Simultaneous Analysis of Cimetidine and Ranitidine in Human Plasma by HPLC

Abstract

A rapid method for the simultaneous quantitation of the H₂-receptor antagonist drugs cimetidine and ranitidine in human plasma by isocratic ion-pair reverse-phase HPLC is described. The method involves a simple organic extraction step of the alkalinized plasma containing added internal standard followed by back extraction of the extract with dilute acetic acid and subsequent analysis of the aqueous acidic phase on a reverse-phase (C18) column. The eluting solvent was acetonitrile-water (20:80 v/v) containing 0.005 mole/litre octanesulphonic acid and was monitored at 229 nm. The run time for the assay was 12.5 minutes, with a detection limit for cimetidine of 50 ng/m1/(0.2 μmole/1) and that for ranitidine was 20 ng/ml (0.06 umole/1).     

A Fast,Simple Method for Analysis of Phenoxy Acid Salt and Ester Formulations by High Performance Liquid Chromatography

Abstract

Salt formulations of 2,4-D (2,4-dichlorophenoxyacetic acid), 2,4,5-T (2,4,5-trichlorophenoxyacetic acid) and dichlorprop [2-(2,4-dichlorophenoxy)propanoic acid] have been analysed by reversed-phase HPLC using a C18-column with 50:50 (v/v) acetonitrile/2% acetic acid as eluant. Internal and external standard HPLC methods are compared.

Ester formulations of 2,4-D and 2,4,5–T are analysed, without hydrolysis, on the same column using 60:40 (v/v) acetonitrile/2% acetic acid as eluant. The method has been used in this laboratory to determine free phenoxy acid in ester formulations, and for the identification of esters in mixed ester formulations.

The methods are fast and accurate, and offer some advantages over previously-described methods.     

A Rapid and Inexpensive Thin Layer Chromatographic Method for Quantitative Analysis of Bleomycin Complex

Abstract

A densitometric and a spectrophotometric method for rapid but accurate determination of different components of bleomycin injections has been described. The bleomycin components were separated by reversed phase thin layer chromatography on silanized silicagel plates using a mixture of aqueous ammonium nitrate (2.5%) : methanol :: 7 : 3 (v/v) as mobile phase. Assay was done at the absorption maxima of the components (291 nm) by in situ densitometry or by spectroscopy after extracting the drugs from the adsorbent with the mobile phase. Results obtained by both the methods agreed well with each other and with those obtained by an official HPLC method. The densitometric method described was highly suitable for routine quality control of bleomycines as a large number of samples could be analysed within a short time (68 samples/analyst/day).     

Thin Layer Chromatographic Method for Rapid Quantification and Identification of Trimethoprim and Sulfamethoxazole in Pharmaceutical Dosage Forms

Abstract

A densitometric and a spectrophotometric method for rapid but accurate determination of sulfamethoxazole (SMA) and trimethoprim (TMP) present in combined dosage forms were described. SMA and TMP were extracted with 90% acqueous methanol and the interfering and related contaminants were removed by thin layer chromatography (TLC) or high performance TLC (HPTLC) on silicagel plates using chloroform : isopropanol : diethylamine :: 10 : 6 : 1 (v/v) as mobile phase. Assay was done at the respective absorption maxima of the drugs by in situ densitometry and by spectroscopy after extracting the drugs from TLC plates with 90% acqueous ethanol. Results obtained by both the methods agreed well with those obtained by the method prescribed by the United States Pharmacopoeia XXI edition. Total time required for HPTLC and densitometric assay of 32 samples using 4 standards was 30 min. Probable source of errors in densitometric studies and their rectification was discussed.     

Stereochemie von Metallocenen, 40. Mitt.

Starting from optically active methylferrocene-- and--carboxylic acids (1 a and1 b) of known absolute configuration and enantiomeric purity about 15 chiral ferrocenes (of each isomeric series— and ) were obtained by suitable ligand transformations. Thereby (almost) all possible chiral combinations of the ligands CH₃, COOH (COO^–), COOCH₃, CN and NH₂ (NH₃ ⁺) were accessible which are necessary for a potential test of approximations of chirality functions for compounds with basic symmetry C_5v. The chiroptical properties of these disubstituted ferrocenes are recorded.Preliminary tests using a shortened Ansatz revealed large discrepancies between calculated () and found [M]_D-values. Possible reasons for this failure are discussed.

