辣根过氧化物酶修饰电极在离子液体[EMIM]BF4中的直接电化学

将壳聚糖(Chi)-辣根过氧化物酶(HRP)-多壁碳纳米管(MWCNTs)的复合物修饰在玻碳电极(GCE)表面, 制备了HRP修饰电极(Chi-HRP-MWCNTs/GCE), 并将其用于在亲水性离子液体1-乙基-3-甲基咪唑四氟硼酸([EMIM]BF4)中HRP的直接电化学研究. 紫外可见光谱和红外光谱表明, HRP在复合物内保持了其原始构象. 电化学研究表明, 该修饰电极在[EMIM]BF4中的循环伏安图上出现了一对峰形良好、几乎对称的氧化还原峰, 式量电位为－0.247 V (vs. Ag/AgCl), 说明包埋在Chi-MWCNTs中的HRP与电极之间发生了直接电子传递; HRP在电极表面直接电子转移的速率常数ks为3.12 s－1; 在65 ℃的[EMIM]BF4中HRP仍然保持其活性; HRP修饰电极对过氧化氢的还原具有电催化作用, 其表观米氏常数Km为5.6×10－5 mol•L－1, 催化电流与过氧化氢浓度在5.0×10－7～5.0×10－5 mol•L－1范围内呈线性关系, 检出限为2.0×10－7 mol•L－1. 该研究为非水相生物传感器的构制提供了一种新途径.     

血红蛋白在二氧化铈修饰电极上的直接电化学

将二氧化铈(CeO₂)与酶复合修饰电极, 采用循环伏安法研究了血红蛋白(Hb)在CeO₂修饰的玻碳电极上的电化学行为. 实验表明, 固定在CeO₂材料上的Hb, 不仅能有效地与电极表面进行直接电子转移, 而且能够保持其生物催化活性. 制得的Nafion/CeO₂/Hb/GC修饰电极的电子传递速率k_s为(0.68±0.09) s^－1, 对H₂O₂的检测限为1.013 μmol•L^－1, 重现性和稳定性较好. CeO₂在实验中体现出一定的生物相容性, 起到了促进Hb与电极之间进行直接电子传递的作用. CeO₂修饰电极进行蛋白质直接电化学测定以及酶生物电催化的成功实践, 为稀土氧化物材料在电化学传感领域中的应用开辟了思路.     

Direct Electrochemistry of Catalase at a Gold Electrode Modified with Single‐Wall Carbon Nanotubes

The direct electrochemistry of catalase (Ct) was accomplished at a gold electrode modified with single‐wall carbon nanotubes (SWNTs). A pair of well‐defined redox peaks was obtained for Ct with the reduction peak potential at ?0.414 V and a peak potential separation of 32 mV at pH 5.9. Both reflectance FT‐IR spectra and the dependence of the reduction peak current on the scan rate revealed that Ct adsorbed onto the SWNT surfaces. The redox wave corresponds to the Fe(III)/Fe(II) redox center of the heme group of the Ct adsorbate. Compared to other types of carbonaceous electrode materials (e.g., graphite and carbon soot), the electron transfer rate of Ct redox reaction was greatly enhanced at the SWNT‐modified electrode. The peak current was found to increase linearly with the Ct concentration in the range of 8×10^?6–8×10^?5 M used for the electrode preparation and the peak potential was shown to be pH dependent. The catalytic activity of Ct adsorbates at the SWNTs appears to be retained, as the addition of H₂O₂ produced a characteristic catalytic redox wave. This work demonstrates that direct electrochemistry of redox‐active biomacromolecules such as metalloenzymes can be improved through the use of carbon nanotubes.     

