Reversed‐Phase High‐Performance Liquid Chromatography with Electrochemical Detection of Anthocyanins

Abstract

Anthocyanins, flavonoid compounds present in grapes and wines, were determined by reverse‐phase high‐performance liquid chromatography (RP‐HPLC) with electrochemical detection (RP‐HPLC‐ED). The method developed consists of RP‐HPLC gradient elution with voltammetric detection using a glassy carbon electrode after separation in an Inertsil ODS‐3V analytical column. Good peak resolution was obtained following direct injection of a 50 µL sample of anthocyanins in a mobile phase of pH 2.20. The results show that six different anthocyanins: cyanidin‐3‐O‐glucoside chloride (kuromanin chloride), cyanidin‐3,5‐di‐O‐glucoside chloride (cyanin chloride), malvidin‐3‐O‐glucoside chloride (oenin chloride), malvidin‐3,5‐di‐O‐glucoside chloride (malvin chloride), delphinidin‐3‐O‐glucoside chloride (myrtillin chloride), and peonidine‐3‐O‐glucoside chloride, all with antioxidant properties, can be separated in a single run by direct injection of solution. The limit of detection (LOD) for these compounds was lower than 0.3 µM. The method can also be applied to the analysis of these compounds in red wines and in skins and pulp extracts of red grapes, since all these antioxidants are electroactive.     

Electrochemical Detection of Epinephrine Based on a Screen-printed Electrode Modified with NiO−ERGO Nanocomposite Film

This study presents a new electrochemical sensor (NiO−ERGO/SPE) for sensitive and selective detection of epinephrine (EPI) on the screen-printed electrode (SPE) which is modified with a nanocomposite film consisting of electrochemically reduced graphene oxide and NiO nanoparticles. After surface functionalization, structural and electrochemical characterization of NiO−ERGO film, DPV signals of NiO−ERGO/SPE towards the oxidation of EPI exhibited a linear correlation in the concentration range of 0.025 μM to 175 μM with a detection limit of 0.015 μM, which reveals NiO−ERGO film is manifested a good electrocatalytic activity for EPI detection compared with the previous reports. The selectivity of NiO−ERGO film was also tested on a very wide scale of possible interferents (ascorbic acid, uric acid, dopamine, lactic acid, phenylalanine, tyrosine, tryptophan, Li⁺, Na⁺, K⁺, Ca²⁺, and Zn²⁺). Moreover, to evaluate the applicability of the proposed sensor for real sample analysis, NiO−ERGO/SPE was successfully utilized for the determination of EPI in pharmaceutical samples.     

A Sequence‐Selective Electrochemical DNA Biosensor Based on HRP‐Labeled Probe for Colorectal Cancer DNA Detection

Abstract

A highly‐sensitive sequence‐selective DNA sensor based on HRP‐labeled probe to detect specific K‐ras gene which is highly associated with colorectal cancer has been reported. Capture probe modified with–SH was first chemically adsorbed on the gold electrode through self‐assembly. Then, the hybridization of a complementary nucleic acid (target DNA:K‐ras gene) and HRP labeled oligonucleotide detection probe occurred in a sandwich way. Finally, H₂O₂ electroreduction current catalyzed by HRP was measured amperometrically in the presence of hydroquinon as mediator. The sequence selectivity is double guaranteed by the complementary hybridization of target DNA with capture and detection probes. The experimental conditions were optimized. The linear range is 1.17×10^?11～1.17×10^?7 mol l^?1 with a detection limit of 5.85×10^?12 mol l^?1. The electrode with capture probe can be reused after regeneration in boiling water.     

Electrochemical Modified Electrodes Based on Metal‐Salen Complexes

Abstract

A general view of the electroanalytical applications of metal‐salen complexes is discussed in this review. The family of Schiff bases derived from ethylenediamine and ortho‐phenolic aldehydes (N,N′‐ethylenebis(salicylideneiminato)—salen) and their complexes of various transition metals, such as Al, Ce, Co, Cu, Cr, Fe, Ga, Hg, Mn, Mo, Ni, and V have been used in many fields of chemical research for a wide range of applications such as catalysts for the oxygenation of organic molecules, epoxidation of alkenes, oxidation of hydrocarbons and many other catalyzed reactions; as electrocatalyst for novel sensors development; and mimicking the catalytic functions of enzymes. A brief history of the synthesis and reactivity of metal‐salen complexes will be presented. The potentialities and possibilities of metal‐Salen complexes modified electrodes in the development of electrochemical sensors as well as other types of sensors, their construction and methods of fabrication, and the potential application of these modified electrodes will be illustrated and discussed.     

