聚谷氨酸修饰电极同时检测对苯二酚和邻苯二酚

以谷氨酸单体为初始试剂,利用电化学聚合方法制备得到聚谷氨酸修饰电极.考察了电化学聚合条件(电位、扫速及扫描圈数)对修饰电极的影响,运用电化学方法对所制备的修饰电极进行了表征.此修饰电极对对苯二酚和邻苯二酚的电化学氧化还原显示出很高的催化能力,显著降低了二者的氧化电位,改善了二者的电化学可逆性,同时增强了二者的氧化还原峰...     

聚苯胺-石墨烯修饰玻碳电极同时测定邻苯二酚和对苯二酚

本文制备了聚苯胺-石墨烯修饰玻碳电极,并用循环伏安(CV)法和微分脉冲伏安(DPV)法研究了邻苯二酚(CC)和对苯二酚(HQ)在该修饰电极上的电化学行为。实验结果表明,相对于裸玻碳电极,HQ和CC在聚苯胺-石墨烯修饰电极上的氧化峰电流显著提高,氧化峰电位相差104.8mV,实现了CC和HQ的选择性测定。DPV法同时测定二酚时,HQ和CC分别在1.0×10-6~8.0×10-4 mol/L浓度范围内与其峰电流呈良好的线性关系,相关系数R分别为0.998、0.997,检出限(S/N=3)分别为1.0×10-7、8.0×10-8mol/L。将该方法用于模拟水样分析,回收率为95.3%~103.5%。     

碳纳米管修饰电极同时测定邻苯二酚和对苯二酚

用十二烷基磺酸钠(SDS)分散碳纳米管(CNTs),通过层层组装(LBL)聚二甲基二烯丙基氯化铵(PDDA)和CNTs构筑PDDA/CNTs多层膜电极.利用紫外-可见光谱法对PDDA/CNTs多层膜的组装过程进行监测,用循环伏安法(CV)和差分脉冲伏安法(DPV)研究了邻苯二酚和对苯二酚同时存在时PDDA/CNTs多层膜电极上的电化学行为.结果表明,碳纳米管修饰电极对邻苯二酚和对苯二酚有较好的电催化活性和电分离作用,邻苯二酚和对苯二酚无需经过分离即可同时被检出.在修饰电极上的线性范围如下:邻苯二酚为2.0×10-6~1.4×10-4mol/L,线性相关系数R=0.9991;对苯二酚为2.0×10-6~1.4×10-4mol/L,线性相关系数R=0.9987.     

Simultaneous Determination of Catechol and Hydroquinone on Nano-Co/L-Cysteine Modified Glassy Carbon Electrode

In this study, a novel and highly sensitive electrochemical method for simultaneous determination of catechol (CC) and hydroquinone (HQ) was developed, which worked at GCE modified with Nano cobalt (Nano-Co) by electrodeposition and L-Cysteine by electrochemical polymerization. The Nano-Co/L-Cysteine GCE was investigated by cyclic voltammetry (CV), SEM and EIS. The excellent conditions have been selected including supporting electrolyte, pH, accumulation time and scan rate. The calibration curves of were obtained that the linear regression equation was I=0.0734c+6×10⁻⁶ in the range of 5.8 μM to 103 μM (R²=0.9942) for CC and the linear regression equation was I=0.0566c+5×10⁻⁶ in the range of 5.8 μM to 100 μM (R²=0.9967) for HQ. The obtained detection limits of CC and HQ both were 6×10⁻⁷ M. The modified electrode was successfully applied to the simultaneous determination of CC and HQ in water samples.     

