Corrosion Behavior in Acid and Alkaline Media of Nickel Coatings Deposited at Room Temperature

Impedance spectroscopy, chronovoltammetry, chronopotentiometry, scanning electron microscopy, and atomic-force microscopy were used to examine the corrosion behavior in acid and alkaline media and the morphology of nickel coatings electrodeposited from acetate, tartrate, and isobutyrate electrolytes at a temperature of 20–25°C. Models describing the nickel corrosion processes in H₂SO₄ and NaOH solutions were suggested. It was found that nickel coatings formed from isobutyrate electrolytes have the highest corrosion resistance.     

Synthesis and structural characterization of new trinuclear cobalt(II) and nickel(II) complexes possessing five- and six-coordinated geometry

Tri-nuclear cobalt and nickel complexes ([(CoL)₂(OAc)₂Co]?·?THF (I) and [(NiL)₂(OAc)₂(THF)₂Ni]?·?THF (II)) have been synthesized by reaction of a new Salen-type bisoxime chelating ligand of 2,2′-[ethylenedioxybis(nitrilomethylidyne)]dinaphthol(H₂L) with cobalt(II) acetate tetrahydrate or nickel(II) acetate tetrahydrate, respectively. Complexes I and II were characterized by elemental analyses, IR, TG-DTA and ¹H-NMR etc. The X-ray crystal structures of I and II reveal that two acetate ions coordinate to three cobalt or nickel ions through M–O–C–O–M (M?=?Co or Ni) bridges and four μ-naphthoxo oxygen atoms from two [ML] units also coordinate to cobalt(II) or nickel(II). Complex I has two distorted square-pyramidal coordination spheres and an octahedral geometry around Co1. In complex II all three nickel ions are six-coordinate.     

TRANSITION METAL COMPLEXES OF AMINOPHOSPHONIC ACID ANALOGUES OF METHIONINE AND ALANINE IN AQUEOUS SOLUTION

Abstract

The stoichiometrics and stability constants of the nickel(II), copper(II) and zinc(II) complexes of l-amino-3-methylthiopropanephosphonic acid (MetP) and 1-amino-ethanephosphonic acid (a-AlaP) have been determined pH-metrically at 25°C at an ionic strength of 0.2 mol dm^?3 (KC1). From the stability data and the absorption spectra of the complexes it has been established that simple aminophosphonic acids coordinate to the nickel(II) and copper(II) ions forming chelate complexes in which the metal binding mode is bidentate with the {NH₂, PO₃ ^2-} donor set. ³¹P and ¹H NMR measurements showed that MetP and α-AlaP exhibit similar properties in the presence of zinc(II) ions, but the ligand reacts to form a cyclic phosphonoamidate in neutral and slightly alkaline solution in the Zn(II)-α-AlaP system and at slightly acidic conditions in the Zn(II)-MetP system. This difference reveals that the latter ligand at pH > 7 prefers Zn(II) coordination involving all possible (amino, phosphonate and thioether sulfur) donor groups.     

Analysis of Corrosion Products Formed on Cu-Ni Alloys Immersed in Sea Water

Abstract

A method was developed for separation and analysis of corrosion products formed on the surface of Cu-Ni alloys immersed in sea water polluted by sulphide ions. This method is based on the selective dissolution of oxidation compounds by suitable solvents dissolving the metal matrix only to a negligeable extent.

The following solvents were used: 1) methanol to dissolve Na⁺, Cu²⁺, Ni²⁺ chlorides and sulphates; 2) glycine to dissolve bivalent metal compounds - Cu²⁺, Ni²⁺ oxides, sulphides, oxysulphates, oxychlorides and oxycarbonates; 3) ammonia solution to dissolve Cu⁺ compounds (i.e. Cu₂O and CuCl); 4) potassium cyanide to dissolve CU⁺ sulphides.