The Reaction of Molybdenum with 2,3-Dihydroxynaphthalene

[H2N（CH2）3NH312[MoO2（C10H6O2）2] （1） was synthesized by the 2,3-dihydroxynaphthalene in the mixed solvent of CH3OH, CH3CN reaction of （n-Bu4N）4[Mo8O26] with and 1,3-propanediarnine. （C5HllN2）2- [HeN（CH2）3NH2][MoO2（CloH6O2）2] （2） was obtained by the reaction of Na2MoO4.2H20 with 2,3-dihydroxynaphthalene in the same solvent above. Both of the complexes possess complex anion [Mo（VI）O2（OC10H6O）2]^2- which shows pseudo-octahedrally coordinated fashion, while the counterions are two protonated 1,3-propanediamine in complex 1 and （CsH11N2）^＋ in complex 2. （C5H11N2）＋ is the byproduct of reaction 2, which results from combination of acetonitrile with 1,3-propanediamine. Packing diagrams of the two complexes are also different. There is anti-parallel-aligned-double-meso-bilayer unit in complex 1. However there are four chiral anions arranged in anticlockwise orientation in complex 2.     

Electrochemical Determination of Superoxide Based on Cytochrome c Immobilized on DDAB‐Modified Powder Microelectrode

Abstract

Cytochrome c was immobilized at didodecyldimethylammonium bromide (DDAB)‐modified powder microelectrode and presented quasi‐reversible electrochemistry. The apparent surface coverage of cytochrome c is greatly enhanced by using powder microelectrode technique, which is 1.21×10^?8 mol/cm², more than one to three orders of magnitude larger than that obtained with thiol and DNA‐modified Au electrode. The cytochrome c modified powder microelectrode was applied for the amperometric determination of superoxide generated by the reaction of hypoxanthine with xanthine oxidase (XOD) in the presence of dioxygen.

The detection sensitivity of the modified powder microelectrode is 0.74 µA/cm² µM, which is larger than that reported in previous publications. The detection limit of the modified powder microelectrode (PME) is 0.5 µM, and the linear detection range is 0.86～5.93 µM (values of the concentration are all in terms of hypoxanthine concentration in the solution).     

On the Effect of Hydrogen Peroxide on the Flow‐Injection Determination of Platinum Based on Luminol Chemiluminescent Reaction

Abstract

A flow‐injection chemiluminescent (CL) method for the determination of trace amounts of Pt(IV) based on the oxidation reaction of luminol in alkaline solution is proposed. The effect of Pt(IV) on the oxidation of luminol was studied in the absence and in the presence of hydrogen peroxide. The positive effect of hydrogen peroxide as well as chloride ions on the sensitivity of measurements was observed. The developed method is characterized by a low limit of detection of Pt (LOD=0.06 ng mL^?1) and good reproducibility (RSD=2.2%). The addition of hydrogen peroxide to the reaction medium resulted in decreasing of platinum detection limit to 0.03 ng mL^?1.     

Determination of Active Ingredients of Hawthorn by Capillary Electrophoresis with Electrochemical Detection

A method based on capillary electrophoresis with electrochemical detection has been developed for the separa-tion and determination of epicatechin,kaempferol,chlorogenic acid,4-hydroxybenzoic acid,quercetin and proto-catechuic acid in hawthorn for the first time.The effects of working electrode potential,pH and concentration ofrunning buffer,separation voltage and injection time on CE-ED were investigated.Under the optimum conditions,the analytes could be separated in a 60 mmol·L~(-1) borate buffer(pH 8.7)within 21 min.A 300 μm diameter carbondisk electrode has a good response at 0.95 V(vs.SCE)for all analytes.The response was linear over three ordersof magnitude with detection limits(S/N=3)ranging from 3×10~(-8) to 2×10~(-7) g·mL~(-1) for the analytes.The methodhas been successfully applied to the analysis of real sample,with satisfactory results.     

