Mechanism of the oscillating chemiluminescence reaction in the luminol-H2O2-KSCN-CuSO4-NaOH system

We conducted a simultaneous measurement of the potential of Cu²⁺, oxidation-reduction potential (ORP), and the chemiluminescence intensity in the luminol-H₂O₂-KSCN-CuSO₄-NaOH system. Two types of chemiluminescence were identified: a very faint continuous chemiluminescence and a strong oscillating chemiluminescence. The correlation between the potential of Cu²⁺ and ORP was measured experimentally for the first time. The effect of the initial concentrations of Cu²⁺ and H₂O₂ on the overall chemiluminescence intensity and the oscillation frequency was investigated in detail. Time-dependent concentration variation of the chemical species existing in the reaction system was calculated using a Runge-Kutta method. Two elementary chemical reactions not considered previously were taken into consideration. The overall experimental behavior was well explainable with our simulation. Based upon the comparison of our simulation with the experiment, we proposed that the strong oscillating chemiluminescence was induced by the reaction of luminol with ·OS(O)CN.     

Chemiluminescence parameters of peroxynitrous acid in the presence of short-chain alcohols and Ru(bpy)<Stack><Subscript>3</Subscript><Superscript>2+</Superscript></Stack>

The chemiluminescence behaviour and mechanism of peroxynitrous acid and Ru(bpy)₃²⁺ were studied in the presence of short-chain alcohols (methanol, ethanol, propan-1-ol, propan-2-ol, butanol, 2-methylpropan-1-ol, pentanol). It was found that the chemiluminescence intensity of peroxynitrous acid and Ru(bpy)₃²⁺ system could be significantly enhanced by these seven short-chain alcohols. The maximum chemiluminescence wavelength of 608 nm of [Ru(bpy)₃²⁺]* in the excited state was attributed to the reaction between Ru(bpy)₃²⁺ and dihydroxyalkyl radicals which were generated during the redox course of peroxynitrous acid and alcohols. In addition, the chemiluminescence signals of the system presented depended largely on the solubility and branched-chain structure as well as the length of carbon chain. The analytical characteristics and parameters of the peroxynitrous acid/Ru(bpy)₃²⁺/alcohols chemiluminescence system were investigated under optimum conditions.     

Rapid Flow-Injection Method for the Determination of Colistin by Sensitized Chemiluminescence Using the Acidic Permanganate–Sulfite System

Abstract

A simple, rapid, and sensitive chemiluminescence method for the determination of colistin (Polymyxin E), a cyclic polypeptide with antibiotic effect produced by certain strains of Bacillus polymyxa, has been developed by combining a flow-injection technique and the bacteria's sensitizing effect on the chemiluminescence reaction between sulfite and acidic permanganate. The optimum conditions for chemiluminescence emission were established. The chemiluminescence was proportional to the log of concentration of colistin over the range 4–100 µg mL^?1 (3.5–87 µM). The detection limit was 1.2 µg mL^?1 (1.0 µM) of colistin. The method has been satisfactorily used for the determination of colistin in pharmaceuticals.     

Quenching effect of some heavy metal ions on the fast peroxyoxalate-chemiluminescence of 1-(dansylamidopropyl)-1-aza-4,7,10-trithiacyclododecane as a novel fluorophore

The fast chemiluminescence (CL) arising from the reaction of bis(2,4,6-trichlorophenyl)oxalate (TCPO) with hydrogen peroxide in the presence of 1-(dansylamidopropyl)-1-aza-4,7,10-trithiacyclododecane (L) as a novel fluorophore, and imidazole as catalyst, has been studied in ethyl acetate solution. The relationships between the chemiluminescence intensity and concentrations of TCPO, imidazole, hydrogen peroxide and L are reported. In the presence of imidazole as catalyst, the entire CL signal was completed in less than 3 s. The quenching effect of Cu²⁺, Pb²⁺, Cd²⁺, Hg²⁺ and Ag⁺ ions on the chemiluminescent system was investigated, the resulting Stern–Volmer plots were obtained and the K_Q values were calculated. It was found that the quenching effect of metal ions on the chemiluminescence of L decreases in the order Cu²⁺ > Pb²⁺ > Cd²⁺ > Hg²⁺ > Ag⁺.     

