Selective Amperometric Determination of Thorium by Ethyl Cyanoglyoxalate Phenyl-2-Carboxylic Acid Hydrazone

Abstract

The reagent ethyl cyanoglyoxalate phenyl-2-carboxyllc acid hydrazone has been developed for the selective amperometric determination of thorium. Commonly associated ions like UO²⁺ ₂, Pe³⁺, La³⁺, Ce⁴⁺, and Zr⁴⁺ do not interfere even when present in ten fold molar excess. 23μg to 4.6mg thorium can be determined within an error of ±1.5 percent.     

Extraction Von Molybdän(V) MIT O,O, S-Tripropyldithiophosphat Aus Salzsauren Lösungen

Abstract

The solvent extraction of molybdenum with o,o,s-tripropyldithiophosphate from hydrochloric acid has been studied. The extractable species is H₂[MoOCl₅] .2 (C₃H₇O)₂-P(S)SC₃H₇ and the thiophosphate can be used to separate molybdenum from Th, Zr, Ti⁴⁺, V⁵⁺, Nb, Ta, Cu²⁺, Fe²⁺, Co²⁺, Ni and Mn²⁺.     

Bismuthiol II as an analytical reagent

Summary Lead was estimated as Bismuthiol II complex of composition (C₈H₅N₂S₃)₂Pb by precipitating it from its chloride or nitrate solution in presence of a mineral acid, acetic acid, tartrate or cyanide. The estimation is quantitative up to a maximumph of about 6.5. The lead-Bismuthiol II complex is stable up to about 311° C and the conversion factor is 0.315. The method affords a complete separation of lead from alkalis and alkaline earths, Be²⁺, Mg²⁺, Zn²⁺, Mn²⁺, Co²⁺, Ni²⁺, Fe²⁺, Fe³⁺, Cr³⁺, Al³⁺, rare earths, Ti⁴⁺, Zr⁴⁺, Th⁴⁺, UO₂ ²⁺, Pd²⁺, As³⁺, Sb³⁺, Cl^–, SO₄ ^2–, PO₄ ^3–, AsO₄ ^3–, MoO₄ ^2– and WO₄ ^2–. Among the sulphide group members Ag⁺, Au³⁺, Hg⁺, Hg²⁺, Tl⁺, Tl³⁺, Cd²⁺ and platinum metals, except Pd²⁺, interfere while oxidising agents decompose the excess reagent. Bi³⁺, Cu²⁺ and Sn²⁺, do not interfere up to a maximum limit of 30 mg, 50 mg, and 250 mg respectively.Part I: see Z. analyt. Chem. 154, 262 (1957).     

Analytical aspects of some organic acids

Summary A direct titrimetric method for the estimation of iron(III) has been developed, which involves the adjustment of concentration of iron(III) andPh, dilution, addition of 1 ml of 2% indicator solution and titration with EDTA (30° to 35° C). It is based on the fact that the iron(III) forms a blue coloured complex which is destroyed at the 11 molar ratio making the end-point of the titration. Quantity of iron(III) as small as 23.2 mg can be titrated accurately when present in a volume of 100 ml. Study of interferences revealed that quite a number of elements like Be²⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, UO₂ ²⁺ and Mn²⁺ does not interfere, whereas much interference is caused by Cu²⁺, Zn²⁺, Pb²⁺, Fe²⁺, Co²⁺, Ni²⁺, ZrO²⁺, V0²⁺, Al³⁺, Cr³⁺, Ti⁴⁺, Ce⁴⁺ and Th⁴⁺. The method proposed for iron(III) is selective and should be of considerable use in many cases.Part III: See Z. analyt. Chem. 167, 332 (1959).     

