Determination of Traces of Vanadium with 5-Bomosalicylhydroxamic Acid by Solid-Phase Spectrophotometry

Abstract

A microdetermination method at μg 1^?1 levels for vanadium by solid-phase spectrophotometry has been developed. 5-Bromosalicylhydroxamic acid was used as chromogenic reagent to form a 1:2 violet complex which is easily sorbed and concentrated on a dextran-type anion-exchange resin. The resin-phase absorbances at 560 and 850 nm were measured directly. Vanadium can be determined in the 5 - 60 μg 1^?1 range with a RSD of 4.3%. The method is applied to the determination of vanadium in pet roleiim crudes and natural water, samples.     

Substituierte 5-Hydroxypyrimidine und ihre O,O-Diethylphosphorsäure-, O,O-Diethylthiophosphorsäure-und N,N-Dimethylcarbamidsäureester

4-Alkyl (or aryl)-6-chloro-5-hydroxy-2-methylpyrimidines5a–5e, 4-alkyl (or aryl)-5-hydroxy-2-methyl-1H-pyrimidin-6-ones5g–5k and 6-alkyl (or aryl)-5-hydroxy-1H,3H-pyrimidin-2,4-diones5l–5n were prepared and converted into O,O-diethylphosphoric acid esters7a–7e, O,O-diethylphosphorothioic acid esters7f–7i and N,N-dimethylcarbamic acid esters8.

     

Palladium-catalysed aminocarbonylation of 17-iodo-5α-androst-16-ene with L-amino acid esters in ionic liquids

Ionic liquids were effectively used as solvents in palladium catalysed aminocarbonylation of 17-iodo-5α-androst-16-ene (1) with L-amino acid esters. The Pd(OAc)₂ + phosphine catalysts could be recirculated with small loss of activity.     

Oxidative Diels-Alder reaction of 2, 5-dihydroxybenzoic acid with 1, 3-cyclopentadiene

The electrochemical oxidation of 2,5-dihydroxybenzoic acid (1) has been studied in the presence of 1,3-cyclopentadiene (2) as a diene in water/ethanol (40/60, v/v) mixture using cyclic voltammetry and controlled-potential coulometry. A plausible mechanism for the oxidation of 1 in the presence of 2 is presented. Compound 1 was converted into bis-adduct 5 via electrooxidation, Diels-Alder reaction of 2 to anodically generated 3,6-dioxocyclohexa-1,4-dienecarboxylic acid (1ox), decarboxylation reaction, electrooxidation and Diels-Alder reaction. The electrochemical synthesis of 5 was performed in a onepot reaction, without toxic reagents, at a carbon electrode in a simple cell using an environmentally friendly method.     

The green synthesis of 2,3-dihydroquinazolin-4(1H)-ones via direct cyclocondensation reaction under catalyst-free conditions

ABSTRACT

A simple and environmentally benign method is described for the synthesis of 2,3-dihydroquinazolin-4(1H)-ones by direct cyclocondensation of 2-aminobenzamide with aromatic aldehydes using water as the reaction medium. The parameters such as temperature, substrate molar ratio and reaction time were examined to establish the optimal synthetic process. The present procedure has advantages of low cost, mild reaction conditions, simple workup process, simply purification, excellent yields and no use of catalyst and hazardous organic solvents.     

Flow Injection Analysis Using Potassium Permanganate: An Approach for Measuring Chemical Oxygen Demand in Organic Wastes and Waters

Abstract

A rapid and continuous analytical method based on flow injection analysis was developed for the determination of chemical oxygen demand due to organic substances in water pollution. Potassium permanganate and sulfuric acid solutions were individually pumped up as an oxidizing agent and glucose was used as a standard substance. The results for filtered organic waste and water samples were as reasonable as compared to those measured by the manual acidic permanganate method.     