Electrogenerated Chemiluminescence Determination of Dopamine and Epinephrine in the Presence of Ascorbic Acid at Carbon Nanotube/Nafion‐Ru(bpy)$\rm{ {_{3}^{2+}}}$ Composite Film Modified Glassy Carbon Electrode

Based on the inhibition effect of dopamine and epinephrine on Ru(bpy) ‐tripropylamine electrogenerated chemiluminescence system, the excellent properties of carbon nanotube, and the cation permselectivity of Nafion film, an electrogenerated chemiluminescence inhibition method for determination of dopamine and epinephrine in the presence of ascorbic acid at carbon nanotube/Nafion‐Ru(bpy) composite film modified glassy carbon electrode was described. The results showed that the proposed method was sensitive and selective for the determination of dopamine and epinephine. The linear calibration range was from 1.6×10^?9 M to 3.2×10^?5 M and 5×10^?8 M to 6×10^?5 M for dopamine and epinephrine, respectively. 200‐fold excess of ascorbic acid did not interfere with the determination of 1 μM dopamine and epinephrine.     

Rapid determination of levofloxacin in pharmaceuticals and biological fluids using a new chemiluminescence system

A novel chemiluminescence method for the determination of levofloxacin is presented, which is based on the inhibitory effect of levofloxacin on the chemiluminescence reaction between luminol and myoglobin in a flow-injection system. The decrement of chemiluminescence intensity is linear with the logarithm of levofloxacin concentration over the range from 0.07 to 100.0 ng/mL (r ² = 0.9994), with the detection limit of 0.02 ng/mL (3σ). At a flow rate of 2.0 mL/min, a complete analytical process could be performed within 0.5 min, including sampling and washing, with a relative standard deviation of less than 3.0% (n = 5). The proposed procedure was applied successfully to the determination of levofloxacin in pharmaceutical preparations, human urine and serum without any pretreatment procedure.     

Chemiluminescence method for the determination of mitoxantrone by the enhancement of the tris-(4,7-diphenyl-1,10-phenanthrolinedisulfonic acid)ruthenium(II)–cerium(IV) system

2,5-Dimercapto-1,3,4-thiadiazole (DMTD) self-assembled monolayer on gold electrode was prepared and investigated by electrochemical measurement. The DMTD/Au electrode exhibited a significantly increased sensitivity and selectivity for Pb(II) in acetate buffer (pH 5.5) at a potential of −1.0 V (vs Ag/AgCl) for 4 min by anodic stripping voltammetry. The influence of various experimental parameters on the voltammetric response was studied. Under the optimized working conditions, the dependence of the stripping peak current response on concentration of Pb(II) was linear in the range of 1–45 μmol L⁻¹ with a correlation coefficient of 0.9988, and the detection limit was 0.10 μmol L⁻¹. The relative standard deviation of the results was 3.4% for six successive determinations of a 20 μmol L⁻¹ Pb(II) solution. A study of interfering substances was also performed. The method was applied to the determination of Pb(II) in water samples with satisfactory results. Correspondence: Hong Qun Luo, School of Chemistry and Chemical Engineering, Southwest University, 400715 Chongqing, China     

Application of Pulsed Flow Analysis for Chemiluminescent Screening of Fluoxetine Counterfeit Pharmaceuticals

Abstract

A chemiluminometric methodology for fluoxetine determination based on its antioxidant scavenger effect on the fast chemiluminescence reaction between luminol and hypochlorite, is proposed. The developed procedure was implemented in a fully automated multi‐pumping flow system, combining the excellent mixing characteristics of the pulsed flow with chemiluminescence detection, resulting on a sensitive, simple, and fast procedure for fluoxetine determination in pharmaceutical formulations. Linear calibration plots for fluoxetine hydrochloride concentrations of up to 10 mg l^?1 (r=0.9995, n=7) were obtained, with an r.s.d<2% (n=10). Detection limit (3 σ) was 0.31 mg l^?1 and the sampling rate was about 136 determinations per h.     

Chemiluminescence mechanisms of cerium-norfloxacin and its application in urine analysis

In this article, novel chemiluminescence mechanisms between norfloxacin and cerium(IV) in an acidic medium were studied. Chemiluminescence spectra of the present system were recorded observing three maximum emissions at about 475 nm, 550 nm, and 620 nm, respectively. The results indicate that the chemiluminescence peaks located at 475 nm and 620 nm can be ascribed to the emission of a singlet oxygen, while the chemiluminescence emission at 550 nm occurred in course of the reaction between acidic cerium(IV) and the phenolic intermediate. Under optimum conditions, the chemiluminescence intensity was linear with the concentration of norfloxacin over the range of 2.0 × 10⁻⁸−1.0 × 10⁻⁵ g mL⁻¹ and the detection limit of 1.0 × 10⁻⁸ g mL⁻¹ (S/N = 3). The relative standard deviation was 1.94 % for a 4.0 × 10⁻⁷ g mL⁻¹ norfloxacin solution considering eleven repeated measurements. The present chemiluminescence system was successfully applied in the determination of norfloxacin in pharmaceutical preparations and concentration-time profiles in urine.     

