Speciation of Chromium in Water Samples by Cloud Point Extraction Combined with Low Temperature Electrothermal Vaporization ICP‐OES

Abstract

A new method based on cloud point extraction (CPE) separation and electrothermal vaporization inductively coupled plasma optical emission spectrometry (ETV‐ICP‐OES) detection was proposed for the determination of chromium species. Thenoyltrifluoracetone (TTA) was used as both an extractant for CPE of Cr(III) and a chemical modifier for ETV‐ICP‐OES determination. When the system temperature is higher than the cloud point temperature (CPT) of the selected surfactant, Triton X‐114, the complex of Cr(III) with TTA could enter the surfactant‐rich phase, whereas the Cr(VI) remained in aqueous solutions. Thus, an in situ separation of Cr(III) and Cr(VI) could be realized. The concentrated analyte was introduced into ETV‐ICP‐OES for determination of Cr(III) after proper disposal. Cr(VI) is reduced to Cr(III) prior to determining total Cr, and its assay is based on substracting of Cr(III) from total chromium. The main factors affecting cloud point extraction and the vaporization behavior of the analyte were investigated in detail. Under the optimized conditions, the limit of detection (LOD) for Cr(III) was 0.22 µg/L by preconcentration of a 10 mL sample solution, and the relative standard deviation (RSD) was 3.8% (C_Cr(III)=0.5 µg/mL, n=5). The proposed method was applied to the speciation of chromium in different water samples. In order to verify the accuracy of the method, a certified reference water sample was analyzed, and the results obtained were in good agreement with certified values.     

HPLC-spectrophotometric detection of trace heavy metals via ‘cascade’ separation and concentration

A cascade pre-concentration and separation system involving continuous solid-phase extraction and one-drop solvent concentration was developed to enable high-performance liquid chromatography (HPLC) determination of trace levels of Ni(II), Co(II), Cu(II), Se(IV) and Cr(VI) ions in aqueous solution via complexation with sodium diethyldithiocarbamate. The metal complexes were almost completely adsorbed on the solid phase (octadecylsilyl packed column). Ethyl acetate (eluent) containing the metal complexes was then placed in a centrifuge tube, to which a microvolume of dimethyl sulfoxide (DMSO) was added. Successful pre-concentration of the metal complexes into the DMSO phase was accomplished by removing the ethyl acetate using a compact evaporator in a water bath (40°C); 1000-fold concentration was achieved within 45 min. A portion of the residual DMSO phase was then subjected to HPLC analysis. The proposed method has high reproducibility and high sensitivity with detection limits (3σ) for Ni(II), Co(II), Cu(II), Se(IV) and Cr(VI) ions of 0.08, 0.11, 0.12, 0.44 and 0.20 µg/L, respectively. Relative standard deviations (RSDs) (n = 5) at Ni(II) 5.87 µg/L, Co(II) 5.89 µg/L, Cu(II) 6.35 µg/L, Se(IV) 7.90 µg/L and Cr(VI) 5.20 µg/L (1.0 × 10^?7 mol/L each) were 4.0%, 4.6%, 4.6%, 7.2% and 3.4%, respectively.     

Determination of Cr(VI) by portable tungsten coil electrothermal atomic absorption spectrometer after surfactant-assisted dispersive liquid-liquid microextraction

As a new developed instrument, a portable tungsten coil electrothermal atomic absorption spectrometer (W-coil ET-AAS) was first coupled with surfactant assisted dispersive liquid–liquid microextraction (SA-DLLME) to improve its analytical performance and expand its applications in this work. SA-DLLME was very simple, rapid and the extraction efficiency was considerably improved by the effect of surfactant, which was suitable to be coupled with the portable instrument in field analysis. After SA-DLLME, concentrated chromium in organic phase was directly determined on W-coil atomiser. The influence factors relevant to SA-DLLME and instrumental conditions were studied systematically. Under the optimal conditions, the limit of detection (LOD) for Cr(VI) was 0.016 µg L^?1, with sensitivity enhancement factor (EF) of 107. The relative standard deviation (RSD) for seven replicate measurements of 0.5 µg L^?1 of Cr(VI) was 4.6%. The recoveries for the spiked samples were in the acceptable range of 96.8–104%. The rapid, simple and high effective method greatly improved the sensitivity of this portable spectrometer for the determination of Cr(VI) and was applied to the analysis of ultra-trace Cr(VI) in real and certified water samples with satisfactory results.     

