3,4-Dihydroxybenzoic Acid As A Reagent for the Spectrophotometric Determination of Titanium

Abstract

The reaction between titanium(IV) and 3,4-dihydroxybenzoic acid in aqueous media results in an intensely colored complex which is stable for at least 8h. It allows the spectrophotometric determination of titanium in silicate rocks. The proposed method, in pH 4.0–6.0, shows a molar absorptivity of 1.43.10⁴ L.mole^?1.cm^?1 at 380 nm. Beer's Law is obeyed up to 3.0 μg/mL of titanium(IV). The interference of iron(III) can be eliminated by reduction to iron(II) with hydroxylamine hydrochloride. The method was applied to the determination of titanium in various standard rocks and the results indicated that the accuracy and precision are satisfatory.     

Ternary Complex Nickel(II)/3-(4′,5′-Dimethyl-2′-Thiazolylazo)-2,6-Dihydroxybenzoic Acid/Cyanide. Spectrophotometric Determination of Nickel

Abstract

A spectrophotometric method for nickel has been developed based on the formation of a ternary complex in the system Ni(II)/3-(4′,5′-dimethyl-2′-thiazolylazo)-2,6-dihydroxybenzoic acid/cyanide at pH 9.2 (borate buffer), which allows the determination of 0.05–0.47ppm of nickel (ε = 3.53×10⁴ 1.mol^?1. cm^?1) at 538nm. Interferences have been studied and the method applied to the determination of nickel in low alloy steels.     

Extraction-Spectrophotometric or -Atomic Absorption Spectrophotometric Determination of Titanium Using Caffeic Acid and a Liquid Ion Exchanger

Abstract

A selective and sensitive method for the extraction followed by a spectrophotometric or atomic absorption spectrophotometric determination of titanium(IV) in trace amounts is described. The molar absorptivity of the caffeic acid-Aliquat 336 complex is 5.7 × 10⁴ l mol^?1 cm^?1 at 380 nm; the yellow coloured complex obeys Beer's law in the range 0.05–1.2 mg/l of titanium in the final extract. The method is applied to the preconcentration, separation and determination of titanium(IV) in steel, industrial effluents and environmental samples.     

Spectrophotometric Determination of Palladium by the New Chromogenic Reagent N-Butyl - N'-(Sodium P-Aminobenzenesulfonate) Thiourea

Abstract

A highly sensitive spectrophotometric method for determination of palladium by the new chromogenic reagent (BPT) has been developed. In the presence of cetyltrimethylammonium bromide(CTMAB), palladium reacts with BPT to form a stable yellow complex in HAc-NaAc buffer solution of pH 4.6-5.6 at 294.4 nm with a molar absorptivity of 2.46 x 10⁵ l mol^?1 cm^?1. The method is simple, rapid and sensitive. Trace amounts of palladium in mineral and catalyst samples have been satisfactorily determined by the method.     

Spectrophotometric Determination of Cobalt in Vitamin Preparations,Steel and Iron Using 2-Hydroxy- 1-Naphthaldehyde Guanylhydrazone

Abstract

A new spectrophotometric determination of cobalt with 2-hydroxy-1-naphthaldehyde guanylhydrazone in acid medium is described. The method is developed on the basis of a yellow cobalt (III) complex (molar absorptivity 1.32×10^?4 L.mol^?1.cm^?1 at 416 nm, stoichiometry 2:1). The method was applied to the determination of cobalt in vitamin preparations, steel and high-purity iron.     

6-Phenyl -2,3-Dihydro-asym-trirzine-3-thione as a Selectiue Reagent for the Spectrophotometric Determination of Copper

Abstract

A sensitive and highly selective spectrophotometric method is described for the determination of 12-120 μg of copper using 6-phenyl-2,3-dihydro-asym-triazine-3-thione (PDTT) as a complexing agent. The red 1:4 water soluble complex was measured at 540nm, ε=1.26×10⁴ 1. mol^?1cm^?1.

