Alizarin-modified sulfonate carbon nanoparticles in vanadium sensing

The adsorption processes of alizarin onto hydrophilic carbon nanoparticles (Emperor 2000?) are investigated. The significant increase in voltammetric responses for pre-adsorbed alizarin compared with those for solution confirms high affinity of alizarin to carbon nanoparticles (possibly due to π–π stacking interaction between aromatic rings of alizarin and surface-sulfonated carbon nanoparticles). To obtain the optimum of adsorption conditions, the effects of pH, agitation rate, and adsorption time are investigated. Under square wave voltammetry conditions, the peak current for the reduction of alizarin shows a linear relationship with concentration in the range from 2.0 to 10.0 nM. The limit of detection is estimated 5.8?×?10^?9 mol L^?1. Next, alizarin is applied as a receptor for sensing of trace vanadium in acetate buffer pH 5. Linear calibration curves are obtained for vanadium in the range of 1.0?×?10^?6 to 1.0?×?10^?4 mol L^?1 and the limit of detection is estimated 9.6?×?10^?8 mol L^?1. Determination of vanadium in real samples such as sea and tap water is demonstrated.     

Fabrication of a new nanocomposite modified carbon paste Al<Superscript>3+</Superscript>-ion selective electrode based on <Emphasis Type="Italic">N,N</Emphasis>′-dipyridoxyl (1,2-cyclohexanediamine) (PYCA) as an active material

Construction and feature of a nanocomposite modified carbon paste electrode for aluminum(III) ion determination based on N,N′-dipyridoxyl (1,2-cyclohexanediamine) (PYCA) as a novel selector material will be covered by this paper. The optimum composition, Nernstian slope/linear range/detection limit in the forms of calibration graph, response time, utilizable pH range, repeatability and precision of measurements of the aluminum(III) ion using the new fabricated Al³⁺-CPE was evaluated. The optimal composition which performed over Al⁺³ ion concentration range 1.0 × 10^?8 mol L^?1–1.0 × 10^?1 mol L^?1 with near-Nernstian slope equal 20.9 ± 0.2 mV decade^?1 and low detection limit about 5.0 × 10^?9 mol L^?1, was formed of ionophore (PYCA 3 %), binder (paraffin oil 30 %), modifier [multi-wall carbon nanotubes (MWCNTs) 1 %] & [Nanosilica (NS) 0.5 %], and inert matrix (graphite powder 65.5). The request time to give rise Nernstian response of electrode for concentrations from 1.0 × 10^?8 mol L^?1 to 1.0 × 10^?1 mol L^?1 of Al³⁺ ion solution was estimated about ~6 s. The new Al³⁺-CPE was applied in pH range 2.0–5.0 with no consequential change in potential response. To verify the selectivity of electrode toward aluminum(III) ion in the presence of different metallic cations, matched potential method was used. The obtain results in analytical applications reflect the excellent ability of this electrode to play the role as endpoint indicator electrode in both titration and direct potentiometric measurements.     

Electrochemiluminescence of SDBS‐Ru(bpy)32+‐CPM System and Its Application

When the concentration of dodecyl benzene sulfonic acid sodium salt (SDBS) is 0.7 mmol·L^?1, the electrochemical and electrochemiluminescence (ECL) intensity of Ru(bpy)₃²⁺‐chlorpheniramine maleate (CPM) system at the Au electrode were studied. The results showed that compared with the absence of SDBS, enhancement of the ECL intensity was 14‐fold at Au electrode. Base on this, an ECL method was established for efficient and simple determination of CPM at Au electrode. Under the optimum experimental condition, the enhanced ECL intensities had good linear relationship with the concentration of CPM in the range of 1.0×10^?4–1.0×10^?7 mol·L^?1, and a linear regression equation was obtained as follows: I (counts)=48.805×10⁶c+394.03 (r=0.9975), the detection limit for CPM was 1.4×10^?8 mol·L^?1. The RSD for 5 times determinations of 1.0×10^?5 mol·L^?1 CPM was 3.2%. The results of recovery test were between 96.3%–102.5%, and the RSD of recovery test (n=5) was 2.7%. In addition, eleven kinds of tertiary amines‐Ru(bpy)₃²⁺ systems were investigated in the absence and presence of SDBS. The results showed that the enhancement of SDBS on ECL intensity of tertiary amines‐Ru(bpy)₃²⁺ systems was universal.     