Ionic liquid-modified silica-coated magnetic nanoparticles; promising anion-exchange sorbent for extraction of Cr(VI)

In the present study, ionic liquid-modified silica-coated magnetic nanoparticles (MNPs) were synthesised and applied as a new anion-exchange sorbent for extraction and determination of Cr(VI) followed by inductively coupled plasma atomic emission spectrometry. The characterisation of MNPs was carried out by scanning electron microscope, Fourier transform infrared and vibrating sample magnetometer. Experimental design and response surface methodology were used for optimisation of different parameters which affect extraction efficiency of Cr(VI). Under the optimised conditions, extraction recoveries within the range of 25–33% with relative standard deviations (RSD%, n = 4) within the range of 3.0–5.0% were obtained. The limit of detection was found to be 0.1 µg L^?1. The linearity was studied in the range of 0.5-200 µg L^?1 with the determination coefficient of 0.9958. Also, calculated Errors% for determination of Cr(VI) in the range of 5-15 depict that the method offers acceptable accuracy for analysis of Cr(VI). The method was successfully applied for extraction and determination of Cr(VI) selectively in some tannery waste water samples.     

Supramolecular dispersive liquid–liquid microextraction-based solidification of floating organic drops combined with electrothermal atomic absorption spectrometry for determination of chromium species

A simple, sensitive and reliable method has been developed for separation and preconcentration of chromium (VI) from aqueous samples before determination by electrothermal atomic absorption spectrometry. The method is based on the extraction of the hydrophobic complex of chromium (VI) with ammonium pyrrolidine dithiocarbamate in the coacervates made up of decanoic acid reverse micelles in the water–tetrahydrofuran mixture. Parameters affecting the extraction efficiency of the analyte were studied and optimised. Under the optimum conditions, the linear range, enhancement factor, the limit of detection and limit of quantification were found to be 0.008–0.4 µg L^?1, 127, and 1.8 ng L^?1 and 6.0 ng L^?1, of Cr(VI), respectively. The relative standard deviation at the concentration level of 0.1 µg L^?1 Cr(VI) (n = 6) was 4.2%. Total chromium was determined after the oxidation of Cr(III) to Cr(VI) with permanganate in acidic medium. The method was successfully applied to the determination of chromium species in water and human serum samples.     

Determination of manganese (VII), chromium (VI) and nickel (II) in medicinal herb samples by cloud-point extraction and high-performance liquid chromatography

A highly sensitive method for the determination of manganese (VII), chromium (VI) and nickel (II) in medicinal herb samples is proposed. The method is based on analytes reacted with ammonium pyrrolidinedithiocarbamate (APDC) to give hydrophobic chelates (M–APDC), which were separated and enriched by cloud-point extraction (CPE) with non-ionic surfactant Tergitol TMN-6 as extractant. The surfactant-rich phase containing the chelates is determined with a high-performance liquid chromatography system. To achieve the best CPE method, the Box–Behnken design was used to study the concentration of Tergitol TMN-6, equilibrium temperature, equilibrium time as well as their interaction. What followed was the individual research for the pH of the sample solutions and the concentration of APDC. What is more, in the given optimized experimental conditions, calibration plots were found to be linear in the range of 0.0200–0.500 mg/L for Mn (VII) and Cr (VI), meanwhile 0.0500–1.00 mg/L for Ni (II), the linear correlation coefficients were between 0.996 and 0.999, the recoveries ranged from 91.8 to 97.8 % and the relative standard deviations were between 1.09 and 2.30 % (n = 3). The limits of detection were 0.164 μg/L for Mn (VII), 0.562 μg/L for Cr (VI) and 5.12 μg/L for Ni (II), respectively. The proposed method was applied to determine manganese (VII), chromium (VI) and nickel (II) in medicinal herb samples with satisfactory results.     