Direct Electrochemistry of Horseradish Peroxidase Embedded in Nano-Fe_3O_4 Matrix on Paraffin Impregnated Graphite Electrode and Its Electrochemical Catalysis for H_2O_2

Fe_3O_4particles coated with acrylic copolymer (ACP) of about5—8 nm in diameter were synthesized and used for immobiliza-tion of horseradish peroxidase (HRP). Direct electrochemistryof HRP embedded in the nanosized Fe_3O_4 solid matrix modifiedparaffin impregnated graphite electrode (PIGE) was achieved,which is related to the heme Fe(Ⅲ)/Fe(Ⅱ) conversion ofHRP. Cyclic voltammetry gave a pair of reproducible and well-defined redox peaks at about E_m of-0.295 V vs. SCE. Thestandard rate constant k_s was determined as 2.7 s~(-1). It demon-     

Direct Electrochemistry and Electrocatalytic Properties of Hemoglobin Immobilized on Carbon Nanotubes Ionic Liquid Electrode

Hemoglobin (Hb) was directly immobilized on a multiwalled carbon nanotubes ionic liquid electrode by immersing this electrode in a solution consisting of Hb and 1‐octyl‐pyridinium chloride as an ionic liquid. The immobilized Hb displayed a pair of well‐defined cyclic voltammetric peaks with a formal potential of ?0.187 V in acetate buffer solution, pH 5.0. This modified electrode exhibits fast response, a long linearity range, a low detection limit, high stability and excellent sensitivity through hydrogen peroxide detection with a detection limit (3σ) of 3.18 µM. The electrode was also used for electrocatalysis and voltammetric determination of oxygen and trichloroacetic acid.     

Direct Electrochemistry of Hemoglobin in Layer-by-layer {PDDA/Hb}_n Films Assembled on Pyrolytic Graphite Electrodes

The principle of alternate adsorption can be used to design and control specific molecular architectures1. Protein-polyion layer-by-layer assembly opens a possibility of organizing proteins with specific molecular architectural plan1 and studying redox proteins with electrochemical methods2. Recently, we reported electrochemistry of layer-by-layer {PSS/Mb}n films grown on PG electrodes1. In this work, layer-by-layer {PDDA/Hb}n films were fabricated on PG electrodes. Electrochemistry and …     

纳米六氰合铁酸铜化学修饰丝网印刷电极对H2O2 电催化性能的研究

采用TiO2溶胶-凝胶法在丝网印刷电极上制备了纳米六氰合铁酸铜修饰电极。研究了修饰电极的电化学性质。该电极对H2O2的电氧化过程有明显的催化作用。电流密度较常规六氰合铁酸铜化学修饰电极提高约3倍。通过测量该氧化电流可以对1.0×10-6~6×10-5mol/L H2O2进行测定。     

甲苯胺蓝修饰石墨电极的电化学性质及对血红蛋白的电催化还原

本文将电子媒体甲苯胺蓝吸附在石墨电极上制备成修饰电极。在＋０．２～０．５Ｖ（ｖｓ．ＳＣＥ）范围内，吸附态的甲苯胺蓝呈现有两质子参与的可逆性两电子氧化还原行为，在ｐＨ５．５醋酸盐缓冲溶液中，其表面式量电位Ｅ＾０为－０．２２Ｖ，表观表面电子传递速率常数ｋ为１．１Ｓ＾－１，甲苯胺蓝修饰电极具有良好的稳定性，它能加速血红蛋白在固体电极上的电子传递，产生很好的电流响应。     

Facile Synthesis of Amino Shell-Magnetic Core Nanoparticles and Application for Direct Electrochemistry

This paper reports a core-shell nanoparticle system coated on the carbon paste electrode (CPE) for determination of hydrogen peroxide. The amino-functionalized shell-magnetic core nanoparticles have been proven to be an effective material for Hb immobilization. The core-shell nanoparticle system was constructed by immobilizing hemoglobin (Hb) on amino-functionalized shell@magnetic core composite nanoparticles (NH₂-SiO₂-CoFe₂O₄) with the bridge of gold nanoparticles (AuNPs). Electrochemical impedance spectroscopy, cyclic voltammetry, and chronoamperometry were used to characterize the obtained biosensor. The Hb/AuNPs/NH₂-SiO₂-CoFe₂O₄/CPE showed a linear range from 1.9 × 10^?6 to 4.6 × 10^?3 M, with a detection limit of 6.3 × 10^?7 M (S/N = 3) under the optimized experimental conditions. A good affinity was shown due to the small apparent Michaelis–Menten constant of 2.68 mM.     

