Comparative Study of Electrospray and Atmospheric Pressure Chemical Ionization with Liquid Chromatography–Mass Spectrometry for Quantification of Five Antihyperglycemic Agents Utilizing Monolithic Column

Liquid chromatography-mass spectrometry (LC-MS) in atmospheric pressure chemical ionization (APCI) and electrospray ionization (ESI) modes were studied for a multi-component plasma and urine quantification of 5 antihyperglycemic agents (metformin, pioglitazone, gliclazide, glibenclamide, and glimperide). The separation of the compounds was achieved using Chromolith Performance RP-18e column (100 × 4.6 mm), with gradient mobile phase composition of acetonitrile ?0.1% formic acid. MS parameters for APCI and ESI were optimized individually and were operated in positive mode. The detection limits for the metformin, pioglitazone, glibenclamide, and glimepiride were determined to be 6.84, 6.22, 13.03, and 44.38 ng mL^?1 using LC-ESI-MS; and for LC-APCI-MS, it was determined to be 48.39, 8.02, 17.02, and 144.55 ng mL^?1, respectively. Gliclazide was the only exception as it exhibited a lower limit of detection (LOD) using APCI than ESI which was found to be 5.61 and 23.43 ng mL^?1, respectively. The method was validated for system suitability, linearity, precision and accuracy, specificity, stability, and robustness. The ESI as compared to APCI was found superior in many analytical parameters. The assay has been applied successfully to biological fluids (plasma and urine) of healthy volunteers.     

Experimental Design Optimization of Arsenic Speciation in Groundwater

The optimization of a Differential-Pulse Stripping Voltammetry (DPSV) procedure for arsenic speciation determination, using sodium diethyldithiocarbamate (DDTC-Na) as complexing agent, is described. An experimental design methodology was used to select the optimal experimental conditions. A robust regression method was used for the calibrations under these conditions that eliminate anomalous points. Electroinactive As(V) was reduced to As(III) with sodium thiosulfate prior to determination. The detection limit obtained was 1.95 × 10^?9 mol dm^?3. This procedure was successfully applied to the determination of arsenic speciation in groundwater.     

Optimization of the ESI and APCI experimental variables for the LC/MS determination of s-triazines, methylcarbamates, organophosphorous, benzimidazoles, carboxamide and phenylurea compounds in orange samples

In this work, ten selected pesticides of different chemical groups, indicated to orange culture, were extracted and determined by liquid chromatography-mass spectrometry using both electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) operating in the positive ion detection mode. Applying a variables selection technique verified that cone voltage, source temperature and drying-gas flow-rate are the critical variables when the ESI was used, while cone voltage was found to be the only critical variable for the MS system, operating with the APCI ionization mode. After optimization of the most important parameters through the variables selection technique, the selected ion-recording (SIR) mode, monitoring the [M + H](+) species for all the compounds, was applied for the method validation of the pesticides, in both ionization modes. In orange samples, matrix effects did not interfere with the determination of the pesticides. Pesticides quantification limits ranged from 10 to 50 microg kg(-1) for ESI and from 8.2 to 45 microg kg(-1) for APCI. Linearity was studied from LOQ upto 200 times LOQ values (r > 0.98). Recoveries obtained were in the range of 70.2-100.5% (RSDs less than 10%). In order to guarantee that the identification and confirmation of the studied pesticides in real samples were unequivocal, characteristic fragment ions of the pesticides were obtained by varying the cone voltage (in-source CID).     

A fast method for monitoring of organic explosives in soil: a gas temperature gradient approach in LC–APCI/MS/MS

A novel, fast liquid chromatography atmospheric pressure chemical ionization mass spectrometry (LC–APCI–MS/MS) screening method was developed to determine the trace amounts of TNT (trinitrotoluene), RDX (1,3,5-trinitroperhydro-1,3,5-triazine), HMX (cyclotetramethylene-tetranitramine), PETN (pentaerythritoltetranitrate), TETRYL (2,4,6-trinitrophenyl-N-methylnitramine), picric acid (2,4,6 trinitrophenol), 2,6-DNT (2,6-dinitrotoluene), and TMETN (trimethylolethane-trinitrate) which contaminate the soil after explosion. A gradient of 2.00 mM ammonium nitrate aqueous solution-methanol mobile system, C18 column, and atmospheric pressure chemical ionization (APCI) (?) ionization mode was used after a single-step solid–liquid extraction procedure from soil matrix. Phenytoin was used as the internal standard. As an extraordinary application, gas temperature gradient in an APCI ionization was used. Analytes were selectively eluted from the system within 10 min. Average recovery obtained from the soil was between 93.01 and 104.20% at 250.0, 500.0, and 1000.0 ngg^?1 concentration levels. Limit of detection (LOD) and limit of quantification (LOQ) values obtained from the analysis of the soil samples including explosive mix were between 8.9–161.2 and 13.2–241.5 ngg^?1, respectively.     