Speciation and determination of chromium ions by dispersive micro solid phase extraction using magnetic graphene oxide followed by flame atomic absorption spectrometry

A selective, simple and fast dispersive micro solid phase extraction method using magnetic graphene oxide (GO) as an efficient sorbent has been developed for the extraction, separation and speciation analysis of chromium ions. The method is based on different adsorption behaviour of Cr(VI) and Cr(III) species onto magnetic GO in aqueous solutions which allowed the selective separation and extraction of Cr(VI) in the pH range of 2.0–3.0. The retained Cr(VI) ions by the sorbent were eluted using 0.5 mL of 0.5 mol L^?1 nitric acid solution in methanol and determined by ?ame atomic absorption spectrometry. Total chromium content was determined after the oxidation of Cr(III) to Cr(VI) by potassium permanganate. All effective parameters on the performance of the extraction process were thoroughly investigated and optimised. Under the optimised conditions, the method exhibited a linear dynamic range of 0.5–50.0 µg L^?1 with a detection limit of 0.1 µg L^?1 and pre-concentration factor of 200. The relative standard deviations of 3.8% and 4.6% (n = 8) were obtained at 25.0 µg L^?1 level of Cr(VI) for intra- and inter-day analysis, respectively. The method was successfully applied to the speciation and determination of Cr(VI) and Cr(III) in environmental water samples.     

Speciation of Cr(III) and Cr(VI) using solid phase extraction and determination of total As inductively coupled plasma atomic emission spectrometry

An inductively coupled plasma atomic emission spectrometric (ICP-AES) method was developed for speciation and simultaneous determination of Cr and As, since these two analytes are commonly determined in various water samples in order to assess their toxicity. The objective of this research was to study the speciation of Cr(III), Cr(VI) in the presence of As(III) and/or As(V) using solid phase extraction (SPE) and ICP-AES. For these measurements, four spectral lines were used for each analyte with the purpose of selecting the most appropriate for each element. Finally with the use for first time of a cation-exchange column filled with benzosulfonic acid and elution with HCl, the speciation in solutions which contained [Cr(III)?+?Cr(VI)?+?As(V)] and [Cr(III)?+?Cr(VI)?+?As(III)] was examined. It was demonstrated that the separation of the two chromium species is almost quantitative and the simultaneous determination of chromium species and total arsenic analytes is possible, with very good performance characteristics. The estimated limits of detection for Cr(III), Cr(VI), As(III) and/or As(V) were 0.9?µg?L^?1, 1.1 µg?L^?1, 4.7 µg?L^?1 and 4.5 µg?L^?1 respectively, the calculated relative standard deviations (RSDs) were 3.8%, 4.1%, 5.2% and 5.1% respectively, and finally the accuracy of the methods was estimated using a certified aqueous reference material and found to be 5.6% and 4.8% for Cr(III) and Cr(VI) respectively. The method was applied to the routine analysis of various water samples.     

Speciation of chromium in water samples using dispersive liquid–liquid microextraction and flame atomic absorption spectrometry

A novel method for preconcentration is described for chromium speciation at microgram per liter to sub-microgram per liter levels. It is based on selective complex formation of both Cr(VI) and Cr(III) followed by dispersive liquid–liquid microextraction and determination by microsample introduction-flame atomic absorption spectrometry. Effects influencing complex formation and extraction (such as pH, temperature, time, solvent, salinity and the amount of chelating agent) have been optimized. Enrichment factors up to 275 and 262 were obtained for Cr(VI) and total Cr, respectively. The calibration graph is linear from 0.3 to 20 µg L^?1, and detection limits are 0.07 and 0.08 µg L^?1 for Cr(VI) and total Cr, respectively. Relative standard deviations (RSDs) were obtained to be 2.0% for Cr(VI) and 2.6% for total Cr (n?=?7).     