Immobilization of Hemoglobin on Cobalt Nanoparticles-modified Indium Tin Oxide Electrode:Direct Electrochemistry and Electrocatalytic Activity

A cobalt nanoparticles-attached indium tin oxide(CoNPs/ITO) electrode was applied to the immobilization of hemoglobin(Hb) and an Hb modified CoNPs/ITO electrode(Hb/CoNPs/ITO) was prepared. The direct electron transfer of Hb was shown by the well-behaved voltammetric responses for Hb/CoNPs/ITO electrode and the effects of scan rate and pH value were observed. Based on the catalytic activity of Hb immobilized on the CoNPs/ITO electrode toward the reduction of H₂O₂, a mediator-free H₂O₂ sensor was developed. A linear relationship existed between the catalytic current and the H₂O₂ concentration in a range of 1.0―100.0 μmol/L with a detection limit (S/N=3) of 0.2 μmol/L.     

Precise Design of Covalent Organic Frameworks for Electrocatalytic Hydrogen Peroxide Production

Electrochemical synthesis of H₂O₂ with high productivity is a significant challenge in electrocatalysis. Herein, we develop Mg-ion contained covalent organic frameworks (MgP-DHTA-COF), comprising stacked 2D layers, well-defined skeletons, and well-ordered monodispersed active sites, for the electrocatalytic production of H₂O₂ directly from O₂ and H₂O. The precise-designed MgP-DHTA-COF achieves H₂O₂ selectivity up to 96%, high Faradaic efficiency of 91% and reliable stability for H₂O₂ synthesis in 0.10 mol L⁻¹ KOH aqueous solution. Both experiments and simulations demonstrate that the pyrrolic-N fixed Mg ions in the knots promote the reactivity of COF and enhance the adsorption ability of OOH*. This work provides a valuable example for the design of an efficient electrocatalyst based on COFs for H₂O₂ production.     

Direct Electrochemistry of Horseradish Peroxidase Embedded in Nano－Fe304 Matrix on Paraffin Impregnated Graphite Electrode and Its Electrochemical Catalysis for H2O2

Fe3O4 particles coated with acrylic copolymer (ACP) of about 5--8 nm in diameter were synthesized and used for immobilization of horseradish peroxidase (HRP). Direct electrochemistry of HRP embedded in the nanosized Fe304 solid matrix modified paraffin impregnated graphite electrode (PIGE) was achieved,which is related to the heine Fe(Ⅲ)/Fe(Ⅱ) conversion of HRP. Cyclic voltammetry gave a pair of reproducible and welldefined redox peaks at about Ea of -0.295 V vs. SCE. The standard rate constant k, was determined as 2.7 s^-1. It demonstrated that the nano-Fe3O4 solid matrix offers a friendly platform to assemble the HRP protein molecules and enhance the electron transfer rate between the HRP and the electrode. UV-Vis absorption spectra and WrIR spectra studies revealed that the embedded HRP retained its native-like structure. The HRP/Fe3O4/PIGE showed a strong catalytic activity toward H2O2. The voltammetric response was a linear function of H2O2 concentration in the range of 10-140μmol/L with detection limit of 7.3 μmol/L (s/n = 3 ). The apparent Michaelis-Menten constant is calculated to be 0.42 mmol/L.     