Ultrasensitive Assay of Gatifloxacin at Picogram Level Based on its Enhancing Effect on the Myoglobin‐Luminol Chemiluminescence Reaction

Abstract

Picogram‐level gatifloxacin was determined based on its significantly catalyzed effect on myoglobin‐luminol chemiluminescence (CL) reaction in the flow injection system. The enhanced chemiluminescence intensity was linear with gatifloxacin concentration in the range from 50 ngl^?1–10 µg l^?1 (r²=0.9995), and the detection limit was 20 ng l^?1 (3σ). At a flow rate of 2.0 ml min^?1 for each line, a complete analytical process could be performed within 0.5 min, including sampling and washing, with a relative standard deviation of less than 4.0% (n=7). The proposed method was applied successfully in the determination of gatifloxacin in tablets, human serum and urine samples with the recovery from 97.4–104.5%.     

An Ultrasensitive Analytical Method Based on Chemiluminescence Sensing Electrochemical Parallel Catalytic Reaction Event

An ultrasensitive electrochemiluminescence (ECL) method on the combination of electrochemical parallel catalytic reaction and chemiluminesence signal sensing was proposed for improving ECL analytical characteristics using vanadate(V) as a representative. Vanadate(V) could be electrochemically reduced to generate vanadate(II) which could be chemically oxidized by potassium periodate to regenerate vanadate(V) and give parallel catalytic wave effect. Then, the reduced product of potassium periodate could react with butyl‐rhodamine B to emit a sensitive chemiluminescence signal. The chemiluminescence intensity was correlative with vanadate(V) concentration. The investigation on the electrochemical reaction rate constant (k⁰) confirmed that the speed of electrochemical reaction was faster than that of the subsequent chemiluminescence reaction. The possibility of the combination of electrochemical parallel catalytic reaction with chemiluminescence signal sensing was proved. The similar ECL behaviors could be observed at zirconia nanowires‐Nafion modified electrode. Because of the separation and enrichment effect of the modified electrode on vanadate(V), the selectivity and sensitivity was further improved greatly. Based on these findings, a new concept on the combination of electrochemical parallel catalytic reaction and chemiluminesence signal sensing was proposed and an ultrasensitive ECL method for the determination of vanadate(V) was developed at zirconia nanowires‐Nafion modified electrode. Under the optimum experimental conditions, the ECL intensity was linear with the concentration of vanadate(V) in the range of 2.0×10^?12 mol/L–2.0×10^?10 mol/L. The detection limit was 8.0×10^?13 mol/L, which was more than 6 orders of magnitude lower than that observed by electrochemical current transduction for electrochemical parallel catalytic reaction at zirconia nanowires‐Nafion modified electrode.     

In Vitro Monitoring of Picogram Levels of Captopril in Human Urine Using Flow Injection Chemiluminescence with Immobilized Reagent Technique

Abstract

A flow‐injection procedure for detection of captopril using a Co²⁺‐captopril complex formed on line based enhancement of luminol and dissolved oxygen chemiluminescence is described. The chemiluminescence reagents, luminol and Co²⁺, were both immobilized on ion exchange resin in the flow injection system. When captopril solution flowed through the immobilized Co²⁺ column, the Co²⁺‐captopril (1:2) complex formed on line could greatly enhanced the chemiluminescence intensity generated from the reaction between luminol and dissolved oxygen. The increment of chemiluminescence emission was correlated with the captopril concentration in the range from 7 to 1000 pg mL^?1, and the detection limit was 2 pg mL^?1 (3σ). One analysis cycle, including sampling and washing, could be accomplished in 0.5 min with relative standard deviations of less than 3.0% (n=11). The proposed method was applied directly in the assay of human urine without any pretreatment and it was found that the captopril concentration reached its maximum after being administrated orally for 1.5 hours, with the mean excretion ratio in 6.5 hours of 54.3% in the body of volunteers. The possible chemiluminescence mechanism was discussed.     

