Zero-Order and Third-Derivative Spectrophotometric Determination of Iron(III) with 4-(2-Pyridylazo)-Resorcinol in the Presence of N-Hexadecylpyridinium Chloride

Abstract

The complex formation reaction between iron(III) and 4-(2-pyridylazo) resorcinol(PAR) in the presence of various water soluble surfactants((N-hexadecylpyridinium chloride (HPC), poly(vinylalcohol)(PVA), sodium dodecylsulfate(SDS), sodium N-lauroylsarcosine(SL)) alone or in combination at weakly acidic media was systematically investigated. An improved and more sensitive spectrophotometric method for the determination of iron was proposed by zero-order and third-derivative spectrophotometry using the PAR-iron(III)-HPC ternary complex system at about pH 5.2. The calibration curve was rectilinear in the ranges of 0 – 15.0 μg iron(III) in a final 10-ml on the zero-order spectrophotometry. Also, upon the third-derivative spectrophotometry, Beer's law was obeyed in the range of 0 – 8.0 μg iron(III)/10 ml by measuring the distance between the absorbance peak(λ₁ = 527 nm) and the valley (λ₂ = 560 nm). The apparent molar absorptivity was 4.8 × 10⁴ 1 mol^?1 cm^?1 in zero-order spectrophotometry, and 1.36 × 10⁵ mol^?1 cm^?1 in third-derivative spectrophotometry. The effect of foreign ions was decreased within ½ – ¼-fold in comparison with the method in the presence of PVA without HPC. Especially, the third-derivative spectrophotometric method was sensitive and selective, and made possible to assay mixed sample solution containing iron(III) and copper(II), etc.     

Spectrophotometric Study of 1, 3-Cyclohexanedione Bisthiosemicarbazone Monohydrochloride -Bi (III) Complex. Determination of Bi (III)

Abstract

The spectrophotometric study was made of red-violet 1, 3-cyclohexanedione bis-thiosemicarbazone-Bi (III) in an acidic dimethylformamide-water solution (λ_max = 540 nm, ? = 3.3 × 10^?4 1. mol^?1. cm^?1, stoichiometry 3:1, apparent stability constant (6.0 × 10¹⁰). A new method for the spectrophotometric determination of Bi (III) is proposed for concentrations between 0.7 and 7.4 ppm. The relative error (95 % confidence level) is 0.5 % for 3.7 ppm of Bi (III).

The extraction with methyl isobutyl ketone of the red-violet complex was also studied spectrophotometrically (λ_max = 550 nm, ? = 3.34 × 10⁴ 1. mol^?1.cm^?1, stoichiometry 2:1). A new method for the extraction-spectrophotometric determination of Bi (III) is proposed for concentrations, in aqueous phase, between 0.2 and 1.2 ppm. The relative error (95 % confidence level) is 0.8 % for 0.9 ppm of Bi (III).     

Spectrophotometric Determination of Iron (III) Using 3-Hydroxy-2-Methyl-1,4-Naphthoquinone Monoxime (HMNQM)

Iron (III) forms brown coloured complex with 3-hydroxy-2-methyl-1,4-naphthoquinone monoxime. The iron (III)-HMNQM complex is found to be soluble in DMF and exhibits maximum absorption at 470 nm in the pH range 4.5–5.5. Beer's law is obeyed upto 5.58 ppm of iron (III) and sensitivity of the reaction is 0.0046 μg/cm², with molar absorptivity of 1.21×10⁴ ? mole^?1 cm^?1. The method has been used for the determination of iron (III) in alloys.     

