Copper-Catalyzed Oxygenative Skeletal Rearrangement of Tetrahydro-β-carbolines Using H2O and O2 as Oxygen Sources

Herein, we report an unprecedented skeletal rearrangement reaction of tetrahydro-β-carbolines enabled by copper-catalyzed single-electron oxidative oxygenation, in which H₂O and O₂ act as oxygen sources to generate a unique 2-hydroxyl-3-peroxide indoline intermediate. The synthetic reactivity of 2-hydroxyl-3-peroxide indoline species was demonstrated by a unique multi-step bond cleavage and formation cascade. Using a readily available copper catalyst under open-air conditions, highly important yet synthetically difficult spiro[pyrrolidone-(3,1-benzoxazine)] products were obtained in a single operation. The synthetic utility of this methodology is demonstrated by the efficient synthesis of the natural products donaxanine and chimonamidine, as well as the 3-hydroxyl-pyrroloindoline scaffold, in just one or two steps.     

Gas-phase solvation of Cl− with H2O,CH3OH,C2H5OH,i-C3H7OH,n-C3H7OH,and t-C4H9OH

The gas-phase clustering reactions Cl⁻ (ROH)n−1 + ROH ⇄ Cl⁻ (ROH)_n with n ⩽ 11 for ROH = H₂O, CH₃OH, C₂H₅OH, i-C₃H₇OH, n-C₃H₇OH, and t-C₄H₉OH were measured using a high-pressure mass spectrometer. It seems likely that for CH₃OH and C₂H₅OH, six ligands complete the shell structure and that ligands with n ⩾ 7 belong to the outer shell. The bond energies D(ROH---Cl⁻) increase in the order H₂O < CH₃OH < C₂H₅OH < i-C₃H₇OH < t-C₄H₉OH < n-C₃H₇OH. The observed strong bond of n-C₃H₇OH---Cl⁻ may be due to the fact that both the acidic hydrogen atoms in the −OH and terminal −CH₃ of n-C₃H₇OH interact with Cl⁻ with the most favorable configuration. For Cl⁻ switching reactions, Cl⁻ (H₂O)_n + (ROH)_n ⇄ Cl⁻ (ROH)_n + (H₂O)_n, the ΔG⁰_n values converge to the values of free energies of transfer of Cl⁻ from water to ROH solvent ( = ΔG⁰_n with n → ∞) with n ≈ 7. The observed convergence of ΔG⁰_n is due to compensation of changes in enthalpy and entropy, i.e. both ΔH⁰_n and TΔS⁰_n show increasing divergence from the values of enthalpies and entropies of transfer of Cl⁻ from water to ROH solvent, respectively, with n = 1 → 7. This is due to the stronger interactions of ROH with Cl⁻ than that of H₂O in the inner shell of Cl⁻ (ROH)_n at the expense of the less favorable entropy changes (less freedom of motion for ligands in the inner shell).     

Solubility of Oxygen in Some 1-1, 2-1, 1-2, and 2-2 Electrolytes as a Function of Concentration at 25°C

The solubility of oxygen has been measured in a number of electrolytes [(LiCl, KCl, RbCl, CsCl, NaF, NaBr, NaI, NaNO₃, KBr, KI, KNO₃, CaCl₂, SrCl₂, BaCl₂, Li₂SO₄, K₂SO₄, Mn(NO₃)₃)] as a function of concentration at 25°C. The solubilities, mol (kg-H₂O)^–1, have been fitted to a function of the molality m (standard deviation < 3mol-kg^–1)

Efficient and selective reduction of α-pinene to cis-pinane by NaBH4 using NiCl2•6H2O/PEG-800/ethanol as the catalytic system

The reduction of α-pinene by NaBH₄ was achieved using NiCl₂?6H₂O in PEG-800/ethanol system under room temperature. Under the optimized conditions, the conversion of α-pinene and the selectivity of cis-pinane reached 97% and 98%, respectively. On the basis of TEM and a series of poisoning experiments, the nature of the active catalytic species for the reaction was discussed.     