On-Line SPE Coupled with LC�CAPCI�CMS for the Determination of Trace Explosives in Water

In this study, a rapid, sensitive, and fully automated on-line solid phase extraction (SPE)?Cliquid chromatography (LC)?Cmass spectrometry (MS) method for the analysis of explosive residues in water, was systematically investigated. First, separation of explosive residues was achieved by reverse-phase chromatography using an XDB-C18 column in 30 min with an eluent containing 0.1% acetic acid, 5 mM ammonium acetate, and methanol. Secondly, atmospheric pressures chemical ionization (APCI) and electrospray ionization (ESI) interfaced with the MS detector were used to examine the explosive residues, indicating that APCI?CMS was more suitable than ESI?CMS for the detection of explosives. Thirdly, the conditions for on-line SPE, including solvent pH and sample injected volume, were optimized. The calibration curves obtained for all explosives studied were linear in the concentration range 0.5?C50 ??g L^?1. The detection limits of this method ranged from 0.05 to 0.5 ??g L^?1 when 4000 ??L of sample was on-line pre-concentrated on C18 enrichment column. The recoveries from lake waters spiked with explosive standard solution ranged from 90.5 to 108.0%. The proposed method is simple, fast, and could be applied successfully to the analysis of explosive residues in contaminated water without any further pretreatment.     

Optimization and Comparison of ESI and APCI LC-MS/MS Methods: A Case Study of Irgarol 1051, Diuron,and their Degradation Products in Environmental Samples

A systematic and detailed optimization strategy for the development of atmospheric pressure ionization (API) LC-MS/MS methods for the determination of Irgarol 1051, Diuron, and their degradation products (M1, DCPMU, DCPU, and DCA) in water, sediment, and mussel is described. Experimental design was applied for the optimization of the ion sources parameters. Comparison of ESI and APCI was performed in positive- and negative-ion mode, and the effect of the mobile phase on ionization was studied for both techniques. Special attention was drawn to the ionization of DCA, which presents particular difficulty in API techniques. Satisfactory ionization of this small molecule is achieved only with ESI positive-ion mode using acetonitrile in the mobile phase; the instrumental detection limit is 0.11 ng/mL. Signal suppression was qualitatively estimated by using purified and non-purified samples. The sample preparation for sediments and mussels is direct and simple, comprising only solvent extraction. Mean recoveries ranged from 71% to 110%, and the corresponding (%) RSDs ranged between 4.1 and 14%. The method limits of detection ranged between 0.6 and 3.5 ng/g for sediment and mussel and from 1.3 to 1.8 ng/L for sea water. The method was applied to sea water, marine sediment, and mussels, which were obtained from marinas in Attiki, Greece. Ion ratio confirmation was used for the identification of the compounds.     

Stir Bar Sorptive Extraction and LC–MS/MS for Trace Analysis of UV Filters in Different Water Matrices

A simple, selective and highly sensitive method was developed and optimized to determine the most commonly used UV filters with endocrine-disrupting potential in water, namely benzophenone-3 (BP-3), octocrylene (OC), ethylhexyl dimethyl p-aminobenzoate (OD-PABA), ethylhexyl methoxycinnamate, ethylhexyl salicylate (EHS) and homosalate (HMS). Samples were extracted by stir bar sorptive extraction followed by liquid desorption (SBSE-LD). The important factors influencing SBSE-LD were optimized. Under optimal conditions, assays were performed on 50 mL of water sample using stir bars (0.5 mm in film thickness, 10 mm in length) at room temperature. The analytes were determined by liquid chromatography–tandem mass spectrometry with triple quadrupole analyzer using atmospheric pressure chemical ionization. The main parameters in HPLC–APCI–MS/MS were also optimized to provide the best performances for all analytes. Moreover, matrix effect was investigated using two methods the post-column infusion system and the method of spiked matrices after extraction. As a result, no significant matrix effect on the analysis was observed. The method showed good linearity (R ² coefficients greater than 0.996 in different water samples after SBSE-LD). Recoveries of the analytes were close to 90%, except for BP-3 (64%) and OC (76%) with relative standard deviation lower than 11%. Detection limits were between 0.6 and 3.3 ng L⁻¹ for all the analytes except for HMS (94 ng L⁻¹) and EHS (114 ng L⁻¹). This methodology was applied to measure UV filters in seawater, river water and wastewater in different sites of Liguria; BP-3 and OC were found in most of the considered samples at rather low concentration level.

