Determination of 1‐Naphthol with Denatured DNA–Modified Pretreated Glassy Carbon Electrode

Abstract

A highly sensitive electrochemical biosensor for the detection of trace amount of 1‐naphthol was designed. Acid‐denatured DNA were immobilized onto the pretreated glassy carbon electrode (GCE(ox)) surface. Two well‐defined oxidation peaks were observed on the denatured DNA‐modified GCE(ox) at about +0.80 V and +1.10 V (vs. Ag/AgCl) in 0.10‐M acetate buffer (pH 5.0). The peak current of the guanine residue decreased with increasing concentration of 1‐naphthol. The optimum experimental conditions for the detection of 1‐naphthol were explored, and the calibration was linear for 1‐naphthol in the range of 1.0×10^?8?1.1×10^?6 M, with a correlation coefficient of 0.998. The limit of detection (LOD) was 5.0×10^?9 M (S/N=3).     

Determination of Methimazole and Carbimazole Using Polarography and Voltammetry

Abstract

Anodic waves of methimazole (I) (1-methylimidazole-2-thiol) and carbimazole (II) (1-ethoxycarbonyl-3-methyl-2-thio-4-imidazoline) on mercury electrodes correspond to mercury salt formation. Both compounds form in the thiono form a soluble complex at pH < 6, compound (I) at higher pH-values a slightly soluble salt of the thiol form. Electrode processes involving the thiol form are complicated by adsorption. Oxidation at solid electrodes occurs only at potentials more than 0.5 V more positive. For compound (I) spectrophotometry indicated pK_a=12.0 ± 0.2. By d.c. polarography in 0.1 M H₂SO₄ containing 10% ethanol the determination of both compounds is possible between 4 × 10^? and 1 × 10^?3 M, by differential pulse polarography between 1 × 10^? and 1 × 10^?4 M, by differential pulse voltammetry at HMDE between 5 × l0^?7 and 6 × 10^? M.     

Cathodic and Adsorptive Stripping Votammetry of Naftazone

Abstract

Naftazone (1,2-naphthoquinone-2-semicarbazone) undergoes a reversible two-electron transfer in both acidic and alkaline solutions and also gives rise at pH > 7 to an anodic wave attributed to the formation of a mercury derivative. Cathodic stripping voltammetry is proposed to determine the compound down to 5 × 10^?9 M after accumulation of its mercury salt formed at -0.05V in a 0.05M sodium hydroxide solution. These results have been compared with those obtained by performing an adsorptive collection of the drug in a pH 3 sodium perchlorate solution. Concentrations ranging from 1 × 10^?7 to 2 × 10^?7M can be easily investigated, the detection limit being 7 × 10^?11M. The influence of several operational parameters has also been considered.     

Indication Ion Square Wave Voltammetric Determination of Thiamine and Ascorbic Acid

Abstract

Cd²⁺ ion was used as an electrochemical indicator to detect V_B1 or Vc using square ware voltammetry (SWV) at a mercury film‐coated glassy carbon (GC) electrode. At pH=10 NH₃‐NH₄Cl buffer, a new cathodic peak was found at ?0.360 V (vs.SCE) by addition of thiamine, and the peak current of SWV was linear with the concentration of thiamine in the range of 1×10^?6 to 4×10^?3 M. On the other hand, the SWV peak current of Cd²⁺ at ?0.856 V linearly decreased with addition of ascorbic acid in the range of 6×10^?6～10^?3 M. The effects of interference, such as citric acid, DL‐malic acid, and calcium panlothenate, on thiamine or ascorbic acid determination were investigated. This method was successfully applied to the determination of thiamine or in pharmaceutical preparation.     

Amperometry of thiols in a flow-injection system with a nickel oxide electrode

The electrochemical oxidation of a series of thils on the surface of a nickel oxide electrode is investigated in a flow-injection system. The background electrolyte is 0.1 M NaOH containing 5 × 10^?65 M NiSO₄ and the injected sample volume is 25 μl. The net peak current is observed at +0.46 V vs. SCE for thiols dissolved in pH 3.0 phthalate buffer. The upper limit of linearity extends to 10^?3 M. The relative standard deviation for ten replicate measurements on 10^?4 M ethanethiol is 1.6%. The lower limits of detection are between 3 × 10^?5 and 2 × 10^?4 M for a series of thiols. Peak shapes indicate that thiolate oxidation mediated by a higher oxide layer on the electrode rather than mass transport or adsorption / rearrangement is the rate-determining step.     