Unusual hexa-nuclear cadmium cluster functionalized phosphomolybdate as effective photoelectrochemical sensor for trace Cr(VI) detection

Photo-assisted electrochemical technique provides a promising approach towards carcinogen chromium(VI) detection, which requires reasonable catalyst design. Herein, an unusual hexa-nuclear cadmium cluster functionalized reductive phosphomolybdate hybrid as photo-electrochemical sensor was designed and synthesized with formula of {[Cd(H₂O)₂]₂[Cd(btmbp)]₂}{Cd(P₄Mo₆O₃₁H₇)₂}·20H₂O (1) (btmbp= 4,4′-bis((1H-1,2,4-triazol-1-yl)methyl)biphenyl), in which the photoactive hexa-nuclear {Cd₆} clusters cooperated with reductive phosphomolybdate [P₄Mo₆O₃₁]^12? endow the material with wide light absorption and remarkable redox activity, thus achieving efficient photo-assisted electrochemical Cr(VI) detection performance. Under visible-light assistance, the detection limit (LOD) and sensitivity of Cr(VI) is 4.17 nmol/L (0.225 ppb) and 226.32 µA L/µmol, which is apparently superior to the performance without photo-assistance (6.25 nmol/L and 106.95 µA L/µmol) and far satisfies the demands of world health organization (WHO) for potable water (50 ppb). Moreover, compound 1 showed prominent Cr(VI) detection performance in practical water samples together with remarkable anti-interference capacity and good electrochemical durability. This work provides an important guidance for designing efficient polyoxometalate-based crystalline sensors for Cr(VI) detection.     

An enzyme biosensor based on beta-galactosidase inhibition for electrochemical detection of cadmium (II) and chromium (VI)

The focus of this article is the development and optimisation of a simple, sensitive, selective biosensor for the detection of heavy metals, through inhibition of β-galactosidase (β-gal) from Aspergillus oryzae after its immobilisation on an electrochemical transducer by cross-linking with glutaraldehyde. The inhibition of β-gal by Cd(II) and Cr(VI) was demonstrated by the decrease of β-gal activity monitored by the conductometric signal. Under optimal conditions, the developed voltammetric and impedimetric biosensor, based on the specific interaction of metallic ions with beta-galactosidase that increases the electron transfer of the redox probe, presented a wide range of linearity. Detection limits of 3.12 × 10^–10 M (91.7 ng/L) were obtained, using both techniques, for Cr(VI). For Cd(II) detection limits were 2.85 × 10^–8 M (6.95 µg/L) using EIS and 3.22 × 10^–11 M (7.61 ng/L) using square wave voltammetry (SWV).     

Preconcentration of total chromium on Dowex 50W-X8 resin loaded with 2-amino-benzenethiol

Application of Dowex 50W-X8 loaded with 2-amino-benzenethiol for preconcentration of total chromium (Cr(VI) and Cr(III)) in water samples and subsequent determination by inductively coupled plasma-atomic emission spectrometry was studied. The reagent 2-amino-benzenethiol loaded onto the resin effectively reduced Cr(VI) to Cr(III) and total chromium (both Cr(VI) and Cr(III)) formed chelate complex with the reagent in the Cr(III) valence state. Experimental parameters such as preconcentration time, solution flow rates, pH, and concentration of the eluent were optimized. The method has been applied for the determination of total chromium in seawater samples in the range of 0.1–200?µg?L^?1. A detection limit of 0.3?µg?L^?1 was achieved, and the relative standard deviation was about 5%.     

Simultaneous Determination of Cephradine,L‐Arginine,and Cephalexin in Cephradine for Injection by Capillary Zone Electrophoresis

Abstract

Applying capillary zone electrophoresis (CZE) to separate the components of Cephradine for Injection: cephradine, and L‐arginine, as well as cephalexin, which is the degradation product of cephradine was studied. The best results were achieved with background electrolyte consisting of 50 mM disodium hydrogen phosphate buffer at pH 6.5 and an applied voltage of 20 kV in a bare fused‐silica capillary. The samples were injected at 50 mbar for 4 s. The capillary temperature was 25°C and the UV detection was performed at a wavelength of 195 nm. Histidine was used as internal standard (IS) to ensure acceptable precision data. The linear ranges of cephradine, L‐arginine, and cephalexin were 93.8–6255.6 µg/mL, 47.9–3195.2 µg/mL, and 6.1–405.4 µg/mL, respectively. Quantitative parameters such as accuracy, precision, limit of detection (LOD), and limit of quantitation(LOQ) were all established in CZE mode.     

