电位型聚吡咯pH传感器的制备

电位型聚吡咯pH传感器的制备;聚吡咯; pH传感器; 电化学聚合; 交流阻抗     

Effect of Electrolytes on Redox Reactivity of Polypyrrole

Doping and dedoping characteristics of polypyrrole (PPy) formed electrochemically have been examined by means of energy-dispersive X-ray spectroscopy (EDS). Dodecylsulfate ions (DS⁻) and perchlorate ions (ClO⁻₄) were embedded simultaneously in PPy when both ions were present on the polymerization of pyrrole. Sequential formation of PPy in the single dopant system allowed PPy/ClO₄ to grow in the bulk of PPy/DS but not vice versa. DS⁻ was embedded not to leave the polymer on reduction but ClO⁻₄ moved in and out of the polymer on redox reaction. Cyclic voltammetry was employed to determine the redox reactivity of PPy in different electrolyte systems. NaClO₄ was a better electrolyte for cyclic redox reaction than LiClO₄ or KClO₄. NaCl was a good electrolyte for cyclic redox reaction but Cl⁻ failed to penetrate in the PPy/DS bulk on reoxidation. The cyclic redox reactivity lasted longest when PPy/DS was redox-cycled sequentially in the NaCl electrolyte system and then in the NaClO₄ system. © 1997 John Wiley & Sons, Ltd.     

聚吡咯纳米线(管)的合成

聚吡咯纳米线(管)是一种极具应用潜力的新材料.本文综述了聚吡咯纳米线(管)的各种合成方法.并对各方法的优缺点进行了评述.     

Optimization of Polypyrrole Chemical Synthesis by Heat Flow Reaction Calorimetry

Chemical polymerization of pyrrole (Py) was carried out in a reaction calorimeter by using FeCl₃ or CuCl₂ as an oxidant in an acetonitrile medium. The formation heat of polypyrrole (PPy), determined under a wide range of reactant concentrations and reaction temperatures, is directly related to the PPy yields and to the degree of polymerization. Due to the negative values of both the entropy and enthalpy of the reaction the gravimetric yield is inversely related to the temperature and directly to the Py concentration. The yields to the PPy and the related reaction heats, are close to zero when the ceiling temperatures are reached (T_ceil=348 K for Fe-doped and T_ceil=313 K for Cu-doped PPys). It was observed that a ceiling concentration corresponds to each ceiling temperature and only light oligomers are formed if Py concentration is too low. The electric conductivity values of the products were also determined and a direct relationship to the yields was found as well. The highest electric conductivity value (C=0.6 S cm^–1) was related to the PPy fresh synthesized from a 0.017 M Py solution.This revised version was published online in November 2005 with corrections to the Cover Date.     

Synthesis and Characterization of Polypyrrole Nanoparticles and Their Nanocomposites with Poly(propylene)

Summary: Conducting polypyrrole (PPy) nanoparticles were synthesized via microemulsion polymerization. PP/PPy nanocomposites were prepared by melt-mixing of polypyrrole with polypropylene (PP) and processed with injection molding. Tensile tests have revealed that increasing amount of PPy increased the strength and the stiffness of the nanocomposite while limiting the elongation of PP. Thermal gravimetric analysis has showed that incorporation of PPy nanoparticles has improved the thermal stability of the nanocomposites. Increasing amount of PPy nanoparticles increases the conductivity of nonconductive PP up to 2,4.10⁻⁴ Scm⁻¹. The same techniques were used to characterize nanocomposites containing 2% w dispersant. Composites prepared with dispersant have involved smaller dimension PPy nanoparticles and exhibited improvement in some mechanical and thermal properties.     

Reactive Template Synthesis of Polypyrrole Nanotubes for Fabricating Metal/Conducting Polymer Nanocomposites

Unique nanocomposites of polypyrrole/Au and polypyrrole/Pt hybrid nanotubes are synthesized employing polypyrrole (PPy) nanotubes as an advanced support by solution reduction. The conducting polymer PPy nanotubes are fabricated by using pre‐prepared MnO₂ nanowires as the reactive templates. MnO₂ nanowires induce the 1D polymerization of pyrrole monomers and the simultaneous dissolution of the templates affords the hollow tube‐like structure. The loading content of metal nanoparticles in the nanocomposites could be adjusted by simply changing the amount of metal precursors. This work provides an efficient approach to fabricate an important kind of metal/conducting polymer hybrid nanotubes that are potentially useful for electrocatalyst and sensor materials.     