Syntheses, structure, and luminescent properties of novel hydrated rare earth borates Ln2B6O10OH4•H2O (Ln = Pr, Nd, Sm, Eu, Gd, Dy, Ho, and Y)

Ln(2)B(6)O(10)(OH)(4)?H(2)O (Ln = Pr, Nd, Sm-Gd, Dy, Ho, and Y), a new series of hydrated rare earth borates, have been synthesized under hydrothermal conditions. A single crystal of Nd analogue was used for the structure determination by X-ray diffraction. It crystallizes in the monoclinic space group C2/c with lattice constants a = 21.756(4), b = 4.3671(9), c = 12.192(2) ?, and β = 108.29(3)°. The other compounds are isostructural to Nd(2)B(6)O(10)(OH)(4)?H(2)O. The fundamental building block (FBB) of the polyborate anion in this structure is a three-membered ring [B(3)O(6)(OH)(2)](5-). The FBBs are connected by sharing oxygen atoms forming an infinite [B(3)O(5)(OH)(2)](3-) chain, and the chains are linked by hydrogen bonds, establishing a two-dimensional (2-D) [B(6)O(10)(OH)(4)?H(2)O](6-) layer. The 2-D borate layers are thus interconnected by Ln(3+) ions to form the complex three-dimensional structure. Ln(2)B(6)O(10)(OH)(4)?H(2)O dehydrates stepwise, giving rise to two new intermediate compounds Ln(2)B(6)O(10)(OH)(4) and Ln(2)B(6)O(11)(OH)(2). The investigation on the luminescent properties of Gd(2-2x)Eu(2x)B(6)O(10)(OH)(4)?H(2)O (x = 0.01-1.00) shows a high efficiency of Eu(3+) f-f transitions and the existence of the energy transfer process from Gd(3+) to Eu(3+). Eu(2)B(6)O(10)(OH)(4)?H(2)O and its two dehydrated products, Eu(2)B(6)O(10)(OH)(4) and Eu(2)B(6)O(11)(OH)(2), present the strongest emission peak at 620 nm ((5)D(0) → (7)F(2) transition), which may be potential red phosphors.     

Synthesis,Structure, and Properties of Cesium Polyuranate [Cs2(H2O)3][(UO2)6O3(OH)8]·2H2O

Russian Journal of General Chemistry - Cesium uranate [Cs2(Н2О)3][(UO2)6O3(OH)8]·2H2O was obtained by reacting hydrated uranium(VI) oxide UO3·2.25H2O with a cesium nitrate...     

Synthesis, Characterization and Structure of the Dimmer Complex [Ni(TSSB)(phen)H2O]·C2H5OH·0.5H2O

The title complex [Ni(TSSB)(phen)H2O](C2H5OH(0.5H2O (C23H26N3NiO6.5S, TSSB = taurine salicylaldehyde Schiff base, phen = 1,10-phenanthroline) has been synthesized by the reaction of taurine salicylaldehyde Schiff base (TSSB), 1,10-phenanthroline and nickel acetate in water-ethanol. Its single-crystal structure was determined by X-ray diffraction method. The crystal belongs to triclinic, space group P with a = 1.0562(2), b = 1.1604(2), c = 2.1170(3) nm, α = 103.257(3), β = 96.958(4), γ = 105.179(3)°, Mr = 539.24, V = 2.3917(6) nm3, Z = 4, Dc = 1.498 g/cm3, μ = 0.945 mm-1 and F(000) = 1124. The compound is a one-dimensional network, infinitely extending with hydrogen bonds. The Ni(Ⅱ) is 6-coordinated by one nitrogen and two oxygen atoms from taurine salicylaldehyde Schiff base, two nitrogen from 1,10-phenanthroline and one oxygen from water to form a distorted octahedronal coordination geometry.     

Determination of kinetic triplet of the synthesized Ni3(PO4)2·8H2O by non-isothermal and isothermal kinetic methods

The nickel phosphate octahydrate (Ni₃(PO₄)₂·8H₂O) was synthesized by a simple procedure and characterized by FTIR, TG/DTG/DTA, AAS, and XRD techniques. The morphologies of the title compound and its decomposition product were studied by the SEM method. The dehydration process of the synthesized hydrate occurred in one step over the temperature range of 120–250 °C, and the thermal decomposition product at 800 °C was found to be Ni₃(PO₄)₂. The kinetic parameters (E and A) of this step were calculated using the Ozawa–Flynn–Wall and Kissinger–Akahira–Sunose methods. The iterative methods of both equations were carried out to determine the exact values of E, which confirm the single-step mechanism of the dehydration process. The non-isothermal kinetic method was used to determine the mechanism function of the dehydration, which indicates the contracting disk mechanism of R₁ model as the most probable mechanism function and agrees well with the isothermal data. Besides, the isokinetic temperature value (T _i) was calculated from the spectroscopic data. The thermodynamic functions of the activated complex (ΔS ^≠, ΔH ^≠, and ΔG ^≠) of the dehydration process were calculated using the activated complex theory of Eyring. The kinetic parameters and thermodynamic functions of the activated complex for the dehydration process of Ni₃(PO₄)₂·8H₂O are reported for the first time.     

