Spectrophotometric Studies of Cerium(III) and Thorium(IV) Chelates of Diethylenetriaminepentaacetic Acid (DTPA)

The interaction between diethylenetriaminepentaacetic acid (DTPA or H_sZ) and Ce(III) and Th(IV) ions has been investigated spectrophotometrically in aqueous solution at an ionic strength of 0.1 and for various temperatures. It has been found that the Ce(III)-DTPA chelate (1:1) exhibited a characteristic absorption maximum at 297 nm, and the optimum pH range is between 3.4 to 4.4. The absorption of Ce(III)-DTPA chelate is considerably diminished by adding small amounts of Th(IV) ions. This phenomenon was used to evaluate the formation constant of Th(IV)-DTPA chelate (1:1). The formation constants and the thermodynamic properties characterizing the formation of the chelates have been calculated at 25°. The results are as follows:      

Potentiometric and UV-Visible Spectrophotometric Studies of the Stability of Thorium(IV) Complexes with (o-Hydroxyphenyl) Mono- and Di-Methylenephosphonic Acids

Protometric studies were performed in aqueous solutions at 25^C and 0.1 ,mol.dm⁻³ ionic strength (NaClO₄) to determine the complexing abilities of eight (o-hydroxy-phenyl) mono- and di-methylenephosphonic acids (differently substituted by chromophoric or auxochromic groups) towards thorium(IV). The number, the nature of the species present in solution, their overall stability constants over a broad acidity range and their individual electronic spectra, as resolved by computation, have been determined by potentiometry and UV-visible spectrophotometry.The formation of 1:1 species, partially protonated MLH_x and totally deprotonated [ML], as well as hydroxo species -- mononuclear ML(OH)_x and dinuclear M₂L(OH) _x is reported with thorium(IV). The results show that the complexing power, which is not very different in the lanthanide series, is much higher for thorium(IV). The ratio Th⁴⁺/Eu³⁺ reaches eight log₁₀ units with some of the ligands.     

Simultaneous mixture analysis by using non-linear spectrophotometric data and linear iterative target transformation factor analysis

Non-linear absorption spectral data obtained from ternary mixtures of analytes are analyzed by using a linear model, iterative target transformation factor analysis (ITTFA). The use of transformed original variables is used to correct non-linearities in the original data. Absorbance below a certain limit (k) is described as linear and above this limit as non-linear. The extension of the regressor variables is the squared absorbances above the linear range. The variation of the prediction error as a function of the number of the factors and the k-values were considered and the minimum prediction error was evaluated for reaching to optimum. Except the natural non-negativity constraint the correlation constraint also is used on concentration vector in each iteration of ITTFA algorithm. The reliability of the method is evaluated using model data for ternary mixtures by spectral overlapping and different degrees of non-linearity. Simultaneous spectrophotometric determination of Eu³⁺, UO₂²⁺ and Th⁴⁺ with arsenazo III as chromogenic reagent is used as experimental model systems with non-linearity behavior of Eu³⁺and UO₂²⁺ components. The application to both synthetic and real data sets with different degrees of non-linearity demonstrate the ability of the proposed methodology to obtain better results than original data and ITTFA. The relative standard errors of prediction for proposed method in comparison with using the PLS calibration on original and extended data are nearly smaller.     

Hydrolysis of dioxouranium(VI): a calorimetric study in NaClaq and NaClO4 aq, at 25 °C

We report the results of a calorimetric study on the hydrolysis of UO₂²⁺ in different ionic media (NaClO_4 aq, NaCl_aq) at 25 °C. Experiments in NaCl were performed at different ionic strength, at I≤1 mol l⁻¹. The species considered in both ionic media were UO₂(OH)⁺, (UO₂)₂(OH)₂²⁺ and (UO₂)₃(OH)₅⁺, and in addition (UO₂)₃(OH)₄²⁺ and (UO₂)₃(OH)₇⁻ in NaCl_aq. The dependence on ionic strength of enthalpy changes in NaCl_aq was expressed by the simple linear equation ΔH_pq=ΔH°_pq+aI^1/2 (a, empirical parameter). Comparison with literature findings is given and some recommended values are reported.     