Simultaneous Analysis of Sugars and Polyphenols in Tobacco by CZE with Amperometric Detection Based on a Cu2O/MWCNT-COOH Composite Electrode

A composite electrode was fabricated from Cu₂O powder, carboxyl-functionalized multi-wall carbon nanotubes (MWCNT-COOH), and paraffin oil in the proportions 51:17:32 (w/w). This composite electrode was used for amperometric detection (CZE–AD) in simultaneous capillary zone electrophoretic analysis of chlorogenic acid, rutin, sucrose, glucose, mannose, and fructose in tobacco samples. Under the optimum conditions, the six analytes could be separated in 100 mmol L^?1 NaOH buffer within 30 min. Good linearity was achieved in the range 1 × 10^?7–1 × 10^?4 mol L^?1 for the two polyphenols and 5 × 10^?6–1 × 10^?3 mol L^?1 for the four sugars. The detection limits (S/N = 3) for the polyphenols and sugars were as low as 10^?8 mol L^?1 and 10^?6 mol L^?1, respectively.     

Application of an ampholine‐functionalized hybrid organic–inorganic silica material for the SPE of aromatic amines

An SPE cartridge based on an ampholine‐functionalized hybrid organic–inorganic silica sorbent has been adopted for the analysis of aromatic amines including 4‐aminobiphenyl, benzidine, 2‐naphthylamine, p‐chloroaniline, 2,4,5‐trimethylaniline, and 3,3′‐dichlorobenzidine. Crucial variables governing the extraction efficiency of the material such as the pH of sample, sample loading volume, solvent used for elution, and elution volume have been thoroughly optimized. The adsorption capacities for the six aromatic amines ranged from 0.17 to 1.82 μg/mg. The recoveries of aromatic amines spiked in textile samples ranged from 78.9 to 103.0%, with RSDs of 1.1–11.9% (n = 3). Moreover, the extraction efficiency of the ampholine‐functionalized hybrid organic–inorganic silica sorbent was at least comparable with that of Oasis WCX.     

Voltammetric Determination of Methylparaban in Cosmetics Using a Multi-Wall Carbon Nanotubes/Nafion Composite Modified Glassy Carbon Electrode

A novel voltammetric sensor using multi-wall carbon nanotubes (MWNTs) coupled with Nafion modified glassy carbon electrode (GCE) was developed for the detection of methylparaben (MP). The sensor exhibited good electrocatalytic activity toward the oxidation of MP in the phosphate buffer solution (PBS, pH 6.5). It displayed good sensitivity, repeatability, reproducibility, and long-term stability. Under the optimized conditions, the anodic peak current was linear with the concentration of MP in the range of 3 × 10^?6 mol L^?1 to 1 × 10^?4 mol L^?1. The detection limit was 1 × 10^?6 mol L^?1. The proposed method was successfully applied to determine MP in cosmetics with satisfactory results.     

Static and Hydrodynamic Monitoring of Citalopram Based on its Electro-oxidation Behavior at a Glassy-Carbon Surface

Abstract

The electrooxidative behavior of citalopram (CTL) in aqueous media was studied by cyclic voltammetry (CV) and square-wave voltammetry (SWV) at a glassy-carbon electrode. The electrochemical behaviour of CTL involves two electrons and two protons in the irreversible and diffusion controlled oxidation of the tertiary amine group. The maximum analytical signal was obtained in a phosphate buffer (pH = 8.2). For analytical purposes, an SWV method and a flow-injection analysis (FIA) system with amperometric detection were developed. The optimised SWV method showed a linear range between 1.10 × 10^?5–1.20 × 10^?4 mol L^?1, with a limit of detection (LOD) of 9.5 × 10^?6 mol L^?1. Using the FIA method, a linear range between 2.00 × 10^?6–9.00 × 10^?5 mol L^?1 and an LOD of 1.9 × 10^?6 mol L^?1 were obtained. The validation of both methods revealed good performance characteristics confirming applicability for the quantification of CTL in several pharmaceutical products.     