Heavy Metal Removal from Synthetic Solutions with Magnetic Beads Under Magnetic Field

The aim of this study is to prepare magnetic beads which can be used for the removal of heavy metal ions from synthetic solutions. Magnetic poly(ethylene glycol dimethacrylate‐vinyl imidazole) [m‐poly(EGDMA‐VIM)] beads were produced by suspension polymerization in the presence of magnetite Fe₃O₄ nano‐powder. The specific surface area of the m‐poly(EGDMA‐VIM) beads was found to be 63.1 m²/g with a size range of 150–200 µm in diameter and the swelling ratio was 85%. The average Fe₃O₄ content of the resulting m‐poly(EGDMA‐VIM) beads was 12.4%. The maximum binding capacities of the m‐poly(EGDMA‐VIM) beads were 32.4 mg/g for Cu²⁺, 45.8 mg/g for Zn²⁺, 84.2 mg/g for Cd²⁺and 134.5 mg/g for Pb²⁺. The affinity order on mass basis is Pb²⁺>Cd²⁺>Zn²⁺>Cu²⁺. Equilibrium data agreed well with the Langmuir model. pH significantly affected the binding capacity of the magnetic beads. Binding of heavy metal ions from synthetic wastewater was also studied. The binding capacities were 26.2 mg/g for Cu²⁺, 33.7 mg/g for Zn²⁺, 54.7 mg/g for Cd²⁺ and 108.4 mg/g for Pb²⁺. The magnetic beads could be regenerated up to about 97% by treating with 0.1 M HNO₃. These features make m‐poly(EGDMA‐VIM) beads a potential candidate for support of heavy metal removal under magnetic field.     

p-tert-Butyldihomooxacalix[4]arene/p-tert-Butylcalix[4]arene: Transition and Heavy Metal Cation Extraction and Transport Studies by Ketone and Ester Derivatives

The binding properties of two phenylketones (2a and 3a) and two ethylesters (2b and {3b) derived from p-tert-butyldihomooxacalix[4]arene or from p-tert-butylcalix[4]arene, in the cone conformation, towards transition (Ag⁺, Ni²⁺, Cu²⁺, Co²⁺, Zn²⁺, Fe²⁺ and Mn²⁺) and heavy (Cd²⁺, Hg²⁺ and Pb²⁺) metal cations have been determined by extraction studies with metal picrates and liquid membrane transport experiments with the same salts. The affinity of these ligands for Ag⁺ has also been investigated by ¹H NMR spectroscopy. Both ketones are better extractants than the esters, and show a strong preference for Ag⁺, while Cu²⁺ is the most extracted cation with the esters. ¹H NMR titrations with AgSO₃CF₃ indicate 1 : 1 complexes for all ligands, those with ketones are more stable, on the NMR time scale, than those with esters. Both esters are good carriers for Ag⁺, and 2b exhibits the highest transport rate (4.7 mol h^-1) found until now with dihomooxacalix[4]arene derivatives.     

Lipophilicity of Metallic Complexes of 4-Methoxyphenyl - 4' - Chlorobenzoylhydrazine as Estimated from Principal Component Analysis of thin Layer Chromatographic Retention Data

ABSTRACT

The relative lipophilicity of ten metallic complexes of 4-methoxyphenyl-4'-chlorobenzoylhydrazine with Cu²⁺, Co²⁺, Mn²⁺, Ni²⁺, Pd²⁺, Fe³⁺, Cr³⁺, La³⁺, Ce⁴⁺ and UO₂ ²⁺ with potentially anti-inflammatory properties have been determined by reversed-phase thin-layer chromatography using C₁₈ plates and water-methanol mixtures as eluents. The R_F values of each compound increased linearly with increasing concentration of methanol in the eluent. Principal component analysis allowed a more rational and objective estimation and comparison of lipophilicity determined by RPTLC. Scatterplots of the scores onto a plane described by the first two components showed clustering of the complexes according to the nature of the central cation, obtaining in this way a "congeneric lipophilicity chart". Generally, the presence of cation increases the lipophilicity expressed as scores along the first principal component, practically in the same way. This means that the lipophilic behavior of metallic complexes depends firstly of the structure of ligand. However, the most lipophilic effect was observed in the case of Cu²⁺, Pd²⁺, La³⁺ and Cr³⁺.     