Spectrophotometric Determination of Iron(III) as Azide Complexes in Aqueous Tetrahydrofuran

Abstract

A simple, sensitive and alternative method for the spectrophotometric determination of iron(III) has been established. The procedure is based on the formation of iron-azide complexes in 60% (v/v) tetrahydrofuran/ water medium. The high sensitivity obtained in this method is due to the use of an interesting absorption band not previously reported in the literature. In the recommended conditions, absorbances for the ferric complexes are measured at 400 nm where the molar absorptivity is 1.52 × 10⁴ 1 mol^?1 cm^?1. The organic solvent used increases the sensitivity and the stability of the measurements. The precision is shown by the average deviation of about 0.3%. This system obeys Beer's law and is suitable for iron(III) determination in the concentration range from 0.6 to 3.2 mg 1^?1 (ppm). The best experimental conditions were determined studying the different factors involved. The influence of various diverse ions was also studied.     

Spectrophotometric Determination of Copper(II) as the Azide Complexes,in the Presence of Iron(III) Cations

Abstract

A method for the spectrophotometrio determination of copper(II), in the presence of iron(III) cations (excess), was stablished. The masking of iron is made with sodium fluoride salt in 50 % (v/v) water/acetone medium. In the recommended conditions, absorbances for cupric complexes are measured at 435 nm where molar absorptivity is 6.00 × 10³ 1 mol^?1 cm^?1.

The stable ayetern obeys Beer's law and is suitable for the copper determination in concentration range from 2.0 to 9.0 mg 1^?l. The iron(III) ion interference (until ca. 600 mg 1^?l) can be completely suppressed. The influence of diverse ions and several others factore were studied.

The results show that copper(II) can be accurately determined by azide apectrophotometric method, if the samples were suitablely treated by the recommended procedure.     

Voltammetry of Dissolved Iron(III)–Nitrilotriacetate–Hydroxide System in Water Solution

The investigation of the dissolved iron(III)–nitrilotriacetate–hydroxide system in the water solution (I=0.1 mol L^?1 in NaClO₄; pH 8.0±0.1) using differential pulse cathodic voltammetry, cyclic voltammetry, and sampled direct current (DC) polarography, was carried out on a static mercury drop electrode (SMDE). The dissolved iron(III) ion concentrations varied from 2.68×10^?6 to 6×10^?4 mol L^?1 and nitrilotriacetate concentrations were 1×10^?4 and 5×10^?4 mol L^?1. By deconvoluting of the overlapped reduction voltammetric peaks using Fourier transformation, four relatively stable, dissolved iron(III) complex species were characterized, as follows: [Fe(NTA)₂]^3?, mixed ligand complexes [FeOHNTA]^? and [Fe(OH)₂NTA]^2?, showing a one‐electron quasireversible reduction, and binuclear diiron(III) complex [NTAFeOFeNTA]^2?, detected above 4×10^?4 mol L^?1 of the added iron(III) ions, showing a one‐electron irreversible reduction character. The calculations with the constants from the literature were done and compared with the potential shifts of the voltammetric peaks. Fitting was obtained by changing the following literature constants: log β₂([Fe(NTA)₂]^3?) from 24 to 27.2, log β₁([FeNTA]^?) from 8.9 to 9.2, log β₂([Fe(NTA)₂]^4?) from 11.89 to 15.7 and log β₂([Fe(OH)₂NTA]^3?) from 15.63 to 19. The determination of the electrochemical parameters of the mixed ligand complex [FeOHNTA]^?, such as: transfer coefficient (α), rate constant (k_s) and formal potential (E°') was done using a sampled DC polarography, and found to be 0.46±0.05, 1.0±0.3×10^?3 cm s^?1, and ?0.154±0.010 V, respectively. Although known previously in the literature, these four species have now for the first time been recorded simultaneously, i.e. proved to exist simultaneously under the given conditions.     

Direct and Second Order Analogue Derivative Extraction-Spectrophotometric Determination of Iron with 2 (4, 5-Dimethyl-2-Thiazolylazo)-4, 6-Dimethylphenol

Abstract

An extraction-spectrophotometric method for the determination of trace amounts of iron based on its extraction into chloroform with 2-(4, 5-dimethyl-2-thiazolylazo)-4, 6-dimethylphenol has been developed, which allows the determination of 5–28 μg Fe (?₇₇₃ = 1.38×10⁴ 1. mol^?1. cm^?1). The use of second order analogue derivative spectrophotometry allows the determination of down to 0.2–5 μg, Fe. The methods are quite selective and have been applied to the determination of iron in mineral waters.     