     

Speciation and determination of chromium ions by dispersive micro solid phase extraction using magnetic graphene oxide followed by flame atomic absorption spectrometry

A selective, simple and fast dispersive micro solid phase extraction method using magnetic graphene oxide (GO) as an efficient sorbent has been developed for the extraction, separation and speciation analysis of chromium ions. The method is based on different adsorption behaviour of Cr(VI) and Cr(III) species onto magnetic GO in aqueous solutions which allowed the selective separation and extraction of Cr(VI) in the pH range of 2.0–3.0. The retained Cr(VI) ions by the sorbent were eluted using 0.5 mL of 0.5 mol L^?1 nitric acid solution in methanol and determined by ?ame atomic absorption spectrometry. Total chromium content was determined after the oxidation of Cr(III) to Cr(VI) by potassium permanganate. All effective parameters on the performance of the extraction process were thoroughly investigated and optimised. Under the optimised conditions, the method exhibited a linear dynamic range of 0.5–50.0 µg L^?1 with a detection limit of 0.1 µg L^?1 and pre-concentration factor of 200. The relative standard deviations of 3.8% and 4.6% (n = 8) were obtained at 25.0 µg L^?1 level of Cr(VI) for intra- and inter-day analysis, respectively. The method was successfully applied to the speciation and determination of Cr(VI) and Cr(III) in environmental water samples.     

Ultra trace level square wave anodic stripping voltammetric sensing of mercury(II) ions in environmental samples using a Schiff base-modified carbon paste electrode

ABSTRACT

In this approach, a new carbon paste electrode modified with N,N′-bis(5-bromo-2-hydroxybenzylidene)-2,2-dimethylpropane-1,3-diamine Schiff base ligand (L) was synthesised for selective and effective determination of Hg²⁺ ions in aqueous environmental samples using cyclic and square wave anodic stripping voltammetric methods. First, the selective detection of mercury ion was confirmed by evaluating the stability constants of metal complexes formed between the Schiff base ligand (L) and some desired cations by conductometric measurements. Afterwards, by preparing an effective carbon paste electrode modified with L, the experimental and instrumental parameters affecting the performance of modified electrode were investigated. Square wave anodic stripping voltammograms were obtained after applying an accumulation potential ?0.5 V and accumulation time 150 s in Britton–Robinson buffer solution at pH 2.0. The optimal square wave parameters found are pulse amplitude 75 mV, frequency 50 Hz and step potential 6 mV. The procedure exhibited linear range from 0.4 to 120 μg L^?1 Hg²⁺ with a limit of detection of 0.042 μg L^?1. The proposed electrode was proved to be highly selective in the presence of various cations and anions and was successfully used for determination of mercury in tobacco and several water samples.     

Physical Stability and the Droplet Distribution of Rice Oil–in–Water Emulsion

The objective of the current study was to evaluate long-term stability of emulsions with rice oil by assessing their physical properties. For this purpose, six emulsions were prepared, their stability was examined empirically, and the most correctly formulated emulsion composition was determined using a computer simulation. Variable parameters (oil and thickener content) were indicated with optimization software based on Kleeman's method. Synthesized emulsions were studied by numerous techniques involving determination of particle size and distribution of emulsion, optical microscopy, viscosity, and novelty analysis—Turbiscan test.

The emulsion containing 50 g of oil and 1.2 g of thickener had the highest stability. Empirically determined parameters proved to be consistent with the results obtained using the computer software. The computer simulation showed that the most stable emulsion should contain from 35.93 to 50 g of oil and 0.94 to 1.19 g of thickener. The computer software based on Kleeman's method proved to be useful for fast optimization of the composition and providing parameters of stable emulsion systems. Forming emulsions based on rice oil is a chance to introduce a new, interesting representative of functional food as well as a cosmetic product.     