金电极上苯二酚异构体的电化学性质及同时测定

采用循环伏安法研究了邻苯二酚(CAT)、间苯二酚（RE）和对苯二酚(HQ)在0.5 mol/L硫酸水溶液中的电化学行为,循环伏安法和差分脉冲伏安法研究了CAT、RE 和HQ共存体系的伏安行为。 实验结果表明,在pH=0的硫酸水溶液中,扫描速率为10 mV/s,循环伏安法扫描电位在0～1.2 V（vs.Ag/Cl）时,分离效果明显。 本文采用差分脉冲伏安法,测定了CAT、RE和HQ的混合物,检出限依次为3.9×10-6、3.9×10-6和7.8×10-6 mol/L。 将该方法用于合成样品测定,其精密度和准确度均满足分析要求。     

Simultaneous Determination of Hydroquinone and Catechol at a Glassy Carbon Electrode Modified with Multiwall Carbon Nanotubes

A simply and high selectively electrochemical method for simultaneous determination of hydroquinone and catechol has been developed at a glassy carbon electrode modified with multiwall carbon nanotubes (MWNT). It was found that the oxidation peak separation of hydroquinone and catechol and the oxidation currents of hydroquinone and catechol greatly increase at MWNT modified electrode in 0.20 M acetate buffer solution (pH 4.5). The oxidation peaks of hydroquinone and catechol merge into a large peak of 302 mV (vs. Ag/AgCl, 3 M NaCl) at bare glassy carbon electrode. The two corresponding well‐defined oxidation peaks of hydroquinone in the presence of catechol at MWNT modified electrode occur at 264 mV and 162 mV, respectively. Under the optimized condition, the oxidation peak current of hydroquinone is linear over a range from 1.0×10^?6 M to 1.0×10^?4 M hydroquinone in the presence of 1.0×10^?4 M catechol with the detection limit of 7.5×10^?7 M and the oxidation peak current of catechol is linear over a range from 6.0×10^?7 M to 1.0×10^?4 M catechol in the presence of 1.0×10^?4 M hydroquinone with the detection limit of 2.0×10^?7 M. The proposed method has been applied to simultaneous determination of hydroquinone and catechol in a water sample with simplicity and high selectivity.     

Simultaneous Determination of Hydroquinone and Catechol at an Activated Glassy Carbon Electrode

A selective and very simple electrochemical method, based on anodization of a glassy carbon electrode (GCE), was developed for the simultaneous detection of hydroquinone (HQ) and catechol (CT). It was found that the activated GCE showed an excellent catalytic behavior and enhanced reversibility towards the oxidation of both HQ and CT. The redox responses from the mixture of HQ and CT were easily resolved at an activated GCE. The detection limits for HQ and CT were calculated to be 0.16 and 0.11 μM, respectively. The activated GCE was successfully examined for real sample analysis with tap water and it showed a stable and reliable recovery data.     

聚L-半胱氨酸/多壁碳纳米管复合修饰电极同时测定邻苯二酚和对苯二酚

将羧基化多壁碳纳米管分散在L-半胱氨酸溶液中并滴涂在玻碳电极表面.将上述电极在pH 6.9的B-R缓冲溶液中,于-1.0～2.5 V的电位范围内进行电聚合,制备了聚L-半胱氨酸/多壁碳纳米管复合修饰电极(Pol-L-Cys/MWCNTs/GCE).研究发现,邻苯二酚和对苯二酚在聚L-半胱氨酸/多壁碳纳米管复合修饰电极上分别出现了一对氧化还原峰,且两者的氧化峰电位差达101 mV,提出了用微分脉冲伏安法同时测定邻苯二酚和对苯二酚的方法.氧化峰电流与邻苯二酚和对苯二酚的浓度在1.0×10-5～1.0×10-3mol·L-1呈线性关系,检出限(3S/N)均达1.0×10-5mol·L-1.修饰电极用于模拟样品中邻苯二酚和对苯二酚的测定,回收率在82.0%～107.0%之间.     

