HPLC-UV Assay Method for Clindamycin Palmitate Hydrochloride as Drug Substance and Oral Solution

Abstract

A simple isocratic high performance liquid chromatography (HPLC) method was developed for the determination of Clindamycin palmitate hydrochloride in drug substance and oral solutions. The XTerra RP18 250 mm × 4.6 mm × 5 µ column was used as stationary phase, and the mobile phase was a 0.5% solution of Triethylamine in a 1:9 (v/v) water:methanol mixture adjusted to pH 5.0 with orthophosphoric acid. The detector wavelength was selected at 210 nm and flow rate was maintained at 1.50 ml/min. Forced degradation studies were performed for drug substance, 75 mg/5 ml oral solution and placebo, using acid, base, oxidation, temperature, humidity, and photolytic degradation to demonstrate the specificity of the method. The developed method was validated as per ICH method validation guidelines.     

A Stability-Indicating LC Assay Method for Bicalutamide

A stability-indicating HPLC method for the quantitative determination of Bicalutamide is described. Bicalutamide is a nonsteroidal antiandrogen and is an oral medication that is used for treating prostate cancer. Separation was achieved on a Waters Symmetry shield RP18 HPLC column using a mobile phase consists of a mixture of phosphate buffer (Solvent A) and organic modifier acetonitrile (Solvent B). Degradation studies were performed on bulk samples of bicalutamide using acid (0.5 N methanolic hydrochloric acid), base (0.5 N methanolic sodium hydroxide), oxidation (10% v/v methanolic hydrogen peroxide), heat (60 °C) and UV light (254 nm). Degradation was observed under base hydrolysis to give the starting material used during the synthesis of bicalutamide. The degraded samples were assayed and gave a mass balance greater than 99.5%, thus proving the stability-indicating power of the developed method. The method was validated with respect to linearity, accuracy, precision and robustness.     

Validated Stability-Indicating GC-MS Method for Characterization of Forced Degradation Products of Trans-Caffeic Acid and Trans-Ferulic Acid

When dealing with simple phenols such as caffeic acid (CA) and ferulic acid (FA), found in a variety of plants, it is very important to have control over the most important factors that accelerate their degradation reactions. This is the first report in which the stabilities of these two compounds have been systematically tested by exposure to various different factors. Forced degradation studies were performed on pure standards (trans-CA and trans-FA), dissolved in different solvents and exposed to different oxidative, photolytic and thermal stress conditions. Additionally, a rapid, sensitive, and selective stability-indicating gas chromatographic-mass spectrometric method was developed and validated for determination of trans-CA and trans-FA in the presence of their degradation products. Cis-CA and cis-FA were confirmed as the only degradation products in all the experiments performed. All the compounds were perfectly separated by gas chromatography (GC) and identified using mass spectrometry (MS), a method that additionally elucidated their structures. In general, more protic solvents, higher temperatures, UV radiation and longer storage times led to more significant degradation (isomerization) of both trans-isomers. The most progressive isomerization of both compounds (up to 43%) was observed when the polar solutions were exposed to daylight at room temperature for 1 month. The method was validated for linearity, precision as repeatability, limit of detection (LOD) and limit of quantitation (LOQ). The method was confirmed as linear over tested concentration ranges from 1−100 mg L⁻¹ (r²s were above 0.999). The LOD and LOQ for trans-FA were 0.15 mg L⁻¹ and 0.50 mg L⁻¹, respectively. The LOD and LOQ for trans-CA were 0.23 mg L⁻¹ and 0.77 mg L⁻¹, respectively.     

A Stability-Indicating LC Assay Method for Pemetrexed Disodium

This present work describes the development of a stability-indicating high performance liquid chromatographic method for the quantitative determination of pemetrexed disodium. Pemetrexed disodium is an antifolate antineoplastic agent that exerts its action by disrupting folate-dependent metabolic processes essential for cell replication. The chromatographic separation was achieved on an ACE 3 C18 HPLC column using a mobile phase consisting of a mixture of buffer (solvent A) and organic modifier acetonitrile (solvent B). Forced degradation studies were performed on bulk sample of pemetrexed disodium using acid (0.5 N hydrochloric acid), base (0.5 N sodium hydroxide), oxidation (10% v/v hydrogen peroxide), heat (60 °C) and UV light (254 nm). Degradation of the drug substance was observed in base hydrolysis. Degradation product formed under acid and base hydrolysis was found to be starting material. The stressed samples were assayed using the developed LC method and the mass balance found was close to 99.5%, thus proving its stability-indicating power. The developed method was validated with respect to linearity, accuracy, precision and robustness.     

