Spectrophotometric determination of nickel in biological samples using 1-azobenzene-3-(3-hydroxyl-2-pyridyl)-triazene

A new sensitive and selective chromogenic reagent, 1-azobenzene-3-(3-hydroxyl-2-pyridyl)-triazene (ABHPT), was synthesized. It has been found that ABHPT reacts with nickel(II) in a borax buffer solution (pH 10.0) to form 2: 1 red complexes with the maximum absorption at 530 nm. The apparent molar absorptivity of the complex is 2.6 × 10⁵ L/(mol cm). Most metal ions can be tolerated in considerable amounts, whereby only zinc and mercury may interfere with the determination of nickel(II). Nevertheless, this can be easily eliminated by prior separation with sulfhydryl dextran gel. A new method for the spectrophotometric determination of trace nickel(II) was developed. Beer’s law is obeyed for 0–15 μg of nickel(II) in 25 mL of solution. The limit of quantification, limit of detection, and relative standard deviation are 0.74 ng/mL, 0.25 ng/mL, and 1.0%, respectively. The method has been applied to the determination of trace nickel(II) in biological samples with satisfactory results. The text was submitted by the authors in English.     

Spectrophotometric determination of lead in traditional Chinese medicines with dibromo<Emphasis Type="Italic">p</Emphasis>-methyl-acethylsulfonazo

A new highly sensitive and selective chromogenic reagent dibromo-p-methyl-acethylsulfonazo (DBMASA) has been synthesized and purified. A method has been proposed for the spectrophotometric determination of lead with DBMASA in traditional Chinese medicines. The content of lead in the samples was low, so we used sulfhydryl cotton fiber (SCF) to separate and enrich trace Pb(II), which lead to a satisfactory result. In 0.25 M phosphoric acid medium, which greatly increased the selectivity, lead reacted with DBMASA to form a 1: 2 blue complex, having an intense absorption peak at 640 nm. Under the optimal conditions, Beer’s law is obeyed over the range 0.01–1.0 μg/mL of Pb(II) and the apparent molar absorptivity is 1.06 × 10⁵ L/mol cm. The detection limit and variation coefficient are found to be 2.1 ng/mL and 1.3%, respectively. The method has been applied to the determination of lead in traditional Chinese medicines with satisfactory results.     

Spectrophotometric Determination of Cadmium(II) Using p,p′‐Dinitro‐SYM‐Diphenylcarbazid in Aqueous Solutions

Abstract

A sensitive and selective spectrophotometric method is proposed for the rapid determination of cadmium(II) using, p,p′‐dinitro‐sym‐diphenylcarbazid, directly in aqueous solution. The reaction between cadmium(II) and p,p′‐dinitro‐sym‐diphenylcarbazid occurs immediately in strong basic media (0.02 N sodium hydroxide solution). The complex shows a maximum of absorption at 630–640 nm, and the absorbance remains stable for at least 24 h. The method allows the cadmium determination over the range 0.5–6.0 µg mL^?1, with a molar absortivity of 2.05×10⁴ L mol^?1 cm^?1 and features a detection limit of 0.13 ppm. The interferences caused by several ions [Ca(II), K(I), Ba(II), Al(III), Pb(II), Zn(II), Cl^?1, NO₃ ^?, SO₄ ^2?], which are present in most of environmental samples, were determined. The validation of the spectrophotometric method was done by recovery test of cadmium(II) in tap water and sea water. The results show that the proposed method has been successfully applied to the determination of cadmium(II) in water samples.     

Rapid spectrophotometric determination of iron in natural waters with 4-(2-thiazolylazo)-6-chlororesorcinol

4-(2-Thiazolylazo)-6-chlororesorcinol reacts sensitively with iron(II) to form a water-soluble brown complex which has a characteristic absorption at 741 nm. By utilizing this absorption, rapid and selective spectrophotometric determination of iron has been developed. The absorbance is constant at pH 8.7 to 10.9 and Beer's law holds up to 1.8 ppm of iron, with a molar absorptivity of 3.13 × 10⁴ liters mol^?1 cm^?1. Many types of ions are tolerable and the method has been applied successfully to the determination of iron in river waters.     