---

---

61. Mitt. über Ferrocenderivate

---

39. Mitt.:A. Meyer, H. Neudeck undK. Schlögl, Chem. Ber.110, 1403 (1977).

---

60. Mitt.:V. Rapi, K. Schlögl undB. Steinitz, J. Organometal. Chem.94, 87 (1975).     

Residues Analysis of Post-Harvest Imidazole Fungicides in Citrus Fruit by H PLC and GLC

Abstract

The determination of imazalil and prochloraz fungicide residues has been carried out by HPLC with an UV detector at 204 nm and by GLC with an electron capture detector (ECD).

In both cases fungicide residues were extracted with hexane/acetone (90:10, v/v) after pH adjustment and purified by a liquid-liquid partitioning process. When HPLC was used for prochloraz and imazalil analysis, it was necessary to eliminate the interfering substances with a further clean-up process. This was also required when samples with low residue levels were analyzed by GLC.

Recovery was always higher than 70%. The detection limit was 0.04 ppm for the HPLC method and 0.02 for the GLC method.

Imazalil and prochloraz residues in “Washington Navel” oranges and “Hernandina” clementine fruits, dipped in a 1000 ppm fungicide solution, are reported.     

TFAA-H3PO4 mediated rapid and single-step synthesis of mutual prodrugs of paracetamol and NSAIDs

Abstract

A clean and operationally simple method has been developed for the preparation of mutual prodrug using paracetamol and various nonsteroidal anti-inflammatory drugs. The methodology involves use of TFAA/H₃PO₄ in acetonitrile and a variety of mutual prodrugs has been prepared in good yields by using this single-step C–O bond forming reaction.

     

Separation and Determination of Bile Acids in Human Bile by High-Performance Liquid Chromatography

Abstract

A method for simultaneous determination of major bile acids in human bile is described. The unconjugated, glycine- and taurine-conjugated bile acids are extracted with Sep-pak C¹⁸ and separated into groups by ion-exchange chromatography on a lipophilic gel. Subsequently, resolution of each group into ursodeoxycholate, cholate, chenodeoxycholate, deoxycholate and lithocholate is attained into two stages by high-performance liquid chromatography on a Radial-PAK A column. First, 0.3% ammonium phosphate (pH 7.7)/acetonitrile (19:8, v/v) is used for separation of the latter three as a mobile phase. Ursodeoxycholate and cholate are efficiently separated in 0.3% ammonium phosphate (pH 7.7)/acetonitrile (23:8, v/v). The present method is applicable to quantitation of bile acids in human bile with satisfactory accuracy and precision.     

Simultaneous Identification and Determination of Several Barbiturates in Plasma by Reverse-Phase HPLC

Abstract

A Reverse-Phase HPLC method is described for the simultaneous identification and determination of 5 barbiturates: Allobarbital, Phencbarbital, Butabarbi -tal, Butalbital and Pentobarbital. Barbital is used as internal standard. The mobile phase is Milli Q Water/ Acetonitrile/ 1.75 M Phosphoric Acid (738:200:2, v/v/v) at a flow rate of 0.8 mL/min and UV detection is carried out at 195 nm. The single extraction procedure requires only small samples and analysis is quick.     

Synchronized stability indicating RP-LC methods for determination of metolazone with losartan potassium or spironolactone in presence of their degradation products

Abstract

Two precise and selective stability-indicating RP-LC methods have been developed and validated for simultaneous determination of metolazone in its binary mixture with losartan potassium (method 1) and spironolactone (method 2) in the presence of their degradation products. For method 1, the chromatographic separation was achieved on Kromasil C₁₈ column, the mobile phase consisted of a mixture of 0.1% ortho-phosphoric acid in acetonitrile and 0.1% ortho-phosphoric acid in water (28:72, v/v) pumped at flow rate 2?mL/min and UV detection at 235?nm. Linearity was determined over the concentration range of 2–16µg/mL for metolazone and 40–320µg/mL for losartan potassium. For method 2, chromatographic separation of metolazone and spironolactone was achieved on a Symmetry C₈ column using a mobile phase that consisted of acetonitrile, methanol, and 0.1% ortho-phosphoric in water in gradient mode pumped at a flow rate 1.5?mL/min with programed wavelength detection. Linearity was determined over the concentration range of 2–16µg/mL for metolazone and 20–160µg/mL for spironolactone. The suggested methods were proved to be highly selective, precise and accurate for simultaneous determination of the cited drugs in their combined pharmaceutical dosage form in the presence of their degradation products. The proposed methods were validated in compliance with ICH guidelines.