A Stability-Indicating LC Method for Assay of Topotecan Hydrochloride

This paper describes the development of a stability-indicating high-performance liquid chromatographic (HPLC) method for quantitative determination of topotecan hydrochloride, a semi-synthetic derivative of camptothecin and anti-tumor drug with topoisomerase I-inhibitory activity. Chromatographic separation was achieved on a C₁₈ column with a mixture of phosphate buffer and acetonitrile as mobile phase. The method was validated for linearity, accuracy, precision, and robustness. Forced degradation studies were performed by treating bulk samples of topotecan hydrochloride with acid (0.5 M hydrochloric acid), base (0.5 M sodium hydroxide), oxidizing agent (10% v/v hydrogen peroxide), heat (60 °C), and UV light (254 nm).     

Stability-Indicating LC Determination of Nitazoxanide in Bulk Drug and in Pharmaceutical Dosage Form

A novel stability-indicating high-performance liquid chromatographic assay method was developed and validated for quantitative determination of nitazoxanide in bulk drugs and in pharmaceutical dosage form in the presence of degradation products generated from forced decomposition studies. An isocratic, reversed phase LC method was developed to separate the drug from the degradation products, using an Ace5- C18 (250 mm × 4.6 mm, 5 μm) column, and 50 mM ammonium acetate (pH 5.5 by acetic acid) and acetonitrile (55:45 v/v) as a mobile phase. The detection was carried out at a wavelength of 240 nm. The nitazoxanide was subjected to stress conditions of hydrolysis (acid, base), oxidation, photolysis and thermal degradation. Degradation was observed for nitazoxanide in base, acid and in 30% H₂O₂ conditions. The drug was found to be stable in the other stress conditions attempted. The degradation products were well resolved from the main peak. The percentage recovery of nitazoxanide was from (100.55 to 101.25%) in the pharmaceutical dosage form. The developed method was validated with respect to linearity, accuracy (recovery), precision, system suitability, specificity and robustness. The forced degradation studies prove the stability indicating power of the method.     

The International Conference on Harmonisation Guidance in Practice: Stress Degradation Studies on Lamivudine and Development of a Validated Specific Stability-Indicating HPTLC Assay Method

A sensitive, selective, precise and stability-indicating high-performance thin-layer chromatographic method of analysis of lamivudine both as a bulk drug and in formulations was developed and validated. The solvent system consisted of carbon tetrachloride – methanol – chloroform - acetonitrile (7.0: 3.0: 2.0: 1.5, v/v/v/v). Densitometric analysis of lamivudine was carried out in the absorbance mode at 275 nm. This system was found to give compact spots for lamivudine (R_F value of 0.36 ± 0.02) following double development of chromatoplates with the same mobile phase. Lamivudine was subjected to acid and alkali hydrolysis, oxidation, dry heat and wet heat treatment and photo degradation. The drug undergoes degradation under acidic, basic conditions, oxidation, wet heat and photo degradation. Also the degraded products were well resolved from the pure drug with significantly different R_F values. Linearity was found to be in the range of 50 – 1000 ng spot^–1 with significantly high value of correlation coefficient. The linear regression analysis data for the calibration plots showed good linear relationship with r² = 0.9994 ± 0.05 in the working concentration range of 300 ng spot^–1 to 1000 ng spot^–1. The mean value of slope and intercept were 0.11 ± 0.08 and 10.47 ± 1.21, respectively. The method was validated for precision, robustness and recovery. The limit of detection and quantitation were 15 ng spot^–1 and 40 ng spot^–1 respectively. As the method could effectively separate the drug from its degradation products, it can be employed as a stability indicating one. Moreover, the proposed HPTLC method was utilized to investigate the kinetics of acid degradation process. Arrhenius plot was constructed and activation energy was calculated.     

A Validated Stability Indicating RPLC Method for Tazarotene

A simple, isocratic, rapid and accurate reversed phase high performance liquid chromatography method was developed for the quantitative determination of tazarotene. The developed method is also applicable for the related substance determination in bulk drugs. The chromatographic separation was achieved on a Hypersil C18 (250 mm × 4.6 mm 5 μm) column using water pH 2.5 with orthophosphoric acid:acetonitrile (15:85, v/v) as a mobile phase. The chromatographic resolutions between tazarotene and its potential impurity A and B were found greater than three. The limit of detection and limit of quantification of impurities were found to be 25 and 75 ng mL⁻¹. The percentage recovery of impurities in bulk drug sample was ranged from 96.8 to 103.5.The percentage recovery of tazarotene in bulk drug sample was ranged from 98.4 to 100.9. The developed RPLC method was validated with respect to linearity, accuracy, precision and robustness.     

