A Highly Sensitive Method for Determination of Copper (II) in Water Samples for Field Screening

Abstract

A new method has been developed for field screening of copper (II) in water samples, which is based on an enzyme inhibition reaction between copper (II) and nitrate reductase. The concentration of copper (II) was acquired by indirect determination the reaction product (nitrite) with a mini optical reflection sensor. Under the optimum conditions, the calibration graph was linear in the range of 5.0–50 ng mL^?1. The limit of detection was 0.5 ng mL^?1. This method has been used for the field screening of copper (II) with satisfactory results.     

Diazotised 4-Nitroaniline as a Chromogenic Reagent for the Determination of Indole Derivatives in Certain Pharmaceutical Preparations

Abstract

A sensitive colorimetric method has been devised for microdetermination of six indole derivatives; ergotamine tartrate, methylergometrine maleate, dihydroergocornine methanesulphonate, dihydroergocristine methanesulphonate, dihydroergocryptine methanesulphonate and pindolol, both in pure form and in pharmaceutical preparations. The method is based on the reaction of indole moiety with diazotised 4-nitroaniline in buffer solution of pH 6 to produce a stable yellow monoazo dye. Beer's law is obeyed over final concentration ranges 8–32 μgm1^?1 for ergotamine tartrate, 4–48 μgml^?1 for methylergometrine maleate, 8–56 μgml^?1 for dihydro-ergot alkaloids and 1–10 μgml^?1 for Pindolol with apparent molar absorptivity range (7.62 × 10³?2.61 × 10⁴) 1.mole^?1.cm^?1. A study has been made to determine the optimum conditions of the colour reaction.     

A New Spectrophotometric Method for the Determination of Arsenic in Environmental and Biological Samples

Abstract

A simple and selective spectrophotometric method has been developed for the determination of trace amounts of arsenic using azure B as a chromogenic reagent. The proposed method is based on the reaction of arsenic(III) with potassium iodate in acid medium to liberate iodine. The liberated iodine bleaches the violet color of azure B and is measured at 644 nm. This decrease in absorbance is directly proportional to the As(III) concentration, and Beer's law is obeyed in the range 0.2–10 µg ml^?1 of As(III). The molar absorptivity, Sandell's sensitivity, detection limit, and quantitation limit of the method were found to be 1.12×10⁴ l mol^?1cm^?1, 6.71×10^?3 µg cm^?2, 0.02 µg ml^?1 and 0.08 µg ml^?1, respectively. The optimum reaction conditions and other analytical parameters were evaluated. The proposed method has been successfully applied for the determination of arsenic in various environmental and biological samples.     

Determination of Sulphide in Sewage Effluents Using a New Spectrophotometric Method

Abstract

A suitable indirect spectrophotometric method for the determination of sulphide in water, based on the reduction of 1,2-naphthoquinone-4-sulphonate (NS) has been developed. The excess of NS is spectrophotometrically determined based on the red colour produced in its reaction with sulphanilic acid at pH 4.0–6.5. Maximum colour intensity is obtained after 40 min and the apparent molar absorptivity at 470mm is 3.5×10³I.mol^?1.cm^?1. The sulphide concentrations can be calculated by the difference in absorption of blanks and samples.     

Flow-Injection Determination of Glucose by a Photoinduced Chemiluminescent Reaction

Abstract

A flow-injection procedure for the photochemical determination of glucose has been developed. The method is based on the photo-oxidation of glucose sensitized by 9,10-anthraquinone-2.6-disulfonate (disodium salt). The hydrogen peroxide formed in the photochemical reaction was measured by means of the chemiluminescent reaction with luminol and hematin. A linear calibration graph was obtained over the range 2.0x10^?6-8.5 x 10^?5 mol L^?1. The method was applied to determining glucose in blood serum, urine and fruit juices.     

The Determination of Perphenazine by a New Simple Flow‐Injection Chemiluminescence Method

Abstract

A rapid and simple flow‐injection chemiluminescence (CL) method is described for the determination of perphenazine, which is based on the CL intensity that generated from the redox reaction of Ce (IV)-perphenazine in HNO₃ medium is proportional to the perphenazine concentration without any sensitizers. The proposed method allows the determination range within 1.0×10^?7–7.0 ×10^?5 g mL^?1 with a detection limit of 8.0×10^?8 g mL^?1, and it has been successfully applied to the determination of the perphenazine in pharmaceutical tablet compared well with the official method.     

