Molecular Imprinting-Chemiluminescence Sensor for the Determination of Amoxicillin

The amoxicillin-imprinted polymer was synthesized with methacrylic acid (MAA) as a functional monomer and ethylene glycol dimethacrylate (EGDMA) as a cross-linker. The binding characteristic of the imprinted polymer to amoxicillin was evaluated by equilibrium binding experiments. Using the imprinted polymer as recognition material, 3-(3′-nitrophenyl)-5(2′-sulfonylphenylazo)-rhodanine (4NRASP) was synthesized by the authors and was used as chemiluminescence (CL) reagent. A novel chemiluminescence (CL) sensor for the determination of amoxicillin was developed based on the CL reaction of amoxicillin with potassium permanganate in an acidic medium. The sensor displayed excellent selectivity and high sensitivity. The linear response range of the sensor was from 5.0 × 10^?9 to 1.0 × 10^?6 g · mL^?1 (r = 0.9985) and the detection limit was 1.3 × 10^?9 g · mL^?1. The relative standard deviation for the determination of 1.0 × 10^?7 g · mL^?1 amoxicillin solution was 1.7% (n = 11). The sensor was applied to the determination of amoxicillin in urine samples with satisfactory results.     

Molecular Imprinting-Chemiluminescence Determination of Norfloxacin Using a Norfloxacin-Imprinted Polymer as the Recognition Material

A selective molecular imprinting-chemiluminescence method was developed for the determination of norfloxacin by using a norfloxacin-imprinted polymer as recognition material and the Ce(IV)-sodium sulfite-norfloxacin chemiluminescence reaction as the detection system. The chemiluminescence intensity responded linearly to the concentration of norfloxacin within 1.0×10^–71.0×10^–5molL^–1 with a detection limit of 3×10^–8molL^–1. The relative standard deviation for 5.0×10^–7molL^–1 norfloxacin solution was 2.4% (n = 7). This method was applied to the determination of norfloxacin in urine samples, and the results obtained were satisfactory.     

分子印迹电化学传感器测定L-色氨酸的研究

报道了一种由溶胶-凝胶法制备的分子印迹电化学传感器,并用于L-色氨酸的测定.印迹聚合物是由四乙氧基硅烷、甲基三甲氧基硅烷、苯基三甲氧基硅烷等聚合而成,L-色氨酸为模板分子.通过循环伏安法验证了印迹膜与模板分子的结合和去除.该传感器对L-色氨酸具有良好的选择性以及高的灵敏度,线性范围为1.0×10-9～1.0×10-5m...     

分子印迹荧光传感器的研制及其对呋喃妥因的特异性识别

采用柠檬酸作为碳源合成了荧光碳量子点(CDs),经硅烷化试剂改性后,以呋喃妥因为模板分子,在其表面合成了分子印迹聚合物(MIP-CDs)。以傅立叶变换红外光谱仪(FTIR)和扫描电镜(SEM)对合成产物进行结构和形貌表征;通过一系列吸附实验研究了MIP-CDs对呋喃妥因的识别性能。实验结果表明:在最佳吸附条件下,MIP-CDs的荧光猝灭程度与呋喃妥因的浓度符合Stern-Volmer方程,呋喃妥因在0~10mg/L质量浓度范围内具有良好的线性关系(r2=0.991 4),方法检出限(S/N=3)为2μg/L。在水样和饲料样品中添加不同浓度的呋喃妥因,加标回收率为78.0%~95.2%,相对标准偏差(RSD)不大于6.4%,符合分析方法学要求。该方法简单、快速、选择性好,可直接用于水体和饲料中痕量呋喃妥因的监测。     

水杨酸分子印迹膜电化学传感器的制备

以水杨酸为模板分子,采用循环伏安法电聚合形成聚吡咯膜,以固定电位过氧化法去除印迹分子,制备了水杨酸分子印迹膜电极.本印迹电极能促进水杨酸电氧化过程,有效地避免结构类似物(如苯甲酸)对其测定的干扰.循环伏安法用于电化学检测,当富集时间为10 min,磷酸盐缓冲溶液的pH=6.86 时,在1.0×10-6～2.0×10-3 mol/L浓度范围内,水杨酸氧化峰电流与其浓度呈良好的线性关系,检出限为0.8 μmol/L, 用分子印迹膜电极对加标样品进行分析,回收率为94.6%～103.4%.     

离子印迹荧光传感器选择性检测镉离子

该文运用离子印迹技术,结合表面修饰方法以2-萘基丙烯酸酯为荧光配体,聚偏氟乙烯(PVDF)膜为支撑介质,在二甲基亚砜中于65℃下热引发聚合得到镉离子荧光印迹传感器.该荧光印迹传感器在中性条件下对镉离子表现出良好的选择性和抗干扰能力,检出限为5.5×10-7mol/L,与ICP - MS法无显著性差异.循环使用10次的相...     