Surface-activated chemical ionization ion trap mass spectrometry in the analysis of drugs in dilute urine samples. Part II: analysis of morphine and other street drugs

The new ionization method, called surface-activated chemical ionization (SACI), was employed for the analysis of fives drugs (morphine, codeine, 6-monoacetylmorphine (6-MAM), benzoylecgonine and cocaine) by ion trap mass spectrometry. The results so obtained have been compared with those achieved by using atmospheric pressure chemical ionization (APCI), no-discharge-APCI and electrospray ionization (ESI) clearly showing that SACI is the most sensible one mainly due to the high ionization efficiency and the lower chemical noise. The performance of SACI in terms of sensitivity and linearity was compared with the sensitivity and linearity obtained using APCI, no-discharge-APCI and ESI, showing that the new SACI approach gives rise to the best results. Then, SACI was used to analyze morphine, codeine, 6-MAM, benzoylecgonine and cocaine in urine samples. After the optimization of the instrumental parameters for a mixture of the standard compounds, eight urine samples were analyzed. They were strongly diluted (1 : 20 and 1 : 100) in order to prevent the chromatographic column damage due to the matrix composition. Furthermore, the diluted urine samples were directly analyzed, without pretreatment, through LC-MS and LC-MS/MS, and the obtained results are reported.     

Preconcentration and determination of ultra trace amounts of palladium in water samples by dispersive liquid-liquid microextraction and graphite furnace atomic absorption spectrometry

A highly sensitive, simple and rapid method is presented for the determination of palladium using graphite furnace atomic absorption spectrometry after its separation and preconcentration by dispersive liquid-liquid microextraction. Ultra traces of Pd were extracted and preconcentrated in acidic water samples by using 2-amino-1-cyclohexene-1-dithiocarboxylic acid as a suitable chelating agent, and carbon tetrachloride and acetone as extraction and disperser solvents, respectively. The experimental parameters were optimized in order to enhance the extraction efficiency. After optimizing the extraction conditions and various instrumental parameters, an enhancement factor of 350 was obtained. The analytical curve absorbance vs. concentration was linear over the range 0.02–0.6 µg L^-1 Pd. The detection limit and relative standard deviation were 0.007 µg L^-1 and 4.2%, respectively. The method was successfully applied to the determination of palladium in roadside soil and several aqueous samples.     

Development of a method for speciation of inorganic arsenic in waters using solid phase extraction and electrothermal atomic absorption spectrometry

A solid phase extraction (SPE) procedure based on Amberlite IRA 900 resin was developed for speciation and separation of inorganic arsenic species (III, V) and total As in water samples. The As species and total As in eluent solutions were determined by electrothermal atomic absorption spectrometry (ETAAS) using Ni chemical modifier with 1200°C pyrolysis temperature. Experimental parameters such as pH value, sample volume, flow rate, volume and concentration of eluent solution for As(V) were optimised and 98.0 ± 1.9% recovery was found at pH 4.0. Experimental adsorption capacity of the resin for As(V) was investigated and 229.9 mg g^–1 was found. Under optimised experimental conditions, instrumental parameters such as limit of detection (LOD) and limit of quantification (LOQ) found were 0.126 and 0.420 µg L^–1, respectively. Interference effects of coexisting ions in the sample matrix on the recovery of As(V) were investigated. Concentration of As(III) was obtained by subtracting As(V) concentration found at pH 4.0 from total As(III + V) found at pH 8.0. The accuracy of the method proposed by using the resin was tested for analysing As species in a waste water standard reference material (SRM, CWW-TM-D) and spiked real water samples with recovery above 95%. The method proposed was also applied to the determinations of As species and total As in underground hot waters and tap water with relative error below 3%.     

Highly sensitive determination of 68 psychoactive pharmaceuticals,illicit drugs,and related human metabolites in wastewater by liquid chromatography–tandem mass spectrometry