Bisthiol-Assisted Multilayers' Self-Assembly of Gold Nanoparticles: Synthesis,Characterization, Size Control and Electrocatalytic Applications

The layer-by-layer (LBL) approach has been utilized to self-assemble multilayers films of citrate-stabilized gold nanoparticles (AuNPs) on polycrystalline gold (poly-Au) substrates. 1,4-benzenedimethanethiol (BDMT) was used as a cross linker to bind every two successive AuNPs layers. The transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) techniques were employed to confirm the existence of the alternative layers of AuNPs and BDMT in the self-assembled multilayers film. The AuNPs modified poly-Au electrode showed a significant electrocatalysis towards the reduction of oxygen (a positive potential shift of about 100 mV was observed in the reduction peak potential compared to that obtained at the bare poly-Au electrode). The AuNPs tend to aggregate during their assembling to different extent which markedly depends on the substrate geometry and roughness. An effort was dedicated to understand and control the aggregation phenomenon.     

A Synergistic Effect of Phthalimide-Substituted Sulfanyl Porphyrazines and Carbon Nanotubes to Improve the Electrocatalytic Detection of Hydrogen Peroxide

A sulfanyl porphyrazine derivative with peripheral phthalimide moieties was metallated with cobalt(II) and iron(II) metal ions. The purity of the macrocycles was confirmed by HPLC, and subsequently, compounds were characterized using various analytical methods (ES-TOF, MALDI-TOF, UV–VIS, and NMR spectroscopy). To obtain hybrid electroactive electrode materials, novel porphyrazines were combined with multiwalled carbon nanotubes. The electrocatalytic effect derived from cobalt(II) and iron(II) cations was evaluated. As a result, a significant decrease in the overpotential was observed compared with that obtained with bare glassy carbon (GC) or glassy carbon electrode/carbon nanotubes (GC/MWCNTs), which allowed for sensitive determination of hydrogen peroxide in neutral conditions (pH 7.4). The prepared sensor enables a linear response to H₂O₂ concentrations of 1–90 µM. A low detection limit of 0.18 μM and a high sensitivity of 640 μA mM⁻¹ cm⁻² were obtained. These results indicate that the obtained sensors could potentially be applied in biomedical and environmental fields.     

电催化过氧化氢还原的纳米材料作为潜在的辐射防护剂

纳米材料由于独特的物理化学性质,在生物医学领域显示出许多潜在的应用前景,诸如医学成像、药物输运和生物传感等. 这篇综述总结了对过氧化氢和氧还原表现出好的电催化活性的一些纳米材料显示了辐射防护性能. 作者讨论了这些纳米材料的辐射防护性能来源于它们的类酶活性,因为它们的催化性质表现为和活性氧的快速反应,为清除体内的自由基提供了一条有效通道. 作者也提出了纳米材料的电催化活性和作为临床转化关键的辐射防护性能之间关系的见解. 最后,作者指出了这些纳米材料作为新的辐射防护剂用于辐射防护治疗辅助成份所面临的挑战和将来的研究方向.     

基于热解ZIF-8的氮掺杂碳电化学氧还原合成过氧化氢催化剂

氧气的两电子还原反应(2e-ORR)是绿色、安全的H₂O₂合成路线. 本工作以Zn²⁺和2-甲基咪唑合成的沸石型咪唑酸框架-8 (ZIF-8)为前驱体, 通过高温热解炭化, 利用ZIF-8中的锌在高温下的可挥发性, 制备了非金属氮掺杂石墨化多孔碳材料(p-ZIF), 系统考察了ZIF-8热解炭化温度(900、950和1000 ℃)对催化剂结构和2e-ORR催化性能的影响. p-ZIF不仅保留了ZIF-8规整的菱形十二面体形貌, 而且氮含量高, 拥有高的比表面积和多级孔结构. 在酸性条件下的2e-ORR反应中, 三个p-ZIF催化剂均显示了较低的过电位和较低的Tafel斜率, 而且稳定性良好. 其中在H₂O₂选择性最高的p-ZIF-950催化剂上, 过电位为86 mV, H₂O₂选择性最高可达89.2%. 在6 h恒电位反应中, p-ZIF-950催化剂能够以87 mmol•g_cat^-1•h^-1的恒定速率产生H₂O₂. 根据多种表征结果, 推测p-ZIF催化剂的孔径尺寸和石墨N含量是影响其2e-ORR催化性能的主要因素.     