Theoretical study of aluminide clusters Al13X, Al13X−, and Al13X 2 − (X=H, Hal, OH, NH2, CH3, and C6H5)

The structural, electronic, energy, and vibrational characteristics of the Al₁₃X^? and Al₁₃X ₂ ^? clusters, with an aluminum-centered (Al_c) icosahedral cage Al₁₃ and with one or two outer-sphere ligands X=H, F, Cl, Br, OH, NH₂, CH₃, C₆H₅, have been calculated within the B3LYP approximation of the density functional theory using the 6-31G* and 6-311+G* basis sets. In all Al₁₃X^? radicals, the unpaired electron is localized at the cage atom Al* located opposite the Al-X bond. This Al* atom is the most favorable site for attaching the second X ligand of any nature (trans-addition rule). According to the previously suggested molecular model of the valence state of the [Al ₁₃ ^? ] “superatom,” the calculated energies D ₁(Al ₁₃ ^? -X) of addition of the first ligand to the Al ₁₃ ^? anion are about 1 eV lower than the corresponding energies of addition of the second ligand D ₂(XAl ₁₃ ^? -X). The structure of the Al₁₃ cage depends on the nature of the nature of the substituent X and can radically change in going from anions to their neutral congeners. In the lowest-lying Al₁₃X isomer with electronegative substituents X (Hal, OH, NH₂, CH₃, etc.), the aluminum cage has a marquee structure (1, symmetry C _s) with a hexagonal base and a pentagonal “roof.” For Al₁₃X analogues with electropositive ligands X (Al, Li, Na), a tridentate isomer (T, C _3v ) with the X substituent coordinated to a face of the Al₁₃ icosahedron is preferable. In the case of moderately electronegative X ligands (of the H type), the marquee (1) and icosahedral (T) isomers are close in energy. The stretching vibration frequencies of isomers 1 and T differ significantly in magnitude and intensity so that vibrational spectroscopy methods can be especially applicable to their experimental identification.     

Iodination of B12H11OC(O)CH2–3, B12H11OH2–, and B12H11SCN2–

Reactions of iodination of monosubstituted derivatives of B₁₂H₁₁X^2–anion (X = OC(O)CH₃, OH, SCN) were studied. The reactions were shown to proceed smoothly to give B₁₂H₁₀(OC(O)CH₃)I^2–((carboxy)(iodo)[decahydro[I _h1551-²⁰-closo]dodecaborate(2–)] anion), B₁₂H₁₀(OH)I^2–((hydroxo)(iodo)[decahydro[I _h1551-²⁰-closo]dodecaborate(2–)] anion), and B₁₂H₁₀(SCN)I^2–((thiocyanato)(iodo)[decahydro[I _h1551-²⁰-closo]dodecaborate(2–)] anion) in high yields, irrespective of the solvent used (benzene, H₂O–ROH, where R = C₂H₅, CH₂CH₂CH₃).¹     

Syntheses and characterization of Pb(trz) n X2 (X = CH3COO−, NCS−, and n = 1, 2) complexes,and crystal structure of [Pb(trz)2(MeOH)](ClO4)2·H2O

Lead(II) complexes with 2,4,6-tris(2-pyridyl)-1,3,5-triazine (trz) have been synthesized using a direct synthetic method and characterized by IR and ²⁰⁷Pb NMR spectroscopy and CHN elemental analysis. The structure of [Pb(trz)₂(MeOH)](ClO₄)₂·H₂O was confirmed by X-ray crystallography. Single-crystal X-ray data for [Pb(trz)₂(MeOH)](ClO₄)₂·H₂O show the complex to be monomeric with the Pb having an unsymmetrical seven-coordinate geometry, coordinated by six nitrogen atoms of the trz ligands and one oxygen atom of MeOH. The arrangement of the ligands in the [Pb(trz)₂(MeOH)](ClO₄)₂·H₂O complex exhibits a coordination gap around the Pb(II), occupied possibly by a stereoactive lone pair of electrons on lead(II); the coordination around the lead atoms is hemidirected.     

