Micellar‐Enhanced Spectrofluorimetric Determination of Trazodone Hydrochloride in Human Urine and Serum

Abstract

A novel developed spectrofluorimetric method for the determination of trazodone hydrochloride in the presence of sodium dodecyl sulfate (SDS) surfactant micelles was described. Under optimal conditions, there was a good linear relationship between fluorescence intensity and trazodone hydrochloride concentration in the range of 4.0×10^?9 to 8.0×10^?6 mol · l^?1with the detection limit of 1.3×10^?9 mol · l^?1 (S/N=3). This method has been used to determine trazodone hydrochloride in biological fluids.     

Study on the co-luminescence system Sm-Gd-BPMPHD-CTMAB and its analytical application

It has been found that the Sm-BPMPHD-CTMAB ion association system shows a strong fluorescence intensity. In this system some rare earth ions, such as Lu³⁺, Y³⁺, Gd³⁺ and Tb³⁺, exert an evident fluorescence enhancement effect. The formation conditions of the system and the factors affecting the columinescence effect were studied in detail in order to determine trace amounts of Sm³⁺. Under optimum conditions a linear relationship was obtained between the fluorescence intensity and the Sm³⁺ concentration in the range of 5.0×10^?8–8.0×10^?6 mol·L^?1. The detection limit of Sm³⁺ was 2.0×10^?8 mol·L^?1. The determination gave satisfactory results.     

Square‐Wave Voltammetry Determination of Aspartame in Dietary Products Using a Boron‐Doped Diamond Electrode

Abstract

The use of square‐wave voltammetry in conjunction with a cathodically pretreated boron‐doped diamond electrode for the analytical determination of aspartame in dietary products is described. In this determination, the samples were analyzed without previous treatment in a 0.5 mol l^?1 H₂SO₄ solution. A single oxidation peak at a potential of 1.6 V vs. Ag/AgCl (3.0 mol l^?1 KCl) with the characteristics of an irreversible reaction was obtained. The analytical curve was linear in the aspartame concentration range 9.9×10^?6 to 5.2×10^?5 mol l^?1 with a detection limit of 2.3×10^?7 mol l^?1. The relative standard deviation (n=5) obtained was smaller than 0.2% for the 1.0×10^?4 mol l^?1 aspartame solution. The proposed method was applied with success to the determination of aspartame in several dietary products and the results were similar to those obtained using an HPLC method at 95% confidence level.     

Electrochemical Study of Interaction Between Clozapine and DNA and Its Analytical Application

Abstract

The interaction between clozapine (CLZ) as an orally administrated antipsychotic drug with double stranded calf thymus DNA (dsDNA) was investigated at electrode surface using differential pulse voltammetry (DPV). Activated carbon paste electrode (CPE) was modified with dsDNA and used for monitoring the changes of the characteristics peak of CLZ in 0.05 M acetate buffer (pH 4.3). The adsorptive stripping voltammetry on dsDNA‐modified carbon paste electrode (dsDNA‐CPE) was used for determination of very low concentration of CLZ. Under optimal conditions, the oxidation peak current is proportional to CLZ concentration in the range of 7×10^?9?1.2×10^?6 mol l^?1 with a detection limit of 1.5×10^?9 mol l^?1 for 180 s accumulation time by DPV. The proposed dsDNA‐CPE was successfully used for determination of CLZ in human serum samples with recovery of 97.0±2.5%.     

Preconcentration of Rutin at a Poly Glutamic Acid Modified Electrode and its Determination by Square Wave Voltammetry

Abstract

The voltammetric determination of rutin in 0.04 mol l^?1 B‐R buffer (pH 4.0) by square wave voltammograms (+0.41 V vs. Ag/AgCl_(sat.)) at a poly glutamic acid modified glassy carbon electrode was found to be several orders of magnitude lower than that on a bare glassy carbon electrode. Rutin can be preconcentrated on the films of poly glutamic acid and presented linear relationship from concentration of 7×10^?7 to 1×10^?5 mol l^?1 in 0.04 mol l^?1 B‐R buffer pH 4.0. The method was successfully applied to the determination of rutin in pharmaceutical formulation without any pretreatment.     