1. Highlights

2. Synchronized determination of metolazone and co-formulated drugs in presence of their degradation products.

3. Act as a method for screening of metolazone and co-formulated drugs in quality control laboratories.

4. Validation of suggested methods according to ICH guidelines.

5. The pathway of degradation of metolazone under different stress conditions was proposed.

     

Determination of Selected Quinolones and Fluoroquinolones by Use of TLC

Abstract

There are many different methods of quinolones determination. The most often used method of quinolones analysis is liquid chromatography. In this work some selected quinolones (cinoxacin, pipemidic acid) and fluoroquinolones (ofloxacin, pefloxacin) were separated with thin-layer chromatography (TLC). The two different mobile phases were used as follows: buffer solution (pH = 5.5)-methanol, 40:10 (v/v) and acetonitrile-water-acetic acid, 6:40:4 (v/v/v), respectively, for quinolones and fluoroquinolones. The following chromatographic parameters were calculated for these separations: R_F, ?R_F, R_M, and R_S. The possibility of qualitative determination of cinoxacin, pipemidic acid, ofloxacin, and pefloxacin using TLC was shown.     

The Separation of Conjugated and Unconjugated Bilirubin in Bile by High-Performance Liquid Chromatography

Abstract

A fast and simple method was developed for the separation of unconjugated bilirubin and its mono- and di-glucuronide conjugates from bile by high-performance liquid chromatography (HPLC). Unconjugated bilirubin was separated on a reversed-phase column using acetonitrile-water (70:30 v/v) as the mobile phase, while the conjugates were separated on a μ-Bondapak-carbohydrate column employing acetonitrile-water (90:10 v/v) as the eluent. The application of this method was demonstrated by the analysis of the bile pigments in rat bile.     

Copper (I) Iodide-Catalyzed Solvent-Free Synthesis of α-Aminophosphonates

Abstract

A method for the synthesis of α-aminophosphonates through the three-component coupling reaction of aldehydes, amines, and diisopropyl phosphite using copper (I) iodide salt catalyst is demonstrated, The reaction is highly efficient, economic, and also environment friendly.

[Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements for the following free supplemental resource: Table S1, Figures S1–S9.]

GRAPHICAL ABSTRACT      

Simultaneous Determination of Methadone,Heroin, Cocaine and their Metabolites in Urine by GC‐MS

Abstract

A gas chromatographic‐mass spectrometric (GC‐MS) method for the determination of methadone, heroin, cocaine, and their metabolites in urine using Selected Ion Monitoring (SIM) was developed. Following a liquid‐liquid extraction with Toxitubes A^® and using their deuterated analogs as internal standards, the analytes were derivatized with 99:1 (v/v) N,O‐bis‐trimethylsilyl‐trifluoroacetamide/trimethylchlorosilane and injected by hand, in the splitless mode, at 240°C and a purging time of 0.75 min. The mass selective detector was kept at 300°C and molecules were ionized in the electron impact mode, using an energy of 70 eV. The detector response was linear for all drugs studied over the range 50–1000 ng/mL.     