Stability-Indicating High-Performance Thin-Layer Chromatographic Method for Simultaneous Estimation of the Active Pharmaceutical Ingredients Metolazone and Spironolactone

JPC – Journal of Planar Chromatography – Modern TLC - This work represents the validation of a stability-indicating thin-layer chromatographic technique for the simultaneous estimation...     

Development of a Validated Stability-Indicating High-Performance Thin-Layer Chromatographic Method for the Quantification of Levetiracetam

JPC – Journal of Planar Chromatography – Modern TLC - Levetiracetam (LT) is an FDA-approved orally active anticonvulsant drug. A high-performance thin-layer chromatographic (HPTLC)...     

Development of a Validated Stability-Indicating LC Method for Nitazoxanide in Pharmaceutical Formulations

A reversed-phase liquid chromatographic (LC) method was developed for the assay of nitazoxanide (NTZ) in solid dosage formulations. An isocratic LC separation was performed on a Phenomenex Synergi Fusion C₁₈ column (250 mm × 4.6 mm, i.d., 4 μm particle size) using a mobile phase of 0.1% o-phosphoric acid solution, pH 6.0: acetonitrile (45:55, v/v) at a flow rate of 1.0 mL min⁻¹. Detection was achieved with a photodiode array detector at 240 nm. The detector response for NTZ was linear over the concentration range from 2 to 100 μg mL⁻¹ (r = 0.9999). The specificity and stability-indicating capability of the method were proved using stress conditions. The RSD values for intra-day precision were less than 1.0% for tablets and powder for oral suspension. The RSD values for inter-day precision were 0.6 and 0.7% for tablets and powder for oral suspension. The accuracy was 100.4% (RSD = 1.8%) for tablets and 100.9% (RSD = 0.3%) for powder for oral suspension. The limits of quantitation and detection were 0.4 and 0.1 μg mL⁻¹. There was no interference of the excipients on the determination of the active pharmaceutical ingredient. The proposed method was precise, accurate, specific, and sensitive. It can be applied to the quantitative determination of drug in tablets and powder for oral suspension.     

A Stability-Indicating LC Assay and Degradation Behavior of Temozolomide Drug Substances

This study deals with a stability indicating HPLC reverse phase method for quantitative determination of temozolomide. A chromatographic separation was achieved on an Inertsil ODS 3V, 250 × 4.6 mm ID, 5 μm column using mobile phase A (buffer 5 mL glacial acetic acid in 1,000 mL of Milli Q water ) and mobile phase B (methanol). Forced degradation studies were performed on bulk sample of temozolomide using acid (0.5 N hydrochloric acid), base (0.5 N sodium hydroxide), oxidation (10% v/v hydrogen peroxide), heat (60 °C) and UV light (254 nm). Degradation of the drug substance was observed in base hydrolysis and oxidation. Degradation product formed under these conditions was found to be Imp-A. When the stress samples were assayed, the mass balance was close to 99.5%. The sample solution was stable up to 48 h at 5 °C and mobile phase was found to be stable up to 48 h at 25 °C. The developed method was validated with respect to linearity, accuracy, precision, robustness and forced degradation studies prove the stability indicating power of the method.     

A Validated Stability-Indicating High-Performance Thin-Layer Chromatographic Method for the Estimation of Pirfenidone in Tablet Formulation

JPC – Journal of Planar Chromatography – Modern TLC -     

Thin-Layer Chromatographic Selective and Stability-Indicating Method for Assay of Cefixime in Pharmaceuticals

JPC – Journal of Planar Chromatography – Modern TLC - A thin-layer chromatographic (TLC) method is developed for the analysis of cefixime using precoated silica gel 60F254 TLC aluminum...     

A Rapid Stability-Indicating LC Method for Ziprasidone Hydrochloride

A simple and rapid reversed-phase liquid chromatographic method was developed for the related substances determination and quantitative evaluation of ziprasidone hydrochloride, which is used as an antipsychotic agent. Forced degradation studies were performed on bulk sample of ziprasidone hydrochloride using acid, base, oxidative hydrolysis, thermal stress and photolytic degradation. Mild degradation of the drug substance was observed during thermal stress and considerable degradation observed during base hydrolysis. The chromatographic method was fine tuned using the samples generated from forced degradation studies. Good resolution between the peaks corresponds to synthetic impurities and degradation products from the analyte were achieved on YMC Pack Pro C18 column using the mobile phase consists of a mixture of 0.05% v/v of phosphoric acid in water and acetonitrile. The stressed test solutions were assayed against the qualified working standard of ziprasidone hydrochloride and the mass balance in each case was close to 99.7% indicating that the developed method was stability-indicating. Validation of the developed method was carried out as per ICH requirements.     