Determination of Polyethylene Glycol Monoester Acrylate and Polyethylene Glycol Diester Acrylate Using Reversed-Phase High-Performance Liquid Chromatography

A procedure was developed for the determination of polyethylene glycol monoester acrylate (PEGMA) and polyethylene glycol diester acrylate (PEGDA) by reversed-phase high performance liquid chromatographic (RP-HPLC) with UV detector. Sample was well separated on an SinoChrom ODS-BP (C-18) column (200 × 4.6 mm i.d., 5 μm) with mobile phases composed of acetonitrile-phosphate buffer solution (0.05 mol · L^?1 pH = 6.86) in the ratio of 42:58 (v/v). The PEGMA and PEGDA were detected by UV detector at 205 nm, and quantitatively analyzed with an external standard of methyl acrylate. For PEGMA, the linear response ranged from 0.40 × 10^?5 mol · L^?1 to 2.00 × 10^?3mol · L^?1 (r² > 0.999), the detection limit was 0.12 × 10^?5 mol · L^?1, the recovery rate was found to be 93.4%–99.7%. For PEGDA, the linear response ranged from 0.20 × 10^?5 mol · L^?1 to 1.00 × 10^?3mol · L^?1 (r² > 0.999), the detection limit was 0.04 × 10^?5 mol · L^?1, the recovery rate was found to be 99.1% ～ 105.8%. This quantitative method can also be used in the HPLC analysis of other α,β-unsaturated esters.     

Rapid Determination of Minocycline in Pharmaceutical Formulations and Human Urine/Serum Samples Based on the Minocycline-Europium-Sodium Dodecylbenzene Sulfonate Luminescence System

Abstract

A new luminescence method based on the minocycline (MNC)-europium (Eu³⁺)-sodium dodecylbenzene sulfonate (SDBS) system was developed for the determination of MNC. SDBS formed a ternary complex with MNC-Eu³⁺ and significantly enhanced the luminescence intensity of Eu³⁺. The enhanced luminescence intensity showed a good linear relationship with the concentration of MNC over the range of 4.0 × 10^?7 ～ 1.0 × 10^?5 mol L^?1 with a detection limit of 2.0 × 10^?8 mol L^?1. This method is rapid and sensitive, and has been successfully applied for the determination of MNC in capsules and human urine/serum samples. The luminescence mechanism is also studied.     

Voltammetric Determination of Dopamine in Human Serum and Urine at a Glassy Carbon Electrode Modified by Cysteic Acid Based on Electrochemical Oxidation of L ‐cysteine

Abstract

The voltammetric behavior of dopamine was studied at a glassy carbon electrode modified by cysteic acid, based on electrochemical oxidation of L ‐cysteine. The modified electrode showed strong electrocatalytic activity towards dopamine and good selectivity. In a phosphate buffer solution (pH 7.4), the anodic peak current obtain from the differential pulse voltammetry of dopamine was linearly dependent on its concentration in the range of 5×10^?9 to 4.0×10^?6mol · L^?1, with a detection limit of 2×10^?9mol · L^?1. The low‐cost modified electrode had been applied to the determination of dopamine in human serum and urine samples with satisfactory results.     

Amperometric Nitric Oxide Sensor Based on Poly(Thionine)/Nafion‐Modified Electrode and Its Application in Monitoring Nitric Oxide Release from Rat Kidney

Abstract

A novel amperometric nitric oxide (NO) sensor based on a glassy carbon electrode modified with thionine and Nafion films has been developed. The oxidation peak current of NO increased significantly at the poly(thionine)/Nafion‐modified glassy carbon electrode (GCE), which can be used for the detection of NO. The oxidation peak current was linear with the concentration of nitric oxide over the range from 3.6×10^?7 to 6.8×10^?5 mol · L^?1, and the detection limit was 7.2×10^?8 mol · L^?1. This nitric oxide sensor showed high selectivity to nitric oxide determination, and some potential interference could be eliminated effectively. The nitric oxide sensor has been applied to monitor NO release from rat kidney stimulated by L‐arginine. The results indicated the applicability of the NO sensor to biomedical samples.     

Simultaneous Detection of Dopamine and Uric Acid under Coexistence of Ascorbic Acid with DNA/Pt Nanocluster Modified Electrode

A novel biosensor by electrochemically codeposited Pt nanoclusters and DNA film was constructed and applied to detection of dopamine (DA) and uric acid (UA) in the presence of high concentration ascorbic acid (AA). Scanning electron microscopy and X‐ray photoelectron spectroscopy were used for characterization. This electrode was successfully used to resolve the overlapping voltammetric response of DA, UA and AA into three well‐defined peaks with a large anodic peak difference (ΔE_pa) of about 184 mV for DA and 324 mV for UA. The catalytic peak current obtained from differential pulse voltammetry was linearly dependent on the DA concentration from 1.1× 10^?7 to 3.8×10^?5 mol·L^?1 with a detection limit of 3.6×10^?8 mol·L^?1 (S/N=3) and on the UA concentration from 3.0×10^?7 to 5.7×10^?5 mol·L^?1 with a detection limit of 1.0×10^?7 mol·L^?1 with coexistence of 1.0×10^?3 mol·L^?1 AA. The modified electrode shows good sensitivity and selectivity.     