Electroanalytical Study of the Pesticide Ethiofencarb

Abstract

A detailed study of voltammetric behavior of ethiofencarb (ETF) is reported using glassy carbon electrode (GCE) and hanging mercury drop electrode (HMDE). With GCE, it is possible to verify that the oxidative mechanism is irreversible, independent of pH, and the maximum intensity current was observed at +1.20 V vs. AgCl/Ag at pH 1.9. A linear calibration line was obtained from 1.0×10^?4 to 8.0×10^?4 mol L^?1 with SWV method. To complete the electrochemical knowledge of ETF pesticide, the reduction was also explored with HMDE. A well‐defined peak was observed at –1.00 V vs. AgCl/Ag in a large range of pH with higher signal at pH 7.0. Linearity was obtained in 4.2×10^?6 and 9.4×10^?6 mol L^?1 ETF concentration range.

An immediate alkaline hydrolysis of ETF was executed, producing a phenolic compound (2‐ethylthiomethylphenol) (EMP), and the electrochemical activity of the product was examined. It was deduced that it is oxidized on GCE at +0.75 V vs. AgCl/Ag with a maximum peak intensity current at pH 3.2, but the compound had no reduction activity on HMDE.

Using the decrease of potential peak, a flow injection analysis (FIA) system was developed connected to an amperometric detector, enabling the determination of EMP over concentration range of 1.0×10^?7 and 1.0×10^?5 mol L^?1 at a sampling rate of 60 h^?1. The results provided by FIA methodology were performed by comparison with results from high‐performance liquid chromatography (HPLC) technique and demonstrated good agreement with relative deviations lower than 4%. Recovery trials were performed and the obtained values were between 98 and 104%.     

Sequential extraction partitioning of metals,sulfur, and phosphorus in bottom ash from a coal-fired power plant

Abstract

The herbicide trifluralin was analysed by adsorptive stripping voltammetry on a glassy carbon electrode. The linear concentration range was 2.5 × 10^?7 M – 1.25 × 10^?6M when using 5-min preconcentration at open circuit conditions in Britton-Robinson buffer of pH 7.0. The detection limit of trifluralin was 2.5 × 10^?8M. The relative standard deviation was 3.3% at a concentration of 1.0 × 10^?6M (n=5). The method was applied to the determination of trifluralin in soil with good recovery.     

Cyclic Voltammetric Behavior of Uranyl ion in Sulfuric Acid Solutions. Application to Some Nuclear Materials Characterization

Abstract

The U(VI) reduction at mercury electrode in sulfuric acid solutions was examined by cyclic voltammetry (C. V.). A diffusion coefficient, D, was (5.30 ± 0.08) × 10^?6 cm²/sec was obtained for the depolarizer at 25.0±0.2°C in 1 N K₂SO₄ (pH = 2). In 1 N K₂SO₄/1 N H₂,SO₄ systems the disproportionation of U(V) was found to occur with the constant rate of K_d/[H⁺] = 6.500 ± 1.000 M^?2 sec^?1.

In 1 M H₂SO₄ supporting electrolyte pure kinetic control was achieved over the range of scan rates and uranyl concentration (C) investigated, hence linear correlation between cathodic peak current and C (above 5x10^?6 M) was obtained. Strong complexing oxyanions, such as phosphate and pyrosulphate, do not interfere with the cathodic peak current. Rapid determination of O/U ratios in uranium oxides and of U in mixed U-Th materials were performed respectively in 1 M H₂SO₄/1.5 M H₃PO₄ and 1 M H₂SO₄/0.2 M K₂S₂0₄ supporting media, with a reproducibility of ± 1.3% standard deviation.     

