Trace Determination of Manganese in Urine by Graphite Furnace Atomic Absorption Spectrometry and Inductively Coupled Plasma–Mass Spectrometry

This paper describes a simple and sensitive method for the determination of manganese in human urine by graphite furnace atomic absorption spectroscopy (GFAAS), which includes sample preparation by microwave digestion. Matrix modifier combinations, the digestion power, pyrolysis, and atomization temperatures were optimized. A mixture of 5.0 µg Pd(NO₃)₂ and 3.2 µg Mg(NO₃)₂ modifier presented the best performance. The optimal temperatures for pyrolysis and atomization were 1500°C and 1950°C, respectively. The GFAAS method was compared to inductively coupled plasma–mass spectrometry (ICP–MS) for the determination of manganese in urine. Analytical figures of merit for GFAAS and ICP–MS were: accuracy (3.46%, 2.19%), precision (3.61%, 5.84%), LOD (0.109 µg · L^?1, 0.015 µg · L^?1), LOQ (0.327 µg · L^?1, 0.045 µg · L^?1), and recovery (80–100%, 74–89%). Both methods were employed for the determination of Mn in urine and the results were compared statistically.     

High-Sensitivity and High-Performance Determination of Trace Aluminum in Water for Pharmaceutical Purposes by Microwave Plasma and Inductively Coupled Plasma–Atomic Emission Spectrometry

Procedures for the determination of aluminum in water for injections (Aqua ad iniectabilia) and high-purity water (Aqua valde purificata) at a level of several µg?L^?1 using atomic-emission spectrometry with a novel microwave plasma (MP–AES) and inductively coupled plasma (ICP–AES) are proposed. Regardless of the atomic-emission technique used, the procedure for aluminum needs no sample preparation (acidification only), no preconcentration, shows high sensitivity (limits of detection of 0.4 and 0.7?µg?L^?1 for ICP–AES and MP–AES with a polymeric inert concentric nebulizer, respectively, and 0.03?µg?L^?1 for ICP–AES with an ultrasonic nebulizer), high precision (repeatability, relative standard deviation, <5%), and high throughput (25 samples per hour), and is considerably simpler and more expedient from the viewpoint of the analysis cost and time compared with the standard spectrofluorimetric procedure of the US and the European Pharmacopoeia.     

Determination of Cadmium,Copper, Lead,and Zinc in Pilchard Sardines from the Bay of Boumerdés by Atomic Absorption Spectrometry

Fish are an important human food with increasing consumption in recent decades. Diet is the main route of exposure to heavy metals for human health. For this reason, many studies have been performed on the pollution by heavy metals in different species of fish. Our main objective was to evaluate the pollution by trace metals (Zn, Cu, Pb, and Cd) in sardine muscles collected from the bay of Boumerdés (Algeria). Flame atomic absorption spectroscopy (AAS) was used for the quantification of Cu and Zn. The quantification of Cd and Pb was achieved by graphite furnace (GF) AAS. The analysis revealed the presence of metal trace elements in the muscles of species at concentrations below the thresholds established by national and international regulations.     

A Study on the Determination of Copper by Microwave Induced Plasma Atomic Emission Spectrometry (MIP-AES)

The determination of copper by MIP-AES was investigated in detail. Aqueous samples were introduced from an ultrasonic nebulizer and the solvent was removed by a desolvation device before introduction of the aerosol into the MIP. The desolvation system consisted of a condenser associated with a concentrated H2SO4 absorption cell. Various experimental conditions and interferences from easily ionised elements (EIEs) were also studied and some practical samples were analyzed.     

Determination of Phosphorus in Crude Oil and Middle Distillate Petroleum Products by Inductively Coupled Plasma–Optical Emission Spectrometry

A method for the precise and accurate determination of phosphorus in crude oil and middle distillate petroleum products was developed using inductively coupled plasma–optical emission spectrometry to rapidly determine phosphorus as a control method. The presence of phosphorus is undesirable in petrochemical products as it complexes with other metals generating residues that interrupt normal operation of refineries. The presence of phosphorus may be due to some anti-fouling additives or the crude oils processed. Consequently, it is necessary to control the phosphorus present at trace levels in the crude oil and in process streams that present various densities and viscosities. The instrumental power, nebulizer flow, pump rate, read time, and the sample preparation conditions were optimized. The desired level of quantification for the petrochemical industry was achieved allowing the simultaneous analysis of diverse liquid petroleum products.     