Untersuchung Der Kcmplexbildung Von Thallium(III) Mit 1-Phenyl-3-Methyl-4-Benzoylpyrazolon-5

Abstract

A study has been made of the method used for extracting the complex formed between thallium(III) and PhMBP. It has been demonstrated that thallium(III) can be readily extracted as a complex with PhMBP by organic solvents at low pH. The extraction of thallium(III) has been studied as a function of pH, concentration of reagent, nature of solvent, duration of contact of the phases and concentration of thallium(III). It has been established that thallium(III) forms a complex with PhMBP of the type MA_n, where n=3. The stability constants and distribution constant of the neutral complex has been calculated by the method of Leden-Rydberg.     

Synthesis and characterization of hydrophilicity-controlled poly(arylene ether sulfone) copolymers with phenolphthalein-based carboxylic acid groups for separation membrane applications

Abstract

Hydrophilicity-controlled poly(arylene ether sulfone) copolymers with phenolphthalein-based carboxylic acid groups (PES-COOH-X) were synthesized via direct copolymerization by adjusting the feed molar ratio. The chemical structures of the obtained copolymers were confirmed by ¹H nuclear magnetic resonance (NMR) spectroscopy. The copolymers showed good solubility in common aprotic solvents and exhibited excellent mechanical properties. The water contact angles of the obtained copolymers could be reduced by approximately 52% from 92.1° to 44.2° with increasing content of phenolphthalein-derived monomer, 2-[bis(4-hydroxyphenyl)methyl] benzoic acid (PPH-COOH), in the feed molar ratio. A series of PES-COOH-X membranes was prepared via a conventional immersion precipitation phase inversion method. The effects of the monomer feed molar ratio on the morphology, hydrophilicity, pure water flux, and water uptake of the prepared membranes were investigated. The results showed that the pure water flux of the PES-COOH-X membranes was significantly enhanced by almost a factor of two as compared to the pristine PES membrane. From the water contact angle data, it was identified that the hydrophilicity of the membranes was increased rapidly with increasing PPH-COOH content in the membranes. These hydrophilicity-controlled poly(arylene ether sulfone) copolymers may be considered as good candidates for separation membrane materials.     

The Proton Dissociation of Bio-Protic Ionic Liquids: [AAE]X Amino Acid Ionic Liquids

[AAE]X composed of amino acid ester cations is a sort of typically “bio-based” protic ionic liquids (PILs). They possess potential Brønsted acidity due to the active hydrogens on their cations. The Brønsted acidity of [AAE]X PILs in green solvents (water and ethanol) at room temperature was systematically studied. Various frameworks of amino acid ester cations and four anions were investigated in this work from the viewpoint of structure–property relationship. Four different ways were used to study the acidity. Acid dissociation constants (pK_a) of [AAE]X determined by the OIM (overlapping indicator method) were from 7.10 to 7.73 in water and from 8.54 to 9.05 in ethanol. The pK_a values determined by the PTM (potential titration method) were from 7.12 to 7.82 in water. Their Hammett acidity function (H₀) values (0.05 mol·L⁻¹) were about 4.6 in water. In addition, the pK_a values obtained by the DFT (proton-transfer reactions) were from 7.11 to 7.83 in water and from 8.54 to 9.34 in ethanol, respectively. The data revealed that the cationic structures of [AAE]X had little effect and the anions had no effect on the acidity of [AAE]X. At the same time, the OIM, PTM, Hammett method and DFT method were reliable for determining the acidic strength of [AAE]X in this study.     

A new furan derivative from an endophytic Aspergillus flavus of Cephalotaxus fortunei

A new furan derivative named 5-acetoxymethylfuran-3-carboxylic acid (2), together with a known furan compound, 5-hydroxymethylfuran-3-carboxylic acid (1), were isolated from the fermentation of Aspergillus flavus, endophytic fungi in Cephalotaxus fortunei. The structures of 1 and 2 were elucidated by NMR, IR, UV and MS data, as well as compared with literature data. The compounds 1 and 2 exhibited potent antibacterial activity against Staphylococcus aureus with MIC values of 31.3 and 15.6 μg/mL, respectively. The compound 2 showed moderate antioxidant activity.     