Determination of Catechol by a Laccase Biosensor Based on Silica-Modified Zirconia Nanoparticles

A promising nanotechnological material, zirconia nanoparticles modified with SiO₂, was used as a medium for the immobilization of laccase to construct a novel biosensor that exhibits sensitive amperometric response to catechol in 0.1 mol · L^?1 phosphate buffer (pH 6.0) using cyclic voltammetry. The linear response to catechol was from 1.0 × 10^?6 to 1.0 × 10^?4 mol · L^?1 and the detection limit was 3.5 × 10^?7 mol · L^?1 at a signal-to-noise ratio of 3. The biosensor exhibited good stability, precision, and few interferences.     

Voltammetric determination of 17α-ethinylestradiol hormone in supply dam using BDD electrode

In this work, a simple method for electroanalytical determination of 17α-ethinylestradiol (EE2) hormone in natural waters was developed using a boron-doped diamond electrode (BDD). The analyses were performed using square wave voltammetry and the parameters were optimized. The results showed a well-defined irreversible oxidation peak (BR buffer 0.1 mol L^?1, pH 8.0) at +0.65 V (vs. Ag/AgCl). The voltammetric results showed also that the oxidation process is controlled by adsorption of species and indicated that there are two electrons involved. The obtained analytical curves for 17α-ethinylestradiol presented good linearity in the concentration range 9.9?×?10^?7 to 5.2?×?10^?6 mol L^?1 in utlrapure water and 7.9?×?10^?7 to 5.2?×?10^?6 mol L^?1 in natural water samples (supply dam). Detection limits (DL) obtained were between 2.4?×?10^?7 and 7.5?×?10^?7 mol L^?1 and quantification limits (QL) between 7.9?×?10^?7 and 2.5?×?10^?6 mol L^?1. The recovery experiments showed values between 86 and 114 % for spiked samples thus indicating the applicability of the electroanalytical methodology to quantify 17α-ethinylestradiol directly in natural water of supply Dam (Billings Dam in Diadema-SP. Brazil), without any preconcentration or derivatization.     

Electrocatalytic Oxidation of Hydroquinone at Poly(crystal-violet) Film–Modified Electrode and Its Selective Determination in the Presence of o-Hydroquinone and m-Hydroquinone

Abstract

A stable poly(crystal-violet) (PCV) electroactive film was electrodeposited on a glassy carbon electrode (GCE). The redoxation of hydroquinone showed a pair of well-defined peaks on a PCV electrode with a potential difference of 30 mV, which is 120 mV less than that obtained on the GCE. At optimal conditions, the PCV electrode linearly responded to the hydroquinone in the range of 4 × 10^?6 mol · L^?1 to 3.2 × 10^?3 mol · L^?1 and a detection limit of 8 × 10^?8 mol · L^?1 was obtained. The separations of the oxidation peak potentials between hydroquinone and the coexisting o-hydroquinone and m-hydroquinonewere 100 mV and 430 mV, respectively, which allows their simultaneous determination. The detection of hydroquinone in artificial sewage water was demonstrated with satisfactory results.     

A Direct Chemiluminescence Method for the Determination of Prulifloxacin Using Tris-(4,7-Diphenyl-1,10-Phenanthrolinedisulfonic Acid) Ruthenium(II)–Cerium(IV) System

Abstract

A simple, rapid, injection chemiluminescence method is described for the determination of prulifloxacin, a commonly used antibiotic. A strong chemiluminescence signal was detected when a mixture of the analyte and tris-(4,7-diphenyl-1,10-phenanthrolinedisulfonic acid)ruthenium(II) was injected into cerium(IV) sulfate. The chemiluminescence signal is proportional to the concentration of prulifloxacin in the range 4.0 × 10^?8–9.0 × 10^?6 mol L^?1. The detection limit is 1.0 × 10^?8 mol L^?1, and the relative standard deviation is 2.2% (n = 11) for the determination of 8.0 × 10^?7 mol L^?1 prulifloxacin. The proposed method was successfully applied to the determination of prulifloxacin in pharmaceutical preparations in capsules, spiked serum, and urine samples.     

