Polarographic and Voltammetric Study of the Sc(III)-Acid Chrome Blue K Complex and Determination of Trace Scandium

Abstract

A new system of polarographic adsorptive wave for determining trace scandium was proposed. In 0.2 mol/L NH₄OAc, the Sc(III)- ACBK [1,8- dihydroxy- 2- (2- hydroxy- 5- sulfo- 1- phenylazo)- 3,6- disulfo- naphthalene, called acid chrome blue K] complex emerged a sensitive adsorptive complex wave(Ep′ = -0.67V). The molar ratio of Sc(III) to ACBK in the complex was established as 1: 2 and the apparent stability constant β₂ = 2.7 × 10¹⁵. But for Y(III), the molar ratio was 1: 1 and β = 1.5 × 10⁵. Because of the particularity of Sc complex, the sensitivity and the selectivity of determination Sc are much better than that of other rare earth ions. The detection limit is 1.1 × 10^?7 mol/L for oscillopolarography and 2.0 × 10^?8 mol/L for adsorptive stripping voltammetry.     

Electrochemical Determination of Boron in Natural Waters

Abstract

A sensitive voltammetric method for the determination of trace boron, based on the formation of the complex of boric acid with 4‐hydroxy‐5‐[salicylideneamino]‐2‐7‐naphthalenedisulfonic acid (azomethine H) is described. The reduction of the boric acid‐azomethine H complex at a hanging mercury drop electrode was exploited by square wave voltammetry (SWV) and cyclic voltammetry to determine boron in natural water samples, which were collected in the regions surrounding the boron mines of Central Anatolia. A reduction peak that belongs to the boric acid‐azomethine H complex at this electrode was observed at ?1.05 V vs. Ag/AgCl/KCl_(sat.). The effects of various parameters, such as ligand concentration, boric acid concentration, and formation time of the boric acid‐azomethine H complex, were investigated. Electrochemical experiments were conducted in 1.0 M HOAc/0.5 M NH₄OAc buffer at pH of 4.4±0.2. Linear working range was established by regression analysis between 5.0×10^?8 M and 1.0×10^?4 M. The probable metal cation interferences in water samples were eliminated by adding EDTA (ethylenediaminetetraacetic acid) to the samples. Data obtained using the square wave voltammetric (SWV) technique was compared statistically with inductively coupled plasma mass spectroscopy (ICP‐MS) data. Evaluation of the method based on statistical data was performed and the values of the limit of detection (LOD) and limit of quantitation (LOQ) were found to be 4.17×10^?6 M and 1.39×10^?5 M, respectively.     

The Reduction of CS2N3 − Ion In Acidic Solution

Abstract

The electrochemical behaviour of 1, 2, 3, 4-thiatriazol-5-thiolate CS₂N₃ ^? ion in acidic solutions has been investigated. A cathodic wave has been detected, (E_1/2 =?1.05V versus S.C.E., M=1.0M (NaC10₄) and NaCS₂N₃ 1.00 × 10^?3M). The characteristics of this wave have been investigated by D.C., A.C. polarography and controlled potential electrolysis. A mechanism which involves the interaction of CS₂N₃ ^? with mercury and cyclic regeneration of mercury has been proposed. The reduction of CS₂N₃ ^? by amalgamated zinc has been also investigated and the results correlated with the pseudo-halide electrochemical reduction.     

Bestimmung Von Molybdän Nach Extraction Mit O,O,S - Triäthyldithiophosphat

Abstract

The interaction of molybdenum(V) with potassium thiocyanate in a medium of O,O,S-triethyldithiophosphate [(C₂H₅O)₂P(S)SC₂H₅] and ethanol at a ratio 4:1 has been studied.

The stability constant of the molybdenum(V) thiocyanate complex was determined to be 7.6 × 10² with a molar ratio Mo(v) : SCN of 1:1. A new method based on the formation of the molybdenum-thiocyanate complex in the organic phase has been developed for the determination of molybdenum in steel.     