Spectrophotometric Determination of Sparfloxacin in Pharmaceutical Preparations by Ternary Complex Formation with Pd(II) and Eosin

Abstract

A simple, sensitive, and direct spectrophotometric method has been developed for the assay of sparfloxacin in bulk and pharmaceutical preparations. The proposed method is based on the formation of ternary complex between an investigated drug, palladium(II) ion and eosin in the presence of methylcellulose as surfactant and acetate buffer of pH 4.2. Spectrophotometrically, under the optimum conditions, the ternary complex showed absorption maximum at 550 nm, with apparent molar absorptivity of 2.69×10⁴ l mol^?1 cm^?1, Sandell's sensitivity of 0.01458 µg ml^?1 and linearity in the concentration range 1.6–16 µg ml^?1. The composition of the ternary complex was studied by Job's method of continuous variation and the result indicated that the molar ratio of SPFX: Pd: eosin is 1∶1∶1. The optimum reaction conditions and other analytical parameters are evaluated. The proposed method was successfully applied for the determination of SPFX in its pharmaceutical product with mean percentage recoveries of 99.71%. The observed data has been subjected to statistical analysis, which revealed high accuracy and precision.     

1, 8-Dihydroxyanthraquinone-Ca(II) Reaction. Spectrofluorimetric Determination of Traces of Ca(II)

Abstract

1, 8-Dihydroxyanthraquinone (1, 8-DHAn) shows a fluorescent reaction with Ca(II) ion in ethanol-water mixtures and ammoniacal medium.

In the present work the 1, 8-DHAn-Ca(II) complex has been studied spectrofluorimetrically. The complex shows two excitation maxima at 485 nm and 495 nm and its emission maximum is centered at 615 nm. A 2:1 (R:C) stoichiometry and a log K_est of 7.38±0.22 for the overall equilibrium have been found for the complex.

A new method for the spectrofluorimetric determination of Ca(II) between 50 and 550 ngml^?1 has been proposed. The interference level of foreign ions has been established.     

Determination of Thallium in Soil

Abstract

A new spectrophotometric method is described for the determination of thallium in soil by extraction of Tl(III) with a toluene solution of N,N′-diphenylbenzamidine after acidification with 0.2–4.0 M HCl, and reaction of the extract with Crystal violet in the presence of 0.01–0.8 M HCl. The value of molar absorptivity of Tl(III)-X-CV complex (where X = Cl or Br; CV = Crystal violet) in toluene is 7.00 × 10⁴ 1 mole^?1 cm^?1 at the absorption maximum of 610 nm. The detection limit of the method is 20 ng ml^?1. The present method is free from interference of almost metal ions commonly associated with Tl. The method has been applied for analysis of the metal to soils.     

A Novel Method for the Determination of Streptomycin Using Sodium Nitroprusside as a Chromogenic Reagent by Spectrophotometry

Abstract

A rapid and simple spectrophotometric method for the determination of streptomycin has been developed and validated. The method was based on the reaction of streptomycin with sodium nitroprusside in the alkaline medium forming a red product measured at the maximum absorption of 495 nm. The stoichiometric ratio of the product is 1:1. Beer's law is obeyed in a range of 1.87 µg mL^?1 ～ 279.8 µg mL^?1 of streptomycin and ?₄₉₅ is 6.0 × 10³ L·mol^?1 cm^?1.Under the optimum condition, the equation of linear regression is A = 0.00742 + 0.05683 C (× 10⁵ mol·L^?1), with a linear correlation coefficient of 0.9990. The detection limit (3σ/k) is 0.96 µg mL^?1, the relative standard deviation (RSD) is 2.40%, and the average recovery rate is 98.3%–102.7%. Every parameter has been optimized, and the reaction mechanism has been studied. The proposed method has been successfully applied to the determination of streptomycin for injections and tablets of pharmaceutical preparation. Analytical results obtained by this new method were very gratifying.     

Selective Kinetic Spectrophotometric Determination of Nitrite in Food and Water

Abstract

A highly selective and sensitive method for the kinetic spectrophothometric determination of sub-microgram amounts of nitrite has been development based on its reaction with Nile blue 2B in acidic medium. The reaction is monitored spectrophotometrically at 595 nm at a fixed time of 4.5 min. The change in absorbance at 595 nm is related to the concentration of nitrite in the range 0.005 - 1.100 μg.ml^?1 The detection limit is 0.001 μg.ml^?1. The relation standard deviation is 1% for 0.020 μg.ml^?1 of nitrite for ten replicate measurements. Most common anions and cations do not interfere. The procedure was applied to the determination of trace amounts of nitrite in sausage and water.     