Synthesis and In-Vitro Antimicrobial Activity of Novel Aminophosphinic Acids Containing Cyclobutane and 1,3-Thiazole

Abstract

The compounds {[4-(3-methyl-3-aryl(mesityl-phenyl-tetralino)cyclobutyl)-1,3-thiazol-2-yl]amino}(aryl)methyl-phosphinic acids 2a–l were prepared by condensation of 2-amino-4-(3-aryl(mesityl-phenyl-tetralino)-3-methylcyclobutyl) thiazoles 1a–c with various aromatic aldehydes and hypophosphorous acid through a one-pot reaction. The characterizations of these compounds were obtained by elemental analyses, infrared (IR) spectra, and ¹H, ¹³C, and ³¹P NMR (nuclear magnetic resonance) techniques. The synthesized compounds were tested in vitro against one Gram-positive and two Gram-negative bacterial strains, one mycobacterial strain, and a fungus Candida albicans. Compound 2f showed significant activity against Staphylococcus aureus, whereas the others had no remarkable activity on this strain. Compound 2g was found to be more active than the others against Mycobacterium fortuitum at an MIC (minimum inhibitory concentration) value of 32 μg/mL. The antibacterial and antifungal activities of 2a–l were also compared with various standard drugs.

[Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements for the following free supplemental resource: Biological Activities. Table S1. Figures S1–S6.]

GRAPHICAL ABSTRACT      

Konstitution und Dipolmomente von α- und β-Dijodcymantren

Zusammenfassung Die neben dem Monosubstitutionsprodukt bei der direkten Mercurierung von Cymantren entstehenden Di-(chlormercuri)-cymantrene lassen sich glatt zu den entsprechenden Dijodverbindungen umsetzen. Die Konstitutionszuordnung der Dijodcymantrene (- und -Isomeren) erfolgte nach Auftrennung mit Hilfe der an1, 2 und3 gemessenen Dipolmomente: Dem höher schmelzenden Isomeren kommt die -Konstitution zu. DieIR- undNMR-Daten der genannten Verbindungen werden mitgeteilt.

---

Di-(chlormercuri)-cymantrenes obtained along with monosubstituted product were converted to the di-iodocymantrenes and the latter separated into the - and -isomers. Based on measurement of the dipol moments of1, 2, and3 the -structure was attributed to the higher melting isomer.IR- andNMR-data are presented.

---

---

Unserem verehrten Lehrer, Herrn Prof. Dr.J. W. Breitenbach, zum 60. Geburtstag gewidmet.

---

Cymantren = Cyclopentadienyl-mangan-tricarbonyl.

---

4. Mitt.:H. Gowal undK. Schlögl, Mh. Chem.99, 972 (1968).     

Semipreparative High-Performance Liquid Chromatographic Separation of Phosphatidylcholine Molecular Species From Soybean Leaves

Abstract

An improved high-performance liquid chromatographic (HPLC) method using UV detection at 205 nm is described for the semipreparative separation of the molecular species of phosphatidylcholine (PC) from soybean leaves. the separations of PC molecular species are achieved isocratically within ca. 75 min on C 18 reversed-phase column using the mobile phase, methanol:0.1 M ammonium acetate, pH 7.4 (95:5, v/v). Five molecular species for soybean PC are identified as 18:3/18:3, 18:2/18:3, 18:2/18:2, 16:0/18:3 and 16:0/18:2.     

Simultaneous Determination of Tinidazole and Furazolidone in Suspension by HPTLC and HPLC

Abstract

High performance thin layer chromatographic (HPTLC) and high performance liquid chromatographic (HPLC) methods were developed for the simultaneous determination of Tinidazole and Furazolidone in suspension.

In the HPTLC method the separation of Tinidazole and Furazolidone was carried out on silica gel 60F₂₅₄ HPTLC glass plate using chloroform:methanol:ammonia (9:1:0.1 v/v) as a mobile phase. Rf values obtained were 0.63 and 0.79 for Furazolidone and Tinidazole respectively. Densitometric evaluation was done at 335 nm. Linearity was obtained within the concentration range 10–50 μg/ml and 3.5–17.5 μg/ml for Tinidazole and Furazolidone respectively.

The second method is based on high performance liquid chromatography on a reversed phase column (μ Bondapak C₁₈) using a mobile phase comprised of water: acetonitrile: triethylamine (80:20:0.1 v/v) adjusted to pH = 3.0 with dil. phosphoric acid. Retention times were 5.24 and 7.82 min for Tinidazole and Furazolidone respectively at a flow rate of 1.5 ml/min. Detection was done at 335 nm. Linearity was obtained within the concentration range 30–180 μg/ml and 10.5–63 μg/ml for Tinidazole and Furazolidone resp.