Sensitive Determination of Prulifloxacin by Its Fluorescence Enhancement on Terbium(III)–Sodium Dodecylbenzene Sulfonate System

Abstract

A terbium-sensitized fluorescence spectrophotometry method using an anionic surfactant, sodium dodecyl benzene sulphonate (SDBS), was developed for the determination of prulifloxacin (PUFX). It was found that SDBS significantly enhanced the fluorescence intensity of the PUFX–Tb³⁺ complex (about 13-fold). The optimal experimental conditions were determined as follows: excitation and emission wavelengths of 290 nm and 545 nm, pH 8.0, 4.0 × 10^?5 mol L^?1 terbium(III), and 4.0 × 10^?4 mol L^?1 SDBS. The enhanced fluorescence intensity of the system (ΔF) showed a good linear relationship with the concentration of PUFX over the range 6.0 × 10^?8 to 2.0 × 10^?6mol L^?1 with a correlation coefficient of 0.9991. The detection limit (S/N = 3) was determined as 8.5 × 10^?9 mol L^?1. This method has been successfully applied for the determination of PUFX in pharmaceuticals and human urine/serum samples. Compared with most other methods reported, the rapid and simple procedure proposed here offered higher sensitivity, wider linear range, and good stability. The luminescence mechanism of the system was also discussed in detail. In the fluorescence system of PUFX–Tb³⁺–SDBS, SDBS acted not only as the surfactant but also as the energy donor.     

Study on the Fluorescence System of Oxolinic Acid‐Tb(III) and the Determination of Oxolinic Acid

Abstract

In Tris‐HCl buffer (pH=7.43), Tb³⁺ can react with oxolinic acid (OA) and form a 1:2 complex, which emits the intrinsic fluorescence of Tb³⁺. Based on this, a new fluorimetric method of determination of OA is developed. Under the optimum conditions, the enhanced fluorescence intensity of the system is proportional to the concentration of OA in the range of 1.5×10^?7～2.5×10^?5mol/L, and the detection limit is 5.5×10^?9 mol/L. Recovery test was also satisfactory. The experiments indicated that the luminescence mechanism was attributed to the M*–M luminescence.     

Flow Injection and Batch Spectrophotometric Determination of Ibuprofen Based on its Competitive Complexation Reaction with Phenolphthalein‐β‐Cyclodextrin Inclusion Complex

Abstract

Rapid, simple, and accurate spectrophotometric method is presented for the determination of ibuprofen by batch and flow injection analysis methods. The method is based on ibuprofen competitive complexation reaction with phenolphthalein‐β‐cyclodextrin (PHP‐β‐CD) inclusion complex. The increase in the absorbance of the solution at 554 nm by the addition of ibuprofen was measured. Ibuprofen can be determined in the range 8.0×10^?6 ?3.2×10^?4 and 2.0×10^?5?5.0×10^?3 mol l^?1 by batch and flow methods, respectively. The limit of detection and limit of quantification were 6.19×10^?6 and 2.06×10^?5 mol l^?1 for batch and 1.77×10^?5 and 5.92×10^?5 mol l^?1 for flow method, respectively. The sampling rate in flow injection analysis method was 120±5 samples h^?1. The method was applied to the determination of pharmaceutical formulations.     

Electrochemical Reduction and Voltammetric Determination of Metronidazole Benzoate at Modified Carbon Paste Electrode

Abstract

A metalloporphyrin incorporated carbon paste sensor has been developed for the determination of metronidazole benzoate (MTZB). Zn(II) complex of 5,10,15,20-tetrakis (3-methoxy-4-hydroxy phenyl) porphyrin (TMHPP) was used as the active material. The MTZB gave a well-defined reduction peak at?0.713 V in 0.1 mol l^?1 phosphate buffer solution of pH around 7. Compared with bare carbon paste electrode (CPE), the TMHPP Zn(II) modified electrode significantly enhanced the reduction peak current of MTZB as well as lowered its reduction potential. Under optimum conditions the reduction peak current was proportional to MTZB concentration over the range 1 × 10^?3 mol l^?1 to 1 × 10^?5 mol l^?1. The detection limit was found to be 4.36 × 10^?6 mol l^?1. This sensor has been successfully applied for the determination of MTZB in pharmaceutical formulations and urine samples.     