Effect of the Dopant Nature on the Response of Sensor Arrays Based on Polypyrrole

The effect of the nature of the dopant on the response of a sensor array based on films of polypyrrole under the influence of the vapor of various organic solvents was studied. It was found the electric conductivity of the polymer can both increase and decrease during the action of analytes on electropolymerized films of polypyrrole. It is suggested that the main factors determining the response of polypyrrole are the morphology of the films and the type of charge carriers in the polymer, which depend on the nature of the dopant anion, and also the polarity and nucleophilicity/electrophilicity of the analyte. The responses of polypyrrole and polyaniline are compared, and the effect of the nature of the conducting polymer on them is analyzed. __________ Translated from Teoreticheskaya i Eksperimental'naya Khimiya, Vol. 41, No. 5, pp. 265–271, September–October, 2005.     

Preparation and Properties of Composite Polypyrrole/Pt Catalyst Systems

Three different methods for the preparation and modification of conducting polymer/noble metal catalyst systems consisting of polypyrrole (PPy) and platinum (Pt) are described for the anodic oxidation of methanol. The first method consists of the electrochemical deposition of a thin PPy film on glassy carbon substrate, which is modified with Pt either by electroreduction of hexachloroplatinate, codeposition from a nanodispersed Pt solution, or incorporation of tetrachloroplatinate as counterion followed by cathodic reduction. A second method is based on the preparation of nanoscale PPy(PSS) particles by chemical polymerization with polystyrenesulfonate PSS^– as the counterion. This material is a favorable catalyst support for nanodispersed Pt due to its mixed electronic and cationic conductivity. To study the electrochemical properties, the particulate system PPy(PSS)/Pt is fixed in a carbon fiber electrode. A third method was developed which brings the polypyrrole in close contact to a proton exchanger membrane (Nafion) using a special chemical deposition procedure. This method is useful for preparing a membrane electrode assembly (MEA) consisting of Nafion/PPy/Pt. The structural, morphological, and electrocatalytic properties for methanol oxidation were studied depending on the preparation method applied using surface analytical techniques (TEM, SEM, and EDX) and electrochemical measurements (cyclic voltammetry and transient techniques).     

2D Confined‐Space Assisted Growth of Molecular‐Level‐Thick Polypyrrole Sheets with High Conductivity and Transparency

Herein, the use of a 2D soft template system composed of hundred‐nanometer‐thick water/ethanol mixed layers sandwiched by lamellar bilayer membranes of a self‐assembled amphiphilic molecule to produce ultrathin polyprrole (PPy) with a uniform thickness as thin as 3.8 nm and with large dimensions (>2 μm²) is presented. The obtained PPy nanosheets exhibit regioregularity with ordered chain alignment where the polymer chains in the nanosheets produced are well aligned with a clear interchain spacing as confirmed by small‐angle X‐ray scattering measurement. The molecular‐level‐thick PPy nanosheets exhibit extremely high conductivity up to 1330 S m⁻¹, thanks to the ordered alignment of polymer chains in the nanosheets, and a high transparency in both the visible region (transmittance >99%) and near‐infrared region (transmittance >93%).

     

Responses of Metalloporphyrin‐Based Ion‐Selective Electrodes to pH

The ISEs based on [M(tpp)Cl] (M: Al, Ga, In, Mn, Fe; H₂tpp: tetraphenylporphin) had pH responses across their respective pH ranges, which had some correlation with the pH ranges of the two‐phase hydrolysis. Such pH responses are ascribed to the phase boundary potentials relating to the acid‐base pairs of [M(tpp)(H₂O)]⁺ and [M(tpp)(OH)] and/or [M₂(tpp)₂O]. The potential responses of the In and Fe complexes had the upper limitation to pH of 90 % hydrolysis, whereas those of the Al and Ga complexes had the extension to at least pH 12, indicating stable existence of [M(tpp)(H₂O)]⁺ even in contact with strongly alkaline solutions.     

Redox,ionic strength,and pH sensitive supramolecular polymer assemblies

Formation of micelle‐type assembly from supramolecular complexation of a surfactant and an oppositely charged homopolymer is demonstrated. The lower CAC observed for these assemblies suggest that the electrostatic interaction provides an amphiphilic homopolymer‐like structure. The stimulus‐induced disassembly of these supramolecular structures has been accomplished with variations in redox characteristics, ionic strength, and pH of the medium. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1052–1060, 2009     

Redox capacitance of poly-3,4-ethylenedioxythiophene studied by cyclic voltammetry and faradaic impedance spectroscopy

The paper presents results of studying the electrochemical properties of poly-3,4-ethylenedioxythiophene films using the methods of cyclic voltammetry and faradaic impedance spectroscopy in acetonitrile and propylene carbonate solutions of different electrolytes: LiClO₄, Bu₄NBF₄, Bu₄NPF₆. The effect of the film synthesis conditions, the nature of anion and solvent, and the supporting electrolyte concentration on the film redox capacitance is discussed. Main attention is paid to the comparison of values characterizing the redox capacitance of a poly-3,4-ethylenedioxythiophene film C _lf (determined using the faradaic impedance method) and C _cv (determined using the cyclic voltammetry method) and the studies of their dependence on the varied experimental factors. The experimental C _lf vs. E curves are analyzed using the relationships of a model of a uniform film.     