Studies on Polarographic Adsorptive Wave of the System of the Rare Earth (III)-Copper(Ii)-M-Trifluomethyl Chlorophosphonazo

Abstract

A new heteronuclear complex, rare earth (III)-copper (II)-m-trifluomethyl chlorophosphonazo (CPA-mCF₃) system for determining trace rare earth ions is presented. In a medium of 0.02mol/L NH₄Cl,1. 0×10^?3mol/L Cu(II),1.0×10^?5 mol/L CPA-mCF₃, a very sensitive polarographic adsorptive wave is observed by using a single sweep oscillopolarograph at about –0.83V (vs. Ag/AgCl). The linear relationship between the peak current and the concentration of rare earth exists from 6. 0×10^?9 to 1. 0×10^?6 mol/L. The detection limit of rare earth is down to 2. 0×10^?9 mol/L for Tm³⁺. This method has been applied to determine trace RE in several samples of Chinese tea. The results are satisfactory. The composition of the complex is detected as RE (II): Cu (II): CPA-mCF₃ = 1: 1: 2.     

Pulse radiolysis and voltammetry of bis(diamine)dioxorhenium(V) complexes

The Re(V) complexes [Re(L)₂O₂]⁺ [L = en (1,2-diaminoethane) or pn (1,3-diaminopropane)] are reduced irreversibly near −1.5 V (SCE) in a neutral or basic aqueous solution, but protonation causes a significant anodic shift of ≈ + 1 V. No oxidation is observed in aqueous solution before the solvent limit (≈ + 1 V) at solid electrodes but oxidation of [Re(en)₂O₂]⁺ with OH in pulse radiolysis experiments generates a Re(VI) intermediate which decays by first-order kinetics (k_d 2.5 × 10⁴ s⁻¹), apparently by rate-determining ligand loss. Reduction with e⁻_aq likewise forms transient d³-Re(IV) complexes which show first-order decay (6 × 10³ s⁻¹ for en, 9 × 10³ s⁻ for pn), ultimately to ReO₂. Transient intermediates were characterized by their electronic spectra, which for d³-Re(IV) complexes are qualitatively similar to Cr(III) and known octahedral Re(IV) complexes with different donor ligands.     

Investigations on Adsorption Potentiometry Part V Derivative Adsorption Chronopotentiometry of Beryllium(II)-4-[(4-diethylamino-2-hydroxypheanyl)-azo]-5-hydroxy-naphthalene-2,7-disurphonic Acid System

Abstract

An electroanalytical methood, based on derivative chronopotentiometry of the complex of beryllium(II) with 4-[(4-diethylamino-2-hydroxy-phenyl)-azo]-5-hydroxy-naphthalene-2,7-disurphonic acid (Beryllon II) accumulated adsorptively on the surface of a hanging mercury drop electrode, has been developed for determining trace beryllium in food. The dependences of the peak height on the dt/dE vs. E curve on the pre-concentration time, preconcentration potential and the constant reducing current are discussed. In 0.15 mol/1 NH_s+0.05 mol/1 NH₄Cl, 4×10^?7 mol/l Beryllon II, and at a preconcentration potential of -0.30 V (ve. SCE), the limit of detection and linear range are 1 × l0^?10 mol/l and 3 × 10^?10 -2 × l0^?7 mol/l, Iwpectively. The relative standard error of the method is 2.3% for 6 × 10^?8 mol/l Be(II). The method WBB applied to samples of food. The electrode procees hae been diecueeed.     

Formation of an oxo-free rhenium(v) complex with 2-aminothiophenol

The reaction of a twofold molar excess of 2-aminothiophenol (H₂L) with trans-[ReOCl₃(PPh₃)₂] in benzene led to the isolation of the oxo-free rhenium(V) complex [ReCl(PPh₃)L₂] (1). IR, ¹H NMR and X-ray crystallographic results indicate that the ligands L coordinate in a dianionic amidothiolate form to the metal and that the complex has the unusual skew-trapezoidal bipyramidal geometry. The ligands L have an average bite angle of 78.8(1)°, with average Re–N and Re–S bond lengths equal to 1.978(5) and 2.297(1)?Å, respectively.     

The Use of the CS2N− 3/HSO− 3/O2 Reaction for the Analytical Determination of Dissolved Oxygen

Abstract

A new analytical Spectrophotometric method has been developed for the determination of dissolved O₂ in the range 4.6 × 10^?6?4.1 × 10^?5M, based on the CS₂N^? ₃/HSO^? ₃/O₂ reaction. In one single experiment 2.3 × 10^?5 M of oxygen can be determined with an uncertainty of ± 7 × 10^?7M for a confidence level of 95%.     