Reasonable agreement between chemical and X-Ray analysis results was observed only for copper compounds, since nickel and iron compounds could not tie observed by X-Ray diffraction. The results of Auger and chemical analyses better agree with each other, yet no Fe compounds could be detected. This is to be attributed to the non-homogeneous corrosion layer which notably contains Fe compounds in the innermost region at a depth where Auger spectroscopy is unable to detect them, whereas their detection is possible by chemical analysis, since it is a bulk analysis.     

THE CRYSTAL,MOLECULAR STRUCTURE AND LIGAND BONDING IN TETRAKIS (N,N′-DIMETHYLTHIOUREA) NICKEL (II) BROMIDE DIHYDRATE

Abstract

The crystal structure of tetrakis(N,N′-dimethylthiourea)nickel(II) bromide dihydrate has been determined by three-dimensional x-ray diffraction from 1916 counter-data reflections collected at room temperature.

The structure consists of Ni[SC(NH)₂(CH₃)₂]²⁺ ₄ molecular ions, Br^? ions and waters of hydration. The nickel is located on a center of symmetry and is coordinated to four sulfur atoms in a square planar configuration. The waters of hydration and the bromide ions are involved in hydrogen bonding to the N,N′-dimethylthiourea (dmtu) groups. The orientation of the dmtu groups is such that two bond through the sulfur sp² orbital and the others bond through the π-orbitals of the dmtu group. The Ni-S distances are 2.204 ± 0.002 Å and 2.230 ± 0.002 Å, and the Ni-S-C angles are 106.2 ± 0.2Å and 110.3 ± 0.3°. The dmtu groups are planar except for methyl hydrogens.

The crystals are monoclinic, P2₁/a with a = 13.424 ± 0.002 Å, b = 12.321 ± 0.005 Å, c = 8.460 ± 0.008 Å β = 107.07 ± 0.05°, ρ₀ = 1.67 g cm^?3, ρ_c = 1.66 g cm^?3 and Z = 2. The structure was refined by full-matrix least-squares to a conventional R of 0.0466.     

Variation in coordinative property of two different N<Subscript>2</Subscript>O<Subscript>2</Subscript> donor Schiff base ligands with nickel(II) and cobalt(III) ions: characterisation and single crystal structure elucidation

A nickel(II) and a cobalt(III) complex of two different potentially tetradentate Schiff bases with different binding modes have been synthesised. The nickel(II) complex [NiL¹] · CH₃OH (1) was formed, on reacting the metal salt with a perfectly symmetrical N₂O₂ tetradentate Schiff base ligand H ₂ L ¹ , which is the 1:2 condensation product of 1,3-diamino propane and 2-hydroxyacetophenone. The cobalt(III) complex [Co(HL²)₃] · (ClO₄)₃ · H₂O (2) was synthesised using an asymmetric N₂O₂ tetradentate Schiff base ligand HL ² on condensing N,N-dimethyl-1,3-diamino propane with o-vanillin in 1:1 mmol ratio. Although both Schiff bases are N₂O₂ functionalised, they showed variation in their coordinative property with nickel(II) and cobalt(III) ions. Both the complexes were characterised by IR spectroscopy and cyclic voltammetry and their single crystal structures clearly indicate that 1 is a mononuclear species whereas 2 is a hydrogen-bonded dimer.     

The influence of Ce3+ ions on the corrosion rate of stainless steel in acidic solutions of different pH-values

The corrosion resistance of AISI 420 stainless steel in 0.1 mol L^?1 H₂SO₄ + 0.1 mol L^?1 Na₂SO₄ solutions at different pH-values and the inhibiting effect of Ce³⁺ ions was studied using electrochemical polarization methods. The results reveal decreasing of the corrosion rate with an increasing the pH of the solution, which demonstrates the progressive protective character of the inhibitor used. At pH lower than 3.33, the corrosion inhibition was most probably a result of the competitive adsorption of Ce³⁺ with H⁺ ions on the cathodic sites of the electrode surface, and it was found to be dependent on the relative concentration of H⁺/Ce³⁺. The peroxide generated from the oxygen reduction reaction at pH 3.33 was found to be capable oxidize trivalent cerium (Ce) to the tetravalent state. As obtained hydroxide precipitates act as diffusion barrier hindering the corrosion processes, whereafter a spontaneous passivity occurs on the steel surface at this pH.     