Spectrophotometric determination of iron(III) with EDTA tetrahydrazide

The tetrahydrazide of ethylenediamine tetraacetic acid (NH₂NH)₄-EDTA was synthesized from the EDTA ester and hydrazine hydrate in ethanolic solution, the resulting (NH₂NH)₄-EDTA being recrystallized in 60% ethanol. When the spectrophotometric study of the iron(III) (NH₂NH)₄-EDTA complex in aqueous solution was made two absorption maxima at 530 and 450 nm at pH 4.5 and 11.0, respectively, were found. Beer's law is obeyed in the range 1.0–20.0 μg Fe(III) ml^?1 at 530 nm and pH 4.5 and 0.5–12.0 μg Fe(III) ml^?1 at 450 nm and pH 11.0, the molar absorptivities being 1.95 × 10³ 1 mol^?1 cm^?1 at 530 nm and 3.35 × 10³ 1 mol^?1 cm^?1 at 450 nm, respectively. The Ringbom optimal interval falls between about 3 and 18 μg Fe(III) ml^?1 at 530 nm and about 2–14 μg Fe(III) ml^?1 at 450 nm. The reaction between the metal and the ligand was also investigated. The method has been successfully applied to the determination of iron in talcs.     

Spectrophotometric Determination of Iron In Wines,Vegetables, Pharmaceutical Compounds and Minerals With Mandelohydroxamic Acid (Mha)

Abstract

A new reagent, mandelohydroxamic acid (MHA), which has an easy synthesis and an high water solubility (64.48 gL^?1) is proposed for a simple, rapid, selective and sensitive method for the spectrophotometric determination of iron based upon the formation of the MHA-Fe(III) complex and its extraction into n-butanol under optimum operating conditions. A yellow color is formed when the complex is extracted from acidic aqueous medium (Vw/Vo[dbnd]5) in the organic solvent (apparent molar absortivity 1.15 10⁴ L mol^?1 cm^?1 at a wavenlength of 430 nm). the relative error is 0.5% (2 ppm of iron) and the detection limit is 0.05 g mL^?1 of Fe(III). the method has been applied to the determination of iron in wines, vegetables, pharmaceutical compounds and minerals.     

Analysis of Pheniramine Naleate and Cblorpheniramine Maleate Via Their Fe (III) Cohplexes

Abstract

A new spectrophotoraetric method has been developed for the analysis of pheniramine maleate and chlorphenlramine maleste, based on their reaction with iron (III). Pheniramine maleate and ch lor pheniramine maleate were found to form a 2:1 complex with iron (III) with an average log. stability constant of 12.26 and 12.36, respectively. The iron (III) complexes of both drugs showed maximum absorption at 273 nm, at pH 5, with slopes equal to 0.710 and 0.898 for pheniramine maleate complex and chlorpheniramine maleate complex, respectively. The proposed method was used for the determination of pheniramine maleate and chlorpheniramine maleate in quantities ranging between 0.25 × 10^?4 M to 2.5 × 10^?4 M with mean percentage recoveries of 100.17 ± 1.09% and 100.00 ± 1.13% for both drugs, respectively. The results obtained were compared with that of the B.P. (1980) method.     

Interaction of Phosphate with Iron(III) in Acidic Medium,Equilibrium and Kinetic Studies

Equilibrium reactions of iron(III) with phosphate were studied spectrophotometrically by UV-Vis in the pH range of ～ 1.0-2.20. The STAR-94 Program was used to determine the number of absorbing species as well as the stoichiometries and formation constants of the complex species. Some literature values were further confirmed and new values of different stoichiometries were obtained. The kinetics and mechanism of Fe(III) with phosphate were studied in acidic medium. The reactive phosphate species were found to be only H₃PO₄ and H₂PO^? ₄ and for Fe(III) were only Fe³⁺, FeOH²⁺ and Fe(OH)⁺ ₂. The observed rate constants were pH as well as T_phos (total concentration of phosphate) dependent, i.e. K_obs,i = A _i + B _i T_phos + C _i T² _phos (at a given pH).     

