Organophosphines in PtP2Si2 derivatives – structural aspects

Abstract

In this review, the structural data of monomeric platinum(II) complexes with inner coordination spheres of Pt(η²-P₂L)(SiL)₂, Pt(η²-P₂L)(η²-Si₂L) and Pt(η²-P,SiL)₂ are classified and analyzed. These complexes crystallize in three crystal systems: monoclinic (8 examples), triclinic (4 examples) and orthorhombic (4 examples). Distorted square-planar environments about the Pt(II) atoms are built up by combination of homobi-P,P with two monodentate Si donor ligands; homobi-PP with homo-Si,Si donor ligands, or heterobi-P,Si donor ligands. The chelating ligands create metallacycles with the following angles: 65.0° (SiOSi) < 83.1° (SiC₂Si) < 85.2° (PC₂P) < 88.8° (SiSi₂Si)). The mean Pt-P and Pt-Si bond distances in Pt(η²-P₂L)·(SiL)₂ complexes are 2.319 and 2.365?Å; in Pt(η²-P₂L)(η²-Si₂L) the values are 2.316 and 2.360?Å. The complex [Pt{η²-Me₂P(C₂B₁₀H₁₀)SiMe₂}₂] exists in two isomeric forms, a monoclinic cis- and a triclinic trans-isomer. The structural data are compared and discussed with the complexes of inner coordination spheres: Pt(η²-P₂L)(XL)₂ (X?=?O, N, CN, BL, Cl, SL, SeL, Br, or I) and Pt(η²-P₂L)(η²-X₂L) (X?=?OL, NL, SL or SeL).     

Ternary Complex Nickel(II)/3-(4′,5′-Dimethyl-2′-Thiazolylazo)-2,6-Dihydroxybenzoic Acid/Cyanide. Spectrophotometric Determination of Nickel

Abstract

A spectrophotometric method for nickel has been developed based on the formation of a ternary complex in the system Ni(II)/3-(4′,5′-dimethyl-2′-thiazolylazo)-2,6-dihydroxybenzoic acid/cyanide at pH 9.2 (borate buffer), which allows the determination of 0.05–0.47ppm of nickel (ε = 3.53×10⁴ 1.mol^?1. cm^?1) at 538nm. Interferences have been studied and the method applied to the determination of nickel in low alloy steels.     

Spectrophotometric Determination of Ceftazidime in Pharmaceutical Preparations Using Neocuproin as a Complexing Agent

Abstract

A simple and reproducible spectrophotometric method for the assay of ceftazidime with neocuproin-copper(II) reagent has been developed. The procedure is based on the drug in an acidic medium, subsequent formation of yellow ternary complex in citrate buffer solution (pH 4.2), and measurement at 454 nm. Beer's law is obeyed in the range 15.0–40.0 µg mL^?1 with correlation coefficient r ² = 0.9995. The procedure holds good accuracy and precision when applied to the analysis of ceftazidime in powder for injection with good recovery percent ranging from 100.17±1.0 without interference from additives.     

Selective Spectrophotometric Determination of Palladium (II) With 2-(5-Bromo-2-Pyridylazo)-5-(Diethylamino)-Phenol

Abstract

A spectrophotometric study of the Pd(II) complex of a reagent 2-(5-Bromo-2-Pyridylazo)-5-(diethylamino)-Phenol (5-Br-PADAP) is presented. A violet complex is formed at pH 3.53, and shows maximal absorbance at 585 nm with molar absorptivity of 3.86 × 10⁴ 1. mol^?1 cm^?1. Beer's law is obeyed up to 50 μ of Pd(II). The method offers the advantages of simplicity, high precision, requires no extraction and is very selective, where 5.0 mg Pt(VI) and 0.3 mg Au(III) ions do not interfere.     

Li2O-TiO2-SiO2-P2O5和Li2O-TiO2-Al2O3-P2O5体系锂离子固体电解质的制备及性能研究

一些具有NASICON型网格结构的固体电解质具有高的电导率和好的稳定性,NASICON的意思是Na Super Ionic Conductor[1]。当NaZr2(PO4)3中P5 被Si4 部分取代时便可以得到具有NASICON结构的Na1 xZr2SixP3-xO12体系,其具有高的钠离子电导率。然而有相同结构的Li1 xZr2SixP3-xO12体系的离子电导率却很低,这是因为Li 半径太小,而NASICON三维网格结构的离子通道太大,两者不匹配而使电导率下降[2]。但当LiZr2(PO4)3中Zr4 被离子半径小些的Ti4 取代,所得LiTi2(PO4)3的通道就与Li 半径相匹配,适合于锂离子的迁移,从而使其电导率…     