Synthesis of Novel 2-(4-Oxo-3,4- Dihydroquinazolin-2-Ylsulfinylmethyl)-3H-Quinazolin-4-One

Abstract

Condensation of 2-mercapto-3H-quinazolin-4-one (1) with chloroacetic acid gave 4-oxo-3,4-dihydroquinazoline-2-yl-sulfanyl)-acetic acid (2) that with anthranilamide (3) gave 2-(4-oxo-3,4-dihydroquinazolin-2-ylsulfanylmethyl)-3H-quinazolin-4-one (4). Oxidation of 4 with sodium hypochlorite in alkaline medium gave the novel product, 2-(4-oxo-3,4- dihydroquinazolin-2-ylsulfinyl methyl)-3H -quinazolin-4-one) (5). The entire sequences of reactions in this work have been carried out using eco-friendly solvents and green conditions.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

A Closer Look at the Hydroiodination of Propiolic Acid

The crystal structures of cis‐3‐iodoacrylic acid (1), trans‐3‐iodoacrylic acid (2), trans‐3‐iodoacrylic acid methyl ester (3), 3,3‐diiodopropanoic acid (4), and trans‐2,3‐diiodoacrylic acid (5) are reported. Compounds 1 and 2 are the kinetic and thermodynamic products, respectively, of the hydroiodination of propiolic acid. Compound 4 results from addition of a second equivalent of hydroiodic acid to 1 or 2, whereas 5 results from the addition of trace elemental iodine to propiolic acid.     

Assessment of ethanol and acetonitrile in 18F-FDG preparations by means of liquid chromatography

Introduction Acetonitrile (ACN) and ethanol (EtOH) are common solvents used in radiopharmaceutical production. In accordance to official compendia, the concentration of these solvents should be assessed by gas chromatography. In the present paper, an optimized method, based on Koziorowski (2010), is validated. Methods ACN and EtOH concentrations and retention times (Rt) were obtained by a HPLC system equipped with a refractive index detector (RID), an ion exclusion column and ultrapure water as mobile phase. The methodology was validated following the ICH Q2(R1) requirements. Results The solvents EtOH and ACN were eluted at 23.22 and 26.32 minutes, respectively, with a final run time of 30 minutes. The validation parameters (accuracy, precision, linearity, specificity, robustness, detection and quantification limits) were obtained. Conclusions A reproducible HPLC method for the quantification of residual solvents in preparations of 2-deoxy-2-[fluorine-18]fluoro-D-glucose (¹⁸F-FDG) was described and validated. The method was precise, accurate, selective, robust and linear over a wide range. In addition, this method showed a high sensitivity, with limits of detection and quantitation comparable to the usual methods by gas chromatography.     

Improved Procedure for Determining Free and Conjugated Indole-3-Acetic Acid by a Spectrofluorimetric Kinetic Method

Abstract

The Indole-3-acetic acid (IAA), ester-and amide-linked IAA in peach seeds were determined by a kinetic method based on the measurement of the Indole-α-pyrone derivative of the free acid. The free acid concentration was 355 ng/g of fresh weight, the concentrations for the ester-and amide-conjugated IAA were 877 and 1785 ng/g of fresh weight, respectively. The relative standard deviation was always less than 15%.     

Specific and non-specific interactions of hydropseudohalic acids with water and organic solvents

Partition coefficients P of the HNCS, HNCO and HN₃ hydropseudohalic acids between a number of organic solvents and water were determined. It has been found that log P increases with pKa of the acid and with the basicity of the solvent, but the effect of pKa on P is the smaller the more basic is the solvent. The relationships have been explained in terms of hydrogen bond formation between undissociated acid and solvent molecules. H-bonding between the pseudohalic acids and organic solvents has been confirmed by IR spectra on the example of HN₃ in benzene. Association constants for H-bonding between the three acids and water, benzene, dibutyl ether and tri-n-butyl phosphate were determined from partition data. It has been found that H-bonding increases with the strength of the acid, whereas the contribution to partition from non-specific interactions with water and organic solvents depends on the molecular surface area of the acid molecule.     