THE INTERACTION OF 2-AMINO-2-HYDROXYMETHYL-1,3-PROPANEDIOL WITH COBALT(II) AND MANGANESE(II) IONS

Abstract

The stepwise complex formation between 2-amino-2-hydroxymethyl-1,3-propanediol (TRIS) with Co(II) and Mn(II) was studied by potentiometry at constant ionic strength 2.0 M (NaClO₄) and T = (25.0 ± 0.1)°C, from pH measurements. Data of average ligand number (Bjerrum's function) were obtained from such measurements followed by integration to obtain Leden's function, F ₀(L). Graphical treatment and matrix solution of simultaneous equations have shown two overall stability constants of mononuclear stepwise complexes for the Mn(II)/TRIS system (β₁ = (5.04 ± 0.02) M^?1 and β₂ = (5.4 ± 0.5) M^?2) and three for the Co(II)/TRIS system (β₁ = (1.67 ± 0.02) × 10² M^?1, β₂ = (7.01 ± 0.05) × 10³ M^?2 and β₃ = (2.4 ± 0.4) × 10⁴ M^?3). Slow spontaneous oxidation of Co(II) solutions by dissolved oxygen, accelerated by S(IV), occurs in a buffer solution TRIS/HTRIS⁺ 0.010/0.030 M, with a synergistic effect of Mn(II).     

Sensitive Determination of Clomipramine at Poly‐ABSA/Pt Nano‐Clusters Modified Glassy Carbon Electrode

Abstract

Clomipramine, an important tricylic antidepressant drug with low redox activity, was effectively electrocatalyzed on poly‐aminobenzene sulfonic acid/Pt nano‐clusters modified glassy carbon electrode (i.e., poly‐ABSA/Pt/GCE) and generated a sensitive anodic peak at about 0.80 V in pH 8.1 PBS. ABSA was electropolymerized on the surface of GCE modified with Pt nano‐clusters. Pt nanoparticles provide a 3 D and conductive structure for the polymer immobilization. The resulting sensor exhibited a considerable enhancement in voltammetric response characteristics: extending the linear range and lowering the detection limit. The anodic peak current of clomipramine was linear with its concentration over two concentration intervals, viz., 1.0×10^?7～4.0×10^?6 M and 4.0×10^?6～4.0×10^?5 M, with the detection limit of 1.0×10^?9 M (S/N=3). This method was successfully applied to the determination of clomipramine in drug tablets and proved to be reliable compared with UV.     

Microdetermination of Molybdenum in Iron and Biological Samples by Adsorption Voltammetry

Abstract

Molybdenum has been determined by adsorption′voltammetry in a pH 2.40 buffer solution (0.005M N_aH₂PO₄-0.01M H₃PO₄). Utilizing the Strong adsorption of 12-molybdenum phosphate at a hanging mercury electrode, nanomole sensitivities are achieved. The derivative peak current is directly proportional to the concentration of molybdenum (VI) over the range of 5×10–9?2×10^?7M. The detection limit is 4×10^?9M.     

The Electrochemical Behavior of Neurotransmitters at a Poly (Pyrrole‐ β‐Cyclodextrin) Modified Glassy Carbon Electrode

Abstract

A glassy carbon electrode surface was modified with an electropolymerized film made of pyrrole and β‐cyclodextrin 1∶1, in a 0.1 M LiClO₄ solution using cyclic voltammetry. The resulting modified electrode (Ppy/β‐CD) exhibits interesting electrocatalytic activity toward the electrochemical oxidation of neurotransmitters such as dopamine (DA) and norepinephrine (NE). Well‐resolved and reversible cyclic voltammograms (CVs) were obtained for these organic compounds in a 0.1 M H₂SO₄ solution. The effect of the pH on the voltammetric response of DA and NE was also investigated inside the range of pH 2.8–8.4. The oxidation current of norepinephrine increase linearly with the concentration inside the range of 4×10^?7 M–2×10^?6 M. The oxidation current of dopamine also followed the same trend range of 2×10^?6 M–10^?5 M. The detection limit was 6×10^?6 M for (DA) and 8×10^?7 M for (NE). As an example, the relative standard deviation for 1×10^?5 M of DA was 2.056%. The diffusion coefficients D for the molecules studied were determined by means of the measurement of the effect of the scan rate on the CVs of the neurotransmitters. All the results showed that the electron transfer was predominantly diffusion controlled at the conducting polymer/solution interface.

Interference phenomenon due to ascorbic acid (AA) toward the neurotransmitters was also investigated. The novel modified electrodes presented capability to resolve perfectly the AA and neurotransmitters oxidation peaks. This performance could be achieved even at a concentration 20 times higher than the neurotransmitters.

Finally, the newly fabricated Ppy/β‐CD film exhibits interesting analytical performances compared with other systems in the literature, such as higher sensitivity, rapid response, good mechanical stability and reproducibility.     