Preconcentration of Rare Earth Elements with 8-Hydroxyquinoline-5-sulfonic Acid Chelated Cellulose Filter Prior to Determination by Inductively Coupled Plasma Atomic Emission Spectrometry

ICP- AEShasbecome a widely used technique formulti- elemental major,minorand traceanalyses.However,many elements such as REEsare often presentin real samples atconcen-trations too low to be accurately determined by conventional ICP,especially in biological andenvironmental samples.Moreover the spectral interferences from matrix elementsoften inter-fere with trace REEsdetermination.To determine trace and ultra- trace REEsin complex ma-trices,the separation of the matrix components and th…     

Inductively Coupled Plasma （ICP） Mass Spectrometry （MS） Hyphenated with Atomic Emission Spectrometry（AES） for Simultaneous Determination of Major, Minor and Micro Amounts of Elements in Geochemical Samples

Introduction Geological resource survey demands for determining various constituents including major, minor, micro, trace and ultra-trace levels of elements for preparing the map of resource distribution of our country. As a powerful and popularly used technique for multi-element analysis, inductively coupled plasma（ICP） atomic emission spectrometry （AES） has been applied to this field for a period of time. However, ICP spectrometric determination of those micro, trace and ultratrace elements needs enrichment procedures for improving the detection limit, which is unacceptable in case a great mass of samples should be analyzed as that in the task of geological resource survey. On the other hand, although ICP mass spectrometry （MS） is considered the most powerful method for trace elements determination, it is difficult for ICP-MS to be used to determine the trace and major analytes simultaneously in a spectrum.     

Possibilities of the Determination of Matrix Elements of High-Purity Glasses of As–Se and As–S Systems by Inductively Coupled Plasma Atomic Emission Spectrometry

Possibilities of inductively coupled plasma atomic emission spectrometry (ICP AES) as an alternative to X-ray spectrochemical analysis are estimated in the determination of matrix elements of glasses of As–Se and As–S systems. Standard solutions were prepared from pure elements As, Se and S. It was shown that the matrix elements of glasses can be determined with an expanded uncertainty of 0.05–0.1 mol %. The results of determinations by ICP AES and X-ray fluorescence spectrometry were compared; and it was found that by the attained performance characteristics, the results of ICP AES are highly competitive with the data of X-ray fluorescence spectrometry, but do not require sets of adequate solid reference samples.     

Determination of Rare Earth Elements in Garnet Minerals,Geological Materials by Inductively Coupled Plasma–Atomic Emission Spectral and Mass Spectral Analysis

Abstract

The performance of inductively coupled plasma–atomic emission spectrometry (ICP‐AES) for the determination of 14 lanthanides and Yttrium was evaluated by comparison with inductively coupled plasma–mass spectral (ICP‐MS) analysis. The geochemical reference samples (GRS), DNC‐1(diabase), AGV‐1(andesite), Sy‐2(syenite), MRG‐1(gabbro), AN‐G(anorthosite), AC‐E(granite), and MAG‐1(marine mud) were chosen as test materials and analyzed for checking the precision and reproducibility of the methods. The mineral garnet is separated from the black sands of the southwest coast of India, and the combined cation exchange–ICP method of AES analysis and MS analysis were carried out for the determination of rare earth elements. Both techniques are within the requirements needed for garnet minerals. The determination of rare‐earth elements in these minerals, which contain other elements as major contribution and trace distribution of rare‐earth elements, shows that ICP applied under the proper working condition lives up to the expectations. Major element analysis gives the formula of garnet of Manavalakurichi (MK) as (FeCaMg)_2.79Al_2.07Si_3.05O₁₂ approximated to Fe₃Al₂Si₃O₁₂, hence of almandine-type garnet. The enrichment of heavy lanthanides compared to the light lanthanides indicates that these lanthanides occupy the coordinaton site of Fe²⁺ by replacement. Both techniques are excellent in determining the very low concentration of lanthanides in geological materials, specifically garnet.     

Determination of Rhenium in Seawater from the Jiulong River Estuary and Taiwan Strait,China by Automated Flow Injection Inductively Coupled Plasma–Mass Spectrometry

A novel and automated flow injection (FI) system using a commercially available anion-exchange resin was developed for the online determination of rhenium in seawater by inductively coupled plasma–mass spectrometry (ICP–MS). The flow rate, reagent concentration, and sample volume were optimized. The rhenium concentration was determined using the integrated peak area through interpolation of standard addition calibration curves. The relative standard deviation was less than 2.45% (n?=?5), the recoveries were from 94.59 to 104.11%, and the linear dynamic range of the method was up to 998?ng?kg^?1. There was a good agreement between the rhenium concentrations in a standard measured in this work with results from previous studies. The limit of detection was 0.11?ng?kg^?1 for a sample volume of 7.5?mL and one cycle required 8.33?min. The developed FI–ICP–MS method was used to determine rhenium in seawater from the Jiulong River Estuary and Taiwan Strait.     

Determination of Platinum,Palladium, Ruthenium,Rhodium, and Iridium in Ultrabasic Rock from the Great Dyke of Zimbabwe by Inductively Coupled Plasma–Optical Emission Spectrometry

Platinum, palladium, ruthenium, rhodium, and iridum were determined in ultrabasic rock from the Great Dyke of Zimbabwe by inductively coupled plasma optical emission spectrometry. The limits of detection for these elements were less than 7 ng/g. The samples were fused at 1100°C to separate the noble metals which were enriched into a nickel sulfide button and dissolved in hydrochloric acid. The insoluble noble metals were filtered, dissolved in aqua regia in a boiling water bath, and determined by inductively coupled plasma optical emission spectrometry. This method was employed for the characterization of large quantities of ultrabasic rock from the Great Dyke of Zimbabwe.