New Ni(II) Ion-Selective Electrode Based on the N-S Schiff Base Ligand as Neutral Carrier in PVC Matrix

Abstract

A nickel(II) [Ni(II)] ion-selective electrode was prepared by incorporating a new N-S Schiff base ligand, glyoxal-bis(S-benzyldithiocarbazate) (GBSB), as a neutral carrier into the PVC matrix. The proposed electrode exhibits an excellent near-Nernstian response for Ni²⁺ ions, ranging from 2.8 × 10^?7 to 1.0 × 10^?1 mol/L with a detection limit of 1.2 × 10^?7 mol/L and a slope of 31.9 ± 0.3 mV/dec in pH 4.0 nitrate buffer solution at 25°C. It has an appropriate response time and suitable reproducibility and can be used for at least 3 months. The operational pH range of the proposed electrode is 4.0–7.5. The response mechanism is discussed in view of the alternating current (AC) impedance technique. In addition, the electrode was successfully used as an indicator electrode in potentiometric titration of Ni²⁺ ion and in the direct determination of Ni²⁺ ion in milk power and chocolate samples.     

Graphene oxide-packed micro-column solid-phase extraction combined with flame atomic absorption spectrometry for determination of lead (II) and nickel (II) in water samples

A sensitive and simple method has been established for simultaneous preconcentration of trace amounts of Pb (II) and Ni (II) ions in water samples prior to their determination by flame atomic absorption spectrometry. This method was based on the using of a micro-column filled with graphene oxide as an adsorbent. The influences of various analytical parameters such as solution pH, adsorbent amount, eluent type and volume, flow rates of sample and eluent, and matrix ions on the recoveries of the metal ions were investigated. Using the optimum conditions, the calibration graphs were linear in the range of 7–260 and 5–85 μg L^?1 with detection limits (3S_b) of 2.1 and 1.4 μg L^?1 for lead and nickel ions, respectively. The relative standard deviation for 10 replicate determinations of 50 μg L^?1 of lead and nickel ions were 4.1% and 3.8%, respectively. The preconcentration factors were 102.5 and 95 for lead and nickel ions, respectively. The adsorption capacity of the adsorbent was also determined. The method was successfully applied to determine the trace amounts of Pb (II) and Ni (II) ions in real water samples. The validation of the method was also performed by the standard reference material.     

Lanthanide Recognition: Development of an Asymetric Gadolinium Microsensor Based on N-(2-pyridyl)-N′-(4-nitrophenyl)thiourea

Abstract

The first asymmetric potentiometric Gd(III) microsensor is reported here. N-(2-Pyridyl)-N′-(4-nitrophenyl)thiourea (PyTu₄NO₂) was found to have a very selective and sensitive behavior toward Gd(III) ions, in comparison to other lanthanide ions as well as inner transition and representative metal ions and hence was used as a sensing material in the construction of a Gd(III) microelectrode. The Gd(III) sensor exhibits a Nernstian slope of 17.46 ± 0.3 mV per decade over the concentration range of 1.0 × 10^?8 to 1.0 × 10^?3 M and a detection limit of 3.0 × 10^?9 M of Gd(III) ions. The potentiometric response of the sensor is independent of the solution pH in the range of 4.0–9.0. It manifests advantages of low detection limit and fast response time (10–15 s).     