Studies on Kinetic Properties of Active Oxygen on the Surfaces of V_2O_5/SiO_2, V_2O_5-MoO_3/SiO_2 and V_2O5-P_2O5/SiO_2 Catalysts

Applying the TPD-MS with a high sensitivity of determination, the TPD spectrum of surface oxygen of V2O5/SiO2, V2O5-MoO3/SiO2 and V2O6-P2O5/SiO2 catalysts was obtained. The surface oxygen of these catalysts can be divided into three groups according to the desorption temperature. O2- desorbs mainly from 373K. to 423K, O- from 673K to 873K and O2- at above 873K. The activation energy and frequency factor of all the three kinds of oxygen species were calculated. Based on these results, the mechanism of oxygen desorption and the influence of P2O5 and MoO3 on the properties of oxygen supply of V2O5/SiO2 catalst were investigated. MoO3 and a small amount of P2Os increase the number of supplying oxygen and increase the activity of O- species. A large amount of P2O5 increases the number of supplying oxygen and restrains the activity of O- species.     

Initial distribution of vibration of the OH radicals produced in the H + O3 → OH(X2Π1/2,3/2) + O2 reaction. Chemiluminescence by a crossed beam technique

The chemiluminescence in the H + O₃ → OH(X²Π_1/2,3/2) + O₂ reaction was observed using a crossed beam technique. The initial population of the OH radicals in the vibrational state v (4 ⩽ v ⩽ 9) were found to be N(9) = 1.0, N(8) = 0.95 ± 0.1, N(7) = 0.9 ± 0.2, N(6) = 0.2 ± 0.1 and N(5) = N(4) = 0.2 ± 0.2. The total cross section of the formation of OH(4 ⩽ v ⩽ 9) was estimated to be of the order of 10⁻² nm². No chemiluminescence was observed in the reaction D + O₃ → OD(X²Π_1/2,3/2) + O₂ under the present experimental conditions.     

Synthesis and characterization of hybrid organic-inorganic, dimeric tungstoantimonate, {[Cu(En)2(H2O)]2[Cu4Na2(H2O)2(OH)2](α-SbW9O33)2}6?1

The copper-substituted tungstoantimonate(III) [Cu(En)₂(H₂O)₂]₂[Cu(En)₂(H₂O)]{[Cu(En)₂ (H₂O)]₂[Cu₄Na₂(H₂O)₂(OH)₂][(??-SbW₉O₃₃)₂]} · 3H₂O (I) (En = ethylenediamine) has been synthesized and characterized by IR spectrum, elemental analysis, and XPS. X-ray single-crystal analyses were carried out on I, which crystallizes in the triclinic system, space group P-1, with a = 13.071(2) ?, b = 14.434(2) ?, c = 15.729(2) ?, ?? = 83.004(3)°, ?? = 71.237(2)°, ?? = 74.787(2)°, and Z = 1. The title polyanion consists of two [??-SbW₉O₃₃]^9? trivacant moieties joined together by an annular [Cu₄Na₂(H₂O)₂(OH)₂]^8? unit leading to a sandwich-type structural framework. The central belt of I contains two crystallography unique Cu²⁺ and four disordered Cu²⁺/Na⁺ ions which reduce the symmetry of the polyanion to C _2??.     

Study of H2O and HOCH2CH2OH Adsorption on the Relaxation Surface of β-Si3N4(0001) by Density Functional Theory

Density functional theory (DFT) B3LYP method is used to theoretically investigate the adsorption conformations of H2O and glycol on the relaxation surface of β-Si3N4(0001) with cluster models. For H2O, the most stable structure is that adsorbed through the H atom lying above a N(3) site of the relaxation surface of β-Si3N4(0001); while for glycol, it is the one adsorbed via the H atom lying above the center of Si(2) and N(3) of the same relaxation surface. The adsorption energy, adsorption bond and transfer electrons of the two adsorbed substances prove that glycol is easy to be adsorbed on the relaxation surface of β-Si3N4(0001).     

Study of H2O and HOCH2CH2OH Adsorption on the Relaxation Surface of β-Si3N4（0001） by Density Functional Theory

Density functional theory （DFT） B3LYP method is used to theoretically investigate the adsorption conformations of H2O and glycol on the relaxation surface of β-Si3N4（0001） with cluster models. For H2O, the most stable structure is that adsorbed through the H atom lying above a N（3） site of the relaxation surface of β-Si3N4（0001）; while for glycol, it is the one adsorbed via the H atom lying above the center of Si（2） and N（3） of the same relaxation surface. The adsorption energy, adsorption bond and transfer electrons of the two adsorbed substances prove that glycol is easy to be adsorbed on the relaxation surface of β-Si3N4（0001）.     