Studies on the reaction of salicylidenebenzoic-hydrazide (SBH) with Ce3+, Th4+ and UO2 2+

The stoichiometry and structure of salicylidenebenzoic-hydrazine (SBH) chelates with UO₂(II), Ce(III) and Th(IV) in buffer-ethanol mixtures and in pure ethanol is studied applying conductometric titration, visible spectrophotometry and ir-spectrophotometry. The ir-spectra revealed that coordination takes place through the C=O and C=N groups.Deceased December 1977.     

OXAZOLIDONES ET DIOXOLONNES DU GERMANIUM (IV) ET (II) DU PHOSPHORE (III), DE L'ARSENIC (III) ET DU SOUFRE

Abstract

Diffèrents modes de synthèse d'oxazolidones 1.2.4-7 et de dioxolonnes 8-11 germaniées sont décrites.

La stabilité thermique de germadioxolonnes a été étudiée. La décomposition procède d'un méchanisme du type (2 + 2 + 1), avec ouverture du cycle et formation de germylène.

La réactivité chimique des oxazolidones et dioxolonnes germaniées a été étudité. Des réactions d'échange avec des dérives organominéraux dichlorés conduit facilement et avec de bons rendements aux derives isologues, phosphorés(III). arseniés(III), soufrés. ou germaniés(IV). La réaction d'échange entre une dioxolonne germaniée et le dichlorogermylène nous a permis d'obtenir un nouveau germylène fonctionnel cyclique stable 20 qui a été caractérisé par spectrographie (RMN ¹H. masse).

Different synthetic ways for germaoxazolidones 1.2.4-7 or dioxolonnes 8-11 have been described.

The thermal stability of germadioxolonnes has been studied. Decomposition occurs by a [2 + 2 + 1] ring opening with formation of germylene.

The chemical reactivity of germaoxazolidones or dioxolonnes has been studied. Exchange reactions with dihalogenated covalent compounds occur readily lcading to phosphorus(III). arsenic(III). sulphur or germanium(IV) analogs.

From dichlorogermylene, new stable fonctionnal cyclic germylene 20 is obtained and characterized.     

Reactivity investigations of some chosen peroxo-vanadium(V), manganese(III) and chromium(VI) compounds

An interpretative account of the results of reactions in aqueous medium of a highly peroxygenated vanadium(V) complex, K [V(O_{2 3}]·3H₂O, with different organic and inorganic substrates is presented. The reactions were monitored by solution EPR spectroscopy and isolation of products at different stages of the reactions. Redox reactions between diperoxide, K[VO(O₂)₂(H₂O)] and VOSO₄ were conducted. The results of the investigation suggest that secondary oxygen exchange-reaction occurs which not only depends on but also utilises the intermediates in the primary reaction during diperoxovanadate-dependent oxidation of VOSO₄. In an interesting reactiontris(acetylacetonato)-manganese(III), Mn(acac)₃, on being reacted with a hydrogen peroxide adduct, KF·H₂O₂, and bpy and phen afforded crystalline [Mn(acac)₂(bpy)] and [Mn(acac)₂(phen)], respectively. The X-ray structural analysis of [Mn(acac)₂(phen)] showed that the compound crystallised in orthorhombic space groupPbcn. The structure consists of a pseudooctahedral Mn(II) ion being bound to two acac⁻(C₅H₅O ₂ ⁻ ) and a phen ligand with the molecule lying on two-fold axis. Reactivity profiles of two new chromium(VI) reagents viz., pyridinium fluorochromate, C₅H₅NH[CrO₃F] (PFC), and quinolinium fluorochromate C₉H₇NH [CrO₃F] (QFC), have been presented. The compounds are capable of acting as both electron-transfer and oxygen-atom-transfer agents. The X-ray analysis of PFC crystals reveals that the compound crystallises in the orthorhombic space group CmcZ₁. The structure consists of discrete pyridinium cations and CrO₃ F anions with no significant hydrogen bonding. This results in total disorder of the pyridinium cation. The tetrahedral [CrO₃ F]⁻ ion lies on a crystallographic mirror plane.     