Novel Potentiometric Sensor Based on Molecular Imprinted Polyacrylamide for the Determination of Shikimic Acid in Herbal Medicine

ABSTRACT

A novel potentiometric sensor based on a molecular imprinted polymer was developed for the determination of shikimic acid in herbal medicine. The imprinted polymer was synthesized via bulk polymerization of the functional monomer in the presence of trimethylolpropane triacrylate as the cross-linker with 2,2′-azo-bisisobutyronitrile as the initiator and shikimic acid as the template. The sensing membrane was constructed by the inclusion of imprinted polymer in the polyvinyl chloride matrix. The effect of the identity of the imprinted polymer on the potentiometric response was observed. The optimal imprinted polyacrylamide was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The performance of the imprinted membrane based sensor, including the effects of pH, response time and selectivity coefficient, was investigated. The imprinted sensor exhibited a fast near-Nernstian response in the concentration range of 1?×?10^?5 to 1?×?10^?1?mol/L with a detection limit of 9?×?10^?6?mol/L. The analytical performance of the sensor supported the direct determination of shikimic acid in herbs, and the obtained results were validated by ultraviolet-visible absorption spectrophotometry. Advantages of the potentiometric sensor include enhanced sensitivity, high selectivity, long-term stability and low-cost fabrication, suggesting the device offers promise for the analysis of Chinese herbal medicine.     

L-苏氨酸分子印迹传感器的制备及应用

采用电化学方法制备了纳米银/聚槲皮素修饰充蜡石墨电极(Ag/Qu/WGE)。以L-苏氨酸(L-Thr)为模板分子,将一定量的壳聚糖,L-Thr和Nafion的混合液涂布在Ag/Qu/WGE上,采用恒电位法电化学清洗除去模板分子L-Thr,得到基于壳聚糖/纳米银/聚槲皮素的L-Thr分子印迹复合膜修饰电极(TMIP/WGE)。采用场发射扫描电镜、红外光谱分析、X射线光电子能谱和电化学技术表征了TMIP/WGE的形成。TMIP/WGE对L-Thr具有良好的电催化氧化作用,可用于L-Thr的快速、灵敏检测,L-Thr的氧化峰电流(1.45 V)和其浓度在0.1~1.0μmol/L范围内呈良好的线性关系,检出限(3σ)为0.01μmol/L。该电极已成功用于苏氨酸发酵液中L-Thr的检测。     

分子印迹电位型传感器快速检测猪尿液中的克伦特罗

以盐酸克伦特罗为模板分子,采用沉淀聚合法合成了克伦特罗的分子印迹聚合物,并以其为离子载体,制得分子印迹聚合物膜克伦特罗离子选择性电极。在最优实验条件下,电极对克伦特罗阳离子的检出限可达7.0×10-8mol/L,线性范围为1.0×10-7～1.0×10-4mol/L,能斯特斜率为55.7 mV/decade。此电极具有优越的选择性、快速的响应时间以及良好的稳定性;已成功应用于实际猪尿样品中克伦特罗的测定,加标回收率为98%～107%,检测时间小于3 min。     

利用分子印迹传感器选择性测定绿麦隆

以绿麦隆为模板分子,邻氨基酚为功能单体,在金电极表面电聚合制得具有特异性识别孔穴的绿麦隆分子印迹膜。采用循环伏安、差分脉冲伏安法研究了印迹膜的性能、结构、分子印迹效应和模板分析物,并比较了传感器对其它结构相似化合物的选择性响应,发现该传感器对绿麦隆检测具有良好的选择性。绿麦隆浓度在3.0×10-7~1.5×10-6mol/L范围内与峰电流呈线性关系,检出限为1.0×10-7mol/L,在干扰物质共存情况下的回收率为105%~116%。     

分子印迹化学发光传感器在线检测牛肉与鸡肉组织中残留的磺胺嘧啶

以分子印迹作为识别体,制成高灵敏度和高选择性的化学发光传感器在线检测牛肉与鸡肉组织中残留的磺胺嘧啶。磺胺嘧啶作为靶分子,通过悬浮聚合制备了1～10μm的分子印迹聚合物。将分子印迹聚合物装入聚四氟乙烯管中,作为固相萃取柱,并联在八通阀上,用于在线选择吸附磺胺嘧啶。在最佳条件下,测得磺胺嘧啶线性范围7.0×10–9～9.0×10–7g/mL,方法的检出限为(3σ)2×10–10g/mL,11次平行测定3.0×10–8g/mL的磺胺嘧啶溶液的化学发光强度相对标准偏差为3.4%。方法能够用于检测肉类产品中残留的磺胺嘧啶。     