Simultaneuus Spectrophotometric Deermination of Phenazo-Pyridine and Nitrofurantoin in Tablets

Abstract

Two spectrophotometric methods are proposed for the simultaneous spectrophotometric determination of phenaaopyridine and nitrofurantoin in tablets. No preliminary separation step is required. The first method involves the use of the modified Vierardt equation as developed by Glenn. The second method is based on the spectral changes induced bg reduction using Zn/HCl; the absorption spectrum of nitrofurantoin completely disappears, Phenazopyridine on the other hand develops a new absorption spectra at 320 nm, the absorbance ratio of the peak at 380 nm to that at 320 nm could be adopted to develop a spectrophotometric method for the determination of both compounds in admixture. The suggested methods were applied to the determination of the two compounds in tablets, and the results obtained were accurate and precise.     

Extraction-Spectrophotometric or -Atomic Absorption Spectrophotometric Determination of Titanium Using Caffeic Acid and a Liquid Ion Exchanger

Abstract

A selective and sensitive method for the extraction followed by a spectrophotometric or atomic absorption spectrophotometric determination of titanium(IV) in trace amounts is described. The molar absorptivity of the caffeic acid-Aliquat 336 complex is 5.7 × 10⁴ l mol^?1 cm^?1 at 380 nm; the yellow coloured complex obeys Beer's law in the range 0.05–1.2 mg/l of titanium in the final extract. The method is applied to the preconcentration, separation and determination of titanium(IV) in steel, industrial effluents and environmental samples.     

Spectrophotometric Study of 1,2,7-Trihydroxyanthraquinone-Mg(II) Complex. Determination of Mg(II)

Abstract

The spectrophotometric study of violet complex Anthrapurpurin-Mg(II) in a basic medium and a hydroalcoholic solution was made (δ_max - 530 nm., ? = 3.5 × 10³ 1 mol^?1 cm^?1, stoichiometry 1:1, apparent constant of stability log K = 9. 26). A new method for the spectrophotometric determination of Mg(II) is proposed for concentrations between one and six ppm. Relative errors between replicate samples were 0.90 %.     

Determination of Manganese (II) in Foodstuffs by β-Cyclodextrin Polymer Phase Spectrophotometry with 1-(2-Pyridylazo)-2-naphthol

The chromogenic agent, 1-(2-pyridylazo)-2-naphthol (PAN) was included in g -Cyclodextrin polymer ( g -CDP) and the modified polymer of inclusion of PAN ( g -CDP-PAN) was obtained. Based on the fact that g -CDP-PAN can adsorb Mn (II) in solution to form Mn (II)-PAN complex, a sensitive and selective solid phase spectrophotometric method for the determination of trace amounts of Mn (II) has been developed. The maximum absorbance of Mn (II)-PAN complex in g -CDP was at 514 nm. The working range of the calibration graph was 2-12 w g of Mn (II). The interference of molybdenum, lead, cobalt, chromium, iron, nickel, zinc, tin, cadmium, and copper that form colored species with PAN in the polymer phase was investigated. The method was applied to the determination of Mn (II) in black rice and tea samples. A new method for the determination of trace amounts of manganese by polymer phase spectrophotometry is described. Manganese reacted with 1-(2-pyridylazo)-2-naphthol (PAN) that was included in a g -cyclodextrin polymer. The absorbance of the colored polymer, packed into a 5 mm quartz cell, was determined directly at 514 nm. The proposed method was applied to the determination of manganese in black rice and tea samples.     

Catalytic Spectrophotometric Determination of an Ultra-Trace Amount of Lead by Reduction of Resazurin by Sodium Sulfide

Abstract

A Kinetic spectrophotometric method for the determination of ultra-trace amounts of lead(II) is described. This method is based on the catalytic action of this ion on the reduction of resazurin by sulfide. The course of the chemical reaction is followed spectrophotometrically by the measurement of reduction in absorbance of resazurin at 605 nm. The calibration range of Pb(II) is dependent on the sulfide concentration.

With this method 1 ng m1^?1 lead can be detected. The method is used for determination of Pb(II) in KNO₃ (Fluka) and in water.     

Spectrophotometric Determination of Cystine with O-Phthalaldehyde in the Absence of Thiol

Abstract

A spectrophotometric method for the determination of cystine with o-phthalaldehyde (OPA) in the absence of thiol is described. When cystine is heated at 60[ddot]C for 30 min in a low excess of OPA (pH 9.5), a very stable derivative with 1:2 stoichiometry (cystine:OPA) and an absorption maximum at 335 nm (E = 4600) is formed. At pH < 1 the derivative is protonated (protonation constants: log K¹ = 5.88 and log K² = 3.70 at I = 0.1 and 20[ddot]C) and another absorption band at 440 nm (E = 3800) appears, which allows the determination of cystine in the presence of other amino acids.     