Simultaneous Determination of Chromium Species in Water and Plant Samples at Trace Levels by Ion Chromatography–Inductively Coupled Plasma-Mass Spectrometry

Ion chromatography–inductively coupled plasma-mass spectrometry (IC–ICP-MS) was used for the identification and quantification of chromium species. Chromium(III) and chromium(VI) were separated and determined by IC–ICP-MS. The separation was achieved using an anion exchange column with 0.55?M HNO₃ as mobile phase. It was a particular goal of this work to exclusively use nitric acid for elution in order to reduce interferences in the ICP-MS system. Analytical figures of merit were calculated under the optimum conditions by developing calibration plots in a concentration range of 0.50–250?µg/L for both species. The detection limits for Cr(III) and Cr(VI) were 0.09 and 0.03?µg/L, respectively. Spiked recovery tests were used to evaluate the applicability of the analytical method in environmental samples, and the recoveries ranged between 97 and 103% for both analytes. The accuracy of the method for total chromium content was validated through the analysis of a spring water-certified reference material (UME 1201), and the obtained results were in good agreement with the certified value. Lettuce seedlings were cultivated to evaluate the intake levels of these species. In addition, the bioaccessibility of Cr(III) and Cr(VI) from the lettuce seedlings in simulated gastric and intestinal fluids media was examined.     

Preconcentration and Determination of Chromium Species Using Octadecyl Silica Membrane Disks and Flame Atomic Absorption Spectrometry

A novel and selective method for the fast determination of trace amounts of chromium species in water samples has been developed. The procedure is based on the selective formation of chromium diethyldithiocarbamate complexes at different pH in the presence of Mn(II) as an enhancement agent of chromium signals followed by elution with organic eluents and determination by atomic flame absorption spectrometry. The maximum capacity of the employed disks was found to be (396±3) µg and (376±2) µg for Cr(III) and Cr(VI), respectively. The detection limit of the proposed method is 49 and 43 ng·L^?1 for Cr(III) and Cr(VI), respectively. The proposed method was successfully applied for determination of chromium species Cr(III) and Cr(VI) in different water samples.     

Spectrophotometric determination of Hg(II) in water samples by dispersive liquid liquid microextraction with use ionic liquid after derivatization with a water soluble Fe(II) phthalocyanine

This study reports the synthesis of water soluble iron(II) phthalocyanine and a facile method for spectrophotometric determination of Hg(II) in environmental water samples by ionic liquid based dispersive liquid–liquid microextraction (IL-DLLME). In the method, 1-heptyl-3-methylimidazolium hexafluorophosphate (250 µL) as extraction solvent, acetonitrile (750 µL) as dispersive solvent and Triton X-100 (200 µL) as anti-sticking agent were used. After the extraction of the Hg(II) complex (Hg(II):q-Fe(II)-Pc) into thin droplets of ionic liquid, the sample was centrifuged for 4 min at 2000 rpm. The upper aqueous phase was removed and the residue diluted to 250 µL with methanol and transferred to a 250 µL cell for spectrophotometric detection at 280 nm. The linear range of the method is 0.05–1 µg/mL. The limits of detection and quantification is 0.01 and 0.03 µg/mL, respectively. The RSD for the developed method was calculated as 0.78% at 0.50 µg/mL Hg(II).     

Solid phase extraction of hexavalent chromium by Mannich base polymer wrapped flower-like layered double hydroxide

In the present work, synthesis of polymer wrapped flower-like MgAl layered double hydroxide was done through condensation of 1,4 phenylenediamine and resorcinol by p-formaldehyde. The nanocomposite was characterised with X-ray diffraction analysis, fourier transform infrared spectroscopy, thermogravimetric analysis and field emission scanning electron microscopy techniques and employed for effective adsorption of Cr(VI) from aqueous solution prior to flame atomic absorption spectrometer determination. Optimum level of effective parameters (pH, reaction time and adsorbent dosage) and their interaction was determined by response surface methodology. To investigate applicability of method for trace heavy metal adsorption, the method was employed for preconcentration of Cr(VI) in water samples. At the optimum conditions, pH = 4.5, shaking time of 15 min and adsorbent dosage of 20 mg, analytical performance of the method was evaluated and results showed that calibration curve is linear in the concentration range of 2–100 μg L^?1. Moreover, limit of detection was 0.22 µg L^?1 and relative standard deviation of six replicate experiments at initial concentration of 0.1 mg L^?1 was 3.3%. Isotherm study showed that Freundlich model can better describe adsorption behaviour as well as the sorbent showed the adsorption capacity of 62.5 mg g^?1. Moreover, thermodynamic study revealed that chromate adsorption was spontaneous and followed the endothermic path. Regeneration of sorbent was performed using 1.0 mol L^?1 of NaOH solution. The sorbent was employed for Cr(VI) determination from food additives and seawater samples.     