Spectrofluorimetric determination of cephradine in commercial formulation using ethylacetoacetate-formaldehyde as fluorogenic agent

A simple, precise and sensitive spectrofluorimetric method was developed for the determination of cephradine in pharmaceutical formulations. The method is based on reaction of cephradine with ethyl acetoacetate (EAA) in the presence of formaldehyde in acidic media. The fluorescence intensity of the resultant fluorescent derivative was measured at 443 nm after excitation at 350 nm. The effects of various experimental parameters on the formation of the fluorescent product were studied and optimized. A linear relationship between concentration of cephradine and fluorescence intensity was found over the range of 0.1–5.0 μg/mL. The limit of detection and quantification were calculated an found 1.09 × 10^?2 ± 3.64 × 10^?3 μg/mL and 3.64 × 10^?2 ± 3.64 × 10^?3 μg/mL, respectively and with relative standard deviation (RSD) 4.14%. Accuracy of the method was checked by standard addition method and applied to four different commercial formulations. The percentage recovery was found in the range of 97.03 to 103.80% for Velora suspension, 98.16 to 102.90% for velocef injection, 99.00 to 108.10% for Velora capsule and 99.06 to 104.90% for Cefradin capsule. The good percentage recoveries from all samples indicated that there were no interferences from the common excipients of formulations. The proposed method was successfully applied to the analysis of commercial suspension, capsule and injections. The result obtained by the proposed method was statistically validated with reference HPLC method. No significant difference in the results of the two methods was found regarding accuracy and precision using Student’s t-test and the variance ratio F-test.     

Flow Injection Analysis Spectrophotometric Determination of Platinum

Abstract

A new, simple, rapid, and selective procedure for the flow injection analysis (FIA) spectrophotometric determination of platement (Pt) is described. The method is based on the color reaction of Pt(IV) with SnCl₂ in the HCl medium. The mixed surfactants, i.e., cetylpyridinium chloride (CPC)+triton X‐100 (TX‐100) are used to enhance sensitivity of the method. The value of apparent molar absorptivity in the term of Pt is (3.00)×10³ L mol^?1 cm^?1 at absorption maximum, 405 nm. The detection limit (causing absorbance greater than 3×std. dev.) of the method is 150 ng/mL^?1. The optimum concentration range for the determination of Pt is 0.5–18 µg/mL^?1 with slope, intercept and correlation coefficient 0.0086, ?0.001, and +0.99, respectively. The sample throughput of the method is 120 samples/h^?1 at the flow rate of 3.7 mL/min^?1. The composition of the complex, and the reaction mechanism involved are discussed. The effect of FIA and analytical variables on the determination of the metal is optimized. The method has been tested for the analysis of Pt to the catalytic materials.     

Application of microwave-assisted micellar extraction combined with solid-phase microextraction and high-performance liquid chromatography with UV detection for the determination of organochlorine pesticides in different mud samples

Abstract

A sequential injection analysis method for the simultaneous spectrophotometric determination of phosphate and silicate has been developed. The method is based on the different reaction rates of the heteropolymolybdate formation reactions. Concentrations within the range 0.026—0.485 mmol P l^?1 and 0.125—2.848 mmol Si l^?1 have been determined at a frequency of 30 samples per hour. An R.S.D. of 2.1% was obtained for 0.162 mmol P l^?1 and of 1.1% for 1.424 mmol Si l^?1. The method was found to be suitable for the determination of phosphate and silicate in wastewater.     

Post‐chemiluminescence Method of the Determination of Loperamide Hydrochloride in Human Plasma and Pharmaceutical by Using Dichlorofluorescein as Chemiluminescence Reagent

Abstract

A post‐chemiluminescence (PCL) was observed when loperamide hydrochloride solution was injected into the reaction mixture after the finish of CL reaction of alkaline N‐Chlorosuccinimide (NCS) and dichlorofluorescein. Based on this phenomenon, a simple, sensitive and fast flow injection PCL method was established for the determination of loperamide hydrochloride. The possible mechanism for the PCL reaction was discussed via the investigation of the CL kinetic characteristics, the CL spectra, the fluorescence spectra. The PCL intensity responded linearly to the concentration of loperamide hydrochloride in the range 8.0×10^?10 to 6.0×10^?7 g · ml^?1 with a linear correlation of 0.9995. The detection limit was 4×10^?10 g · ml^?1. The relative standard deviation was 2.4% for 4.0×10^?8 g · ml^?1 loperamide hydrochloride (n=11). This method has been applied to the determination of loperamide hydrochloride in human plasma and pharmaceutical samples with satisfactory results.     

