were compared statistically.     

Determination of Puerarin in Pharmaceutical Injection by Flow Injection Analysis with Acidic Potassium Permanganate–Glyoxal Chemiluminescence Detection

Abstract

A simple flow injection chemiluminescence method with synergistic enhancement has been investigated for the rapid and sensitive determination of puerarin. The method is based on the enhancing effect of puerarin on the chemiluminescence emission generated by the oxidation of glyoxal with potassium permanganate in a sulfuric acid medium. The optimization of chemical variables influencing the chemiluminescence response of the method has been carried out by applying experimental design, using the proposed flow?injection manifold. Under the optimal conditions, the enhanced chemiluminescence intensity was linear with the concentration of puerarin over the range from 10.0 ng · ml^?1 to 7.0 µg · ml^?1 (R²=0.9972) with a detection limit (3σ) of 3.0 ng · ml^?1. At a flow rate of 3.0 ml · min^?1, a complete analytical process could be performed within 0.5 min, including sampling and washing, with a relative standard deviation of less than 3.0%. The proposed method was applied successfully in the assay of puerarin in pharmaceutical injection and human urine. The mechanism of chemiluminescence reaction was discussed briefly.