Prediction of KSP from Rf Values: Thin Layer Chromatography of 47 Metal Ions on Stannic Arsenate in Aqueous Hydrochloric Acid Systems

Abstract

The adsorption behaviour of 47 metal ions has been studied in aqueous HCl systems using stannic ersenate layers. The effect of solvent pH on R_f alongwith the complexation effect of HCl has been investigated. On the basis of R_f values the K_SP of some metel arsenates have been predicted. HCl has been utilized to resolve some binary and ternary mixtures such as Be²⁺ - Mg²⁺, Zr⁴⁺ - La³⁺, Th⁴⁺ - Ce⁴⁺, Th⁴⁺ - UO²⁺ ₂, Cr³⁺ - Mo⁶⁺ or W⁶⁺, Sb³⁺ - Bi³⁺ - Cd²⁺ and Ag⁺ - Cu²⁺ - Cd²⁺.     

Extraction Chromatography of Pd2+-Thiourea Complex

Abstract

The Pd²⁺-thiourea complex formed in perchloric acid medium in the presence of NaCIO₄., has been extracted quantitatively into tri-N-butyl phosphate (TBP) supported as a stationary phase on a column of Voltalef (polychloro-trifluoro ethylene). The complex was eluted with water and determined by atomic absorption spectrometry and polarography. Pd²⁺ can be estimated in the presence of Ir⁴⁺ and Au³⁺, but Pt⁴⁺ interferes seriously.     

Preconcentration of albumin on silica with attached groups of polyoxyethylated isooctyl phenol

The potencies of silica with attached groups of polyoxyethylated isooctyl phenol (SiO ₂ -TX) as an adsorbent for the solid phase extraction (SPE) preconcentration of bovine serum albumin (BSA) in urine are examined. SiO₂-TX is shown to effectively extract BSA (up to 96%) as an ion associate with cationic (at pH 8) and anionic (at pH 1.5) surfactants. The maximal capacity of SiO₂-TX to BSA makes 33 mg/g in the presence of octylpyridinium bromide, 27 mg/g in the presence of cetyltrymethylammonium bromide or sodium dodecylsulfate with the linearity range in Henri’s area up to 23 and 20 mg/g of SiO₂-TX, respectively; the distribution coefficients attain 1.8 × 10³ mL/g. BSA is eluted quantitatively with 1–4 mL of acetonitrile containing NaOH, which makes possible the use of adsorbent for the reaction of protein with trifluoroethanol (TFE) before its photometric determination by the Lowry method. The influence of accompanying urine components is studied, i.e., urea, glucose, Na⁺, K⁺, Mg²⁺, chlorides, and phosphates, on the efficiency BSA extraction from model aqueous solutions on SiO₂-TX. The detection limit for BSA makes 4 mg/L and the analytical range, from 12 to 140 mg/L.     

PREPARATION AND STRUCTURE OF TETRAMETHYLAMMONIUM HYDROGEN TRIPEROXOTRIMOLYBDODISULFATE TRIHYDRATE, [N(CH3)4]3[H(SO4)2-(MoO2(O2))3]· 3H2O

Abstract

A novel peroxopolyoxomolybdate compound, [N(CH₃)₄]₃ [H(SO₄)₂ (MoO₂(O₂))₃] · 3H₂O, has been obtained from a strongly acidic aqueous solution of a molybdate-sulfate system as the monoclinic crystal of P2/n, a = 13.497(3), b = 15.231(4), c = 32.603(2) Å, β = 103.113(9)°, and V = 6577(2) ų. The final R-value was 0.0986 for 395 parameters using 7162 reflections. Each of the two crystallographically independent polyanions contains three molybdenum atoms with five O^2?, one O₂ ^2?, and two sulfate groups, one of which is a tripod ligand apical to the molybdenum plane, and the other is a bipod ligand equatorial to the Mo plane.     

Heterometric microdetermination of cobalt using nitron as titrant

Small amounts of cobalt (0.1–0.25 mg in 15 ml solution) were determined heterometrically in the presence of potassium thiocyanate by titration with nitron acetate solution. A strong electrolyte (Na₂SO₄) must be added to obtain a clear end point. The titration can be carried out in the presence of a number of diverse ions e.g., Cd²⁺, Ni²⁺, Pb²⁺, Mn²⁺, Cr³⁺, MoO₄^2?, WO₄², CrO₄^2?, NO₃^?, Au³⁺, Pt⁴⁺ without interference; Fe³⁺ can be masked with NaF. Copper and zinc interfere and must be absent. The titration takes about 2–3 min. and the maximum error was 1.5%.     