The method was applled for the determination of copper in standard steels (B.C.S.) and estimation of the solubility product of copper (I) iodide. Comperison was also made with the 2-2 biquinoline method.     

Novel Method for Selective Spectrophotometric Determination of Titanium(IV) with Water Extract of Slippery Elm Leaf as a New Reagent

Abstract

A novel spectrophotometric method for the determination of titanium(IV) by using a new reagent, water extract of slippery elm leaf is developed. In 0.05 M hydrochloric acid, titanium(IV) reacts with this reagent to form a yellow product. The formed product shows maximum absorbance at 415 nm with a molar absorptivity value of 0.68×10⁴ l mol^–1 cm^–1 and the method was linear in the 0.2–6 µg ml^?1 concentration range. The detection limit value was found to be 0.0131 µg ml^?1. The proposed method was simple, low cost, selective, and sensitive. It was applied to the analytic samples with satisfactory results.     

Selective Spectrophotometric Determination of Palladium (II) With 2-(5-Bromo-2-Pyridylazo)-5-(Diethylamino)-Phenol

Abstract

A spectrophotometric study of the Pd(II) complex of a reagent 2-(5-Bromo-2-Pyridylazo)-5-(diethylamino)-Phenol (5-Br-PADAP) is presented. A violet complex is formed at pH 3.53, and shows maximal absorbance at 585 nm with molar absorptivity of 3.86 × 10⁴ 1. mol^?1 cm^?1. Beer's law is obeyed up to 50 μ of Pd(II). The method offers the advantages of simplicity, high precision, requires no extraction and is very selective, where 5.0 mg Pt(VI) and 0.3 mg Au(III) ions do not interfere.     

Spectrophotometric determination of titanium as tetraphenylarsonium or tetraphenylphosphonium thiocyanato-titanate

The spectrophotometric determination of titanium(IV) with thiocyanate by extraction of the tetraphenylarsonium and tetraphenylphosphonium ion-association complexes is described. The extracted complexes in chloroform have a maximum absorbance at 420 nm, obey Beer's law in the range 0.1–1 μg Ti ml^?1, and are stable for at least 5 hr. The molar absorptivity of the method is 7.5 × 10⁴ liters mol^?1 cm^?1. The described method is sensitive, selective, and reproducible. The composition of the extracted complexes was studied in solution and in solid state. The complexes [(C₆H₅)₄X]₂ [Ti(NCS)₆] (X = As, P) were isolated from the chloroform solution.     

Spectrophotometric Assay of Certain Aminoglycosides Using Cyanoacetamide

Abstract

A simple and sensitive ultraviolet spectrophotometric method has been devised for the determination of amikacin, kanamycin, neomycin and streptomycin in pure form and in some pharmaceutical preparations. The method depends on the nitrosation of the primary amino groups followed by reaction with cyanoacetamide in ammonia medium at 100°C for 30 min, The reaction products exhibit a characteristic absorption. maximum at 270 nm. Beer's law is obeyed within the concentration ranges 4–40 μg ml^?1 for amikacin, kanamycin and neomycin and 8–80 μg ml^?1 for streptomycin with apparent molar absorptivities of about 1.85 × 10⁴ for the first three compounds and 1.3×10⁴ 1. mole^?1.cm^?1 for streptomycin.     

Spectrophotometric Determination of Manganese with 4(5)-Imidazolealdoxime (Imalox)

Abstract

A method is described for the spectrophotometric determination of manganese by means of its complex with 4(5)-imidazolealdoxime, IMALOX, formed in alkaline medium. The colour system has its absorption maximum at 350 nm and obeys Beer's law over the range 0.8–8.0 μg of Mn per ml. The optimum range is 1–5 μg m^?1. The molar absorptivity is 7850 1 mol^?1 cm^?1. Relatively few ions interfere, and these can be masked with cyanide, tartrate and NTA. The experimental results have been critically analyzed and a comparison with the main spectrophotometric reagents for manganese is presented.     