金纳米粒子-过氧化聚吡咯-碳纳米管复合膜修饰电极同时测定对苯二酚和邻苯二酚

将多壁碳纳米管(MWCNTs)滴涂于复合陶瓷碳电极(CCE)表面,采用电化学方法在碳纳米管表面逐层沉积过氧化聚吡咯(OPPy)和金纳米粒子(AuNPs),制得金纳米粒子-过氧化聚吡咯-多壁碳纳米管复合膜修饰电极(AuNPs-OPPy-MWCNTs/CCE).采用扫描电镜和电化学方法对修饰电极进行了表征.在0.10 mol/LPBS (pH 7.0)缓冲溶液中研究了对苯二酚(HQ)和邻苯二酚(CC)在修饰电极上的电化学行为.结果表明,修饰电极对HQ和CC的电极过程具有良好的电化学响应和区分效应.基于此建立了一阶导数伏安法同时测定HQ和CC的方法,HQ和CC的线性范围均为2.0×10-7～ 1.0×10-4 mol/L,检出限分别为6.0×10-8 mol/L和8.0×10-8 mol/L(S/N=3).模拟水样中的加标回收率分别为96.2％～99.8％ (HQ)和96.0％～100.0％,表明本方法具有良好的实用性.     

A Novel Sensitive Electrochemical Sensor for the Simultaneous Determination of Hydroquinone and Catechol using Tryptophan-Functionalized Graphene

A novel tryptophan-functionalized graphene nanocomposite was employed for the simultaneous determination of hydroquinone and catechol. The analyte electrochemical behavior on the surface of tryptophan-functionalized graphene was investigated by cyclic voltammetry and differential pulse voltammetry. Compared to conventional graphene, enhanced peak currents were obtained that were attributed to the large number of defects on tryptophan-functionalized graphene that accelerated electron transfer between the electrode and analytes. The peak potential difference between hydroquinone and catechol at the tryptophan-functionalized graphene modified glassy carbon electrode was 104 millivolt, which was sufficiently wide to simultaneously determine hydroquinone and catechol. This method was used for the analysis of tap water.     

Simultaneous Determination of Hydroquinone and Catechol by Differential Alternative Pulses Voltammetry

The second order voltammetric technique of high resolution, Differential Alternative Pulses Voltammetry (DAPV), was applied for the simultaneous determination of hydroquinone (HQ) and catechol (CC) on bare spectroscopic graphite electrode. Well resolved anodic and cathodic peaks situated on both sides of the zero line were obtained, while the differential pulse voltammograms were overlapped. The linear concentration range for HQ and CC quantification by DAPV was extended up to 20 μmol L⁻¹ for both the isomers. The sensitivity of the determination was found to be 6.00 μA L μmol⁻¹ and 3.61 μA L μmol⁻¹, while the limit of detection reached was 0.2 μmol L⁻¹ and 0.5 μmol L⁻¹ for HQ and CC, respectively. No interference was observed from the commonly coexisting organic species such as resorcinol, phenol and p‐benzoquinone. The great resolution power of DAPV permitted obtaining excellent results without any electrode modification and any mathematical data processing.     

Simultaneous Determination of Nickel(II) and Cobalt(II) by Second-Derivative Spectrophotometry

4-(2-Pyridylazo) resorcinol, PAR, is shown to be useful for simultaneous determination of cobalt(II) and nickel(II) using second-derivative spectrophotometric method with controlled experimental parameters. This method allows the determination of 0.20-1.25 ppm of nickel(II) and 0.25-1.50 ppm of cobalt(II) in mixtures with good precision and accuracy. This method has advantages of simplicity, speed and requires no prior separations.     

Platinum Nanoparticles/Poly(isoleucine) Modified Glassy Carbon Electrode for the Simultaneous Determination of Hydroquinone and Catechol

A new electrochemical sensor based on Poly(Isoleucine) modified glassy carbon electrode decorated with platinum nanoparticles (Pt/Poly(Isoleucine)/GCE) was developed for sensitive individual and simultaneous determination of hydroquinone (HQ) and catechol (CC). Scanning electron microscopy (SEM), Electrochemical impedance spectroscopy (EIS), Cyclic voltammetry (CV) and Differential pulse voltammetry (DPV) were performed in order to characterize the Pt/Poly(Isoleucine)/GCE nanocomposite. For simultaneous determination of HQ and CC, Pt/Poly(Isoleucine)/GCE showed wide linear range between the 0.01–100.0 μM. The detection limits were 0.006 μM for HQ and 0.005 μM for CC. The Pt/Poly(Isoleucine)/GC electrode exhibited good sensitivity and reliability in the simultaneous electroanalysis of two isomers in PBS of pH 7.5. The modified electrode was used to detect the isomers in naturel samples.     