Determination of Puerarin in Pharmaceutical Injection by Flow Injection Analysis with Acidic Potassium Permanganate–Glyoxal Chemiluminescence Detection

Abstract

A simple flow injection chemiluminescence method with synergistic enhancement has been investigated for the rapid and sensitive determination of puerarin. The method is based on the enhancing effect of puerarin on the chemiluminescence emission generated by the oxidation of glyoxal with potassium permanganate in a sulfuric acid medium. The optimization of chemical variables influencing the chemiluminescence response of the method has been carried out by applying experimental design, using the proposed flow?injection manifold. Under the optimal conditions, the enhanced chemiluminescence intensity was linear with the concentration of puerarin over the range from 10.0 ng · ml^?1 to 7.0 µg · ml^?1 (R²=0.9972) with a detection limit (3σ) of 3.0 ng · ml^?1. At a flow rate of 3.0 ml · min^?1, a complete analytical process could be performed within 0.5 min, including sampling and washing, with a relative standard deviation of less than 3.0%. The proposed method was applied successfully in the assay of puerarin in pharmaceutical injection and human urine. The mechanism of chemiluminescence reaction was discussed briefly.     

A Chemiluminescence Reaction Between Hydroxyl Radical and Rhodamine 6G and its Applications

Abstract

A novel chemiluminescence (CL) reaction between hydroxyl radical and ascorbic acid is described in this paper. Hydroxyl radical generated on line by the reaction between Fe³⁺ solution and H₂O₂ solution in HCl medium could oxidize rhodamine 6G to produce weak chemiluminescence. It was found that ascorbic acid could enhance the chemiluminescence and the excited rhodamine 6G was the emitter of the chemiluminescence reaction. The possible mechanism of the CL system was also discussed. Ascorbic acid can be determined in the range of 2.0×10^?6?8.0×10^?4 mg/ml with a detection limit of 1×10^?6 mg/ml (3σ). A complete analysis could be done in 1 minute with the relative standard deviation of 3.1% for 5.0×10^?5 mg/ml (n=11). In order to study the chemiluminescence reaction further, the application to the determination of ascorbic acid in food using the chemiluminescence reaction combined with flow injection is investigated.     

Determination of cefetamet pivoxil in human urine and serum using flow injection chemiluminescence procedure

A sensitive chemiluminescence method based on enhancing the effect of cefetamet pivoxil on the chemiluminescent reaction between luminol and dissolved oxygen in a flow injection system was proposed for the determination of cefetamet pivoxil. The increment of the chemiluminescence intensity was proportional to the concentration of cefetamet pivoxil, which yields a calibration graph that is linear over the concentration from 0.4 to 100.0 ng/mL (r ² = 0.991) with the detection limit of 0.1 ng/mL (3σ). At a flow rate of 2.0 mL/min complete determination of cefetamet pivoxil, including sampling and washing, could be accomplished in 40 s with the RSD of less than 0.03 (n = 5). The proposed method was applied successfully to the determination of cefetamet pivoxil in human urine and human serum. The text was submitted by the authors in English.     

银（III）配合物-鲁米诺流动注射化学发光新体系测定肾上腺素

儿茶酚胺是一类非常重要的神经递质,在人体的心血管系统、神经系统、内分泌腺、肾脏、平滑肌等组织系统的生理活动中起着广泛的调节作用。肾上腺素为儿茶酚胺的一种,建立灵敏、高效的肾上腺素检测技术具有重要的临床意义。本文将银（Ⅲ）配合物与鲁米诺组成新的流动注射化学发光体系,利用碱性介质中肾上腺素对三价银配合物－鲁米诺化学发光体系有明显的增强效应来测定肾上腺素的含量,并据此建立了高效测定肾上腺素的流动注射化学发光新方法。在优化的条件下,该方法测定肾上腺素的线型范围为1.0×10－9～1.0×10－7 mol L-1,检出限为8.0×10－10 mol L-1,对1.5×10－8 mol L-1肾上腺素11次平行测定,其相对标偏差为2.9％。利用建立的分析方法测定了药物肾上腺素,并对三价银－鲁米诺化学发光新体系测定肾上腺素的反应机理进行了讨论。     

Application of direct-injection detector integrated with the multi-pumping flow system to chemiluminescence determination of the total polyphenol index

In this work, we present a novel chemiluminescence (CL) method based on direct-injection detector (DID) integrated with the multi-pumping flow system (MPFS) to chemiluminescence determination of the total polyphenol index. In this flow system, the sample and the reagents are injected directly into the cone-shaped detection cell placed in front of the photomultiplier window. Such construction of the detection chamber allows for fast measurement of the CL signal in stopped-flow conditions immediately after mixing the reagents. The proposed DID-CL-MPFS method is based on the chemiluminescence of nanocolloidal manganese(IV)-hexametaphosphate-ethanol system. The application of ethanol as a sensitizer, eliminated the use of carcinogenic formaldehyde. Under the optimized experimental conditions, the chemiluminescence intensities are proportional to the concentration of gallic acid in the range from 5 to 350 ng mL⁻¹. The DID-CL-MPFS method offers a number of advantages, including low limit of detection (0.80 ng mL⁻¹), high precision (RSD = 3.3%) and high sample throughput (144 samples h⁻¹) as well as low consumption of reagents, energy and low waste generation. The proposed method has been successfully applied to determine the total polyphenol index (expressed as gallic acid equivalent) in a variety of plant-derived food samples (wine, tea, coffee, fruit and vegetable juices, herbs, spices).     