Complexing tendencies of UO 22+ and Th4+ in their mixed ligand complexes with aminopolycarboxylates and resorcinol or its derivatives

Formation contants (log K _MAL ^MA ) of mixed ligand complexes MAL, where M = UO ₂ ²⁺ or Th⁴⁺, A = IMDA, NTA, HEDTA, EDTA, CDTA or DTPA, and L = resorcinol (res), 2-methyl resorcinol (2-Me-res), 5-methyl resorcinol (5-Me-res) or 4-chloro resorcinol (4-Cl-res), have been determined pH-metrically by the Irving-Rossotti approach at 25°C and at an ionic strength,I = 0.2(moldm⁻³KNO₃). The observed stability sequences are IMDA > NTA > HEDTA > EDTA > CDTA > DTPA, and 4-Cl-res > 5-Me-res > 2-Me-res > res with respect to primary and secondary ligands, respectively. Th⁴⁺ forms more stable mixed complexes than UO ₂ ²⁺ . The A ΔlogK values are negative due mainly to the charge repulsion involved in the complexation MA + L⇋MAL.     

Silver(I) ions-enhanced electrochemiluminescence of tris(2,2-bipyridyl)ruthenium(II)

In this paper, we demonstrate an electrochemiluminescence (ECL) enhancement of tris(2,2-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) by the addition of silver(I) ions. The maximum enhancement factor of about 5 was obtained on a glassy carbon electrode in the absence of co-reactant. The enhancement of ECL intensity was possibly attributed to the unique catalytic activity of Ag⁺ for reactions between Ru(bpy)₃³⁺ with OH. The higher enhancement was observed in phosphate buffer solutions compared with that from borate buffer solutions. This resulted from the fact that formation of nanoparticles with large surface area in the phosphate buffer solution exhibited high catalytic activity. The amount of Ag⁺, solution pH and working electrode materials played important roles for the ECL enhancement. We also studied the effects of Ag⁺ on Ru(bpy)₃²⁺/tripropylamine and Ru(bpy)₃²⁺/C₂O₄²⁻ ECL systems.     

Potentiometric flow injection determination of manganese(II) by using a hexacyanoferrate(III)-hexacyanoferrate(II) potential buffer

A highly sensitive potentiometric flow injection analysis method for the determination of manganese(II), utilizing a redox reaction with hexacyanoferrate(III) in near neutral media containing ammonium citrate is described. The analytical method is based on the detection of the change in potential of a flow-through type redox electrode detector, resulting from the composition change of an [Fe(CN)₆]³⁻-[Fe(CN)₆]⁴⁻ potential buffer solution. A linear relationship between the potential change (peak height) and the concentration of manganese(II) was found. Manganese(II) in a wide concentration range from 10⁻⁴ to 10⁻⁷ M could be determined by appropriately altering the concentration of the potential buffer from 10⁻³ to 10⁻⁵ M. The lower detection limit of manganese(II) was determined to be 1×10⁻⁷ M. The sampling rate and relative standard deviation were 20 h⁻¹ and 1.9% (n=8) for 6×10⁻⁶ M manganese(II), respectively. The proposed method was successfully applied to the determination of manganese(II) in actual soil samples obtained from tea fields. Analytical results obtained by the proposed method were in good agreement with those obtained by an atomic absorption spectrophotometric method.     

Role of Acid-Base Equilibria in the Reduction of Selenious(IV) Acid

ABSTRACT

Electroanalytical methods have been widely used for determination of Se(IV), but the nature of the reduction processes involved is not well understood. Polarographic reduction occurs in three waves (i₁, i₂, and i₃) the height of which changes with pH. We proved that in wave i₁, H₃SeO₃ ⁺ is reduced, in i₂ H₂SeO₃, and in i₃ HSeO₃ ^-. SeO₃ ^2? is not reducible. All reductions involve a transfer of six electrons and yield selenides. Limiting currents are controlled by the rate of protonation. As proton donors, in addition to H₃O⁺, the acid forms of the buffer present also act. Limiting currents increase markedly with increasing concentration of the buffer. Tenfold increase in buffer concentration can result in up to 200% increase in limiting current.     