Study on the determination of trace rhenium (VII) by the adsorption differential pulse polarography

The determination of trace rhenium (VII) by differential pulse polarography in the system of H₂SO₄-(NH_sOH)₂ · H₂SO₄-TeO^2?₄ is markedly improved by the addition of Nitron, which is adsorbed on the surface of mercury electrode. The limit of detection is down to 2 × 10¹⁰ M. The adsorptive peak potential is ?0.80 V (vs. SCE). In the ranges of 5 × 10¹⁰—10^?8, 1 × 10^?5—10^?7 and 1 × 10^?7—10^?6M, there are good linear relationships between the peak current increment and the concentration, of which the relative standard deviations are 9.5, 6.6, 1.8% respectively with the correlation coefficients of linear regression of 0.995–0.999. The results relating to this polarographic wave show that it is an adsorption-catalytic wave. The mechanism of the electrode reaction is discussed.     

Synthesis and characterization of a new cyclic phosph(V)azane ligand [(C6H5N)P(O)H]2 and its zinc(II) complex

The new cyclic phosph(V)azane ligand [(C₆H₅N)P(O)H]₂ (2) is obtained from the reaction between PCl₃ and PhNH₂ in toluene followed by controlled hydrolysis of the product in an H₂O–CHCl₃ solution. Compound 2 is the first example of P(V) dimer [(µ-NC₆H₅)P(H)=O]₂, a P₂N₂ ring with two P(O)H moieties. The reaction of 2 with ZnCl₂ in a molar ratio of 1?:?1 in tetrahydrofuran yields the cyclophosph(V)azane complex Cl₂Zn[(C₆H₅N)P(O)H]₂ (3) in which Zn–O bonds form directly between a cyclic phosph(V)azane ligand and Zn(II). The products have been characterized by infrared, multinuclear (¹H, ³¹P, ¹³C) NMR, mass spectrometry, and elemental analysis.     

Electrochemical investigation and determination of ceftazidime in pharmaceutical dosage forms and human urine

A voltammetric study of the oxidation of Ceftazidime (CEFT) has been carried out at the glassy carbon electrode by cyclic, differential pulse (DPV) and square wave (SWV) voltammetry. The oxidation of CEFT was irreversible and exhibited diffusion controlled process depending on pH. The oxidation mechanism was proposed and discussed. According to the linear relationship between the peak current and concentration, DPV and SWV voltammetric methods for CEFT assay in pharmaceutical dosage forms and human urine were developed. For analytical purposes, a well resolved diffusion controlled voltammetric peak was obtained in 0.1 M H₂SO₄ at 1.00 and 1.02 V for differential pulse and square wave voltammetric techniques, respectively. The linear response was obtained within the range of 4 × 10^?6?8 × 10^?5 M with a detection limit of 6 × 10^?7 M for differential pulse and 4 × 10^?6–2 × 10^?4 M with a detection limit of 1 × 10^?6 M for square wave voltammetric technique. The determination of CEFT in 0.1 M H₂SO₄ was possible over the 2 × 10^?6–1 × 10^?4 M range in urine sample for both techniques. The standard addition method was used for the recovery studies.     

A Simple,Portable and Low Cost Device for a Colorimetric Spot-Test Quantitative Analysis

ABSTRACT

This paper describes a very simple device that can be used for colorimetric quantitative determinations, including spot-test analysis. The sensor is a light detector resistor (LDR) placed into a black PTFE cell and coupled to a low cost multimeter (Ohmmeter). The device has been tested and is easy and fast to use. Quantitative studies were performed with KMnO4 solutions and with the vanadium (V)/PAR/H₂O₂ system. Calibration curves were obtained by plotting the electric resistance of the LDR against the concentration of the colored species from 0 (blank) to 4.0 × 10^-3 mol L^-1 for permanganate and from 0 (blank) to 5.0 × 10^-5 mol L^-1 for vanadium. The detection limit (3σ) was found to be about 5.0 × 10^-5 mol L^-1 for permanganate and 4.0 × 10^-6 mol L^-1 for vanadium. The device was used to analyze total vanadium, as vanadium (V), in wastes from an adipic acid plant. The results obtained clearly show that the device can be used for accurate, precise, fast, in situ and low cost colorimetric analysis including quantitative spot-test procedures.     