邻苯二酚和对苯二酚在钴氢氧化物膜修饰玻碳电极上的选择性测定

通过镀膜/循环伏安法制备了钴氢氧化物膜修饰的玻碳电极。该修饰电极对邻苯二酚(CA)和对苯二酚(HQ)具有较强的电催化活性。考察了支持电解质酸度对邻苯二酚和对苯二酚电化学响应的影响,选用0.1 mol/LPBS(pH 10.0)作为支持电解质。利用差示脉冲伏安法(DPV)对邻苯二酚和对苯二酚进行选择性检测,当两者浓度同时改变时,邻苯二酚和对苯二酚在6～100μmol/L范围内氧化峰电流与其浓度呈良好的线性关系,检出限分别为2×10–7,5×10–7mol/L(S/N=3)。钴氢氧化物膜电极具有较好的稳定性、重现性及较强的抗干扰能力,将此修饰电极应用于模拟水样中邻苯二酚和对苯二酚的测定,回收率为95.4%～100.4%。     

磷钼钒杂多酸-聚邻苯二胺修饰碳糊电极示差脉冲溶出伏安法测定对苯二酚和邻苯二酚

在由磷钼钒杂多酸和邻苯二胺组成的支持电解质中,以0.100V.s-1扫速在碳糊电极上,于0.800～-0.800V范围内循环扫描20周后,制得磷钼钒杂多酸-聚邻苯二胺修饰碳糊电极。循环伏安法研究发现:对苯二酚(HQ)和邻苯二酚(CC)在该修饰电极上均出现了一对氧化还原峰;示差脉冲溶出伏安法研究发现:HQ和CC分别在0.140V和0.288V处出现二次微分溶出峰,两峰电位差为0.148V。HQ和CC的线性范围均为1.50×10-7～7.50×10-4 mol.L-1,检出限(3S/N)均为6.80×10-8 mol.L-1。据此提出了示差脉冲溶出伏安法测定模拟水样中HQ和CC,测得回收率在94.0%～106.0%之间。     

银掺杂聚L-甲硫氨酸修饰电极同时测定对苯二酚和邻苯二酚

用循环伏安法制备了银掺杂聚L-甲硫氨酸修饰玻碳电极,研究了对苯二酚和邻苯二酚在该修饰电极上的电化学行为,建立了同时测定对苯二酚和邻苯二酚的新方法.研究发现,在pH=5.0的磷酸盐缓冲溶液中,扫速为100 mV/s时,对苯二酚和邻苯二酚在银掺杂聚L-甲硫氨酸修饰玻碳电极上均出现1对氧化还原峰,峰电位分别为:Epa=0.228 V、Epc =0.162 V和Epa=0.347 V、Epc =0.287 V,二者的氧化峰电位差达119 mV,还原峰差达125 mV.在最佳的条件下,用差分脉冲伏安法同时测定邻苯二酚和对苯二酚的线性范围为3.00 ×10-6～1.00 ×10-4mol/L,检出限为8.0×10-7 mol/L(对苯二酚)和5.0×10-7 mol/L(邻苯二酚).此法用于废水样中对苯二酚和邻苯二酚的测定,获得满意结果.     