In vitro monitoring of clindamycin in human urine using flow injection chemiluminescence

A sensitive chemiluminescence method for the determination of clindamycin is presented. The method is based on the inhibitory effect of clindamycin on the chemiluminescence reaction between luminol and myoglobin in a flow-injection system. The decrement in chemiluminescence intensity is linear with the logarithm of the clindamycin concentration over the range of 0.1–70.0 ng mL⁻¹ (r ² = 0.9995), with a detection limit of 0.03 ng mL⁻¹ (3σ). At a flow rate of 2.0 mL min⁻¹, the complete analytical process could be performed within 0.5 min, including sampling and washing, with a relative standard deviation of less than 3.0% (n = 5). The procedure was applied to the determination of clindamycin in human serum and in monitoring the excretion of clindamycin in human urine samples without any pretreatment process. It was found that the excretive clindamycin concentration reached its maximum 3 hours after oral administration. The clindamycin excretive ratio in 9 hours was 10.84% in the body of the volunteer.     

Chemiluminescence multichannel immunosensor for biodetection

An improved portable detector for biological compounds, the chemiluminescence multichannel immunosensor (CL-MADAG), has been developed and characterised. The device is based on a capillary ELISA technique in combination with a miniaturised fluidics system and uses chemiluminescence as the detection principle. The fluidics system construction allows three chemiluminescence immunoassays to be performed simultaneously within three fused silica capillaries (FSC). The CL-MADAG was characterised in a series of experiments with staphylococcal enterotoxin B (SEB) as a model toxin, the bacterial phage virus M13 as a virus simulant, and a pathogenic strain of Escherichia coli as simulant for bacteria. It was shown that the CL-MADAG can assay liquid samples for these substances within 24 min. The detection limits were 5 ng/ml for SEB, 10⁵ cfu/ml for E. coli O157:H7 and 10⁷ pfu/ml for M13.     

INVESTIGATIONS ON THE LIGHT-EMITTING SPECIES IN THE REACTION OF METMYOGLOBIN AND METHEMOGLOBIN WITH HYDROGEN PEROXIDE

Abstract The formation of a compound I type ferryl complex in the reaction of methemoglobin (MetHb) and metmyoglobin (MetMyo) with hydrogen peroxide is accompanied by strong chemiluminescence. An approach to identify the nature of the light-emitting species was made by the use of quenchers and sensitizers reacting with singlet oxygen and compounds interfering in the formation and reactivity of other reactive oxygen species. Singlet oxygen is not the source of light emission. This could be concluded from the results obtained using the specific singlet oxygen trap 9,10-anthracenedipropionic acid (ADPA) in combination with high-performance liquid chromatography (HPLC) analysis. The singlet oxygen adduct of ADPA was not formed in the incubation systems (MetHb or MetMyo/H₂O₂). Instead, ADPA was oxidized by the ferryl ion to a different oxidation product, which was characterized by HPLC and IR spectroscopy. In the case of MetHb-related chemiluminescence, light emission does not result from a single source. Both, SH-groups and O₂^.¯ radicals are involved because blocking of thiol-groups with N-ethylmaleimide (NEM) and scavenging of O₂^.¯(by superoxide dismutase) suppressed chemiluminescence by 50% and 30%, respectively. Development of MetMyo-related chemiluminescence is not dependent on thiol groups (which are not present in the globin moiety) and also 0₂^.¯is not involved. Although generation of chemiluminescence in MetHb and MetMyo seems to follow different mechanisms, both types of light-emitting species are sensitive to antioxidants, such as uric acid and ascorbate. The detection of the respective free radicals by means of ESR demonstrates that both MetHb- and MetMyo-mediated chemiluminescence is associated with a strong one-electron oxidizing species, which seems to be identical with the light-emitting source itself. Also desferal, which was originally used to exclude the involvement of a Fenton-type reaction, was readily oxidized to the nitroxide free radical associated with a strong decrease of chemiluminescence. This quenching effect was not dependent on iron complexation because the addition of iron was ineffective. In summary, chemiluminescence is not restricted to a single chemical process but is related to different one-electron transfer reactions from globin residues to the oxo-heme center.