A novel Hg2+ fluorescence sensor TPE-TSC based on aggregation-induced emission

Abstract

A fluorescent sensor TPE-TSC with aggregation induced emission (AIE) characteristic is synthesized for detecting Hg²⁺ by attaching thiosemicarbazide (TSC) unit into tetraphenylethylene (TPE) group. TPE-TSC exhibits intense green emission in DMSO/H₂O (V:V?=?1:9) solution with the formation of the aggregation. TPE-TSC shows outstanding fluorescence quenching toward Hg²⁺ over other metal ions due to the formation of complex TPE-TSC/Hg²⁺ with a 2:1 binding ratio. The detection limit of TPE-TSC for Hg²⁺ is 1?×?10^?5 mol·L^?1.     

Determination of Three Imidazole Derivatives by Flow-Injection Chemiluminescence

Abstract

A rapid, simple, and sensitive method was developed for the determination of three imidazole derivatives based on their quenching effect on bis(2,4,6-tricholorophenyl) oxalate (TCPO)–H₂O₂ chemiluminescence (CL) in the presence of rhodamine 6 G. Conditions affecting CL intensity were studied. With sodium dodecyl sulfate (SDS) as the additional agent, the relative standard deviation (RSD) was more twice the RSD without SDS. Under optimal conditions, good linear ranges were obtained from 1.0 × 10^?4 g/mL to 1.0 × 10^?6 g/mL, 1.0 × 10^?5 g/mL to 1.0 × 10^?7 g/mL, and 1.0 × 10^?5 g/mL to 7.0 × 10^?7 g/mL, with detection limits of 8.0 × 10^?7 g/mL, 7.0 × 10^?8 g/mL, and 8.0 × 10^?8 g/mL (S/N = 3) for hydrobenzole hydrochloride, thiamazole, and mizolastine, respectively. The RSDs for 13 consecutive injections of 1.0 × 10^?6 g/mL hydrobenzole hydrochloride, thiamazole, and mizolastine were 1.89%, 1.47%, and 1.69%, respectively, and satisfied results were obtained with the method applied to their pharmaceutical preparations. The possible CL mechanism was simply discussed.     

Determination of Methimazole and Carbimazole Using Polarography and Voltammetry

Abstract

Anodic waves of methimazole (I) (1-methylimidazole-2-thiol) and carbimazole (II) (1-ethoxycarbonyl-3-methyl-2-thio-4-imidazoline) on mercury electrodes correspond to mercury salt formation. Both compounds form in the thiono form a soluble complex at pH < 6, compound (I) at higher pH-values a slightly soluble salt of the thiol form. Electrode processes involving the thiol form are complicated by adsorption. Oxidation at solid electrodes occurs only at potentials more than 0.5 V more positive. For compound (I) spectrophotometry indicated pK_a=12.0 ± 0.2. By d.c. polarography in 0.1 M H₂SO₄ containing 10% ethanol the determination of both compounds is possible between 4 × 10^? and 1 × 10^?3 M, by differential pulse polarography between 1 × 10^? and 1 × 10^?4 M, by differential pulse voltammetry at HMDE between 5 × l0^?7 and 6 × 10^? M.     

Synthesis and physicochemical properties of fac-[Re(CO)3(κ2-N,N-dpkfah)Cl], dpkfah=di-2-pyridyl ketone 2-furoic acid hydrazone: the molecular structure of fac-[Re(CO)3(κ2-N,N-dpkfah)Cl] · acetone

Reaction between [Re(CO)₅Cl] and di-2-pyridyl ketone 2-furoic acid hydrazone (dpkfah) (1) in refluxing toluene gave fac-[Re(CO)₃(κ²-N,N-dpkfah)Cl] (2). Spectroscopic and electrochemical measurements disclosed sensitivity of 2 to its surroundings. ¹H-NMR measurements showed that the amide proton exchanged with solvent protons, and its chemical shift is solvent and temperature dependent, while the chemical shifts of aromatic protons are solvent and temperature independent. Electronic absorption spectra of 2 divulged two intra-ligand charge transfer transitions (ILCT) in protophilic solvents and a single ILCT transition in non-protophilic solvents. Optical measurements on protophilic solutions of 2 established an equilibrium between 2 and its conjugate base, fac-[Re(CO)₃(κ²-N,N-dpkfah-H)Cl]^? (3). Thermo-optical measurements confirmed that the interconversion between 2 and 3 and gave ΔG ^ø values of ?26.48 and 22.99?kJ?mol^?1, respectively, for the protonation of DMF and DMSO by 2. Optosensing measurements showed that [MCl₂] (M?=?Zn, Cd, or Hg) in concentrations as low as 1.00?×?10^?7?mol?L^?1 can be detected and determined using protophilic solutions of 2. Electrochemical measurements showed 2 to be more stable in CH₃CN than DMF. Single-crystal X-ray structural analysis on fac-[Re(CO)₃(κ²-N,N-dpkfah)Cl]?·?acetone (4) obtained from an acetone solution of 2 confirmed the solvent–complex interaction and revealed two symmetry-independent molecules in the asymmetric unit. The extended structure of 4 disclosed parallel stacks connected via a network of classic and non-classic hydrogen bonds.     