The simultaneous spectrophotometric determination of nickel and cobalt in mixtures with 3-hydroxypicolinealdehyde azine

The properties of the nickel complex of 3-hydroxypicolinealdehyde azine are described (λ_max = 480 nm, ? = 4.2· 10⁴ l mol^-1 cm^-1). The optimal conditions for a selective and sensitive spectrophotometric determination of nickel are discussed. The absorption spectra of the nickel and cobalt (II) complexes of 3-hydroxypicolinealdehyde azine are sufficiently different to permit the simultaneous spectrophotometric determination of both ions when the absorbances are measured at 480 nm and 540 nm. Mixtures containing nickel and cobalt in ratios from 0.1 to 10 can be analysed. The method has been applied to process catalysts on alumina supports.     

Spectrophotometric and First Derivative Spectrophotometric Determination of Magnesium with 1-Hydroxy-2-Carboxyanthraquinone

Abstract

1-Hydroxy-2-carboxyanthraquinone reacts with magnesium in ethanol-water mixtures to form a red complex having an absorption maximum at 490 nm in alkaline medium. A detailed study of the characteristics of this complex has been carried out and a spectrophotometric method for the determination of magnesium at the 0.4–4.0 μg ml^?1 level is proposed. The method has been sensitized by employing first derivative spectrophotometry. By the use of the derivative approach magnesium can be determined between 0.08–0.40 μg ml^?1. Statistical analysis of the results is also described.     

Indirect Microdetermination of Hydroxide Ions by Atomic Absorption Spectrophotometry

Abstract

A simple indirect atomic absorption spectrophotometric method is described for the determination of hydroxide ions. The method is based on the reduction of silver ions which takes place when hydroxide sample is treated with silver (I) solution in presence of manganese(II) ions. The unconsumed silver is determined by atomic absorption spectrophotometry. The effects of a number of factors have been studied and the method was employed for the determination of free alkali in paper samples.     

Ternary Complex Nickel(II)/3-(4′,5′-Dimethyl-2′-Thiazolylazo)-2,6-Dihydroxybenzoic Acid/Cyanide. Spectrophotometric Determination of Nickel

Abstract

A spectrophotometric method for nickel has been developed based on the formation of a ternary complex in the system Ni(II)/3-(4′,5′-dimethyl-2′-thiazolylazo)-2,6-dihydroxybenzoic acid/cyanide at pH 9.2 (borate buffer), which allows the determination of 0.05–0.47ppm of nickel (ε = 3.53×10⁴ 1.mol^?1. cm^?1) at 538nm. Interferences have been studied and the method applied to the determination of nickel in low alloy steels.     

Benzothiazole-2-aldehyde-2-quinolylhydrazone as a reagent for the extractive spectrophotometric determination of copper (II)

Benzothiazole-2-aldehyde-2-quinolylhydrazone (BTAQH) was used for the spectrophotometric determination of trace amounts of copper(II) after the extraction process. Copper(II) reacts with BTAQH at pH 8.3–12.6 to form a water-insoluble 1:2 complex, which can be extracted with many kinds of organic solvent. The extracted species with benzene has an absorption maximum at 523 nm and obeyed Beer's law over the range 0.09 to 0.75 ppm of copper. The molar absorptivity is 7.50 × 10⁴M^?1 cm^?1 at 523 nm. The spectral properties of the copper(II) complexes with some tridentate hydrazones containing benzothiazole ring as a functional group were also discussed.     

Spectrophotometric Determination of Manganese with 4(5)-Imidazolealdoxime (Imalox)

Abstract

A method is described for the spectrophotometric determination of manganese by means of its complex with 4(5)-imidazolealdoxime, IMALOX, formed in alkaline medium. The colour system has its absorption maximum at 350 nm and obeys Beer's law over the range 0.8–8.0 μg of Mn per ml. The optimum range is 1–5 μg m^?1. The molar absorptivity is 7850 1 mol^?1 cm^?1. Relatively few ions interfere, and these can be masked with cyanide, tartrate and NTA. The experimental results have been critically analyzed and a comparison with the main spectrophotometric reagents for manganese is presented.     