Structural, spectroscopic, electrochemical and computational studies of C,C′-diaryl-ortho-carboranes, 1-(4-XC6H4)-2-Ph-1,2-C2B10H10 (X = H, F, OMe, NMe2, NH2, OH and O−)

The influence of aryl ring substituents X (F, OMe, NMe₂, NH₂, OH and O⁻) on the physical and electronic structure of the ortho-carborane cage in a series of C,C′-diaryl-ortho-carboranes, 1-(4-XC₆H₄)-2-Ph-1,2-C₂B₁₀H₁₀ has been investigated by crystallographic, spectroscopic [nuclear magnetic resonance (NMR), UV–vis], electrochemical and computational methods. The cage C1–C2 bond lengths in this carborane series show small variations with the electron-donating strength of the substituent X, but there is no evidence of a fully evolved quinoid form within the aryl substituents in the ground state. In the ¹¹B and ¹³C NMR spectra, the ‘antipodal’ shift at B12, and the C1 shift correlates with the Hammett σ _p value of the substituent X. The UV–visible absorption spectra of the cluster compounds show marked differences when compared with the spectra of the analogous substituted benzenes. These spectroscopic differences are attributed to variation in contributions from the cage orbitals to the unoccupied/virtual orbitals involved in the transitions responsible for the observed absorption bands. Electrochemical studies (cyclic and square-wave voltammetry) carried out on the diarylcarborane series reveal that one-electron reduction takes place at the cage in every case with the voltage required for reduction of the cage influenced by the electron-donating strength of the substituent X, affording a series of carborane radicals with formal [2n + 3] electron counts. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Fluorescence Quenching of Anthracene by N,N－Diethylaniline and Phenothiazine in Triton X－ 100／n－C10H21OH／H2O Microemulsion

The photo-induced electron transfer reactions of anthracene with N, N-diethylaniline (DEA) and phe-not hiazine(PTZ) occur in the membrane phase of a Triton X-100/n-C10H21OH (1-decanol)/H2O microemul-sion. DEA and PTZ exist in the membrane phase of the microemulsion. Anthracene exists in the oil continu-ous phase of the W/O microemulsion and in the oil core and membrane phase of the O/W microemulsion.     

Assessment of multicoefficient correlation methods, second-order Møller-Plesset perturbation theory, and density functional theory for H3O(+)(H2O)n (n = 1-5) and OH(-)(H2O)n (n = 1-4)

We have assessed the ability of 52 methods including 15 multicoefficient correlation methods (MCCMs), two complete basis set (CBS) methods, second-order M?ller-Plesset perturbation theory (MP2) with 5 basis sets, the popular B3LYP hybrid functional with 6 basis sets, and 24 combinations of local density functional and basis set to accurately reproduce reaction energies obtained at the Weizmann-1 level of theory for hydronium, hydroxide, and pure water clusters. The three best methods overall are BMC-CCSD, G3SX(MP3), and M06-L/aug-cc-pVTZ. If only microsolvated ion data is included, M06-L/aug-cc-pVTZ is the best method; it has errors only half as large as the other density functionals. The deviations between the three best performing methods are larger for the larger hydronium- and hydroxide-containing clusters, despite a decrease in the average reaction energy, making it impossible to determine which of the three methods is overall the best, so they might be ranked in order of increasing cost, with BMC-CCSD least expensive, followed by M06-L/aug-cc-pVTZ. However, the cost for M06-L will increase more slowly as cluster size increases. This study shows that the M06-L functional is very promising for condensed-phase simulations of the transport of hydronium and hydroxide ions in aqueous solution.     

OH stretching force constants in complexes of water with F−, Cl−, Li+ ions and LiF,LiCl ion pairs by 6-31G ab initio MO calculations

Ab initio MO calculations using 6-31G and 6-31 + G (for complexes with F⁻ and LiF) basis sets have been carried out for complexes of H₂O (monomer and dimer) with F⁻, Cl⁻, Li⁺ ions as well as with LiF and LiCl ion pairs for the evaluation of the OH stretching force constants. The changes in force constants are discussed in terms of molecular interactions, cooperativity effect and interionic electrostatic interactions. It is noticed that the cooperativity effect also operates through ionic bonds in symmetrically hydrated ion pairs and that OH stretching force constants are found to increase in the case of solvent bound ion pairs and symmetrically hydrated halide ions showing anticooperativity effect.