Electrochemistry of Levo‐Thyroxin on Edge‐Plane Pyrolytic Graphite Electrode: Application to Sensitive Analytical Determinations

The electrochemical response of sodium levo‐thyroxin (T₄) at the surface of an edge plane pyrolytic graphite (EPPG) electrode is investigated using cyclic voltammetric technique in the presence of 0.1 M HCl as supporting electrolyte. T₄ underwent totally irreversible oxidation at this system and a well‐defined peak at 821 mV was obtained. Compared to the signals obtained in the optimized conditions at bare glassy carbon and carbon paste electrodes, the oxidation current of T₄ at an EPPG electrode was greatly enhanced. The electrochemical process of T₄ was explored and the experimental conditions were optimized. The oxidation peak current represented a linear dependence on T₄ concentration from 0.01 to 10 µM. The detection limit of 3 nM (S/N=3) was obtained for 250 s accumulation at 0.3 V. Determination of T₄ in a synthetic serum sample demonstrated that this sensor has good selectivity and high sensitivity.     

电沉积双金属微粒电极及对甲醇的电催化研究

以循环伏安法在镍铬铁基体上制备了Pt-Ru微粒电极, 用SEM表征该微粒电极的形貌呈球形, 循环伏安法和计时电流法考察了该电极的电化学性能. 结果表明Pt-Ru微粒电极对甲醇的电氧化显示出催化作用, Ru的加入提高了电极的抗中毒能力. 在相同的实验条件下, Pt-Ru微粒电极对甲醇的催化氧化性能高于纯铂电极, 且该电极制作成本十分低廉、操作简便、对环境无污染, 极大减少了贵金属铂的用量, 可用作燃料电池的电极材料.     

离子液体和KGM修饰电极上的直接电化学

将血红蛋白固定在用室温离子液体和魔芋葡甘聚糖(KGM)水凝胶修饰的玻碳电极上,其循环伏安扫描显示一对可逆的氧化还原电流峰,克式量电位(-0.38V,vs.SCE)随溶液pH值的增大而负移,呈良好的线性关系,斜率为51 mV/pH,表明在离子液体和KGM共同修饰的电极上包埋在魔芋葡甘聚糖水凝胶中的血红蛋白发生了直接可逆的电子传递反应,并伴随有一质子的迁移过程.此外,还考察了该血红蛋白修饰电极对O2还原反应的电催化性能.     

铁氰化钆修饰电极的固态电化学及电催化性能

制备了一种新的稀土铁氰化物——铁氰化钆(GdHCF), 并对其进行了表征. 元素分析、EDX和TGA结果表明, GdHCF的计量式为NaGdFe(CN)6•12H2O(在NaCl溶液中制备), 红外光谱结果显示GdHCF晶体中有两种形式的水分子存在, 一种是靠氢键结合的填隙水分子(5个), 一种是与Gd配位的配位水分子(7个)；XPS结果表明GdHCF中铁为+2价, 钆为+3价. 将GdHCF固定到石墨(SG)电极上(GdHCF/SG), 研究了它的固态电化学性能, 其循环伏安曲线上表现出一对良好且稳定的氧化还原峰, 式量电位E0′几乎不随扫速而变化(在10~300 mV•s−1范围内, E0′平均值为(197±3) mV)；并且E0′与支持电解质中阳离子(Na+)活度的对数(lgaNa+)之间呈线性关系, 斜率为54.1 mV, 这一特性关系可用于测定NaCl溶液中Na+的活度. 进一步研究的结果表明, GdHCF对神经递质多巴胺(DA)和抗坏血酸(AA)的电化学氧化均具有催化作用, 催化电流随DA(或AA)浓度的增加而增加.