Indirect Determination of the Pesticide Malathion by Atomic Absorption Spectrophotometry

Abstract

A method for the indirect determination of the pesticide malathion by atomic absorption spectrophotometry (AAS) is proposed and compared with the standard spectrophotometric method.

A study of the influence of the different variables on the hydrolysis and extraction is carried out in order to obtain the best experimental conditions.

The proposed method offers clear advantages over the standard procedure because of the instability of the Cu (II) complex formed. Both methods are applied to the determination of malathion in two commercial formulations.     

Spectrophotometric studies on complexation reactions of some water-soluble 5-nitro-2-pyridylhydrazones with cobalt. Spectrophotometric and derivative spectrophotometric determination of trace cobalt with 2-benzimidazolyl-3-sulphophenylmethanone 5-nitro-2-pyridylhydrazone

The complexation reactions of four water-soluble hydrazones, 2-quinolyl-3-sulphophenylmethanone 5-nitro-2-pyridylhydrazone, 3-sulphophenyl-2-thiazolylmethanone 5-nitro-2-pyridylhydrazone (STNPH), 2-benzothiazolyl-3-sulphophenylmethanone 5-nitro-2-pyridylhydrazone and 2-benzimidazolyl-3-sulphophenylmethanone 5-nitro-2-pyridylhydrazone (BISNPH), with cobalt(II) were studied spectrophotometrically. These hydrazones react with cobalt(II) to form stable 1:2 (metal:ligand) complexes, except for STNPH, which forms a 1:1 complex, with high molar absorptivities. A sensitive and selective spectrophotometric method for the determination of cobalt with BISNPH has been developed. The cobalt(II)-BISNPH complex is formed quantitatively in the pH range 2.7–9.4 and oxidized rapidly to give the corresponding cobalt(III) complex with an absorption maximum at 517 nm. Beer's law is obeyed over the range 0.02–1.0 μg ml^?1 and the apparent molar absorptivity of the cobalt(III) complex is 6.65 × 10⁴ l mol^?1 cm^?1 at 517 nm. The method was applied to the determination of cobalt in iron and steel samples with satisfactory results. The sensitivity is increased 11-fold by use of second-derivative spectrophotometry.     

New Spectrophotometric Method for the Determination of Titanium in Soil and Standard Geochemical Samples

Abstract

In the present communication a simple and rapid spectrophotometric method for the determination of titanium is described. The method is based on the reaction of Ti(IV) with a newly synthesized reagent, 6-(4-nitrophenylazo)-3,4,5-trihydroxy benzoic acid (NATHB), in ethanol medium at pH 3.2 to 4.2. The complex exhibits an absorption maximum at 495 nm and Beer's law is valid over the range of 0.04 – 1.00 μg.ml^?1 Ti. The molar absorptivity is 3.48 × 10⁴ dm³.mole^?1. cm^?1. Most of the foreign metal ions and anions do not produce any colorations with NATHB at selected conditions. Based on these results, a simple and direct spectrophotometric method with high selectivity and sensitivity was proposed. The method has been successfully applied for the determination of titanium in 5 soil and 3 standard geochemical samples.     

Cyclohexane-1, 3-Dione bis (4-Methylthiosemicarbazone) as a Spectrophotometric Reagent for the Determination of Zn (II)

Abstract

The spectrophotometric study of reddish cyclohexane-1, 3-dione bis (4-methylthiosemicarbazone)-Zn(II) was made in dimethylformamide-water solution (λ_max= 475 nm, ∑ = 3.3×10⁴ 1.mole^?1. cm^?1. Sandell sensitivity = 2×10^?2 μg Zn(II).cm^?2, stoichiometry 1:1, and apparent stability constant 6.1×10⁴). A new method for the spectrophotometric determination of Zn(II) is proposed for concentrations between 0.1 and 2.5 ppm. The relative error (95% confidence level) is 0.7% for 1.0 pprn of Zn(II).

The extraction with ethylacetate of the reddish complex was also studied spectrophotometrically (λ_max = 493 nm, ∑ in organic phase = 4.8×10⁴ 1.mole^?1.cm. Sandell sensitivity = 3.4×10^?4 μg Zn(II).cm^?2, stoichiometry 1:1, apparent extraction constant 1.4×10⁴). A new method for the extraction-spectrophotometric determination of Zn(II) is proposed for concentrations, in aqueous phase, between 0.02 and 0.30 ppm. The relative error (95% confidence level) is 1.0% for 0.15 pprn of Zn(II).