5-(2′-Carboxyphnyl) Azo-8-quinolinol as a Sensitive Reagent for Extractive Spectrophotometric Determination of Nickel

Abstract

A new sensitive extractive spectrophotometric method for the determination of nickel in sub-microgram level is discussed. 5-(2′-carboxyphenyl) azo-8-quinolinol reats with nickel at pH 5.2 to 6.1 to produce a wine red complex extractable in isomayl alcohol. The complex is stable for 24 hrs. Beer's law is obeyed in the range 0.04 to 0.60 ug of nickel per ml. The molar absorptivity and Sandell's sensitivity of the method are 5.5 × 10⁴1. mol^?1 cm^?1 and 0.001 μg cm^?2, respectively, at wavelength of maximum absorption (λ max 540 nm). Effects of diverse ions and variables have been studied in detail. The method has been applied to the determination of nickel in alloys like manganin, constantan, german silver, bronze, steel and in geological samples. Features of the method include high sensitivity, excelllent reproducibility and reliability.     

Solvent extraction and spectrophotometric determination of titanium(IV) with 3-phenyl-3-methyl-2-mercaptopropenoic acid

The distribution equilibria of 3-phenyl-3-methyl-2-mercaptopropenoic acid (PhMMP) and the titanium(IV)-PhMMP complex have been studied. An extraction-photometric method for the determination of microamounts of titanium has been developed. We have investigated the influence of pH, the reagent, and the presence of electrolytes and masking agents in the aqueous phase on the equilibrium. From the slope analysis of the distribution curves the composition of the extracted species has been found to be Ti(OH)₂(HR)₂. The complex is extracted quantitatively. Beer's Law is followed over the range 0.09–3.74 μg ml^?1 of titanium(IV), the molar absorptivity is 1.65 × 10⁴ liters mol^?1 cm^?1, and the Sandell sensitivity is 2.8 ng cm^?2 at 439 nm. This method has been applied to the determination of titanium in a bauxite.     

Spectrophotometer Determination of Nitrite Using Salbutamol sulphate as a Reagent

Abstract

A simple spectrophotometric method for the trace determination of nitrite (NO^? ₂) is described. Nitrite is reacted with Salbutamal sulphate in acidic medium which gives a yellow colour in alkaline medium (?pH 7) and can be determined in the presence of several cations and anions. Beer's law is obeyed in the range of 1.8 to 27.6 ppm of nitrite with the molar absorptivity 1.8 × 10³ 1 × mole^?1 × cm^?1 at 4l0 nm. The proposed method can also be utilized for the determination of nitrate (NO^? ₃) after its reduction to nitrite. The method has been applied for the determination of various samples containing traces of nitrite.     

Specific Spectrophotometric Determination of Palladium with N,N'-Diphenylbenzimidoylthiourea

ABSTRACT

A specific method for the spectrophotometric determination of palladium with N.N'-diphenylbenzimidoylthiourea (DPB1TU) is described. The method in new, simple, rapid and applicable over 0.3-1.0 M HC1 and free from interferences of the precious metals i.e.

Ag, Au, Pt, Ir, Rh, Ru, Os. The value of molar absorptivity of the complex in the term of Pd is (2.50)x10⁴ L mole^?1 cm^?1at λ_max 365 nm in chloroform. The detection limit of the method at 3 σ a is 80 ppb Pd. The composition of the complex and effect of diverse ions in the determination of Pd are discussed. The application of the method has been tested for the analysis of the metal in catalytic material.     