Titanium‐implanted CaTiO3 films and their changes in Hanks' solution

Titanium‐implanted CaTiO₃ film was prepared and then characterized by x‐ray photoelectron spectroscopy (XPS) and Rutherford backscattering spectrometry (RBS) before and after immersion in Hanks' solution for 7 days. An as‐prepared specimen contained a small amount of Ar implanted during sputtering, although the pressure was as low as 10^?4 Torr. Even though Ar convolution increased with an increase in the relative Ti ion dose, most of the convoluted Ar was not from the Ar gas used for Ti ion production but rather was from the Ar gas used for sputtering the CaTiO₃. During Ti implantation, the CaTiO₃ films were ion‐etched by Ti ions. The composition of the CaTiO₃ film was not changed to any great degree by the Ti implantation, however its properties changed considerably. After immersion in Hanks' solution, the thickness of the specimen not implanted with Ti decreased the most whereas the [Ca]/[P] ratio, which was nearly unity before exposure, decreased significantly, becoming 0.23 on the Ti‐implanted specimen prepared at 200 W and 0.13 on the Ti‐implanted specimen prepared at 50 W. It was also observed by XPS that the ratio [Ca]/[P] was ～1.9 for all Ti‐implanted specimens after immersion in Hanks' solution for 7 days. Judging from the binding energies of Ca 2p_3/2 and P 2p electrons and the [Ca]/[P] ratio, it was suggested that a hydroxyapatite‐like substance had formed on the surfaces of the Ti‐implanted specimens after immersion in Hanks' solution. Copyright © 2003 John Wiley & Sons, Ltd.     

Study on corrosion resistance of electroplating zinc–nickel alloy coatings

Electrodeposited zinc–nickel alloy coatings have been widely adopted for surface treatment of automobile body steel sheet for high corrosion resistance. The corrosion behavior of the coatings has been related with the components of nickel, and the zinc–nickel alloy passive coatings have much higher corrosion resistance than that of zinc–nickel alloy coatings. In the present paper, the corrosion resistance behavior of the zinc–nickel alloy coatings obtained by new process and formulation has been studied by means of the electrochemistry test and neutral salt spray test. And it is discovered that the properties of corrosion resistance of zinc–nickel alloy passive coatings were better than that of zinc passive coatings, Cadmium passive coatings and alloys of electrodeposited cadmium–titanium. The components of corrosion productions, in terms of X‐ray diffraction (XRD), are mainly ZnO, ZnCl₂ · 4Zn(OH)₂ and small quantity of 2ZnCO₃· 3Zn(OH)₂. The component of zinc–nickel alloy coatings has been investigated with Glow Discharge Optical Emission Spectrometry (GDA‐750). And it is found that as the thickness of zinc–nickel alloy coatings increases, the component of zinc increases from beginning to end, but the peak value of nickel appears and an enrichment of nickel in the coatings comes into being. Because the electrodeposited zinc–nickel alloy coatings exhibit different alloy phases as a function of their alloy composition, in this paper, the crystal structure changing with the different component of nickel has been studied in terms of XRD. The result shows that electrodeposited zinc–nickel alloy has different phases: α‐phase, a solid solution of zinc in nickel with an equilibrium solubility of about more than 79% nickel; γ‐phase, an intermediate phase with a composition Ni₅Zn₂₁; η‐phase, a solid solution of nickel in zinc with less than 5% nickel; and δ‐phase (Ni₃Zn₂₂) appeared from η‐phase to α‐phase with increasing content of nickel. Copyright © 2009 John Wiley & Sons, Ltd.     

Complexation of Nickel Ions by Boric Acid or (Poly)borates

An experiment based on electrochemical reactions and pH monitoring was performed in which nickel ions were gradually formed by oxidation of a nickel metal electrode in a solution of boric acid. Based on the experimental results and aqueous speciation modeling, the evolution of pH showed the existence of significant nickel–boron complexation. A triborate nickel complex was postulated at high boric acid concentrations when polyborates are present, and the equilibrium constants were determined at 25, 50 and 70 °C. The calculated enthalpy and entropy at 25 °C for the formation of the complex from boric acid and Ni²⁺ ions are respectively equal to (65.6 ± 3.1) kJ·mol^?1 and (0.5 ± 11.1) J·K^?1·mol^?1. The results of this study suggest that complexation of nickel ions by borates can significantly enhance the solubility of nickel metal and nickel oxide depending on the concentration of boric acid and pH. First principles calculations were investigated and tend to show that the complex is thermodynamically stable and the nickel cation in solution should interact more strongly with the \( {\text{B}}_{3} {\text{O}}_{3} \left( {\text{OH}} \right)_{4}^{ - } \) than with boric acid.     