Spectrofluorimetric Determination of Nitrite with Pyridoxal-5-Phosphate-2-Pyridylhydrazone

Abstract

The nitrite ion oxidizes pyridoxal-5-phosphate-2-pyridyl-hydrazone in acid medium giving a fluorescent product (λ_ex 325 nm, λ_em 420 nm). This redox reaction is used to developed a spectrofluorimetric method for the determination of nitrite. The calibration graph is liner in the 0.1 ? 1.0 μg mL^?1 range. The interference levels, stoichiometry and nature of the reaction have been studied. The method is applied to determine nitrite in water and soil samples     

Determination of the Phytohormone Indole-3-Acetic Acid by Synchronous Derivative Spectrofluorometry Following Acetic Anhydride Derivatization

Abstract

The very selective fluorogenic reaction of indole-3-acetic acid (IAA) with acetic anhydride, acid catalyzed, is used to perform an improved fluorometric method for the determination of nanogram amounts of IAA. The synchronous derivative approach used in this work provides significant advantages in the more relevant analytical figures of merit, especially in sensitivity and precision.     

Epoxidation of Polyunsaturated Fatty Acid Double Bonds by Dioxirane Reagent: Regioselectivity and Lipid Supramolecular Organization

The use of dimethyldioxirane (DMD) as the epoxidizing agent for polyunsaturated fatty acids was investigated. With fatty acid methyl esters, this is a convenient method for avoiding acidic conditions, using different solvents, and simplifying the isolation procedures, with less contamination due to by‐products. The reagent was also tested with free fatty acids in water. In this case, the supramolecular organization of fatty acids influenced the reaction outcome, and the epoxidation showed interesting regioselective features. The C?C bonds closest to the aqueous‐micelle interface is the most favored for the interaction with dimethyldioxirane. The preferential epoxidation of linoleic acid (= (9Z,12Z)‐octadeca‐9,12‐dienoic acid) to the 9,10‐monoepoxy derivative was achieved, with a high yield and 65% regioselectivity. In case of arachidonic acid (= (5Z,8Z,11Z,14Z)‐eicosa‐5,8,11,14‐tetraenoic acid) micelles, the regioselective outcome with formation of the four possible monoepoxy isomers was studied under different conditions. It resulted to be a convenient synthesis of ‘cis‐5,6‐epoxyeicosatrienoic acid’ (= 3‐[(2Z,5Z,8Z)‐tetradeca‐2,5,8‐trienyl]oxiran‐2‐butanoic acid), whereas in reverse micelles, epoxidation mostly gave ‘cis‐14,15‐epoxyeicosatrienoic acid (= (5Z,8Z,11Z)‐13‐(3‐pentyloxiran‐2‐yl)trideca‐5,8,11‐trienoic acid).     

Laser photolysis of 1-(4-nitrophenyl)-3-methylpyrazole and 1-ethyl-3-(4-nitrophenyl)-5-chloropyrazole

The spectral kinetic characteristics of the triplet states of 1-(4-nitrophenyl)-3-methylpyrazole (1) and 1-ethyl-3-(4-nitrophenyl)-5-chloropyrazole (2) were studied by the laser nanosecond photolysis technique in different solvents. The triplet lifetimes (τ_T) of molecules 1 and 2 were found to depend strongly on the solvent nature. An increase in τ_T by approximately two orders of magnitude on going from nonpolar and polar aprotic solvents (τ_T ≤ 15 ns) to aqueous-acetonitrile solutions (τ_T = 1100 ns for a volume acetonitrile to water ratio of 1 : 3) was analyzed, taking into account the influence of the medium on the relative contribution of the n,π*- and π,π*-configurations to the lowest triplet state. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1115–1119, May, 2005.