Liquid-Liquid Extraction,Photometric and Atomic Absorption Spectrophotometric Determination of Mercury

Abstract

A selective and sensitive spectrophotometric and atomic absorption spectrophotometric method is developed for the determination of traces of mercury with N-phenylcinnamohydroxamic acid (PCHA) in the environment. Mercury is extracted into a chloroform solution of PCHA at pH 8.5-10.0 and determined by AAS. The mercury hydroxamate binary complex is yellow in colour having a maximum absorbance at 390 nm and molar absorptivity 4.3 × 10³ 1 mol^?1 cm^?1, sandell sensitivity 0.0466 μg/cm². The ternary system using 1-(2-pyridylazo)-2-naphthol has molar absorptivity 8.82 × 10³ 1 mol^?1 cm^?1 at 550nm, sandell sensitivity 0.0228 μ/cm². Beer's law is obeyed in the concentration range of 2.37-38.0 ppm and 0.80-19.5 ppm of mercury for binary and ternary system, respectively. The extraction of Hg-PCHA binary system is studied with a liquid cation exchanger, bis-(2-ethyl hexyl) phosphoric acid (HDEHP) and found to have better selectivity than Hg-PCHA-PAN system. The molar absorptivity of the Hg-PCHA-HDEHP system is 8.82 × 10³ 1 mol^?1 cm^?1 at 390 nm and Beer's law is obeyed in the concentration range of 0.47-20 ppm of mercury.

The present method is applied to the determination of mercury in eye drops, aurvedic drugs and environmental samples.     

Spectrophotometric determination of titanium with Chrome Azurol S (or Eriochrome Cyanine R) in the presence of some cationic surfactants

A new sensitive spectrophotometric method for titanium determination, based on the ternary Ti-Chrome Azurol S (CAS)-cetyltrimethylammonium (CTA) system, was developed. The molar absorptivity is 7.3 × 10⁴ liters mol^?1 cm^?1 at λ_max = 565 nm. The maximum absorbance is attained in 5 min at pH 1.3 ± 0.1 and at CAS and CTA concentrations of 1.5 × 10^?4 and 5 × 10^?4M, respectively. Zirconium and hafnium in the presence of ascorbic acid are the only interfering metals. Hydrogen peroxide and EDTA interfere with the titanium determination as well. The proposed method was applied to the determination of titanium (about 1 × 10^?2%) in aluminum metal. The method, based on the Ti-Eriochrome Cyanine R-CTA system, is similar to the above method. Among other cationic surfactants, cetylpyridinium chloride (CP) and zephiramine were examined. The color effects when using CP, and especially zephiramine, are worse than in the presence of CTA.     

Cyclopentane-1,3-dione Bis (4-Methylthiosemicarbazone) Monohydrochloride as a Spectrophotometric Reagent for the Determination of Bromate in Perchloric Acid Medium

Abstract

Cyclopentane-1,3-dione bis (4-methylthiosemicarbazone) monohydrochloride produces coloured solutions with bromate ions in perchloric acid medium. The yellow colour obtained (molar absorptivity 1.8×10⁴ 1.mol^?1.cm^?1 at a wavelength of 400 mm) has been used for the spectrophotometric determination of trace amounts of bromate.     

Spectrophotometric study of the reaction of titanium with bromopyrogallol red in the presence of cetylpyridinium bromide

Optimal conditions were found for the reaction of Ti(IV) with bromopyrogallol red (λ = 625 nm, pH = 2.5, c_DG = 4 × 10^?5M, c_CPB = 5 × 10^?4M) and a new method was developed for the spectrophotometric determination of titanium in the concentration range 0.05–0.5 μg ml^?1. A mechanism was proposed for the studied reaction on the basis of a kinetic study.     

New Spectrophotometric Method for Sulfite Determination

Abstract

A highly selective spectrophotometric method for the determination of aqueous sulfite was developed. Sulfite was found to react with o-phthaldialdehyde in presence of ammonia yielding a deep blue colored complex the absorbance of which is sensitive to trace sulfite concentrations. The method is simple, very sensitive, and convenient for the determination of as little as 5X10^?6 M sulfite. The molar absorptivity of the colored complex is about 1.2X10⁴ L cm^?1 mol^?1. The proposed method is more sensitive and selective for sulfite than the widely used Ellman reagent method. Absorbance is measured at 628 nm which is the best of the two absorption maxima that are exhibited by the compound.