The Use of the CS2N− 3/HSO− 3/O2 Reaction for the Analytical Determination of Dissolved Oxygen

Abstract

A new analytical Spectrophotometric method has been developed for the determination of dissolved O₂ in the range 4.6 × 10^?6?4.1 × 10^?5M, based on the CS₂N^? ₃/HSO^? ₃/O₂ reaction. In one single experiment 2.3 × 10^?5 M of oxygen can be determined with an uncertainty of ± 7 × 10^?7M for a confidence level of 95%.     

Spectrophotometric Method for the Estimation of Vitamin C in Drug Formulations

Abstract

The use of 1-chloro-2, 4-dinitrobenzene is described for spectrophotometric estimation of ascorbic acid. The procedure is based on the interaction of ascorbic acid with 1-chloro-2, 4-dinitrobenzene in alkaline medium. The product absorbs maximally at 380 nm and has the molar absorptivity 0.14 × 10⁴1 mole^?1cm^?1. Beer's law is obeyed in the concentration range 0.12–0.6 mg/10ml of ascorbic acid.     

GC-MS Assay For 9α, 15(S)-Dihydroxy-11-Oxo-thromba-5(Z), 13(E)-Dien-1-oic Acid

Abstract

The title compound (TXB₂?M) is a quantitative index of thromboxane A₂ synthesis in the human. We developed a method for its determination in urine based on the use of the ¹³C-labeled methyl ester derivative of the analyte as internal standard and GC-EIMS. the interassay coefficient of variation (CV) was 5.3% (N=4) and the intraassay CV ranged from 2.6 to 8.2% (N=3). the equation of the regression curve correlating the amounts added and recovered was Y=0.932X+3.99 (R=0.9947). the relative recovery of TXB₂?M from nine urine specimens was 99.8 ± 2.8% (mean ± SEM). the mean (±SD) 24-hr output in six healthy male subjects was 1371 ± 307 ng, and in six females it was 1176 ± 418 ng. Concentrations as low as 200 pg/ml of urine can easily be measured with this procedure if one uses 50 ml of urine for the analysis.     

Determination of 2,6-Dichlorophenol by Surface-Enhanced Raman Scattering with Molecular Imprinting

A novel method has been reported for 2,6-dichlorophenol using surface-enhanced Raman scattering (SERS). SiO₂/gold composites were selected as the SERS substrates to provide the response of gold nanoparticles. Molecular imprinting was subsequently used for the development of a specific detector to 2,6-dichlorophenol with precipitation polymerization. The molecularly imprinted polymer provided sensitive and selective SERS detection for the determination of 2,6-dichlorophenol. The intensity and concentration obeyed a linear relationship from 1?×?10^?5 to 1?×?10^?9?mol?L^?1 2,6-dichlorophenol. The sensitivity of SERS with the molecularly imprinted polymers provides a promising approach for practical analysis.     

High Efficiency Annular Denuder for Formaldehyde Monitoring

Abstract

A practical and correct methodology for evaluating CH₂O in air without sampling artifact formation is presented. Formaldehyde is collected on an annular denuder coated with bisulfite-triethanolamine. The sorbent layer is extracted with water and the solution analyzed by the chromotropic acid (CTA) procedure. Sorption efficiency and loading capacity have been investigated along with storage stability.

Results of laboratory validation studies have indicated that a small annular denuder was able to sample about 300 μg CH₂O without an appreciable decrease in the initial collection efficiency (99% at 2.5 1 min^?1).

Tests on storage stability before and after exposure have also demonstrated that both oxidation of bisulfite and release of CH₂O did not occur for time periods as long as 1 month.     

A Comparative Study on Spectrophotometric,Conductometric and Potentiometric Determination of Ascorbic Acid

Abstract

A comparison has been made on the selectivity, accuracy and precision of spectrophotometric, conductometric and potentiometric methods for the determination of ascorbic acid in water which is based on the reduction of gold(III) ion by ascorbic acid. Gold(III) ion forms a complex with gelatin in alkaline medium which on reduction with ascorbic acid produces coloured gold sol. The sol shows an absorption maximum at 540 nm with molar absorptivity of 2.3×10^?3litre mol^?1 cm^?1 and the Sandell's sensitivity of 7.6 × 10^?2 μgcm^?2. The relative standard deviation is 0.22% and the confidence limit (20 determinations, 95%) is 2.0 ± 0.009%. To examine the extent of sensitivity of the spectrophotometric method the proposed method is compared with the sensitivities of the conductometric and potentiometric methods.     