New Azothiacalix[4]arenes Containing Biheterocyclic Subunits: Extraction and Complexation Properties

New thiacalix[4]arenes 2a, 3a, 4 and 5 functionalized with biheterocyclic and azophenyl groups at the lower rim and the upper rim of the macrocycle, respectively, were synthesized and their extraction properties towards Cu²⁺, Ag⁺, Ni²⁺ and Pb²⁺ studied. The complexation properties of the bithiazolyl receptors 2a, 4 and the bipyridyl receptors 3a, 5 were investigated by fluorescence and UV–visible titrations, respectively. The stoichiometries of the complexes were determined. A stoichiometry of 1:1 was found for the Cu-2a, Ag-3a complexes and 2:1 for the Cu₂-4, Ag₂-5 complexes as a function of the number of grafted bithiazolyl groups. The association constants for the 1:1 complexes were calculated using the Benesi–Hildebrand plot and by linear regression analysis.     

Bestimmung Von Molybdän Nach Extraction Mit O,O,S - Triäthyldithiophosphat

Abstract

The interaction of molybdenum(V) with potassium thiocyanate in a medium of O,O,S-triethyldithiophosphate [(C₂H₅O)₂P(S)SC₂H₅] and ethanol at a ratio 4:1 has been studied.

The stability constant of the molybdenum(V) thiocyanate complex was determined to be 7.6 × 10² with a molar ratio Mo(v) : SCN of 1:1. A new method based on the formation of the molybdenum-thiocyanate complex in the organic phase has been developed for the determination of molybdenum in steel.     

Maleanilic Acids as Highly Selective Reagents for the Amperometric Determination of Thorium (IV)

Abstract

Thorium has been determined amperometrically at an applied e. m. f. of -1.2V with fifteen maleanilic acids. Out of these o-tolyl, p-tolyl, 1-naphthyl, 2-naphthyland 4-amino maleanilic acid were found promising analyticalreagentsand most effective. Th(IV) in the range 6.60 to 2350.0 mg per 100 ml can be determined with an error of ± 0.2%. The interference of fifty-five ions were studied and only five ions Zn(II), Pb(II), Fe(III), UO₂ (II) and Zr(IV) interfered. which could be masked by the addition of S₂O² ₃ or SCN^?, Cl^? or SO^2- ₄, SCN^? or citrate, citrate or tartrate and P₂O^4- ₇ respectively.     

Synthesis and complexing properties of four imidazolyl acetamido p-tert-butylcalix[4]arenes

Four imidazolyl acetamido p-tert-butylcalix[4]arenes 5–8 have been prepared by reacting the corresponding methyl esters derivatives 1–4 with histamine in 1:1 mixture of methanol:toluene. The yields ranged from 56 to 68%. 5–8 have been shown to be in cone conformation. The complexation behaviour of 5–8 towards monovalent metal picrates M⁺Pic⁻ with M⁺ = Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺ and divalent metal picrates M²⁺(Pic⁻)₂ with M²⁺ = Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Pb²⁺, Cd²⁺, Zn²⁺ and Co²⁺ are given. Tentative localisation of the metal cations in the receptors is given. The binding properties towards these cations have been determined along with stoichiometries of the complexes.     

Synthesis and structure of tribenzo-19-crown-6 lariat ethers

Abstract

Multistep preparative routes to a series of three new, protonionizable lariat ethers, sym-(R)tribenzo-19-crown-6-oxyacetic acids with R = H, C₃H₇, and C₈H₁₇ have been developed. The crystal structure of the synthetic intermediate sym-(hydroxy)(propyl)-tribenzo-19-crown-6 has been determined. The compound crystallized in the monoclinic space group P2₁/c with a = 8.902(4) Å, b = 10.296(5) Å, c = 27.631(9) Å, β = 97.41° with a volume of 2511.4 ų. The calculated density is 1.268 mg/mm³ with Z = 4. The final R values are R = 7.99% and R_w = 5.17% using 1558 observed reflections [F>3.0 [sgrave](F)].     