盐酸金霉素分子印迹电化学传感器的研制

构建了一种选择性检测盐酸金霉素(CTC)的分子印迹电化学传感器。在NaClO4溶液中,以邻氨基酚(OAP)为功能单体,盐酸金霉素(CTC)为模板,通过循环伏安法在玻碳电极表面上聚合制备了CTC印迹敏感膜(MIPs)。在含0.005 mol/L K3[Fe(CN)6]及0.1 mol/L KCl的磷酸盐缓冲液(PBS)中,应用差分脉冲伏安法(DPV)研究了传感器的响应性能。DPV峰电流差与CTC浓度在2.0×10!8~6.1×10!7mol/L范围内呈线性关系,检出限为1.5×10!8mol/L(3σ)。实验表明,用甲醇/H2SO4混合洗脱溶液可以使传感器再生,对CTC的测定具有良好的重现性,并具有良好的储存稳定性。传感器对于干扰物氯霉素及青霉素没有响应,结构相似的四环素、土霉素有微弱的响应,显示了良好的选择性。在牛奶和鸡肉实际样品中所测得的CTC加标回收率为86.4%~96.9%。与文献报道的CTC检测方法相比,本传感器具有低的检测限,操作简便,整个过程无需衍生化处理,响应快,成本低。     

基于电化学聚合技术的分子印迹化学传感器研究进展

作为传感器中最重要的研究方向之一,分子印迹传感器在近十年的发展中取得了巨大进展。分子印迹聚合物膜在转换器表面的固定化方法有涂膜法、原位引发聚合法和电化学聚合法等,其中电聚合法因具有制备简单快速、膜厚可控、膜与电极附着紧密、重现性好等优点而成为极具潜力的制备方法。该文评述了基于电化学聚合技术的分子印迹传感器的主要研究进展,对聚合膜制备过程中单体的选择和模板的去除进行了讨论,对电聚合制备的印迹传感器在传感领域的分析应用进行了总结,并在此基础上对其未来发展进行了展望。     

Fluorescence Probe Enhanced Spectrofluorimetric Method for the Determination of Prulifloxacin in Pharmaceutical Formulations and Biological Fluids

Abstract

Spectrofluorimetry for the determination of prulifloxacin (PUFX) was developed based on the strong fluorescence of PUFX after adding fluorescence probe yttrium in buffer solution (pH = 6.80), and various factors of influencing fluorescence have been researched. Under the optimum conditions, the liner range was 2.0 × 10^?8 to 9.1 × 10^?6 mol L^?1 and the detection limit was 8.5 × 10^?9 mol L^?1. The relative standard deviation was 2.1% for 11 measurements of 5.0 × 10^?7 mol L^?1 PUFX standard solution. The mechanism of the sensitizing effect of probe was discussed. The method was applied for the determination of PUFX in actual sample; the result obtained was satisfactory.     

Flow Injection Chemiluminescence Sensor with Novel Rhodanine Ramification for Determination of Fenfluramine Based on Molecularly Imprinted Polymer

Abstract

Flow injection chemiluminescence (FI-CL) with molecularly imprinted polymer (MIP) was applied to determine fenfluramine. The fenfluramine-imprinted polymer was prepared with acrylamide (AM) as functional monomer and ethylene glycol dimethacrylate (EGDMA) as cross-linker. Methyl and sulfonic group were introduced to rhodanine matrix, and a novel rhodanine ramification 3MORASP was synthesized by the author, and it was used as chemiluminescence reagent. 3-(3′-Methoxyphenyl)-5(2′-sulfonylphenylazo)-rhodanine (3MORASP), first synthesized by the authors, was used as chemiluminescence (CL) reagent. The novel flow path of FI-CL was designed, which made three merged streams of reactants injected into MIP column move through different pathways simultaneously. Fenfluramine was detected based on the reaction of fenfluramine, 3MORASP, and potassium permanganate in an acidic medium. The CL intensity was correlated linearly with the concentration of fenfluramine over the range of 1.0 × 10^?7 to 5.0 × 10^?6 g · mL^?1, and the detection limit was 9.48 × 10^?9 g · mL^?1. The relative standard deviation (RSD) was 2.4% for determination of 1.0 × 10^?6 g · mL^?1 fenfluramine (n = 11). This method was successfully applied to the determination of fenfluramine in weight-reducing tonic.     

非那西丁的分子印迹-化学发光分析法研究

本研究发现高锰酸钾可以氧化非那西丁产生弱的化学发光, 而甲醛对这一化学发光反应有较强的增敏作用, 据此建立了高锰酸钾-非那西丁-甲醛化学发光体系. 以甲基丙烯酸为功能单体, 乙二醇二乙酸甲酯为交联剂, 合成了非那西丁的分子印迹聚合物. 以此分子印迹聚合物为分子识别物质, 利用高锰酸钾-非那西丁-甲醛化学发光体系, 结合流动注射分析技术, 建立了测定非那西丁高选择性的分子印迹-化学发光分析方法. 方法的线性范围为 5.0×10-7～5.0×10-5 g/mL, 相关系数为 r=0.990, 检出限为 2×10-7 g/mL. 对 1.0×10-6 g/mL 非那西丁溶液进行 11 次平行测定,相对标准偏差为 2.8%. 此法已用于复方制剂去痛片及尿液中非那西丁的测定, 结果令人满意.     