Flow-Injection Chemiluminescence Determination of Fluoroquinolones

ABSTRACT

A new flow-injection CL method was developed for the determination of fluoroquinolones including ofloxacin, norfloxacin, ciprofloxacin and lomefloxacin in pharmaceutical preparations, based on the chemiluminescence reaction of sulphite with cerium(IV) sensitized by these compounds. The linear ranges are 0.04 to 4.0 μg ml^?1 for ofloxacin and 0.4 to 40.0 μg ml^?1 for norfloxacin, ciprofloxacin and lomefloxacin, respectively. The detection limits are 0.016 μg ml^?1 for ofloxacin and 0.16 μg ml ^?1 for norfloxacin, ciprofloxacin and lomefloxacin, respectively. The relative standard deviations (RSD) are 2.1 to 2.6% (n=10) for these fluoroquinolones. The analytical procedure has been applied to the determination of the fluoroquinolones in pharmaceutical commercial formulations. The results are in agreement with those obtained by the official methods.     

New Spectrophotometric Method for the Determination of Titanium in Soil and Standard Geochemical Samples

Abstract

In the present communication a simple and rapid spectrophotometric method for the determination of titanium is described. The method is based on the reaction of Ti(IV) with a newly synthesized reagent, 6-(4-nitrophenylazo)-3,4,5-trihydroxy benzoic acid (NATHB), in ethanol medium at pH 3.2 to 4.2. The complex exhibits an absorption maximum at 495 nm and Beer's law is valid over the range of 0.04 – 1.00 μg.ml^?1 Ti. The molar absorptivity is 3.48 × 10⁴ dm³.mole^?1. cm^?1. Most of the foreign metal ions and anions do not produce any colorations with NATHB at selected conditions. Based on these results, a simple and direct spectrophotometric method with high selectivity and sensitivity was proposed. The method has been successfully applied for the determination of titanium in 5 soil and 3 standard geochemical samples.     

Integrated Retention/Spectrophotometric Detection Method for the Determination of Formaldehyde

Abstract

An integrated-sensor method for the determination of formaldehyde based on retention of the reaction product of the analyte with p-rosaniline and sulfite in a flow-cell packed with Dowex 1-X-8 anion exchange resin was developed. The method has a good selectivity with a detection limit of 0.3 μg ml^?1 (1 ml sample) or 75 ng ml^?1 (2 ml sample), and a linear range between 1–30 μg ml^?1. The relative standard deviations (n = 11) were 2.8 and 1.3% for 2 and 20 μg ml^?1 formaldehyde, respectively. Depending on the working conditions, the sampling frenquency ranged between 10 and 18 h^?1. The method was applied to the determination of formaldehyde in well water.     

Spectrophotometric Assay of Certain Aminoglycosides Using Cyanoacetamide

Abstract

A simple and sensitive ultraviolet spectrophotometric method has been devised for the determination of amikacin, kanamycin, neomycin and streptomycin in pure form and in some pharmaceutical preparations. The method depends on the nitrosation of the primary amino groups followed by reaction with cyanoacetamide in ammonia medium at 100°C for 30 min, The reaction products exhibit a characteristic absorption. maximum at 270 nm. Beer's law is obeyed within the concentration ranges 4–40 μg ml^?1 for amikacin, kanamycin and neomycin and 8–80 μg ml^?1 for streptomycin with apparent molar absorptivities of about 1.85 × 10⁴ for the first three compounds and 1.3×10⁴ 1. mole^?1.cm^?1 for streptomycin.     

Study On The Catalytic Reaction Of β-Cd-Hemin Using 2, 3, 4-Trichlorophenol As Substrate And Analytic Application

ABSTRACT|The catalytic activity of various mimetic enzymes instead of the peroxidase have been investigated by 4-aminoantipyrine (4-AAP) and 2, 3, 4-trichlorophenol (TCP) to form a dye utilizing hydrogen peroxide as hydrogen acceptor. The different Chlorophenolic derivatives, which act as a substrate in β-CD-hemin-H₂O₂-4-AAP catalytic reaction, have been systematically studied.|Meanwhile, the relationship of structure-effect for the β-CD-hemin as catalyst, and chlorphenols as substrate has been respectively discussed. The mechanism of catalytic reaction has been investigated. The results showed that β-CD-hemin was the best mimetic enzyme for peroxidase among those tested and TCP was a good substrate for the determination of hydrogen peroxide with β-CD-hemin. The method for the determination of hydrogen peroxide was proposed using 4-AAP-TCP system with β-CD-hemin as catalyst. A linear calibration graph was obtained over the H₂O₂ concentration of 4.8×10-^?8-7.7×10-^?5M, and the relative standard deviation at a H₂O₂ concentration of 2.8×10-^?5M was 2.5%. The apparent molar absorptivity of the chromogenic reaction for H₂O₂ was 1.54× 10⁴ L.mol-^?1.cm^?1. Satisfactory results were obtained in the determination of H₂O₂ in synthetic samples by this method.

Also, the method was coupled with the glucose oxidation reaction to determination glucose in human serum.