Characterization of Anilinepentacyanoferrate (II) and (III)

The anilinepentacyanoferrate (II) complex has been characterized in aqueous solution. The complex exhibits a predominant ligand field transition at λ_max = 415 nm with ?_max = 494 M^?1 cm^?1. The corresponding Fe(III) complex displays a strong absorption at λ_max = 700nm(?_max = 1.61×10⁴ M^?1 sec^?1) which can be assigned as a ligand to metal charge transfer transition. The rate constants of formation and dissociation for the Fc(II) complex are (3.14±0.18)×10² M^?1W^?1 and 0.985±0.005 sec^?1, respectively, at μ = 0.10 M LiClO₄, pH = 8 and T = 25°C. The cyclic voltammetry of the complex shows that a reversible redox process is observed with E_1/2 value of 0.51±0.01 V vs. NHE at μ = 0.10 M LiClO₄, pH = 8 and T = 25°C. The kinetic study of the oxidation of the Fe(II) complex by ferricyanide ion yielded the rate constant of the reaction k_et = (1.43±0.04)x10 M sec^?1 at μ = 0.10 M LiClO₄, pH = 8 and T = 25°C.     

Simultaneous determination of dopamine, uric acid and ascorbic acid with LaFeO3 nanoparticles modified electrode

LaFeO₃ nanoparticles of approximately 22 nm in size were synthesized and characterized by XRD and TEM. A novel glassy carbon electrode modified with LaFeO₃ nanoparticles was constructed and characterized by electrochemical impedance spectroscopy and cyclic voltammetry. The modified electrode exhibited strong promoting effect and high stability toward the electrochemical oxidation of dopamine (DA), which gave reversible redox peaks with a formal potential of 0.145 V (vs. Ag/AgCl) in pH 7.0 phosphate buffer solution. The anodic peak current (measured by constant potential amperometry) increased linearly with the concentration of dopamine in the range from 1.5?×?10^?7 to 8.0?×?10^?4 M. The detection limit was 3.0?×?10^?8 M. The relative standard deviation of eight successive scans was 3.47% for 1.0?×?10^?6 M DA. The interference by ascorbic acid was eliminated efficiently. The method was used to determine DA in dopamine hydrochloride injections and showed excellent sensitivity and recovery.     

Amperometric Biosensor for Evaluation of Competitive Cholinesterase Inhibition by the Reactivator HI‐6

Abstract

Amperometric biosensors containing enzymes butyrylcholinesterase or acetylcholinesterase were prepared. The biosensors were employed for studying of cholinesterase reactivator: HI‐6. Competitions between HI‐6 and acetylthiocholine as enzyme substrate were used for determination of IC₅₀ value. Biosensors with butyrylcholinesterase from human serum determined IC₅₀ as (1.00±0.02)×10^?6 M; the biosensor with acetylcholinesterase from human erythrocytes performance provided IC₅₀ (3.31±0.13)×10^?6 M, the one with human recombinant acetylcholinesterase (2.00±0.06)×10^?6 M and finally biosensor with acetylcholinesterase from electric eel (6.17±0.17)×10^?6 M when 5 mM acetylthiocholine as substrate was used. We are encouraged to consider presented biosensors as a very useful for evaluation of newly prepared cholinesterase reactivators.     

The Use of the CS2N− 3/HSO− 3/O2 Reaction for the Analytical Determination of Dissolved Oxygen

Abstract

A new analytical Spectrophotometric method has been developed for the determination of dissolved O₂ in the range 4.6 × 10^?6?4.1 × 10^?5M, based on the CS₂N^? ₃/HSO^? ₃/O₂ reaction. In one single experiment 2.3 × 10^?5 M of oxygen can be determined with an uncertainty of ± 7 × 10^?7M for a confidence level of 95%.     