Electrochemical Detection of Host–Guest Interactions of Dicarboximide Pesticides with Cyclodextrins

Electrochemical methods sensitively detect the formation of host–guest complexes of cyclodextrins and three redox-active pesticides: vinclozoline (3-(3,5-dichlorophenyl)-5-methyl-5-vinyl-1,3-oxazolidine-2,4-dione), iprodione (3-(3,5-dichlorophenyl)-N-(1-methylethyl)-2,4-dioxo-1-imidazolidinecarboxamide), and procymidone (3-(3,5-dichloro-phenyl)-1,5-dimethyl-3-azabicyclo[3.1.0]hexane-2,4-dione). The protecting environment of the CD cavity allows a four-electron heterogeneous reaction leading to a preferential cleavage of the C–Cl bonds and conservation of the heterocycle structure for a further second electron transfer step. This interpretation is supported by numerical simulation of the voltammetric curves and by quantum-chemical calculations of the LUMO changes of vinclozoline. Electrochemical detection of these host–guest interactions is far superior to the spectral methods.     

Reaction of N‐Nonaflyl and N‐Cyano‐Benzotriazoles with Enamines

N‐Nonaflyl‐benzotriazole 1a reacts with enamines 2 in tetrahydrofurane (THF) at room temperature to afford o‐nonafluorobutansulfonamido‐phenylazo‐enamines 3 in 74–81% yield. Compound 1a reacts with 1‐diethylaminobutadien 2f twice, affording pyridazine derivative 3f in 20% yield. Ringopening of N‐cyano‐benzotriazole 1b with pyrrolidinocyclohexene 2a affords, under cleavage of pyrrolidine 1,2,3,4‐tetrahydro‐dibenzo[4,5:e]imidazo[1,2‐b][1,2,4]triazine 4 in 43% yield.     

Reaction of Imines with 5,5‐Dimethyl‐1, 3‐cyclohexandione

The reaction of imines 1 with 5,5‐dimethyl‐1,3‐cyclohexandione 2 in methanol was investigated. When the reaction was carried out without a catalytic amount of molecular iodine, ring‐opening derivatives of xanthenediones 3 were obtained in high yields. On the other hand, when molecular iodine and a catalytic amount of zinc powder were employed as the catalyst, xanthenediones derivatives 4 were obtained with excellent yields.     

Electrochemical Sensor for Detection of p-Nitrophenol Based on Nickel Oxide Nanoparticles/α-Cyclodextrin Functionalized Reduced Graphene Oxide

p-Nitrophenol (p−NP) is a high priority toxic pollutant and that has harmful effects on human, animals and plants. Thus, the detection and determination of p−NP present in the environment is an urgent as well as highly important requisite. The present article, therefore focused on the construction of a novel electrochemical sensor based on NiO nanoparticles/α-cyclodextrin functionalized reduced graphene oxide modified glassy carbon electrode (NiO−NPs-α-CD-rGO-GCE) for the selective and sensitive detection of p−NP. UV-vis, high resolution transmission electron microscopy (HR-TEM), selected area electron diffraction pattern (SAED) and X-ray diffraction (XRD) analysis confirms the formation of highly pure NiO nanoparticles. Field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), and cyclic voltammetry (CV) were used to characterize the step-wise electrode modification process. DPV was carried out to quantify p−NP within the concentration range of 1−10 μM and found the detection limit of 0.12 nM on the basis of the signal-to-noise ratio S/N=3. The electrode can able to detect different isomers of nitrophenols. Interferences of other pollutants such as phenol, p-aminophenol, o- and m- nitrophenol, 4-chlorophenol, 2,6-dichlorophenol and ions like K⁺, Cd²⁺, Cl⁻, SO₄²⁻ did not affect the sensing of p−NP. The newly developed sensor exhibited diffusion controlled kinetics and had excellent sensitivity, selectivity and reproducibility for the detection of p−NP. The electrode showed good recoveries in real sample analysis.     