The present work describes the development and validation of a highly sensitive analytical method for the simultaneous determination of 68 compounds, including illicit drugs (opiates, opioids, cocaine compounds, amphetamines, and hallucinogens), psychiatric drugs (benzodiazepines, barbiturates, anesthetics, antiepileptics, antipsychotics, antidepressants, and sympathomimetics), and selected human metabolites in influent and effluent wastewater (IWW and EWW) by liquid chromatography coupled to tandem mass spectrometry (LC–MS/MS). The method involves a pre-concentration and cleanup step, carried out by solid-phase extraction (SPE) using the adsorbent Strata-XC, followed by the instrumental analysis performed by LC–MS/MS, using a Kinetex pentafluorophenyl (PFP) reversed-phase fused-core column and electrospray ionization (ESI) in both positive and negative modes. A systematic optimization of mobile phases was performed to cope with the wide range of physicochemical properties of the analytes. The PFP column was also compared with two reversed-phase columns: fused-core C18 and XB-C18 (with a cross-butyl C18 ligand). SPE optimization and critical aspects associated with the trace level determination of the target compounds (e.g., matrix effects) have been also considered and discussed. Fragmentation patterns for all the classes were proposed. The validated method provides absolute recoveries between 75 and 120 % for most compounds in IWW and EWW. Low method limits of detection were achieved (between 0.04 and 10.0 ng/L for 87 % of the compounds), allowing a reliable and accurate quantification of the analytes at trace level. The method was successfully applied to the analysis of these compounds in five wastewater treatment plants in Santorini, a touristic island of the Aegean Sea, Greece. Thirty-two out of 68 compounds were detected in all IWW samples in the range between 0.6 ng/L (for nordiazepam) and 6,822 ng/L (for carbamazepine) and 22 out of 68 in all EWW samples, with values between 0.4 ng/L (for 9-OH risperidone) and 2,200 ng/L (for carbamazepine). The novel methodology described herein maximizes the information on the environmental analysis of these substances and also provides a first profile of 68 drugs in a Greek touristic area.     

Preparation of a portable point-of-care in vitro diagnostic system, for quantification of canine C-reactive protein, based on a magnetic two-site immunoassay

In this study, characterization of the binding kinetics and optimization of a magnetic permeability based point-of-care (POC) immunoassay system for quantification of canine C-reactive protein (cCRP) is described. The reagent is based on a two-site heterogeneous immunoassay system utilizing conjugated superparamagnetic nanoparticles (SPION) and silica particles, both particles carrying covalently linked antibodies directed to the cCRP analyte. Detection is carried out using a magnetic permeability-based small instrument, adjusted in order to apply it in a POC setting near the patients. The kinetic parameters are characterized and applied in the final design of the assay system. In the cCRP system studied, 90 % of the binding between immobilized solid-phase silica antibody and cCRP is complete after only 15 s, and 30 s for the binding between the antibody on the SPION and the bound cCRP on the silica particle. Additionally, the binding rate constants are determined to be 149 and 30 M^?1s^?1, respectively. The analytical sensitivity, clinical sensitivity, and imprecision verifies the clinical usefulness of the system. Also, quantification of cCRP, using the system described, in dog clinical samples from mixed breeds shows a high correlation to a commercially available comparative cCRP ELISA system (y?=?0.98?×?+3.2, R ²?=?0.98, n?=?47). The immunoassay system described can thus provide the veterinarian a valuable tool for rapid diagnosis and monitoring of inflammatory diseases in dogs in a setting near the patients.     

Speciation of the uranyl nitrate system via spectrophotometric titrations

The speciation of the uranyl nitrate system has been studied previously with limited success producing a wide range of stability constant values. The current literature has values for the mononitrate species, with scattered data for higher nitrate species. Furthermore, the reported values vary with experimental method. The work presented here examines the stability of the uranyl/nitrate/perchlorate/water system via spectrophotometric titrations with a focus on the predominance of the uranyl dinitrate species at low nitrate concentrations. Stability constants were determined at ionic strengths ranging from 1 to 6 molal followed by refinement with the specific ion interaction theory. The zero ionic strength stability constant of the uranyl dinitrate species was refined as log β (2,1)º = 3.37 ± 0.02 when including the stability constant for the uranyl mononitrate from Ahrland and 2.66 ± 0.02 without. These values are considerably higher than previous studies, which is attributed to the alternate speciation model used. The values generated in this work produce speciation diagrams that are consistent with published solvent extraction data of the uranyl nitrate system.     

HPLC-AAS hybrid technique for studying the speciation of trace metals (Al,Fe, Si,Hg) in biological fluids: A review of applications,recent experiences and perspectives

A method developed using the combination of HPLC and AAS enabling both qualitative and quantitative study of the protein binding and speciation of trace metals in biological fluids at clinical relevant levels is reviewed. The whole system was made metal-free by using polymer-based columns, column holders and tubing and by the insertion of a silica-based scavenger column placed immediately before the injection valve to selectively retain any trace of aluminum and iron originating from buffer solutions and recipients. ETAAS instrumental conditions were carefully selected to eliminate interferences secondary to the salt gradient elution. Particular attention was paid to the choice of HPLC columns. Protein recoveries varied between 95 and 105% and trace metal recoveries were close to 100%. Intra-assay and inter-assay CVs of the HPLC/AAS hybrid technique were below 10%. Because of its high sensitivity, the method can be used at clinically relevant concentrations and was applied successfully to study (i) the interaction between iron and aluminum for binding to transferrin, (ii) the influence of citrate on the transferrin binding of aluminum, (iii) the speciation of silicon in the serum of dialysis patients and (iv) the toxicity of mercury compounds in cell cultures.     