Study of Fluorescence System of Gmanylic Acid-Tb3+ and the Determination of Gmanylic Acid

Abstract

It was found that gmanylic acid (GMP) can be selectively completed with Tb³⁺ at pH 6.0-6.6, which then emits strong fluorescence characteristic of Tb³⁺. This reaction can be used for the determination of GMP in presence of adenylic acid (AMP), uridylic acid (UMP) and cylidylic acid (CMP). A linear relationship is obtained between the fluorescence intensity and GMP concentration in the range of 2.0×10^?7 - 1.0×10^?4M. The detection limit is 2.0×10^?8 M. The results showed that the composition ratio and apparent stability constant of GMP-Tb complex were 1:1 for GMP Tb³⁺- and 2.3×10^?5, respectively.     

Rapid Determination of Minocycline in Pharmaceutical Formulations and Human Urine/Serum Samples Based on the Minocycline-Europium-Sodium Dodecylbenzene Sulfonate Luminescence System

Abstract

A new luminescence method based on the minocycline (MNC)-europium (Eu³⁺)-sodium dodecylbenzene sulfonate (SDBS) system was developed for the determination of MNC. SDBS formed a ternary complex with MNC-Eu³⁺ and significantly enhanced the luminescence intensity of Eu³⁺. The enhanced luminescence intensity showed a good linear relationship with the concentration of MNC over the range of 4.0 × 10^?7 ～ 1.0 × 10^?5 mol L^?1 with a detection limit of 2.0 × 10^?8 mol L^?1. This method is rapid and sensitive, and has been successfully applied for the determination of MNC in capsules and human urine/serum samples. The luminescence mechanism is also studied.     

A Novel Sensitive Method for the Determination of Cadmium and Lead Based on Magneto‐Voltammetry

Abstract

A novel method for the ultratrace determination of Cd²⁺ and Pb²⁺ based on magneto‐voltammetry was developed. In the presence of a low strength magnetic field of 0.6 T, square wave stripping voltammetry (SWSV) of Cd²⁺ and Pb²⁺ was performed in this determination. A high concentration of redox species Fe³⁺ was added to the analytes to generate a large cathodic current during the preconcentration step. A large Lorentz force arising from the flux of net current through the magnetic field resulted in convective solution flow due to magnetohydrodynamics. Then more metal ions deposited on the electrode surface at a faster rate and an enhancement as large as 160% for the stripping peak current was observed. Under the optimal conditions, this method exhibits high sensitivities of 5.67 µA µM^?1 for Cd²⁺ and 6.98 µA µM^?1 for Pb²⁺, over the 1×10^?8 – 1×10^?6 mol l^?1 range. Detection limits as low as 9.0×10^?10 and 8.6×10^?10 mol l^?1 for Cd²⁺ and Pb²⁺ were obtained with a 2 min preconcentration time, respectively. The method was successfully applied to detect Cd²⁺ and Pb²⁺ in real water samples and the results were in agreement with atomic absorption spectrometry.     

Immobilization of Horseradish Peroxidase on a Biocompatible Titania Layer–Modified Gold Electrode for the Detection of Hydrogen Peroxide

Abstract

A procedure for fabricating an enzyme electrode has been described based on the effective immobilization of horseradish peroxidase to an ultrathin titania layer–modified self‐assembled gold electrode. The resulting electrode exhibits excellent electrocatalytical activity to hydrogen peroxide in the presence of hydroquinone as a mediator. The analytical conditions were studied in detail by using an amperometric method. Under the optimized conditions, a detection limit of 7.1×10^?7 mol l^?1 and a linear response to hydrogen peroxide that ranged from 1×10^?6 mol l^?1 to 7.6×10^?4 mol l^?1 were obtained. The reproducibility and stability were examined with satisfactory results.     