Thermodynamic characteristics of complex formation by Ni2+ ions and glycylglycine in aqueous solutions of KNO3 at 288–308 K

Heat effects of the interaction between glycylglycine and nickel (II) nitrate solutions are measured by direct calorimetry at different pH values and metal: ligand ratios in the temperature range of 288.15 to 308.15 K. KNO₃ is used as the background electrolyte. The heat effects of diluting the nickel nitrate solution in solutions of the background electrolyte are determined in order to make the appropriate corrections. The standard thermodynamic characteristics of complex formation by peptides and nickel (II) ions in aqueous solution are calculated. Standard enthalpies of the formation of complex particles NiPep⁺, NiPep₂, and NiPep ₃ ^? are determined for the first time.     

Synthesis and Structures of 3,5-disubstituted 1,2,4-triazole Head Units and Incorporation of 3,5-dibenzoyl-1,2,4-triazolate into New [2 + 2] Schiff-Base Macrocyclic Complexes

The synthesis and characterization of sodium 3,5-diacetyl-1,2,4-triazolate (4 ^Me ) and sodium 3,5-dibenzoyl-1,2,4-triazolate (4 ^Ph ), both of which can be used as head unit building blocks in Schiff-base reactions, are reported. The crystal structures of sodium 3,5-diacetyl-1,2,4-triazolate, as [4 ^Me (H₂O)]_∞, and sodium 3,5-dibenzoyl-1,2,4-triazolate, as [4 ^Ph (CH₃OH)₂]₂, have been determined. The former is a helical polymer whilst the latter is a methanol-bridged dimer. The lead(II) templated cyclization reaction of sodium 3,5-dibenzoyl-1,2,4-triazolate (4 ^Ph ) with 1,3-diaminopropane or 1,4-diaminobutane, respectively, leads to the formation of two new [2 + 2] Schiff-base macrocycles as their lead(II) complexes, [Pb₂ L ^3Ph (μ-OH)]ClO₄ (5) and [Pb₂ L ^4Ph (μ-OH)]ClO₄ (6), respectively. Transmetallation of 5 with nickel(II) ions yields a novel, structurally characterized, dinickel(II) macrocyclic complex, [Ni₂ L ^3Ph (NCS)₂] (7), which features double triazolate bridging of the two five-coordinate nickel(II) ions.     

Synthesis,structures, and characterization of copper(II), nickel(II), and cobalt(III) metal complexes derived from an asymmetric bidentate Schiff-base ligand

An asymmetric bidentate Schiff-base ligand (2-hydroxybenzyl-2-furylmethyl)imine (L–OH) was prepared. Three complexes derived from L–OH were synthesized by treating an ethanolic solution of the appropriate ligand with an equimolar amount of metallic salt. Three complexes, Cu₂(L–O^?)₂Cl₂ (1), Ni(L–O^?)₂ (2) and Co(L–O^?)₃ (3), have been structurally characterized through elemental analysis, IR, UV spectra and thermogravimetric analysis. Single crystal X-ray diffraction shows metal ions and ligands reacted with different proportions 1?:?1, 1?:?2 and 1?:?3, respectively, so copper(II), nickel(II), and cobalt(III) have different geometries.     

Piperazine-based new sensor: selective ratiometric sensing of Fe3+, logic gate construction and cell imaging

Newly designed and synthesised chemosensor 1 selectively recognises Fe³⁺ ions in CHCl₃–MeOH (1:1, v/v) by showing ratiometric change in emission and green colouration of the solution under the exposure of UV light. The ensemble 1·Fe³⁺ selectively detects F^?  ions over other halides and the phenomenon is useful to construct combinatorial logic gate. Furthermore, the probe 1 can be used for in vitro detection of Fe³⁺ in human cervical cancer (HeLa) cells.     