Reaction of 2,3-dibromo-3-nitroacrylates with N-amino-N″-nitroguanidine

Russian Journal of Organic Chemistry -     

Ultrasensitive Assay of Gatifloxacin at Picogram Level Based on its Enhancing Effect on the Myoglobin‐Luminol Chemiluminescence Reaction

Abstract

Picogram‐level gatifloxacin was determined based on its significantly catalyzed effect on myoglobin‐luminol chemiluminescence (CL) reaction in the flow injection system. The enhanced chemiluminescence intensity was linear with gatifloxacin concentration in the range from 50 ngl^?1–10 µg l^?1 (r²=0.9995), and the detection limit was 20 ng l^?1 (3σ). At a flow rate of 2.0 ml min^?1 for each line, a complete analytical process could be performed within 0.5 min, including sampling and washing, with a relative standard deviation of less than 4.0% (n=7). The proposed method was applied successfully in the determination of gatifloxacin in tablets, human serum and urine samples with the recovery from 97.4–104.5%.     

Length Detection‐Flow Analytical System Using Autocatalytic Reaction

Abstract

A flow analytical system using the sodium sulfite/hydrogen peroxide autocatalytic reaction system was developed. A sulfite solution containing a pH indicator and bromo thymol blue (BTB), and a hydrogen peroxide solution were pumped by a mechanical system, and then mixed while flowing. The blue‐colored solution changed to yellow in the mixing coil. Furthermore, when horseradish peroxidase (HRP) was mixed with them, the length of the blue‐colored band decreased. The relationship between the blue band length and logarithm value of the HRP concentration was linear in the concentration range of 1 to 50 ppm.     

Synthesis of 5‐Cyano‐1,3‐dioxoalkanes by Reaction of 1,3‐Dicarbonyl Dianions with Bromoacetonitrile

5‐Cyano‐1,3‐dioxoalkanes were prepared by reaction of 1,3‐dicarbonyl dianions with bromoacetonitrile.     

A Convergent Synthesis of (±)-Eldanolide Based on Reaction of Aldehyde with Dithio-Substituted Crotyllithium Compound

Reaction of lithium anion of E-2-(1′-propen-1′-yl)-1,3-dithiane and 4-methyl-3-pentenal afforded a single product, which was converted in high yield to a wing gland pheromone, (±)-eldanolide.     

Electrochemical Sensor Based on Magnetic Fe3O4–Reduced Graphene Oxide Hybrid for Sensitive Detection of Binaphthol

Russian Journal of Electrochemistry - Naphthol is an environmental pollutant with highly toxic and corrosive. Naphthol can be absorbed by the body easily through the skin, and can cause serious...     

Polyaniline-ZnO−NiO Nanocomposite Based Non-enzymatic Electrochemical Sensor for Malathion Detection

An electrochemical sensor based on polyaniline-ZnO−NiO (PANI-ZnO−NiO) nanocomposite was developed for the non-enzymatic detection of malathion. The structure, surface morphology, and optical properties of the as-prepared nanocomposite were studied by XRD, FTIR, SEM, and UV-Vis spectroscopy. The electrochemical behavior of the nanocomposite based sensor was first evaluated through cyclic voltammetry (CV). Under optimum conditions, differential pulse voltammetry (DPV) was further utilized for malathion detection, which proved the PANI-ZnO−NiO/GCE electrode as an effective electrochemical sensor. The developed electrochemical sensor showed a low detection limit of 1.0×10⁻⁸ M with a wider linear range of 10 to 70 nM for malathion.     

Colorimetric Detection of Mercury（Ⅱ） Based on Silver Nanoparticles

通过一步法制备了稳定、分散的聚多巴胺包被的银纳米粒子（AgNPs）.基于Hg2＋与聚多巴胺的吸附作用使AgNPs发生聚集,导致体系吸收信号发生变化,同时溶液颜色也发生相应改变,建立了Hg2＋的紫外-可见分光光度法及色度法.线性范围为0.5～5.0μmol/L,检出限为50 nmol/L.表征了紫外-可见光谱、红外光谱及扫描电镜显微成像（SEM）,优化了实验条件,并探讨了反应机理.该方法用于实际样品中Hg2＋的测定,RSD≤4.4%.