Flow‐Injection Spectrophotometric Determination of N‐acetylcysteine in Pharmaceutical Formulations with On‐Line Solid‐Phase Reactor Containing Zn(II) Phosphate Immobilized in a Polyester Resin

Abstract

A flow‐injection spectrophotometric procedure was developed for determining N‐acetylcysteine in pharmaceutical formulations. The sample was dissolved in deionized water and 400 µl of the solution was injected into a carrier stream of 1.0×10^?2 mol l^?1 sodium borate solution. The sample flowed through a column (70 mm length×2.0 mm i.d.) packed with Zn₃(PO₄)₂ immobilized in a polymeric matrix of polyester resin and Zn(II) ions were released from the solid‐phase reactor because of the formation of the Zn(II) (N‐acetylcysteine)₂ complex. The mixture merged with a stream of borate buffer solution (pH 9.0) containing 5.0×10^?4 mol l^?1 Alizarin red S and the Zn(II)Alizarin red complex formed was measured spectrophotometrically at 540 nm. The analytical curve was linear in the N‐acetylcysteine concentration range from 3.0×10^?5 to 1.5×10^?4 mol l^?1 (4.9 to 24.5 µg ml^?1) with a detections limit of 8.0×10^?6 mol l^?1 (1.3 µg ml^?1). The relative standard deviations (RSDs) were smaller than 0.5% (n=10) for solutions containing 5.0×10^?5 mol l^?1 (8.0 µg ml^?1) and 8.0×10^?5 mol l^?1 (13.0 µg ml^?1) of N‐acetylcysteine, and the analytical frequency was 60 determinations per hour. A paired t‐test showed that all results obtained for N‐acetylcysteine in commercial formulations using the proposed flow‐injection procedure and a comparative procedure agreed at the 95% confidence level.     

A Sensitive Flow Injection Fluorimetry for the Determination of Carbamazepine in Human Plasma

Abstract

A simple, sensitive, and specific flow injection fluorimetric method has been developed for the determination of carbamazepine (CBZ). The proposed method is based on use of a solid‐phase reactor containing lead dioxide for on‐line oxidization of CBZ into a strongly fluorescent compound in a medium of phosphoric acid. The product has a green‐yellow fluorescence at a maximum excitation wavelength of 355 nm and an emission wavelength of 478 nm. Under the optimum conditions, the fluorescence intensity is proportional to the concentration of CBZ ranging from 0.0005 to 4.000 µg mL^?1. The detection limit is 5.7×10^?5 µg mL^?1 (2.4×10^?10 mol L^?1) and the relative standard deviation is 1.4% at the sampling rate of 45 h^?1. The proposed method has been applied to clinical estimation of CBZ in real patients' plasma samples with the results compared with those obtained by HPLC method.     

Spectrofluorimetric method for the determination of uric acid in human serum

A new spectrofluorimetric method is described for the determination of uric acid (UA), that can remarkably reduce the fluorescence intensity of the enoxacin (ENX)-terbium ion (Tb³⁺) complex at 545 nm. The reduced fluorescence intensity of Tb³⁺ ion at pH 5.7 is proportional to the concentration of UA. Optimum conditions for the determination of UA have been investigated. The linear range and detection limit for the determination of UA are 6.0 × 10^?7–3.0 × 10^?5 M and 1 × 10^?7 M, respectively. The relative standard deviation (RSD) was 0.4% for 6 × 10^?6 M UA (n = 11). The method is simple, practical and relatively free of interferences. It has been successfully applied to assess UA in serum at the level of 3 × 10^?4 M with an RSD of 5–7% (n = 3). The results were evaluated by comparison with a common clinical spectrophotometric method using phosphotungstic acid as developer.     

Analysis of Aromatic Amines in Surface Waters Receiving Wastewater from a Textile Industry by Liquid Chromatographic with Electrochemical Detection