Application of a ternary complex of chromium(VI) with phenylfluorone for cloud point extraction-spectrophotometric speciation of Cr(VI) and Cr(III) in aqueous solutions

A cloud point extraction-preconcentration by the formation of ternary complex was applied to the determination of trace Cr(VI) in water samples. The method is based on the formation of a purplish red complex of Cr(VI) with phenylfluorone in the presence of cetyltrimethylammonium bromide in acetate buffer media and mixed micelle-mediated extraction of the complex. The use of cloud point extraction (CPE) coupled with spectrophotometric detection allows the determination of chromium at μg levels. The chemical variables affecting the analytical performance of the combined methodology were studied and optimised. The proposed method allowed the determination of chromium(VI) in the range 5–100 μg/L with good precision and accuracy and the detection limit was found to be 1.04 μg/L. The interference of concomitant ions on the CPE of Cr(VI) was investigated. Recoveries in the range of 97–102% were obtained by analysis of spiked real samples. The method was successfully applied to the determination of chromium in various water samples. The article is published in the original.     

Determination of Aluminium by Electrothermal Atomization Atomic Absorption Spectrometry in Serum to Characterize Hemodialysis Toxicity

A simple and cost-effective method is described for the determination of aluminum by electrothermal atomic absorption spectrometry (ET-AAS) in serum of hemodialysis patients and healthy subjects. The only preparative step required is the dissolution of the serum sample in 0.2% magnesium nitrate matrix modifier and separate diluents 0.01 M EDTA and 0.1% Triton X-100. The calibration curve was linear from 20 to 100 µg/L with correlation coefficients of 0.9993 and 0.9998 for EDTA and Triton X-100, respectively. The sensitivity of the method for aluminum at the 309.3 nm line was 74 pg. The instrumental and method limits of detection were 2.2 µg/L and 4.4 µg/L, respectively. The aluminum concentrations of forty serum samples from hemodialysis patients and healthy subjects were determined and the mean values were 170.9 ± 6.8 µg/L and 47.3 ± 9.3 µg/L, respectively, whereas the permissible limit for aluminum in blood serum is 10 µg/L. The high level of Al in serum was related to oral phosphate binding agents and dialysis treatment.     

Novel chromium imprinted polymer: synthesis,characterization and analytical applicability for the selective remediation of Cr(VI) from an aqueous system

In this study, we report the synthesis of chromium imprinted polymer (Cr-IP) by a simple and facile one-pot precipitation polymerization technique by using 1-vinyl imidazole as ligand and methacrylic acid as functional monomer and their application for the specific removal of toxic hexavalent chromium from aqueous media. To attain maximum adsorption capacity various components i.e. functional monomer, cross-linker, and the molar ratio of ligand, monomer, and cross-linker were evaluate. Furthermore, several parameters i.e. pH, adsorbent dose, agitation time and shaking speed were also optimized to obtained maximum adsorption efficiency. The synthesized Cr-IP was characterized by SEM, EDX and FT-IR. The kinetic data were well described by pseudo-second-order while Langmuir model is best fitted to isotherm data. The maximum adsorption capacity of Cr-IP was 76.92mg/g. The relative standard deviation, limit of detection and quantification of this method was found to be 4.7%, 0.71µg/L and 2.36µg/L. The relative selective coefficient of Cr(VI) ions and competitive ions is greater than one due to the imprinting effect. This Cr-IP polymer also possesses good reproducibility and stability. The synthesized imprinted polymer has successfully applied for elimination of toxic Cr(VI) from real water samples.