EQUILIBRIUM STUDIES OF THE REACTION BETWEEN TETRACHLOROPALLADIUM(II) ANION AND SULFOXIDES. THE FORMATION OF THE MONO-S-SULFOXIDE COMPLEXES

Abstract

The equilibrium coefficient, K₁, for the reaction [PdCl₄]^2- + RR′ SO ? [Pd(RR′ SO)Cl]^? + Cl^?, has been determined for dimethylsulfoxide, tetramethylensulfoxide, and phenylmethylsulfoxide and found to be 67, 46 and 8.8 respectively at 25°C, ü= 1.0 in 95:5 methanol-water. Values for the equilibrium constants for the dimethylsulfoxide complex are also reported at other ionic strengths. The equilibrium constants for the second stage, [Pd(Me₂SO)Cl₃]- + Me₂SO)?-[Pd(Me₂SO)₂Cl₂] + Cl^?, has been determined for dimethylsulfoxide only, K₂=2.5 × 10^?2 at 25°C (μ not controlled). The causes of the mutual destabilisation of two dimethylsulfoxides are discussed.     

Synthetic Ionophores. Part 20: Synthesis and Ionophore Character of 2-Aminothiophenol and 1,3-/1,4-Phenylene Based Silver Selective Receptors

Nucleophilic displacements of 1,3- and 1,4-bis(bromomethyl)benzenes with 2-aminothiophenol provide 1,3- and 1,4- bis(2-aminophenylthiomethyl)benzenes 3 and 11 which undergo intermolecular cyclodehydrochlorination with thiodiglycolyl dichloride and isophthaloyl dichloride to give respectively 6, 8 and 12,13. The diamine 3 and its N,N'-dibenzyl derivative 4 with pyridine-2,6-dicarbonyl dichloride give 7 and 5, respectively. The extraction and transport behaviour of these receptors have been determined towards alkali (Li⁺, Na⁺, K⁺),alkaline earth (Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺), Tl⁺, Ag⁺ and Pb²⁺ picrates.The participation of various ligating sites in binding have been evaluated through ¹³ NMR studies. The acyclic receptors 3, 4 and 11 show higher Ag⁺ selectivity than the cyclic analogs 6 and 12. In the case of acyclic receptor 3 the organisation induced by the 1,3-phenylene spacer and 2-aminophenylthio units and its flexibility generates optimal binding and selectivity towards Ag⁺. However, in cyclicreceptors 3 and 12 though the three thioether unitsare better organised, the inward placement of the NH_amide units restricts the entry of Ag⁺ into the cavity and lowers both the order of binding and selectivity. The lack of binding ability in 7due to an intramolecular NH_amide–-N_py H-bond isrestored in the N-benzyl derivative 5.     

Synthesis and Crystal Structure of the Novel Compound Mg4.5Pr79.5Mo126O312 Containing Mo3, Mo7 and Mo19 Clusters

The synthesis and crystal structure of the novel reduced molybdenum oxide Mg_4.5Pr_79.5Mo₁₂₆O₃₁₂ are presented. This compound crystallizes in the trigonal space group R-3 m with a = 11.3061(2) Å, c = 58.242(1) Å, V = 6447.5(2) Å³, and Z = 1. Refinements yield R(F ²) = 0.0433 and wR(F ²) = 0.0931 for 2827 unique reflections. The structure is built up from alternating slabs made up of molybdenum forming Mo₃, Mo₇ and Mo₁₉ clusters, praseodymium and oxygen atoms, and slabs containing isolated MoO₆ octahedra. The Pr³⁺ cations are localized either within the slabs or at their borderlines to ensure the cohesion between the slabs. Of the six crystallographically independent sites occupy by the Pr³⁺ cations, two of them also contain randomly about 15% and 20% of Mg²⁺ cations while the remaining four are fully occupied by the Pr³⁺ cations.