The Preparation and Application of Bismuth (III) Ion‐Selective Electrode Based on Nanoparticles of Bismuth Sulfide

Abstract

Nanoparticles of bismuth sulfide were prepared in the organic phase and the optimum synthesis conditions for the nanoparticles were studied in detail. Transmission electron microscope (TEM) results indicated that the size distribution of the nanoparticles was proportional with an average diameter of 46.4 nm. A novel bismuth ion‐selective electrode (ISE) was prepared by dispersing the bismuth sulfide nanoparticles in polyvinylchloride (PVC) membrane. The linear range was 1.00×10^?8～1.00×10^?4 mol L^?1 and the detection limit was 8.10×10^?9 mol L^?1. The response of the electrode was fast with quite reasonable reproducibility and stability. It was used to determine bismuth in three kinds of stomach medicines and the results were in good agreement with the flame atomic absorption spectrometry (FAAS) method.     

Preparation and Application of La(OH)3 Nanoparticles Self‐Assembled Film Modified Electrode

Abstract

La(OH)₃ nanoparticles were successfully prepared with the sol‐gel method, and the preparation of a glassy carbon electrode modified by La(OH)₃ nanoparticles was investigated. The modified electrode shows an excellent electrocatalytic activity for hydroquinone. The anodic and cathodic overpotentials are reduced by ca. 143 mV and 83 mV, respectively, compared with those obtained with a bare glassy carbon electrode. According to the electrochemistry response, we set up a new method to determinate hydroquinone. The catalytic anodic current response of differential pulse voltammogram increases linearly with hydroquinone concentrations from 2.7×10^?7 to 6.5×10^?4 mol L^?1 with a detection limit of 6.0×10^?8 mol L^?1. The recovery of hydroquinone in a simulative sample is satisfactory, especially for its elimination of the interference of 1,2‐benzenediol (pyrocatechol) and 1,3‐benzenediol (m‐dihydroxybenzene). The method is simple, quick, and sensitive.     

Peroxyoxalate Chemiluminescence Based on Fluorescent Conjugated Polymer for the Determination of Triton X-100

A novel peroxyoxalate chemiluminescence system has been designed for the determination of Triton X‐100 (TX‐100), in which a hydrophobic fluorescent conjugated polymer, poly[2,5‐bisnonyloxy‐1,4‐phenylene‐ethynylene‐9,10‐anthrylene] (PPEA) was employed as a fluorophor. A strong enhanced intensity of chemiluminescence (CL) was observed in the presence of TX‐100, due to the improved emission efficiency of PPEA in the presence of TX‐100. Under optimum conditions, the detection range of Triton X‐100 is between 1.0×10^?7 and 1.0× 10^?4 mol·L^?1, with a detection limit at 6.0×10^?8 mol·L^?1. The relative standard deviation is 2.4% (n=6) for 1.0×10^?6 mol·L^?1 Triton X‐100. This method provides satisfying results in the detection of TX‐100 in nature water and biological samples with high sensitivity and wide linear range.     

RP-LC Determination of Residual Monomers in Polycarboxylate Superplasticizers

A procedure was developed for the determination of residual monomers in polycarboxylate superplasticizer by reversed-phase high performance liquid chromatography. Seven kinds of residual monomers were quantitatively determined on a SinoChrom ODS-BP (C18) column and UV detector at 205 nm. The mobile phases which were used to determine micromolecular monomers were composed of acetonitrile and phosphate buffer solution (0.05 mol L^?1, pH = 3) in the ratio of 8:92 (v/v). While the mobile phases for long side-chain monomers testing were composed of acetonitrile and phosphate buffer solution (0.05 mol L^?1, pH = 6.5) in the ratio of 40:60 (v/v). The linear response ranged from 4.0 × 10^?6?C2.0 × 10^?3 mol L^?1. The detection limit was 0.12 × 10^?5?C0.8 × 10^?5 mol L^?1. Determination of real samples showed that relative standard deviation of high conversion rate samples was 3.1?C8.7% and standard addition recovery ratio was 91.5?C102.8%. While the relative standard deviation of low conversion rate samples was less than or close to 1% and the standard addition recovery ratio was 96.3?C103.1%.