Radii of Redox Components from Absolute Redox Potentials Compared with Covalent and Aqueous Ionic Radii

Aqueous standard potentials, referred to that of the SHE as zero, were recently shown to vary linearly with gaseous ionization potentials, with the absolute potential of SHE as the intercept. This enabled arriving at the absolute redox potentials of elements. Here, the distances between the oxidized and reduced forms in aqueous solutions have been evaluated. From the linear dependence of these distances on the covalent radii of atoms, the radii of the redox components have been obtained. The latter also vary linearly with the aqueous ionic radii estimated earlier from ion‐water distances, and indicate the presence of aqueous molecular anions.     

Synthesis and Electrochemical Characterization of Modified Graphene/Polypyrrole Nanocomposites

Nanocomposites based on both modified/unmodified graphene and polypyrrole, were investigated as electrode materials for supercapacitor application. All the nanocomposites were prepared by in-situ oxidative polymerization method using ammonium persulfate as oxidant. The amine functionalization of Graphene was confirmed by FTIR and X-ray Photo Electron Spectroscopy (XPS). Field Emission Scanning Electron Microscopy (FESEM) and High Resolution Transmission Electron Microscopy (HRTEM) analysis were performed to study the morphology of the nanocomposites. The maximum capacitance value was found as 240 F/g for unmodified graphene based composite. Though the capacitance value was found to be lower for modified graphene based composite, the cyclic stability was found to be higher as compared to unmodified graphene/polypyrrole nanocomposite.     

Facile Synthesis of Double‐Shelled Polypyrrole Hollow Particles with a Structure Similar to That of a Thermal Bottle

Polystyrene (PS) hollow spheres containing a hole on the surface were used as templates to fabricate double‐shelled polypyrrole (PPy) hollow particles with a unique structure similar to that of a thermal bottle. Thanks to the hole on the surface, the monomer and initiator could easily and quickly diffuse into the interior of the PS hollow sphere to generate uniform PPy coatings on both the inner and outer surfaces of the hollow template. When the PS template was selectively removed with tetrahydrofuran, we obtained a double‐shelled hollow particle with a structure resembling that of a thermal bottle. We also demonstrated that the morphology and porosity of the resultant PPy coatings could be manipulated and fine‐tuned by adjusting at least three parameters: the concentration of monomer, the polymerization time, and the addition of poly(vinyl pyrrolidone).

     

Ion‐selective Electrodes with 3D Nanostructured Conducting Polymer Solid Contact

Until now both ion‐to‐electron transducers as well as large surface area nanostructured conducting materials were successfully used as solid contacts for polymer‐based ion‐selective electrodes. We were interested to explore the combination of these two approaches by fabricating ordered electrically conducting polymer (ECP) nanostructures using 3D nanosphere lithography and electrosynthesis to provide a high surface area and capacitive interface for solid contact ion‐selective electrodes (SC‐ISEs). For these studies we used poly(3,4‐ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT(PSS)) films with 750 nm diameter interconnected pores as the intermediate layer between a glassy carbon electrode and a Ag⁺ ‐selective polymeric membrane. We also investigated the feasibility of loading the voids created in the polymer film with a lipophilic redox mediator (1,1’‐dimethylferrocene) to provide the respective ISEs with well‐defined/controllable E⁰ values. These expectations were fulfilled as the standard deviation of E⁰ values were reduced with almost an order of magnitude for 3D nanostructured SC‐ISEs filled with the redox mediator as compared to their redox mediator‐free analogs. The detrimental effect of the redox mediator extraction into the plasticized PVC‐based ion‐selective membrane (ISM) was efficiently suppressed by replacing the PVC‐based ISMs with a low diffusivity silicone rubber matrix.     

Synthesis and characterization of polypyrrole/graphite oxide composite by in situ emulsion polymerization

This work demonstrates a feasible route to synthesize the layered polypyrrole/graphite oxide (PPy/GO) composite by in situ emulsion polymerization in the presence of cationic surfactant cetyltrimethylammonium bromide (CTAB) as emulsifier. AFM and XRD results reveal that the GO can be delaminated into nanosheets and well dispersed in aqueous solution in the presence of CTAB. The PPy nanowires are formed due to the presence of the lamellar mesostructured (CTA)₂S₂O₈ as a template. The results of the PPy/GO composite indicate the PPy insert successfully into GO interlayers, and the nanofiber‐like PPy are deposited onto the GO surface. Owing to π–π electron stacking effect between the pyrrole ring of PPy and the unoxided domain of GO sheets, the electrical conductivity of PPy/GO composite (5 S/cm) significantly improves in comparison with pure PPy nanowires (0.94 S/cm) and pristine GO (1 × 10^?6 S/cm). © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1329–1335, 2010