Micro flow sensor on a chip for the determination of terbutaline in human serum based on chemiluminescence and a molecularly imprinted polymer

Based on a molecularly imprinted polymer (MIP) as the recognition element, a novel chemiluminescence (CL) micro flow sensor on a chip for the determination of terbutaline in human serum is described. The MIP was prepared by using terbutaline as the template, methacrylic acid (MAA) as the functional monomer, ethylene glycol dimethacrylate (EGDMA) as the cross-linking monomer, and acetonitrile as the solvent. The chip was fabricated from two 50 mm × 40 mm × 5 mm transparent poly (methylmethacrylate) (PMMA) slices. The microchannels on the chip etched by CO₂ laser were 200 μm wide and 150 μm deep. The microsensor cell filled with 2 mg MIP for selectively on line adsorbing terbutaline was 10 mm long, 1 mm wide, and 0.5 mm deep. All reagents were controlled by the syringe pump with an accurate timer. The on line adsorbed terbutaline by the MIP can enhance the CL intensity of the reaction of luminol with ferricyanide. The enhanced CL intensity is linear with terbutaline concentration from 8.0 to 100 ng/mL with a detection limit of 4.0 ng/mL (3σ). The micro flow sensor provides for good reproducibility with the relative standard deviation of 3.6% (n = 7) for 20 ng/mL terbutaline.     

Molecularly Imprinted Impedimetric Sensor for Determination of Mycotoxin Zearalenone

The mycotoxin zearalenone (ZEA) prompts reproductive toxicity due to its strong estrogenic effects. In this work, an electrochemical sensor for determination of ZEA was developed by electropolymerization of a molecularly imprinted poly (o‐phenylenediamine) (PPD) film on screen‐printed gold electrode (SPGE) surface. The sensor was examined by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) using K₃[Fe(CN)₆]/K₄[Fe(CN)₆] as redox probe. The molecularly imprinted polymer (MIP) sensor showed a wide determination range from 2.50 to 200.00 ngmL^?1 for ZEA. The Limit of detection (LOD) was calculated to be 0.20 ngmL^?1, based on the signal to noise (S/N) ratio equal to 3.0. The sensor displayed good repeatability, with RSD values≤4.6 %, and maintained 93.2 % of its initial response after storage for 10 days in air at room temperature. The developed method was successfully applied for the determination of ZEA in corn flakes with mean recoveries ranged from 96.2 % to 103.8 % and RSDs within the interval of 2.1 % to 3.8 %.     

基于分子印迹识别的化学发光微流控传感器芯片测定双嘧达莫

试验中,以双嘧达莫为模板分子,α-甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,氯仿为溶剂,合成了双嘧达莫分子印迹聚合物。将此聚合物填充在长8 mm,宽1 mm,深0.5 mm的微流控芯片检测池中作为分子识别物质,设计了一种新型的化学发光微流控传感器芯片测定双嘧达莫。双嘧达莫被此聚合物在线吸附并识别,被吸附的双嘧达莫与鲁米诺和铁氰化钾混合溶液反应并导致其化学发光强度增大。该传感器对双嘧达莫响应范围为1.0～20μg·L~(-1),检出限(3σ)为0.5μg·L~(-1),对10μg·L~(-1)双嘧达莫连续平行测定7次,其相对标准偏差为4.6%。     

氯丙嗪分子印迹化学发光微流控传感器芯片的研究

以氯丙嗪分子印迹聚合物为识别物质,以鲁米诺-K3Fe(CN)6化学发光体系,建立了一种新型的氯丙嗪化学发光微流控分子印迹传感器芯片的检测方法。利用二氧化碳激光在聚甲基丙烯酸甲酯材质上刻蚀出200μm宽,150μm深的微通道,8 mm长,1 mm宽,0.5 mm深的微检测池。微检测池中填充50μm粒径大小的热聚合得到的氯丙嗪分子印迹聚合物作为识别物质,在线富集氯丙嗪,富集的氯丙嗪可以增强鲁米诺和K3Fe(CN)6的化学发光强度,以化学发光强度定量氯丙嗪量。该传感器的响应值与0.02~0.4μg/mL氯丙嗪呈良好的线性关系,检出限为8 ng/mL(3σ)。该微流控传感器芯片已用于测定人尿液中的氯丙嗪。