Determination of thiocyanate ions at nanolevel in real samples using coated graphite electrode based on synthesised macrocyclic Zn(II) complex

The electrode characteristics and selectivities of PVC-based thiocyanate selective polymeric membrane electrode (PME) incorporating the newly synthesized zinc complex of 6,7:14,15-Bzo₂-10,11-(4-methylbenzene)-[15]-6,8,12,14-tetraene-9,12-N₂-1,5-O₂ (I ₁ ) and zinc complex of 6,7:14,15-Bzo₂-10,11-(4-methylbenzene)-[15]-6,14-diene-9,12-dimethylacrylate-9,12-N₂-1,5-O₂ (I ₂ ) are reported here. The best response was observed with the membrane having a composition of I₂:PVC:o-NPOE:HTAB in the ratio of 6:33:59:2 (w/w; milligram). This electrode exhibited Nernstian slope for thiocyanate ions over working concentration range of 4.4 × 10⁻⁷ to 1.0 × 10⁻² mol L⁻¹ with detection limit of 2.2 × 10⁻⁷ mol L⁻¹. The performance of this electrode was compared with coated graphite electrode (CGE), which showed better response characteristics w.r.t Nernstian slope 59.0 ± 0.2 mV decade⁻¹ activity, wide concentration range of 8.9 × 10⁻⁸ to 1.0 × 10⁻² mol L⁻¹ and detection limit of 6.7 × 10⁻⁸ mol L⁻¹. The response time for CGE and PME was found to be 8 and 10 s, respectively. The proposed electrode (CGE) was successfully applied to direct determination of thiocyanate in biological and environmental samples and also as indicator electrode in potentiometric titration of SCN⁻ ion.     

Separation of the Oxyanions of Re(VII), Mo(VI), Cr(VI), W(VI), and V(V) from a Multicomponent Solution at pH 6 by foam Fractionation

Abstract

An experimental investigation is presented of the foam separation of the oxyanions of Re(VII), Mo(VI), Cr(VI), W(VI), and V(V). The pH 6.0, multicomponent aqueous solutions are 1.0 × 10 ^?6 M in each metal. The effect of chloride competition with the metal oxyanions for the cationic surfactant is determined with NaCl concentrations up to 0.3 M. With proper NaCl concentration adjustments, V(V) can be separated completely from the other four metals, and Re(VII) and Mo(VI) from the other three. Pulsed surfactant dosage is investigated for 1.0 × 10 ^?6 M Mo(VI) solutions at pH 6.0 and 3.1.     

A ratiometric fluorescent probe for zinc ions based on the quinoline fluorophore

A ratiometric fluorescent zinc probe 1 of carboxamidoquinoline with a carboxylic acid group was designed and synthesised. Probe 1 exhibits high selectivity for sensing Zn²⁺; about a 13-fold increase in fluorescence emission intensity and an 82?nm red-shift of fluorescence emission are observed upon binding Zn²⁺ in EtOH/H₂O (1?:?1, V/V) solution. The ratiometric fluorescence response is attributed to the 1?:?1 complex formation between probe 1 and Zn²⁺ which has been utilised as the basis for the selective detection of Zn²⁺. The analytical performance characteristics of the proposed Zn²⁺-sensitive probe were investigated. The linear response range covers a concentration range of Zn²⁺ from 2.0?×?10^?6 to 5.0?×?10^?5?mol?L^?1 and the detection limit is 2.7?×?10^?7?mol?L^?1. The determination of Zn²⁺ in both tap and river water samples shows satisfactory results.