Abstract

A high performance liquid chromatography (HPLC) method with electrochemical detection (ED) was developed for the determination of benzidine, 3,3‐dimethylbenzidine, o‐toluidine and 3,3‐dichlorobenzidine in the wastewater of the textile industry. The aromatic amines were eluted on a reversed phase column Shimadzu Shimpack C₁₈ using acetonitrile+ammonium acetate (1×10^?4 mol L^?1) at a ratio 46:54 v/v as mobile phase, pumped at a flow rate of 1.0 mL min^?1. The electrochemical oxidation of the aromatic amines exhibits well‐defined peaks at a potential range of +0.45 to +0.78 V on a glassy carbon electrode. Optimum working potentials for amperometric detection were from 0.70 V to +1.0 V vs. Ag/AgCl. Analytical curves for all the aromatic amines studied using the best experimental conditions present linear relationship from 1×10^?8 mol L^?1 to 1.5×10^?5 mol L^?1, r=0.99965, n=15. Detection limits of 4.5 nM (benzidine), 1.94 nM (o‐toluidine), 7.69 nM (3,3‐dimethylbenzidine), and 5.15 nM (3,3‐dichlorobenzidine) were achieved, respectively. The detection limits were around 10 times lower than that verified for HPLC with ultra violet detection. The applicability of the method was demonstrated by the determination of benzidine in wastewater from the textile industry dealing with an azo dye processing plant.     

Determination of Benzoyl Peroxide Levels in Wheat Flour and Pharmaceutical Preparations by Differential Pulse Voltammetry in Nonaqueous Media

Abstract

Benzoyl peroxide (BP) was determined by differential pulse voltammetry (DPV) using a glassy carbon electrode in a dichloromethane‐acetic acid (1.5×10^?2 mol l^?1) solution and tetrabutyl ammonium perchlorate (0.01 mol l^?1) as the supporting electrolyte. The peak potential was ?0.045 V (vs. Ag/AgCl). There was a good linear relationship between the peak current and the benzoyl peroxide concentration in the range of 2.5×10^?6–1.0×10^?4 mol l^?1. The detection limit of the method was 2.5×10^?7 mol l^?1. The recovery was 94.8–106.0%. The samples of wheat flour and the pharmaceutical preparations for the treatment of acne vulgaris were directly detected with desired results. The reaction mechanism of benzoyl peroxide on the electrode was also discussed, which was two electrons and two protons irreversible reaction.     

Electrochemical Determination of Citalopram by Adsorptive Stripping Voltammetry–Determination in Pharmaceutical Products

Abstract

The electrochemical behavior of citalopram was studied by square‐wave and square‐wave adsorptive‐stripping voltammetry (SWAdSV). Citalopram can be reduced and accumulated at a mercury drop electrode, with a maximum peak current intensity being obtained at a potential of approximately ?1.25 V vs. AgCl/Ag, in an aqueous electrolyte solution of pH 12. A SWAdSV method has been developed for the determination of citalopram in pharmaceutical preparations. The method shows a linear range between 1.0×10^?7 and 2.0×10^?6 mol L^?1 with a limit of detection of 5×10^?8 mol L^?1 for an accumulation time of 30 s. The precision of the method was evaluated by assessing the repeatability and intermediate precision, achieving good relative standard deviations in all cases (≤2.3%). The proposed method was applied to the determination of citalopram in five pharmaceutical products and the results obtained are in good agreement with the labeled values.     

A Multicommuted Flow‐based System for Hydrogen Peroxide Determination by Chemiluminescence Detection Using a Photodiode

Abstract

A simple, rapid, and automated assay for hydrogen peroxide in pharmaceutical samples was developed by combining the multicommutation system with a chemiluminescence (CL) detector. The detection was performed using a spiral flow‐cell reactor made from polyethylene tubing that was positioned in front of a photodiode. It allows the rapid mixing of CL reagent and analyte and simultaneous detection of the emitted light. The chemiluminescence was based on the reaction of luminol with hydrogen peroxide catalyzed by hexacyanoferrate(III).

The feasibility of the flow system was ascertained by analyzing a set of pharmaceutical samples. A linear response within the range of 2.2–210 µmol l^?1 H₂O₂ with a LD of 1.8 µmol l^?1 H₂O₂ and coefficient of variations smaller than 0.8% for 1.0×10^?5 mol l^?1 and 6.8×10^?5 mol l^?1 hydrogen peroxide solutions (n=10) were obtained. Reagents consumption of 90 µg of luminol and 0.7 mg of hexacyanoferrate(III) per determination and sampling rate of 200 samples per hour were also achieved.