Luminescence of NaGdFPO4:Ln after VUV excitation: A comparison with GdPO4:Ln (Ln=Ce, Tb)

The phosphors NaGdFPO₄:Ln³⁺ and GdPO₄:Ln³⁺ (for Ln³⁺=Ce³⁺ and Tb³⁺) were prepared by solid-state reaction technique, the VUV-vis spectroscopic properties of the phosphors were investigated, and we vividly compare the luminescence of Ce³⁺ and Tb³⁺ in the hosts. For phosphors GdPO₄:Ln³⁺, the band near 155 nm in VUV excitation spectrum is assumed to be the host-related absorption, and for NaGdFPO₄:Ln³⁺ the absorption is moved to longer wavelength, near 170 nm, showing the P-O bond covalency increased after fluoridation. The f-d transitions of Ce³⁺ and Tb³⁺ in the host lattices are assigned and corroborated, and it was found that the 5d states are with lower energy in NaGdFPO₄:Ln³⁺ than those in GdPO₄:Ln³⁺. For fluoridation of GdPO₄:Ln³⁺ to NaGdFPO₄:Ln³⁺, the energy change of Ln³⁺ (Ln=Ce, Tb) 5d states is consistent with that of host-related absorption.     

Spectrophotometric Study on the Extraction of 4-(2- Thiazolylazo)Resorcinol Chelates of Cobalt(II), Nickel(II), Copper(II), and Zinc(II) with Zephiramin

Abstract

The solvent extraction of the transition metals(II)4-(2-thia-zolylazo)resorcinol(TAR) chelate anions with cation of zephiramin (Z⁺ Cl^?) was spectrophotometrically investigated. The composition of the extracted species was estimated to be 2Z⁺ MR₂ ^2-, which had the absorption maxima in the same ranges of wavelength at about 550 nm, and the constant extractions were obtained at pH 6.7–10.2 for cobalt, 7.2–9.1 for nickel, 8.2–10.1 for zinc, and 8.5–10.7 for copper system. In the presence of sodium chloride, cobalt chelate could be effectively separated from the other transition metals. The extraction equilibrium was also investigated and the extraction constants were calculated.     

Mononuclear and homobinuclear vanadium(IV), chromium(III), molybdenum(III), and uranium(VI) chelates with ortho-cresolphthalein complexone

Mononuclear and homobinuclear o-cresolphthalein complexone complexes with VO²⁺, Cr³⁺, MoO⁺, and UO₂ ²⁺ have been prepared and their structures investigated. The empirical formulas, the mode of bonding, and the geometry of the complexes were obtained from elemental and thermal analyses, IR, electronic and ESR spectra, magnetic moment determinations, DC and CV polarographic studies.     

Synthesis of Lanthanide(III) Chelates by Using ‘Click’ Chemistry

The copper(I)‐catalyzed dipolar [2+3] cycloaddition reaction of an azide and a terminal alkyne is exploited in the preparation of various europium(III), terbium(III), and dysprosium(III) chelates (Schemes 1–3). By changing the nature of the alkyne and the azide, a wide range of chelates and biomolecule‐labeling reactants were obtained. The photophysical properties (Table) of the synthesized chelates are also discussed.     

Potentiometric and spectral studies of complex formation of La(III), Pr(III) and Lu(III) with aspartic acid and asparagine

The composition and stability of La³⁺, Pr³⁺ and Lu³⁺ complexes with aspartic acid and asparagine were analysed. The formation of complexes of the typeML andMHL was determined for La³⁺ and Pr³⁺ with aspartic acid, and of the typeMHL for Lu³⁺ with aspartic acid. For La³⁺, Pr³⁺ and Lu³⁺ with asparagine the formation ofML(OH) complexes was observed. By means of¹H NMR and¹³C NMR studies the participation in the coordination of both -COOH groups was determined for aspartic acid, whereas for asparagine the participation of the -COOH group was determined in complexes with La³⁺, Pr³⁺, and of the -COOH and the -NH₂ groups in the complex with Lu³⁺.

---

Potentiometrische und spektroskopische Untersuchungen an La(III), Pr(III) und Lu(III)-Komplexen von Asparaginsäure und Asparagin

Zusammenfassung Die Zusammensetzung und die Stabilität von La³⁺, Pr³⁺ und Lu³⁺-Komplexen mit Asparaginsäure und Asparagin wurden untersucht. Es wurde die Bildung von La³⁺ und Pr³⁺-Komplexen des TypsML undMHL, und ein Lu³⁺-Komplex des TypsMHL mit Asparaginsäure festgestellt. Für diese drei Lanthaniden wurde auch die Bildung von Komplexen des TypsML(OH) mit Asparagin beobachtet. Mit Hilfe von¹H-NMR und¹³C-NMR-Untersuchungen wurde für Asparaginsäure die Teilnahme der beiden -COOH-Gruppen, für Asparagin die Teilnahme der -COOH-Gruppe in den Komplexen mit La³⁺, Pr³⁺ und der-COOH und -NH₂-Gruppen in dem Komplex mit Lu³⁺ an der Koordinierung festgestellt.