Spectrophotometric Determination of Cobalt in Vitamin Preparations,Steel and Iron Using 2-Hydroxy- 1-Naphthaldehyde Guanylhydrazone

Abstract

A new spectrophotometric determination of cobalt with 2-hydroxy-1-naphthaldehyde guanylhydrazone in acid medium is described. The method is developed on the basis of a yellow cobalt (III) complex (molar absorptivity 1.32×10^?4 L.mol^?1.cm^?1 at 416 nm, stoichiometry 2:1). The method was applied to the determination of cobalt in vitamin preparations, steel and high-purity iron.     

Synthesis,characterization, electrochemical and crystal structure investigation of bis(2-((2-aminoethylimino)methyl)-6-methoxyphenolato) cobalt(III)

The mononuclear cobalt(III) complex [Co(L)₂]Cl ·?H₂O (1) (where L is H₂N(CH₂)₂N=CC₆H₃(OMe)(O^?)) has been prepared and characterized by IR, UV-Vis spectroscopy, conductivity measurements, elemental analysis, TGA, cyclic voltammetry and an X-ray structure determination. The cobalt(III) coordination sphere in [Co(L)2] is cis-CoN₄O₂ with the NNO ligands. Electrochemical studies of 1 using cyclic voltammetry indicate an irreversible cathodic peak (E _pc, ca ?0.60 V) corresponding to reduction of cobalt(III) to cobalt(II).     

Extractive-spectrophotometric determination of traces of copper(II) with 4-(p-nitrophenylazo)-2-amino-3-pyridinol

A new extractive-spectrophotometric method for determination of copper(II) with 4-(p-nitrophenylazo)-2-amino-3-pyridinol is proposed. The established stoichiometry and extraction constant are 2:1 ligand:metal and ?1.55, respectively. The molar absorptivity of the complex is 5.19 × 10⁴ liters mol^?1 cm^?1 at 560 nm and Sandell's sensitivity is 1.2 ng cm^?2. The best conditions for determination and effect of other ions are studied. The method proposed is applied in the determination of copper in whisky, liver of fish, and seawater.     

Iron(III) complexes with N 4- para -tolyl-thiosemicarbazones: spectral and electrochemical studies and toxicity to Artemia salina

Iron(III) complexes [Fe(H2Fo4pT)Cl₃] (1), [Fe(H2Ac4pT)Cl₃] (2) and [Fe(H2Bz4pT)Cl₃] (3) with N⁴ -para-tolyl-thiosemicarbazones derived from 2-formyl (H2Fo4pT), 2-acetyl (H2Ac4pT) and 2-benzoylpyridine (H2Bz4pT) were prepared and characterized. EPR data for 1–3 reveal the presence of low-spin iron(III) with d _xz ²d _yz ²d _xy ¹ ground state. Electrochemical studies of the complexes showed mostly metal-centered redox changes with a quasi-reversible Fe(III)/Fe(II) couple. H2Fo4pT and H2Ac4pT exhibited toxicity against Artemia salina at low doses (LD₅₀ = 27.5 µM and LD₅₀ = 4.7 µM, respectively). Upon coordination the toxicity increased substantially in the case of [Fe(H2Fo4pT)Cl₃] (LD₅₀ = 1.9 µM) and did not change for [Fe(H2Ac4pT)Cl₃]. H2Bz4pT and its iron(III) complex were not soluble in water.     