Electrochemical Behavior of a Gold Electrode Modified with SWNTs/DDAB Films and Its Electrocatalytic Activity Towards Ascorbic Acid

A film of single-wall carbon nanotubes (SWNTs) and didodecyldimethylammonium bromide (DDAB) is prepared by casting a solution of SWNTs and DDAB onto the surface of a gold electrode. The electrochemical behavior of the film is investigated by electrochemical impedance spectroscopy and cyclic voltammetry. In a 0.10 M phosphate buffer solution of pH 7.0, the film-modified electrode gives a pair of redox peaks in cyclic voltamograms, with the anodic and cathodic peak potentials of 0.095 and 0.042 V. The peak currents change linearly with the scan rate at 30–500 mV/s. The modified electrode has an excellent electrocatalytic activity towards the oxidation of ascorbic acid (AA). The catalysis currents are proportional to the AA concentration in the range of 5.0 × 10⁻⁴ to 3.2 × 10⁻² M. The linear-regression equation is i (μA) = 1.2079 + 1.3987 × 10³ c _AA (M), with a correlation coefficient of 0.9995. The detection limit is 2.2 × 10⁻⁴ M (signal-to-noise ratio of 3). The Michaelis-Menten constant (K _m) is 1.0 × 10⁻⁴ M by the Lineweaver-Burk equation. __________ From Elektrokhimiya, Vol. 41, No. 10, 2005, pp. 1193–1199. Original English Text Copyright ? 2005 by Cheng, Jin, Zhang. The text was submitted by the authors in English.     

Flow-Injection Spectrophotometric Determination of Oxalate,Citrate and Tartrate Based on Photochemical Reactions

Abstract

A flow-injection configuration for the spectrophotometric determination of oxalate, citrate and tartrate is proposed. The procedure is based on the photochemical decomposition of the complexes formed between iron(III) and these anions. The iron(II) produced in the photochemical reactions was detected by measuring the absorbance after complexation with ferrozine (λ_max=562 nm). Linear calibration graphs were obtained over the concentration ranges 5.0 × 10^?6 - 1.0 × 10^?4 M, 8 × 10^?6 - 1.8 × 10^?4 M and 1.0 × 10^?6 - 2 × 10^?5 M for oxalate, citrate and tartrate, respectively. The relative standard deviations at the 1x10^?5 M concentration level were within the range 1.29 - 1.47 %. The sampling frequency was about 40 samples h^?1. The usefulness of the method was tested in the determination of oxalate in urine and spinach, of citrate in pharmaceuticals and soft drinks and of tartrate in pharmaceuticals. For the determination of oxalate in urine samples a prior separation of the analyte by precipitation with calcium chloride is recommended.     

Characterization and Electrocatalytic Property of Cobalt Hexacyanoferrate Film on Carbon Nanotubes Modified Gold Electrode

Abstract

Cobalt hexacyanoferrate (CoHCF) film was formed on multiwalled carbon nanotubes (MWNTs) modified gold electrode by electrodeposition from 0.5 M KCl solution containing CoCl₂ and K₃Fe(CN)₆. The electrochemical behavior and the electrocatalytic property of the modified electrode were investigated. Compared with CoHCF/gold electrode, the CoHCF/MWNTs/gold electrode exhibits greatly improved stability and enhanced electrocatalytic activity toward the oxidation of thiosulfate. A linear range from 5.0×10^?5 to 6.5×10^?3 M (r=0.9990) for thiosulfate detection at the CoHCF/MWNTs/gold electrode was obtained, with a detection limit of 2.0×10^?5 M (S/N=3).     

Indirect A.C. Oscillopolarographic Determination of Total Monomeric and Acid-Reactive Aluminum in Natural Waters by Using Pyrocatechol Violet

ABSTRACT

Indirect determination of total monomelic and acid-reactive aluminum in natural waters by a.c. oscillopolarography in the presence of pyrocatechol violet (PCV) is presented in this paper. In 0.5 mol 1^?1 NH₄Ac buffer solution (pH 6.4) containing l×lO^?3 mol 1^?1 PCV, PCV yields two incisions on the a.c oscillogram at the potentials of - 0.80 and - 1.20 V, respectively. The incision depth declines when adding aluminum in the solution. The decreases of incision depth (Ep = -1.20 V) has a linear relationship with increasing Al concentrations (4×10^?7 - 4×10^?6 mol 1^?). It is the basis for indirect quantitative analysis. The relative standard deviation is 8.3% for 1×10^?6 mol 1^?1 Al (n = 10) and the detection limit is 2 × 10^?7 mol 1^?1. The proposed method has been applied to determine total and acid-reactive Al in natural waters and the results are compared with Driscoll's 8-HQ-MIBK-GF/AAS and PCV colorimetric methods.