     

Synthesis and characterization of Mn(II), Au(III) and Zr(IV) hippurates complexes

Mn(II), Au(III) and Zr(III) complexes with N-benzoylglycine (hippuric acid) (abbreviation hipH) were synthesized and characterized by elemental analysis, molar conductivity, magnetic measurements, spectral methods (mid-infrared, (1)H NMR, mass, X-ray powder diffraction and UV/vis spectra) and simultaneous thermal analysis (TG and DTG) techniques. The molar conductance measurements proved that all hippuric acid complexes are non-electrolytes. The electronic spectra and magnetic susceptibility measurements were used to infer the structures. The IR spectra of the ligand and its complexes are used to identify the type of bonding. The kinetic thermodynamic parameters such as: E*, DeltaH*, DeltaS* and DeltaG* are estimated from the DTG curves. The free ligand and its complexes have been studied for their possible biological antifungal activity.     

Comparison of Partial Least Squares Regression and H-Point Standard Addition Method for Simultaneous Spectrophotometric Determination of Zinc, Cobalt and Nickel by 1-(2-Pyridylazo)2-Naphthol in Micellar Media

Simultaneous spectrophotometric methods are described for the determination of Zn²⁺, Co²⁺ and Ni²⁺ by 1-(2-pyridylazo)2-naphthol (PAN) in micellar media, using absorbance correction-H-point standard addition method (HPSAM) and partial least squares (PLS) regression. The ligand and its metal complexes, i.e. Zn²⁺-PAN, Co²⁺-PAN and Ni²⁺-PAN, were made water-soluble by the neutral surfactant Triton X-100, and therefore extraction with organic solvents was no longer required. Formation of all of these complexes was complete within 10min at pH 9.2. The linear range was 0.1–1.5mgL^–1 for Zn²⁺, 0.1–2.0mgL^–1 for Co²⁺ and 0.1–2.0mgL^–1 for Ni²⁺. The relative standard deviation (RSD) for the simultaneous determination of 0.50mgL^–1 each of Zn²⁺, Ni²⁺ and Co²⁺ by applying the H-point standard addition method was 2.55%, 2.04% and 3.70%, respectively. The total relative standard error for applying the PLS method to 9 synthetic samples in the linear ranges of these metals was 1.8%. Interference effects of common anions and cations were studied, and both methods were applied to the simultaneous determination of Zn²⁺, Co²⁺ and Ni²⁺ in alloy samples.     

Cd2+ and Zn2+ Complexes with 2,4,6‐Tri(2‐pyridyl)‐s‐Triazine and Terephthalate for Rapid,High‐Capacity Adsorption of Congo Red

Three crystal complexes were designed and synthesised through the solvothermal method, with Cu²⁺, Zn²⁺, and Cd²⁺ ions as the metal centres and 2,4,6‐tri(2‐pyridyl)‐s‐triazine (TPTZ) and terephthalate (BDC²⁻) as the ligands. Their compositions were determined to be Cd(TPTZ)Cl₂ (Cd‐MOF), {[Zn(TPTZ)(BDC)] ⋅ 3H₂O}_n (Zn‐MOF), and Cu₂(PCA)₂(BDC)(H₂O)₂ (Cu‐MOF) (PCA⁻=2‐pyridinium amide), respectively. Cd‐MOF can adsorb 90 % of Congo red (CR) in 10 s at room temperature and atmospheric pressure, and CR removal was complete at 20 s over a wide pH range. The adsorption capacity for CR reached 1440 mg g⁻¹ in 5 min. Selective adsorption was demonstrated in mixed dyes. The adsorption kinetic data agree well with the pseudo‐second‐order kinetic model. The Temkin model was successfully used to evaluate the adsorption isotherms of CR on Cd‐MOF at room temperature, suggesting that adsorption occurs through a hybrid of monolayer and multilayer mechanisms.