The structure and magnetic properties of μ3-oxotriiron(III) complex [Fe3O(OBz)6(CH3OH)3](NO3)(CH3OH)2

A new μ₃-O triiron(III) complex [Fe₃O(OBz)₆(CH₃OH)₃](NO₃)(CH₃OH)₂ (HOBZ = benzoic acid) has been synthesized, its structure has been determined and variable temperature magnetic susceptility has also been measured. In the molecule, three iron atoms formed an equilateral triangle with μ₃-O in center. The fitting to the magnetic susceptibility showed that an intramolecular antiferromagnetic exchange interaction occurred between iron atoms with J=-25.51 cm^?1, and a weaker intermolecular autiferromagnetic exchange interaction occurred with zJ' = ?2.30 cm^?1.     

The extraction-spectrophotometric determination of chromium(III) with 4-(2-pyridylazo)-resorcinol

The extraction-spectrophotometric determination of chromium(III) with 4-(2-pyridylazo)-resorcinol (PAR) is described. PAR(H₂R) forms a 1:3 complex with chromium(III) in a boiling acetate buffer solution at pH 5. The complex forms an ion-association compound with tetradecyldimethylbenzylammonium ion (TDBA⁺):Cr(R)(HR)₂^--TDBA⁺ which can be extracted into chloroform, the molar absorptivity being 4.7 ·10⁴ at 540 nm. If EDTA is added as a masking agent after the Cr(HR)₃ has been formed, only iron, cobalt and nickel interfere seriously, and the method can be made specific for chromium by a preliminary extraction of these metals with cupferron. The sensitivity of the method is seven times higher than that of the diphenylcarbazide method.     

Spectrophotometric study of 1,2,5,8-tetrahydroxyanthraquinone-In(III) complex: Determination of In (III)

The 1,2,5,8-tetrahydroxyanthraquinone (quinalizarin) forms a colored complex with the ion In(III) in dimethylformamide-water solution. The 3:1 (R:In(III)) complex shows a λ_max of 565 nm and a molar absorptivity of 4.59 × 10⁴ liters mol^?1 cm^?1. A new method for the spectrophotometric determination of In(III) between 0.2 and 2.2 ppm with a relative error of 1.57% is proposed.     

Direct Synthesis of a Dimeric Mixed-Anions Bismuth(III) Complex: Synthesis and Structural Characterization of [Bi2(Phen)4(No3)4.4I0.6]I3 (A New Dimeric Compound)

A direct synthetic method of mixing Bi(NO₃)₃ and NaI with 1,10-phenanthroline yielded red crystals of [Bi₂(phen)₄(NO₃)_4.4I_0.6]I₃. In this complex the cationic part is in fact binuclear and contains two [Bi(phen)(NO₃)_1.7I_0.3] groups linked via a bridging NO^? ₃ anion. The I^? ₃ anion was not coordinated to bismuth(III) and the lone pair of valence electrons of the bismuth(III) ions appears to be stereochemically inactive. There are two independent NO^? ₃ anions, one coordinated to bismuth but another shares a position with I^? anion. The final results of crystallography show that 40% of these positions are occupied by NO^? ₃ anions and 60% by I^? anions that are coordinated to bismuth atom in bidentate fashion (NO^? ₃) and in unidentate fashion (I^?). An interesting point is that the I^? ₃ anion was produced by direct synthetic method (Branched tube method). There is a π-π stacking interaction between the parallel aromatic rings around the Bi(III) ion.     

Determination of Chromium(III) with Eriochrome Cyanine R by Fourth-Derivative Spectrophotometry

Summary

A fourth-derivative spectrophotometric determination of chromium(III) with Eriochrome Cyanine R (ECR) was described. The method was based on measuring the fourth-derivative value (D₄) at 545 nm. The experimental and instrumental variables (wavelength range, scan speed, band width and order of derivative) were optimized. Under the optimum conditions, the calibration graph fit the equation d⁴ A/d⁴ = 3.75 × 10⁵ [Cr(III)] + 0.003 (r=0.9991) and have a relative standard deviation of 1.19%. The method was valid for concentrations between 20 ng/ml and 80 ng/ml of chromium(III). The molar ratio of the formed complex was 1:2 (M:L). The proposed method was successfully applied to the determination of chromium in steel.