The Structure of Nickel(Ii) and Copper(Ii) Complexes with 1,4,8,11-Tetraazacyclotetradecanein Aqueous Solution as Studied by the X-Ray Diffraction Method

The structure of 1,4,8,11-tetraazacyclotetradecane (cyclam) complexes with nickel(II) and copper(II) ions in aqueous solution has been determined by the x-ray diffraction method at 25°C. The [Ni-(cyclam)]²⁺ complex has a square-planar structure with four nitrogen atoms of the cyclam, and the Ni-N bond length has been determined to be 198 pm. Upon the addition of ammonia, the color of the nickel(II)-cyclam solution turns to deep purple and the [Ni(NH₃)₂(cyclam)]²⁺ complex is formed. The complex has a regular octahedral structure with an additional two NH₃ molecules along the axis vertical of the cyclam plane, and the Ni-N (NH₃ and cyclam) bond lengths are 209 pm. The copper(II)-cyclam complex in the aqueous solution is a distorted octahedron with two water molecules along the elongated axis. The axial Cu—O and equatorial Cu—N bond lengths are 277 and 210 pm, respectively.     

Structural Insights into the Coordination and Extraction Mechanism of Nickel(II) with Dinonylnaphthalene Sulfonic Acid and n‐Hexyl 3‐Pyridinecarboxylate Ester as Extractants

In this work, a nickel(II) synergist complex with methyl isonicotinate (B^I, a short chain analog of n‐hexyl 3‐pyridinecarboxylate ester) and naphthalene‐2‐sulfonic acid (HNS, a short chain analog of dinonylnaphthalene sulfonic acid) was synthesized and studied by single‐crystal X‐ray diffraction. The nickel(II) complex crystallizes in the monoclinic P 2₁/n space group with the composition [Ni(H₂O)₄(B^I)₂](NS)₂·2H₂O. The Ni(II) ions of these crystallographically independent molecules lie on an inversion center, forming a trans‐form distorted octahedral coordination structure. The nickel(II) ions can coordinate with four water molecules and two B^I ligands, resulting in a mono‐metallic structure [Ni(H₂O)₄(B^I)₂]²⁺. There is no direct interaction between nickel(II) and sulfonic oxygen atoms of the sulfonate anions, but hydrogen bonds form between sulfonic oxygen atoms and water molecules in the synergist complex. In order to further elucidate the solution structure of the nickel(II) complexes with the actual synergistic mixture containing n‐hexyl 3‐pyridinecarboxylate ester and dinonylnaphthalene sulfonic acid in the nonpolar organic phase, the nickel(II) complexes were studied by electrospray ionization mass spectrometry. The results indicated that the extracted nickel(II) complexes in the nonpolar solvent have a similar coordination structure as that of the crystalline nickel(II) synergist complex.     

Sorption of nickel on chitosan

The sorption of nickel on chitosan was studied using batch method. As a tracer was used radioisotope ⁶³Ni. The effect of pH and contact time to reach sorption equilibrium was investigated. During the sorption of Ni²⁺ ions occur mostly to ion-exchange reactions on the surface of sorbent. The time to reach the sorption equilibrium of nickel on chitosan was 14 h. The percentage of sorption after 14 h achieved the value of 84 %. On the sorption of nickel used solutions with initial pH in the range from 3.9 to 8.1. In the monitored range of pH after 24 h of contact was the sorption of nickel on chitosan >97 %. The sorption of nickel was reduced by increasing concentrations of Ni²⁺ ions in the solution. The experimental data for sorption of nickel have been interpreted in the term of Langmuir isotherm and the value of maximum sorption capacity of nickel on chitosan was 2.71 × 10^?3 mol g^?1.