Ultra-trace determination of arsenic species in environmental waters,food and biological samples using a modified aluminum oxide nanoparticle sorbent and AAS detection after multivariate optimization

We describe a simple and efficient method for solid phase extraction and speciation of trace quantities of arsenic. It is based on the use of functionalized aluminum oxide nanoparticles and does not require any oxidation or reduction steps. The experimental parameters affecting extraction and quantitation were optimized using fractional factorial design methods. Adsorbed arsenic was eluted from the sorbent with 1 M hydrochloric acid and determined by graphite furnace atomic absorption spectrometry. Preconcentration factors up to 750 were achieved depending on the sample volume. Studies on potential interferences by various anions and cations showed the method to be highly selective. Under optimum conditions, the calibration plots are linear in the 5.0 to 280 ng L⁻¹ and 8.0 to 260 ng L⁻¹ concentration ranges for As(III) and total arsenic, respectively. The detection limits (calculated for S/N ratios of 3) are 1.81 and 1.97 ng L⁻¹ for As(III) and total arsenic, respectively. The method was successfully applied to the determination and speciation of arsenic in (spiked) environmental, food and biological samples and gave good recoveries. The method was validated using a certified geological reference material.

Novel functionalized Al₂O₃ nanoparticles were synthesized and used for speciation and determination of arsenic in different samples. The experimental variables were optimized using fractional factorial design that can save time and operational costs.

     

Enantioselective determination of modafinil in pharmaceutical formulations by capillary electrophoresis, and computational calculation of their inclusion complexes

A fast capillary electrophoretic method is described for the separation and determination of the enantiomers of the novel wake-promoting agent, modafinil. Several parameters affecting the separation were studied, including the type and concentration of chiral selector, buffer pH, buffer concentration, voltage and temperature. Good chiral separation of the racemic mixture was achieved in less than 5 min with resolution factor Rs?=?2.51, using a bare fused-silica capillary and a background electrolyte (BGE) of 25 mM H₃PO₄?1 M tris solution; pH 8.0; containing 30 mg mL^?1 of sulfated-β-cyclodextrin (S-β-CD). The separation was carried out in normal polarity mode at 25 ^?C, 18 kV and using hydrostatic injection. Acceptable validation criteria for selectivity, linearity, precision, and accuracy were included. The developed method was successfully applied to the assay of enantiomers of modafinil in pharmaceutical formulations. The computational calculations for the enantiomeric inclusion complexes rationalized the reasons for the different migration times between the modafinil enantiomers.     

Domoic acid at trace levels in lagoon waters: assessment of a method using internal standard quantification

Domoic acid (DA) is a neurotoxin produced by different algae, including pennate diatoms, principally from the genus Pseudo-nitzschia, and it is the main cause of amnesic shellfish poisoning. Determination of this toxin in seawater samples is fundamental to define the real contamination risks for aquatic species. We have developed two very sensitive instrumental methods using hydrophilic interaction liquid chromatography coupled using tandem mass spectrometry in positive and negative polarity modes. Instrumental detection limits were 9 pg mL^?1 for positive and 19 pg mL^?1 for negative ionisation. A procedural method based on solid-phase extraction for the determination of dissolved DA present in seawater has been developed, and an extraction procedure was employed for the determination of the toxin in the particulate fraction. DA quantification was performed using the internal standard method to account for signals fluctuations and random errors during sample treatment. To our knowledge, this is the first study to use this quantification method for DA determination. Trueness, extraction yield, matrix effects, repeatability and procedural detection limits were evaluated during method validation. Procedural detection limits of 0.3 pg mL^?1 (positive mode) and 0.6 pg mL^?1 (negative mode) were found for the dissolved fraction, and absolute limits of 0.4 pg (positive mode) and 6.0 pg (negative mode) for particulate samples were obtained. The most sensitive method in positive mode was applied to define DA occurrence in the Venice Lagoon. Trace concentrations of domoic acid ranging from 1.5 to 16.2 pg mL^?1 were found for the first time in the Venetian environment.