Degradation studies of quetiapine fumarate by liquid chromatography–diode array detection and tandem mass spectrometry methods

Quetiapine fumarate (QUE) is an antipsychotic agent with a chemical structure that is susceptible to degradation; therefore, it is important to study its stability using appropriate analytical tools. Knowledge of the stability profile of a drug is important because chemical degradation of its active component often results in a loss of potency, affecting its efficacy and safety. This current work reports degradation studies of QUE as drug substance, under different stress conditions such as oxidation, hydrolysis, heat, humidity and photolysis, by a stability‐indicating LC method. The chemical stability was evaluated using a simple HPLC/diode array detection method, with a core‐shell C₁₈ column under isocratic conditions, which allows the separation of all primary degradation products (DPs) in a short run time. QUE was mainly degraded under oxidative and hydrolytic conditions, with the formation of three and two DPs, respectively, which were identified by electrospray ionization–tandem mass spectrometry. The method was properly validated in terms of linearity, accuracy, precision, selectivity, robustness and quantitation limit. Commercial tablets containing 25 mg of QUE were quantified, with results obtained within the United States Pharmacopeia limits. The proposed method is suitable to assess the stability and perform routine analysis of QUE in pharmaceutical samples.     

A Validated High-Performance Thin-Layer Chromatographic Method for the Determination of Azathioprine from Pharmaceutical Formulation

JPC – Journal of Planar Chromatography – Modern TLC - A simple, specific, and precise high-performance thin-layer chromatographic (HPTLC) method for the analysis of azathioprine, both...     

A Validated Stability-Indicating TLC Method for Determination of Forskolin in Crude Drug and Pharmaceutical Dosage Form

A simple, accurate, selective, precise, economical and stability-indicating high-performance thin-layer chromatographic method for analysis of forskolin in crude drug and in pharmaceutical dosage form was developed and validated. The method was developed on TLC aluminium plates precoated with silica gel 60F-254 using solvent system benzene:methanol (9:1, v/v), which gives compact spot of forskolin (R _f value 0.25 ± 0.02). Densitometric analysis of forskolin was carried out in the absorbance mode at 545 nm after spraying with anisaldehyde sulphuric acid. The linear regression analysis data for the calibration plots showed good linear relationship with r = 0.994 and 0.994 with respect to peak height and peak area, respectively, in the concentration range 100–1,000 ng per spot. The limits of detection and quantification were 8.1 and 26.9 ng per spot, respectively. The proposed method was applied for determination of forskolin in Coleus forskohlii root and in capsule dosage forms, which showed 0.18 and 0.57% w/w of forskolin. Forskolin was subjected to acid and alkali hydrolysis, oxidation, photodegradation and heat degradation. It was observed that the drug is susceptible to acid, base hydrolysis, oxidation, photo-oxidation and heat degradation. Statistical analysis proves that the method is repeatable, selective and accurate for the estimation of forskolin in crude drug and in pharmaceutical dosage forms. The developed method effectively resolved the forskolin from components of C. forskohlii root, from excipients of capsule as well as the degradation products of forskolin hence, it can be employed for routine analysis and as a stability-indicating method.     

A Validated Stability-Indicating High-Performance Thin-Layer Chromatographic Method for the Analysis of Methotrexate in Bulk Drug and Marketed Injection

JPC – Journal of Planar Chromatography – Modern TLC -     

Stress Degradation Studies on Tadalafil and Development of a Validated Stability-Indicating LC Assay for Bulk Drug and Pharmaceutical Dosage Form

A stability-indicating HPLC assay method was developed for the quantitative determination of tadalafil in bulk samples and in pharmaceutical dosage forms in the presence of the degradation products. It involved a 250 mm × 4.6 mm, 5 μm C-18 column. The gradient LC method employs solution A and B as mobile phase. Solution A contains a mixture of buffer (phosphate buffer and tetra-n-butyl ammonium hydrogen sulfate) pH 2.5: acetonitrile (80:20, v/v) and solution B contains a mixture of water: acetonitrile (20:80, v/v). The flow rate was 1.0 mL min⁻¹ and the detection wavelength was 220 nm. The retention time of tadalafil is about 17 min. Tadalafil was subjected to different ICH prescribed stress conditions. Degradation was found to occur in hydrolytic and to some extent in oxidative stress conditions, while the drug was stable to photolytic and thermal stress. The drug was particularly labile under alkaline hydrolytic conditions. The drug was subjected to stress conditions of hydrolysis, oxidation, photolysis and thermal degradation. The assay of stress samples was calculated against a qualified reference standard and the mass balance was close to 99.5%. The developed RP-LC method was validated with respect to linearity, accuracy, precision and ruggedness.