Flotation Spectrophotometric Determination of Aluminium with Alizarin

ABSTRACT

Aluminium was determined in a weakly alkaline medium by reaction with alizarin at trace level. Flotation of the complex was carried out with heptane, followed by dissolution in N, N-dimethylformamide (DMF) for subsequent spectrophotometric determination. The molar absorptivity was 2.92×10⁵ mol^? cm^? at 518 run. Beer's law was obeyed in the range 5–80 μg/1 and the detection limit was 0.4μg/l.

The reliability of the procedure was confirmed by determination of a sample of milk with Graphite Furnace Atomic Absorption Spectrophotometric method (GFAAS). The precision and accuracy of the method were both acceptable via F and tests at the 95% confidence level.     

Study on Complex of Re(III) with 3, 5-Br2-DMPAP by Electrochemistry and Application

ABSTRACT

The electrochemical character of a new reagent, 2-(3, 5-Dibrome-2-pyriclyiazo)-5-dimethylaminophenol(3, 5-Br₂-DMPAP) was studied in HAc-NaAc medium at pH=3.50. In single sweep polarography, the reduction potential of the complex wave (-1.05V) is more negative than that of the free ligand(-1.01V). The complex wave was proven to be an adsorption wave. The composition ratio of the complex was formed to be 1:1 using a molar ratio method. The current of the adsorptive peak at-1.05V was directly proportional to the concentration of Re(III) in the range of 1.5× 10^?8～7.0×10^?5mol/l. The microamount of Re in several samples of Chinese cigarettes determined with satisfactory accuracy and precision.     

An automated spectrophotometric field monitor for water quality parameters : Determination of nitrate

An automated spectrophotometric field monitor is described for the determination of nitrate in river water. The bias, precision and linear calibration range of the monitor were determined in the laboratory. Samples taken from six locations on the River Frome in Dorset were analyzed for nitrate content by the monitor, and the results obtained were in good agreement with those obtained by two spectrophotometric reference methods. The relative standard deviation for 672 replicate injections of a 7.7 mg l^?1 NO₃ standard over a 14-day period was 1.4%, during which time 2.51 of the colour reagent and 2.5 1 of the ammonium chloride solution were consumed. The linear calibration range of the procedure was 0–12 mg l^?1 NO₃-N. Results are also presented for a four-day field trial on the River Frome.     

Extract-Photometric Determination of Vanadium with Isophthaldihydroxamic Acid

Abstract

The spectrophotometric study of violet complex isophthaldihydroxamic acid-vanadium extracted into solution of trioctylmethylammonium chloride in ethylacetate was made (λ_max = 380 nm, ? = 7500 l.mol^?1.cm^?1; λ_max = 510 nm, ? = 5510 l.mol^?1 .cm^?1; stoichiometries, 1:1 and 1:2, V:reagent). A new method for the extract-spectrophotometric determination of V(V) in the range 14–80 μg of vanadium is proposed.     

Rubidium Determination In Mineral and Thermal Waters By Atomic-Absorption Spectrometry

Abstract

A new procedure for rubidium determination in mineral and thermal waters using flame atomic-absorption spectrometry is described. to supress ionisation interference potassium solution was added. Rubidium can be determined in presence of Ca, Mg, Sr, Li, Cs, Fe, Al, CO² ₃, F^? and S^2? at higher levels that levels of these elements in waters. the precision and accuracy of the method were also investigated. In 163 mineral and thermal waters analysed, the rubidium concentration range is between 0.08 to 0.84 μg mL^?1.     

Extraction Spectrophotometric Determination of Trace Chlorine Dioxide with Methylene Blue

Abstract

The coloration reagent - leucomethylene blue, the reduction product of methylene blue, is used to determine the concentration of chlorine dioxide in the presence of Cl₂ and anion species such as OCl^?, ClO₂ ^? and ClO₃ ^?. This simple spectrophotometric method is performed by using the extractant 1,2-dichloroethane at pH 1.3. The linear range of ClO₂ measurement extends to 0.95 mgl^?1 with a detection limit of 0.02 mgl^?1. The presence of chlorine and hypochlorite ion can be masked by oxalic acid. The permissible maximum concentration of ClO₂ ^? is 2.0 mgl^?1, and ClO₃ ^? anion does not interfere with the measurement.     