Electrochemical Sensing Platform Based on Lotus Stem-derived Porous Carbon for the Simultaneous Determination of Hydroquinone,Catechol and Nitrite

A simple and highly selective electrochemical sensor based on carbonized lotus stem (CLS) was developed for the simultaneous determination of hydroquinone (HQ), catechol (CC), and nitrite (NT) by using cyclic voltammetry (CV) and amperometry (AMP) methods. The CLS was characterized by the methods including field emission scanning electron microscopy (FE-SEM), Raman spectrum, FT-IR spectrum and X-ray diffraction (XRD). Brunauer-Emmett-Teller (BET) method was used to evaluate the pore structure and surface area of CLS. The oxidation peaks for HQ (116.2 mV), CC (220.1 mV), and NT (818.9 mV) were well separated under optimized conditions, which improved their simultaneous determination. The CLS modified electrode showed a good linear range between 1.0×10 ⁻⁶ to 7.0×10 ⁻⁴ M for HQ, and the detection limit was calculated as 0.15 μM. For CC the linear relationship was 1.0×10 ⁻⁶ to 3.0×10 ⁻³ M with the detection limit of 0.11 μM. For NT the linear relationship was 5.0×10 ⁻⁷ to 4.0×10 ⁻³ M with the detection limit of 0.09 μM. The results indicated that the intrinsic structure of natural biomass can be expected to design porous carbon for electrochemical sensors.     

Simultaneous determination of hydroquinone and catechol at PASA/MWNTs composite film modified glassy carbon electrode

A poly-amidosulfonic acid and multi-wall carbon nanotubes composite (PASA/MWNTs) modified electrode has been constructed by electropolymerization on glassy carbon electrode (GCE). The electrochemical behaviors of hydroquinone (HQ) and catechol (CC) were investigated using cyclic and differential pulse voltammetries (DPVs) at the prepared electrode. Separation of the reductive peak potentials for HQ and CC was about 120 mV in pH 6.0 phosphate buffer solution (PBS), which makes it suitable for simultaneous determination of these compounds. In the presence of 1.0 × 10⁻⁴ mol L⁻¹ isomer, the reductive peak currents of DPV are proportional to the concentration of HQ in the range of 6.0 × 10⁻⁶ to 4.0 × 10⁻⁴ mol L⁻¹, and to that of CC in the range of 6.0 × 10⁻⁶ to 7.0 × 10⁻⁴ mol L⁻¹. When simultaneously changing the concentration of both HQ and CC, the linear concentration range of HQ (or CC) is 6.0 × 10⁻⁶ to 1.0 × 10⁻⁴ mol L⁻¹ (or 6.0 × 10⁻⁶ to 1.8 × 10⁻⁴ mol L⁻¹), and the corresponding detection limits are 1.0 × 10⁻⁶ mol L⁻¹. The proposed method has been applied to simultaneous determination of HQ and catechol in water sample, and the results are satisfactory.     

卡尔曼滤波紫外光度法同时测定邻、间、对苯二酚

研究了苯二酚三种分异构体水溶液的紫外吸收光谱，在ＰＨ３．６的缓冲溶液中，邻、间、对苯二酚的紫我吸收峰分别为２７５ｎｍ，２７３ｎｍ和２８８ｎｍ三者重叠严重。选取在２４０ｎｍ－２９０ｎｍ范围内，每隔１ｎｍ测量一次吸光值截５１个点，采用卡尔曼滤波进行处理，可以获得较满意的结果，对１０个不同比例组成 标准混合液进行测定，邻、间、对苯二酚三者的平均回收率分别为９７．４％，１０１、７％和９８．０％，标准偏差分     

卡尔曼滤波紫外光度法同时测定邻、间、对苯二酚

研究了苯二酚三种同分异构体水溶液的紫外吸收光谱，在ｐＨ３．６的缓冲溶液中，邻、间、对苯二酚的紫外吸收峰分别为２７５ｎｍ、２７３ｎｍ和２８８ｎｍ，三者重叠严重。选取在２４０ｕｍ～２９０ｎｍ范围内，每隔１ｎｍ测量一次吸光值共５１个点，采用卡尔曼滤波进行处理。可以获得较满意的结果。对１０个不同比例组成的标准混合液进行测定，邻、间、对苯二酚三者的平均回收率分别为９７．４％，１０１．７％和９８．０％，标准偏差分别为１．７２％，３．８６％和２．０４％。对模拟试样中加入标准的回收率均在９６．０％～１０３．０％之间。