ZUR KENNTNIS DES NATRIUMDIPHENYLPHOSPHINOFORMIATS Ph2PCOONa1

Abstract

Ph ₂ PCOONa 2, hergestellt dutch Reaktion von Ph₂PNa mit CO₂, wird in protischen Medien rasch unter Bildung von Ph₂PH and CO₂ hydrolysiert. Die Hydrolyse verlauft in Natronlauge sehr viel langsamer and es bilden sich zusätzlich geringe Mengen Ph₂P(O)O^? und HCOO^?, Aus 2 and stöchiometrischen Mengen RI bilden sich tertiäre Phosphine Ph₂PR (R[dbnd]Me, Et) während mit überschüssigem MeI das Phosphoniumsalz [Ph₂PMe₂]I erhalten wird. Ph₂PCOOMe, Ph₂PCOOSiMe₃ bzw. Ph₂PCSSNa wurden durch Umsetzung von 2 mit (MeO)₂SO₂, Me₃SiCl bzw. CS₂ synthetisiert. Ph₂P(O)ONa and Ph₂P(S)SNa entstanden bei der Reaktion von 2 mit O₂ oder S₈ in Benzol.

Concerning Sodiumdiphenylphosphinoformiate Ph2PCOONa¹.

Ph₂PCOONa 2, prepared from Ph₂PNa and CO₂, is readily hydrolyzed in protic media with formation of Ph ₂ PH and CO₂. Hydrolysis is much slower in NaOH and small quantities of Ph₂P(O)O^? and HCOO^? are additionally formed. Reactions of 2 with RI in stoichiometrical amounts gave tertiary phosphines Ph₂PR (R[dbnd]Me, Et) while the phosphonium compound [Ph₂PMe₂]I resulted from 2 and MeI in excess. Ph₂PCOOMe, Ph₂PCOOSiMe₃ or Ph₂PCSSNa were obtained from 2 and (MeO)₂SO₂, Me₃SiCl or CS₂. Ph₂P(O)ONa and Ph₂P(S)SNa were isolated when 2 was reacted with O₂ or S₈ in benzene.     

Spectrophotometric Study of 1, 3-Cyclohexanedione Bisthiosemicarbazone Monohydrochloride -Bi (III) Complex. Determination of Bi (III)

Abstract

The spectrophotometric study was made of red-violet 1, 3-cyclohexanedione bis-thiosemicarbazone-Bi (III) in an acidic dimethylformamide-water solution (λ_max = 540 nm, ? = 3.3 × 10^?4 1. mol^?1. cm^?1, stoichiometry 3:1, apparent stability constant (6.0 × 10¹⁰). A new method for the spectrophotometric determination of Bi (III) is proposed for concentrations between 0.7 and 7.4 ppm. The relative error (95 % confidence level) is 0.5 % for 3.7 ppm of Bi (III).

The extraction with methyl isobutyl ketone of the red-violet complex was also studied spectrophotometrically (λ_max = 550 nm, ? = 3.34 × 10⁴ 1. mol^?1.cm^?1, stoichiometry 2:1). A new method for the extraction-spectrophotometric determination of Bi (III) is proposed for concentrations, in aqueous phase, between 0.2 and 1.2 ppm. The relative error (95 % confidence level) is 0.8 % for 0.9 ppm of Bi (III).     

Synthesis,crystal structure and catalytic performance of bis (imino)pyridyl nickel complexes

Two new Ni(II) complexes of 2,6-bis[1-(2,6-diethylphenylimino)ethyl]pyridine (L¹), 2,6-bis[1-(4-methylphenylimino)ethyl]pyridine (L² ) have been synthesized and structurally characterized. Complex Ni(L¹)Cl₂?·?CH₃CN (1), exhibits a distorted trigonal bipyramidal geometry, whereas complex Ni(L¹)(CH₃CN)Cl₂ (2), is six-coordinate with a geometry that can best be described as distorted octahedral. The catalytic activities of complexes 1, 2, Ni{2,6-bis[1-(2,6-diisopropyl-phenylimino)ethyl]pyridine} Cl₂?·?CH₃CN (3), and Ni{2,6-bis[1-(2,6-dimethylphenylimino) ethyl]pyridine}Cl₂?·?CH₃CN (4), for ethylene polymerization were studied under activation with MAO.